Post on 16-Nov-2014
Wireless Curriculum Development SectionWireless Curriculum Development SectionWireless Curriculum Development SectionWireless Curriculum Development Section
ISSUEISSUE
ORI000004 CCS7 Signaling ORI000004 CCS7 Signaling SystemSystem
ORI000004 CCS7 Signaling ORI000004 CCS7 Signaling SystemSystem
2.02.0
Upon completion of this course, the trainees should be
able toUnderstand the basic concepts in CCS7
Understand the important composition of CCS7 signaling units
Understand the basic signaling procedure of CCS7
Course ObjectivesCourse Objectives
Section 3 Signaling Procedure
Section 2 Signaling Units
Section 1 Basic Concepts in CCS7
Part 1 Signaling
Part 3 Hierarchy of CCS7 Signaling System
Part 2 CCS7 Signaling Network
Course ArrangementCourse Arrangement
All the control signals used within or between communication equipment, whose function are to set up communication;
Signals except bearer information (voice information and non-voice information), which are used to control the action of the exchange.
Definition of signalingDefinition of signaling
1. Subscriber line signaling: between subscriber and the exchange;
2. Interoffice signaling: between exchanges.
subscriber line signaling
interoffice signaling
exchange
exchange
subscriber line signaling
Classification of signaling: According to working location
Classification of signaling: According to working location
a. CAS(Channel associated signaling): CAS is composed of line signal and register signal. For CAS, the signaling channel is combined with the bear information channel (refers to register signal) or the two have fixed correspondence (refers to line signal).
switching equipment
signaling equipment
signaling information carried by speech channel
switching equipment
signaling equipment
Classification of signaling: According to signaling channels
Classification of signaling: According to signaling channels
b. CCS(Common channel signaling): the signaling of a group of voice channels are transmitted on a common high speed data link in the form of time multiplexing.
switching equipment
signaling equipment
signaling equipment
dedicated channel for carrying signaling
speech channel
switching equipment
Classification of signaling: According to signaling channels
Classification of signaling: According to signaling channels
1) CAS: multi - frequency in - band signals, small information volumemutual - control transmission and receiving, slow speed no signaling channel during conversation
2) CCS: packet data signal, large information volumenon - mutual - control mechanism, fast speedindependent data link for signaling, signaling could be transmitted during conversation
wide application area, suitable for future development? require low error - code - ratio? require conduction check of the voice channels
Please press button to continue your study. Please press button to continue your study.
The comparison of CAS and CCSThe comparison of CAS and CCS
Section 3 Signaling Procedure
Section 2 Signaling Units
Section 1 Basic Concepts in CCS7
part 1 Signaling
part 3 Hierarchy of CCS7 Signaling System
part 2 CCS7 Signaling Network
Course ArrangementCourse Arrangement
In CCS7, signaling links are independent of voice channels. These signaling links form a network dedicated to the transmission of signaling, the so called CCS7 signaling network.
It is a multifunctional supporting network, can be used in telephone network, circuit-switch data network, ISDN network, and intelligent network, etc.. Fundamentally, CCS7 signaling network is a packet switching data network used for dedicated purpose.
Definition of CCS7 signaling networkDefinition of CCS7 signaling network
Three supporting networks (in contrast to service networks): CCS7 signaling network; synchronization network; telecommunication management network(TMN).
The existing CCS7 signaling networksInternational network, International reserved network, national network, national reserved network.In CCS7, each message carries a field called NI (network indicator) to indicate which of the four networks this message works in.
Existing CCS7 signaling networksExisting CCS7 signaling networks
A CCS7 signaling network is composed of three elements: Signaling Point (SP), Signaling Transfer Point (STP) and Signaling Link.
SP
STP
SP
Link Link
As shown in the figure on the right, in a CCS7 signaling network, SP is represented by a circle, STP is represented by a square, link is represented by a dashed line, voice path is represented by a solid line.
Three elements in a CCS7 signaling networkThree elements in a CCS7 signaling network
1) SP (Signaling Point)
SP is the originating or destination point of a CCS7 message. In each signaling network, a SP has an exclusive signaling point code: SPC (14 bits). Since the four signaling networks assign the SPCs independently, only NI+SPC can uniquely locate a SP.Notes: In data setting we usually describe SPC in Hex. Following are some examples of SPC shown in binary and hex.
SPC (binary) SPC (Hex)
00 0000 1011 0101 00b5
10 0011 1101 0111 23d7
Three elements in a CCS7 signaling networkThree elements in a CCS7 signaling network
DPC: Destination Point CodeOPC: Originating Point CodeA message going from one SP to another SP should bearing the SPC of the originating SP and the terminating SP, which are called OPC and DPC respectively. If we compare sending a message to sending a letter, OPC and DPC are similar to the sender's address and receiver's address.
OPC and DPC (1)OPC and DPC (1)
2) STP (Signaling Transfer Point)STP is the network node which transfers CCS7 messages.
3) Link Link is the data channel which connects the nodes (SPs and STPs) in CCS7 signaling network.Digital link, 64 kb/s
Three elements in a CCS7 signaling networkThree elements in a CCS7 signaling network
Working mode refers to the relationship between the signaling link and the voice channels the link serves.Presently two modes are in use:
1) Associated modeThe messages between two adjacent points are conveyed over a link-set directly interconnecting those signaling points, i.e., the link is parallel to the voice path.
SPA BSP
Working modes of CCS7 signaling networkWorking modes of CCS7 signaling network
2) Quasi-associated mode
In the quasi-associated mode the message which is going to
arrive at a SP goes through a path which is predetermined and
via one or more STPs.
SPA B
STP
SP
Working modes of CCS7 signaling networkWorking modes of CCS7 signaling network
Remember, the sole purpose of using signaling is to serve the voice path.
SPA
SPB
TandemC
STP
When the links between any two offices are transferred by a STP, how will be the link path?
When the links between any two offices are transferred by a STP, how will be the link path?
Note: the arrows show the paths that signaling messages go through. Remember, a signaling path always starts from one end of the voice path it is going to serve, and ends up at the other end of the voice path.
SPA
SPB
TandemC
STP
When the links between any two offices are transferred by a STP, how will be the link path?
When the links between any two offices are transferred by a STP, how will be the link path?
MSU1OPC=?DPC=?
: voice path: signaling link
SPB
SPA SPC SPA SPC
STPB
MSU2OPC=?DPC=?
MSU1OPC=?DPC=?
MSU2OPC=?DPC=?
Tandem Office
In the following two figures, what's the DPC and OPC of the messages?
(a) (b)
OPC and DPC (II)OPC and DPC (II)
MSU1OPC=ADPC=B
: voice path: signaling link
SPB
SPA SPC SPA SPC
STPB
MSU2OPC=BDPC=C
MSUOPC=ADPC=C
MSUOPC=ADPC=C
Tandem Office
Answer:
(a) (b)
OPC and DPC (II)OPC and DPC (II)
Section 3 Signaling Procedure
Section 2 Signaling Units
Section 1 Basic Concepts in CCS7
part 1 Signaling
part 3 Hierarchy of CCS7 Signaling System
part 2 CCS7 Signaling Network
Course ArrangementCourse Arrangement
The hierarchy of CCS7 system can be functionally divided into two parts, i.e. Message Transfer Part (MTP) and User Part (UP).
1) MTP (Message Transfer Part)The Message Transfer Part (MTP) provides the functions that enable User Part's significant information to be transferred across the signaling network to the required destination. In addition, functions are included in the MTP to overcome network and system failures that would affect the transfer of signaling information.
Hierarchy of CCS7 signaling systemHierarchy of CCS7 signaling system
2) UP (User Part)
The User Part (UP) is the "user" of MTP. It
includes TUP (Telephone User Part), ISUP
(ISDN User Part), etc.
In the following, our explanation will focus
on TUP, which transmits and receives
interoffice control signals to/from the MTP
for telephone calls during call process.
The figure on the right describes the relation
between UP and MTP.
UP
MTP
TUP
Hierarchy of CCS7 signaling systemHierarchy of CCS7 signaling system
MTP could be further divided into 3 levels, namely, level 1-- signaling data link, level 2 -- signaling link, level 3 -- signaling network.These three levels are similar to the first three levels of OSI model.
A signaling data link is a bi-directional transmission path for signaling, comprising two data channels operating together in opposite directions at the same data rate. It constitutes the lowest functional level (level 1) in the Signaling System No. 7 functional hierarchy.
Three levels of MTPThree levels of MTP
1) Level 1: Signaling Data Link
The second level provides such functions as signal
unit delimitation, signal unit alignment, error
detection, error correction, initial alignment, signaling
link error monitoring and flow control. It, working
together with level 1, ensures the reliable
transmission of messages between two adjacent
SPs.
Three levels of MTPThree levels of MTP
2) Level 2: Signaling Link
Functions on this level include signaling message handling and signaling network management. In the transmission of messages, the function of signaling message handling sends the messages to the proper link or user part; while when malfunctions come up, the network management function realizes the reorganization of the signaling network, and when congestion appears, the network management function carries out flow control at the network level, so as to ensure the reliable transmission of signaling under extreme conditions.
Three levels of MTPThree levels of MTP
3) Level 3: Signaling Network
Logicalchannel
Logicalchannel
Logicalchannel
Physicalchannel
Message Discrimination
Message Distribution
Message Routing
User Part
L4
SP A
Signaling NetworkL3
L2 Signaling Link
L1
Signaling Data Link
SP B User Part
Signaling Network
Signaling Link
Signaling Data Link
The 4-level structure of CCS7 systemThe 4-level structure of CCS7 system
AM/CM
OPT
MPU
LPN7
BNET
DT
OPT
MPU
SMSM
LEVEL 4
LEVEL 3
LEVEL 2
LEVEL 1
LINKS
LEVEL 4
The distribution of CCS7 system in STEThe distribution of CCS7 system in STE
Section 3 Signaling Procedure
Section 2 Signaling Units
Section 1 Basic Concepts in CCS7
part 1 Signaling
part 3 Hierarchy of CCS7 Signaling System
part 2 CCS7 Signaling Network
Course ArrangementCourse Arrangement
Signaling unit (SU) is the minimum unit used to carry the various signaling messages in CCS7
signaling system.
Definition of CCS7 signaling unitDefinition of CCS7 signaling unit
1. MSU (Message Signaling Unit) Used to transfer the signaling message from the 4th level or the signaling network management message from the 3rd level.
2. LSSU (Link Status Signaling Unit) Originating and terminating at the 3rd level, it carries no detailed signaling message, used to indicate the link status when the link is put into use or malfunctions, so as to set up or recover the signaling links.
3. FISU (Fill-in Signaling Unit) Originating and terminating at the 2nd level, it is used to fill in the vacant locations when the link is free or congested, so as to keep the link in the status of communication, and sometimes it is also used to confirm the receive of message from the opposite side.
The classification of signaling units--According to the sources
The classification of signaling units--According to the sources
FF CK LI FIB FSN BIB BSN
8 16 2 6 1 7 1 7 8
SIF SIO
8n(n≥2) 8 SendingDirectionStructure of MSU
FF CK SF LI FIB FSN BIB BSN
8 16 8 2 6 1 7 1 7 8 Sending DirectionStructure of LSSU
F CK LI FIB FSN BIB BSN F
8 16 2 6 1 7 1 7 8 Sending DirectionStructure of FISU
The structure of MSU, LSSU and FISUThe structure of MSU, LSSU and FISU
As shown in the above figure, there are multiple circuits (e.g.. one time slot is one circuit) connecting two adjacent SPs. To distinguish them, we should assign each of them a code, CIC. So CIC is unique in each direction, and is coded in 12 bits. Therefore, in each direction we can have as many as 212=4096 circuits, and the value range of CIC is [0~4095].
link
speech channel
switching equipment
signaling equipment
switching equipment
signaling equipment
CIC: Circuit Identification Code (12 bits)SLC: Signaling Link Code (4 bits)
Important fields in TUP MSU-- CIC, SLCImportant fields in TUP MSU-- CIC, SLC
Correspondence of CIC and E1:
For E1, the lowest 5 bits of CIC
represent PCM time slot number,
and the higher 7 bits represent
PCM system number.
7 bits 5 bits CICPCM system number PCM time slot number
CIC E1#1 E1#0 CIC
TS0 0000000 00000TS1 0000000 00001
TS31 0000000 11111
0000001 00000 TS0 0000001 00001 TS1
0000001 11111 TS31
Important fields in TUP MSU-- CIC, SLCImportant fields in TUP MSU-- CIC, SLC
Similarly, if there are multiple links connecting two adjacent SPs, to distinguish them, we should assign each of them a code, SLC. So SLC is unique in each direction, and is coded in 4 bits. Therefore, in each direction we can have as many as 24=16 links, and the value range of SLC is [0~15].
......
... ...
local SP one direction
another direction
Important fields in TUP MSU-- CIC, SLCImportant fields in TUP MSU-- CIC, SLC
CIC=0,CIC=1,
CIC=m1
CIC=0,CIC=1,
CIC=m2
SLC=0,SLC=1,
SLC=n1
SLC=0,SLC=1,
SLC=n2
Different from CAS, in CCS7 we usually use bi-directional trunk circuits. This induces the possibility of selecting the same circuit from the two offices at the same time, which is called "dual seizure". To prevent this, for each circuit, we assign its "master" control right to one office, and the "non-master" or "slave" control right over this circuit to the office at the other end. Usually we assign the master control rights according to the circuit's CIC number : if the CIC number is even then its master control right is given to the office which has larger SPC (Signaling point code), and if the CIC number is odd then its master control right is given to the office which has smaller SPC.Following is an example of CIC and master right distribution.
Dual seizureDual seizure
0 master slave 01 slave master 12 master slave 2
SP ASPC=0002
SP BSPC=0001
2n master slave 2n
2n+1 slave master 2n+1
Dual seizureDual seizure
The principle to avoid dual seizure:When the local office wants to make an outgoing call, it first tries those circuits on which it has master control right; only when all these circuits are busy, will the local SP try the circuits it has slave control right. So when the slave circuits are to be selected, the possibility of "dual seizure" rises again. Hence different "circuit selection modes" are used: for the circuits on which the local office has master control right, "FIFO" mode is adopted, which means the circuit bearing the longest idle period will be selected; while for the circuits on which the local office has slave control right, "LIFO" mode is adopted, which means the circuit bearing the shortest idle period will be selected. In this way, most of the danger of "Dual seizure" can be avoided.
To be continued...
Dual seizureDual seizure
The principle to avoid dual seizure:But still there is an extreme occasion when there is only one idle circuit left for selection from both sides. Then if both sides try to use this circuit at the same time, the possibility of dual seizure rises again. In this case, the principle is the "slave" side should give way to the "master" side.
Please press button to continue your study. Please press button to continue your study.
Dual seizureDual seizure
Section 3 Signaling Procedure
Section 2 Signaling Units
Section 1 Basic Concepts in CCS7
part 1 Signaling
part 3 Hierarchy of CCS7 Signaling System
part 2 CCS7 Signaling Network
Course ArrangementCourse Arrangement
IAM: initial address
message, the part or all of
the called number are sent
in this message
ACM: address complete
message
ANC: answer signal, charge
CLF: clear forward message
RLG: release guard signal
After hearing the busy tone, the called party hooks on.
the called phone rings
the caller listen to the ring back tone
the called partypick up the phone
the caller hooks on first
IAM (6660008)
ACM
ANC
communication
CLF
RLG
SPBSPA
Basic signaling procedureBasic signaling procedure
SAM: Subsequent address message, following IAM, used to send the subsequent digits of the called number which haven't been sent by IAM. SAO: Subsequent address message with one signal. Similar to SAM, but can send only one digit.CBK: Clear backward signal
the called party hooks on first
LE TM LE
...
IAM* (66)
SAM ( or SAO ) (60)
SAO (8)
ACM
ANC
CBKCLF
RLG
IAM** (6660008)
ACM
ring back tone
ANC
conversation CBK
CLFRLG
Call connection through tandem officeCall connection through tandem office
IAI : Initial address message with add- tional information. If the caller number is to be sent initiatively, IAI is used.
...
IAI(66, 8880003)
SAM( or SAO) (60)
SAO (8)
ACM
ANC
CLF
RLG
CLF
RLG
IAM**(6660008)
ACM
ANCring back tone
conversation
Send caller number initiativelySend caller number initiatively
the originating the destinationLE toll office toll office
GRQ: General request message. It is used to ask for caller number and some other information.
GSM: General forward setup information message. It is used to send caller number and some other information.
LE
ACM
ANC
CLF
GRQ
CLF
RLG
IAM(6660008)
GRQ
ANCring back tone
conversation
LETM
GSM(8880003)GSM(8880003)
ACM
IAM(6660008)
The opposite office ask for caller number (e.g.,Malicious call tracing, CLID)
The opposite office ask for caller number (e.g.,Malicious call tracing, CLID)
...
...
CCS7 R2LE TM LEIAM (666) SAO (0)
SAO (8)
ACM
ANC
CBK
CLF
RLG
SEIZE 6 (the 1st digit)
A16 (the 2nd digit)
A18 (the last digit)
A3II-1B6
ring back tone
ANSWER
conversation
CBK
CLF
RLG
The cooperation of CCS7 and R2The cooperation of CCS7 and R2
SummarySummary
This course describes the following important aspects of
CCS7:
Basic concepts of CCS7: signaling, CCS7 signaling network,
CCS7 hierarchy
Signaling Units, in which CIC, SLC, etc. are the most
important concepts.
Signaling procedure