Parts of the lathe

machine

Rafael Castañeda

Cristian Camilo Romero

Members:

Parts of the lathe machine

Bed

It allows sliding of the tool holder.

Ways

precione glide tool holder

Spindle

This element holds the piece to work well according to what we need jira.

Tailstock, Tailstock Quill

Precione holds and exercises in working member.

He is extending the amount sierta

Carriage

Moves on the outer ways. Used for mounting and moving most the cutting tools.

• Split Nut:

It is used for cutting threads, the carriage is driven directly without using a clutch.

Is to mount the tool in the cutting bits are set

Tool post

Compound Rest:

This Mounted to the cross slide, it pivots around the tool post.

Apron:

Attached to the front of the carriage, it has controls for moving the cross slide.

Has a keyway, with two reversing pinion gears, either of which can be meshed with the mating bevel gear

Feed Rod

Lead Screw

It used to drive the clamping elements such as clamps or jaws, as well as to produce the linear displacement.

• Split Nut:

It is used for cutting threads, the carriage is driven directly without using a clutch.

Thanks