Post on 09-Nov-2018
PAG. 2
cityTEC - LED Washer
SPECIFICATION
• Power consumption: 60W• LED: 18*tri-3W RGB • Fuse: 1A/250V @240V 2A/125V @110V• unlinking: 1 8pcs@240V 8pcs@110V• Beam angle: 45 degree• Working temperature: -10~+40 ºC• DMX channels: 1, 3, 4, 6 CH
This series product has rich effect programs, easier operation, there are 4 working mode: ·built-in programs ·auto run ·DMX control ·slave mode
1. Built-in Programs1) Press the “MODE”, enter built-in programs mode menu “ “2) Press the “UP” or “DOWN”, select effect programsWhen LED display show , press the “setup” can enter editing environment, press “up” or “down” can select 7 built-in static color ( ), when shows , press the “setup” can ad-just the brightness of red, green, blue though “up” or “down”, and then press the “setup” can set the selected color strobe “ ” though “up” or “down” can adjust the strobe speed between When LED display shows , the first time press the “setup”, will show “ ”, now though “up” or “down” can set the program running speed ~ (100). The second time press the “setup”, will show “ ”, now through “up” or “down” can set the program strobe speed ~ .
2. Auto RunPress the “MODE”, enter auto run mode menu “ ”, the fixture will auto running 9 built-in programs - the user can set running speed and strobe speed of 9 built-in programs ( - ) in built-in program, the pre-set effect will operate in turn in auto run mode.
3. DMX Control1) Press the “MODE”, enter DMX control mode menu “ ”.2) Press the “UP” or “DOWN”, set DMX address value — .3) Press the “SETUP”, enter DMX working mode menu X-ch.4) Press the “UP” or “DOWN”, set DMX working mode, there are 4 working mode
DMX working mode1:
Nº DMX value FUNCTION
1 0 No use
2 1-22 RED
3 23-45 GREEN
4 46-68 BLUE
5 69-91 CYAN
6 92-114 YELLOW
7 115-137 ORANGE
8 138-160 PINK
9 161-183 PURPLE
10 184-206 DARK BLUE
11 207-229 LIGHT GREEN
12 230-252 WHITE
13 253-255 WARM WHITE
EN
GL
ISH
.
DMX working mode 2:
CHANNEL VALUE FUNCTION
CH1 0-255 RED
CH2 0-255 GREEN
CH3 0-255 BLUE
DMX working mode 3:
CHANNEL VALUE FUNCTION
CH1 0-255 MASTER DIMMER
CH2 0-255 RED
CH3 0-255 GREEN
CH4 0-255 BLUE
PAG. 3
DMX working mode 4: 6 channels
CHANNEL VALUE FUNCTION
CH1 0-255 Master dimming
CH2
RED Dimming 0-255 RED Dimming 0-255
All kinds of different sta-tic selectable
(when CH6 to be 0-25 is effective)
0-8 R(255)
9-17 R(255) G(50)
18-26 R(255) G(150)
27-35 R(255) G(255)
36-44 R(200) G(255)
45-53 R(100) G(255)
54-62 R(40) G(255)
63-71 G(255)
72-80 G(255) B(50)
81-89 G(255) B(150)
90-98 G(255) B(255)
99-107 G(150) B(255)
108-116 G(50) B(255)
117-125 B(255)
126-134 R(50) B(255)
135-143 R(150) B(250)
144-152 R(255) B(255)
153-161 R(220) B(50)
162-170 R(150) G(50) B(100)
171-179 R(50) G(180) B(220)
180-188 R(50) G(220) B(100)
189-197 R(150) G(220)
198-206 R(150) B(220)
207-215 G(180) B(220)
216-224 G(220) B(50)
225-233 R(220) G(100) B(50)
234-242 R(220) G(200) B(100)
243-251 R(255) G(200) B(150)
252-255 R(255) G(255) B(255)
Speed adjust (control the CH6 [26-
255] selected program
speed)
0-255 0-255 SLOW-FAST
CH3 0-255 GREEN DIMMING 0-255
CH4 0-255 BLUE DIMMING 0-255
CH50-9 NO FUNCTION
10-255 STROBE (SLOW-FAST)
CH6
0-25 can select 29 static colors though CH2
26-51 Pr02 (seven color gradient)
52-77 Pr03 (three color gradient)
78-103 Pr04 (seven color hopping)
104-129 Pr05 (three color hopping)
130-155 Pr06 (fantasy 1)
156-181 Pr07 (fantasy 2)
182-207 Pr08 (red gradient)
208-233 Pr09 (green gradient)
234-255 Pr10 (blue gradient)
EN
GL
ISH
.
PAG. 4
EN
GL
ISH
.
PAG. 5
PAG. 6
Modo de operación DMX 1:
Nº DMX value FUNCTION
1 0 No use
2 1-22 RED
3 23-45 GREEN
4 46-68 BLUE
5 69-91 CYAN
6 92-114 YELLOW
7 115-137 ORANGE
8 138-160 PINK
9 161-183 PURPLE
10 184-206 DARK BLUE
11 207-229 LIGHT GREEN
12 230-252 WHITE
13 253-255 WARM WHITE
Modo de operación DMX 4:
CANAL VALOR FUNCION
CH1 0-255 Dimming Principal
CH2
Dimming de Rojo 0-255 Dimming de Rojo 0-255
Seleccione el color es-tático (se encuentra dis-ponible en el valor 0-25
del sexto canal)
0-8 R(255)
9-17 R(255) G(50)
18-26 R(255) G(150)
27-35 R(255) G(255)
36-44 R(200) G(255)
45-53 R(100) G(255)
54-62 R(40) G(255)
63-71 G(255)
72-80 G(255) B(50)
81-89 G(255) B(150)
90-98 G(255) B(255)
99-107 G(150) B(255)
108-116 G(50) B(255)
117-125 B(255)
126-134 R(50) B(255)
135-143 R(150) B(250)
144-152 R(255) B(255)
153-161 R(220) B(50)
162-170 R(150) G(50) B(100)
171-179 R(50) G(180) B(220)
180-188 R(50) G(220) B(100)
189-197 R(150) G(220)
198-206 R(150) B(220)
207-215 G(180) B(220)
216-224 G(220) B(50)
225-233 R(220) G(100) B(50)
234-242 R(220) G(200) B(100)
243-251 R(255) G(200) B(150)
252-255 R(255) G(255) B(255)
Modo de operación DMX 2:
CHANNEL VALUE FUNCTION
CH1 0-255 RED
CH2 0-255 GREEN
CH3 0-255 BLUE
Modo de operación DMX 3:
CHANNEL VALUE FUNCTION
CH1 0-255 MASTER DIMMER
CH2 0-255 RED
CH3 0-255 GREEN
CH4 0-255 BLUE
PAG. 7
CH 2Configuración de velo-cidad: control de la ve-locidad de CH6 (26-255)
0-255 0-255 lento-rápido
CH3 0-255 DIMMING VERDE 0-255
CH4 0-255 DIMMING AZUL 0-255
CH50-9 ND
10-255 STROBE (LENTO-RÁPIDO)
CH6
0-25Puede seleccionar entre 29 tipos de color estático
mediante el segundo canal
26-51 Pr02 (degradado de siete colores)
52-77 Pr03 (degradado de tres colores)
78-103 Pr04 (hopping de siete colores)
104-129 Pr05 (hopping de tres colores)
130-155 Pr06 (Fantasy 1)
156-181 Pr07(Fantasy 2)
182-207 Pr08 (degradado de color rojo)
208-233 Pr09 (degradado de color verde)
234-255 Pr10 (degradado de color azul)
4. Modo SlavePresione la tecla “MODE” para ingresar al menú del modo Slave “ ”.
NOTAS: 1) Tenga en cuenta que, de no presionar tecla alguna durante 20 segundos, la pantalla LED se apagará. Para regresar al modo actual antes del apagado, presione cualquier tecla. Se desbloquearán todas las teclas de la unidad. 2) Este producto ofrece protección térmica. Al utilizarlo durante un tiempo prolongado, según el equipo que utilice, el sistema de refrigeración ajustará automáticamente el consumo de energía, a fin de reducir la tem-peratura de la unidad. Si precisa operar el dispositivo con brillo pleno, procure hacerlo en ambientes con buena ventilación. 3) Al encender la unidad, se mostrará la versión de la unidad “U-I0” durante 2 segundos. Luego, se direc-cionará al usuario al modo de operación definido.