Post on 12-Oct-2020
Sizing datasheet
OPTICUBE FIELD
C008-EN-01-Opticube Field2 3
The Opticube Field is specially designed to simplify the modeling and installation of the heating room used in large collector fields. Indeed, gathering all functional units in one or more turnkey storage containers simplifies project management from quotation to com-missioning.Sunoptimo has therefore created a range of standard solutions in different sizes: from DN80 to DN250. Various options are also available so that the customer can keep a high degree of modularity on the selected Opticube Field.
OPTICUBE FIELD - ThE BaSICS
The Opticube Field concept starts around a 40 foot double door container (one on each side). It is then modified and equipped in the workshop to meet the needs of the cus-tomer. This way, the container is transformed into a real heating room. But before descri-bing the hydraulics of the installation, it is important to review the equipment that is not directly part of the process but that also has all its importance in a boiler room.
C008-EN-01-Opticube Field2 3
Insulation of the containerThe containers are insulated to avoid condensation inside and to help maintain a frost-free environment in winter. That’s why the container is completely insulated. The walls and ceilings are insulated from the inside with 4 cm thick PUR iso sheets and the floor is foamed from underneath.
ConnectionIn order to avoid the presence of pipes exposed to the open air, the connections to the Opticube are made via an opening in the floor of the container. The buried pipes just have to come out and connect directly to the fitting provided. Once the connection is establi-shed, the hole must be insulated and the opening closed to avoid any animal or plant incursion that could harm the equipment.
Temperature managementGiven the insulation in place and the heat sources, there is a risk for the electrical equipment to heat up inside the container. In case of frost, it is also necessary to protect the pipes from freezing. For these purposes, Opticubes Field are equipped with ventilation grills, a fan and an electrical radiator.
Insulation of the piping In order to minimize heat losses, the pipes are insulated with rockwool and protected by PVC shells. The insu-lation in place is class 4 and complies with EN 12828. Finishes on the end caps are made with aluminum shells. The valves and other organs are insulated with tailor-made hulls.
C008-EN-01-Opticube Field4 5
Maintenance assistanceThe Opticube is designed to facilitate the implementation of a project by delivering a turnkey heating room. But the Opticube also aims to fa-cilitate the maintenance of the installation. For this purpose, different elements are put in place. First, the equipment is set in a way that they can all be removed separately without having to dismantle other equip-ment pieces. To move heavy equipment, some hooks are provided on the ceiling so that it can be lifted by means of a hoist and placed on a carriage or truck.
A good marking is established for a quick and straightforward un-derstanding of the hydraulic and electrical system. It makes it easy to locate the different components (probes, mea-suring instruments, etc.), as well as the direction of the pipes and their role, the elements of the elec-trical box and their correspondence as well as the junction boxes.
ElectricityAt the electrical level, all the equipment is connected and the power supplies and measurement signals are brought to a box via cable trays or PVC sheaths. To connect the PLC automat trough that box, just plug it to the terminal blocks. Note that the PLC is not included in the supply.
The different equipment and metal parts must be connec-ted back to the ground. An earth rail is delivered in the
container and must be sinked to the ground and connected to the general earth terminal of the container.
C008-EN-01-Opticube Field4 5
Heat exchangerIn general, the solar circuit is filled with glycolated water and pressurized. To avoid excessive volumes of glycol and to isolate the solar circuit, the use of a heat exchanger is necessary. Standard exchangers are soldered stainless steel plate exchan-gers. For large installations, an exchanger battery is installed to guarantee a maximum of 5°C pinch. On request we can also provide removable plate heat exchanger with seal.
Measuring instrumentsTo regulate the installation and ensure its real-time ope-ration, various measuring devices are installed on the network. For temperature, PT1000 probes are placed in thermowells, pressure is transmitted by means of electronic pressure sensors and flow rate is measured by impulse flow meters. For more convenience inside the container, manometers and thermometers are also installed at key locations.
Filling kitDuring commissioning, the entire solar network must be filled with coolant that is also frost-resistant. The Opticube Field is therefore equipped with a pumping unit that can fill the network from the Overtank. This pumping kit is also used to pump back the fluid into to the network in case it has been previously eva-cuated to the Overtank through the safety valves due to overhea-ting. Kits are provided in DN50 for filling.
Pumping groupsOn both sides of the heat exchanger, liquids must circu-late in order to transfer heat efficiently. Each pumping unit is equipped with a filter, shut-off valves to allow iso-lation of the filters and variable flow pumps to optimize energy production.
C008-EN-01-Opticube Field6 7
Below, the hydraulic diagram shows the basic Opticube Field completed with the various options available. For a better understanding, they have been put in color, and they are des-cribed one by one on next page.
OPTICUBE FIELD - OPTIOnS
V10
bars
P4Q4
Pr.6
°C°C
1514
DNfie
ld
V6
89
P1Q
1DN
200
6.5 bars
Opt
icub
e Fi
eld©
9 bars
Col
lect
orfie
ld
13
F1
12
H1
Pr.2
bars
6.5 bars
bars °C°C
P2
Pr.3
Pr.1
bars
Del
iver
y (s
tora
ge o
r oth
er)
bars
43
16
P3
°C°C
DNfield
DNfield
DNfie
ld
DNfie
ld
DNfie
ld
DNfie
ld
DN25
DN25
10
DNfield
DNfield
7
bars
DN25
bars
bars
Q2D
N20
0
DN
Expa
nsio
n
2 5
°C
DNAFsec
V1V2
Vove
rtank
11
DNfieldV7
V8
V9
DN25
DNOvertank
DNOvertank
Vexp
ansi
on
DNAFsec
DNAFsec
V3V4
V5
V6
V3V4
V5
V6
ww
w.
su
no
pt
imo
.c
om
inf
o@
su
no
pt
imo
.co
m
Att
enti
on: C
eci e
st u
n sc
hém
a de
pri
ncip
e et
non
un
sché
ma
d'ex
écut
ion
!Ce
sch
éma
n' a
pas
la p
réte
ntio
n d'
être
com
plet
et n
e co
ntie
nt p
as to
ut le
s or
gane
sde
séc
urité
et d
e m
aint
enan
ce d
'une
inst
alla
tion
hydr
auliq
ue c
ompl
ète.
Veu
illez
vou
s co
nfor
mer
aux
text
es e
t dire
ctiv
es e
n vi
gueu
r.
Proj
et :
Opt
icub
e Fi
eld
-ga
mm
ev2
Dés
inat
eur:
J-B
MA
LAU
D
C008-EN-01-Opticube Field6 7
In freezing weather, the temperature of the solar liquid may drop below 0°C. Depending on the anti-freeze concentration, the solar liquid has a solidification point below 0°C. The solar Antifreeze option avoids reaching this solidification point. The option works in two phases. Initially, the solar pump (P1) makes the liquid circulate in the network to warm the collector field by fetching heat in the buried network por-tion. This heat comes from the losses that occurred during the last phases of production. Circulating the network also prevents stagnation in the pipes which is more conducive to the formation of ice caps. The liquid returning to the Opticube Field may potentially have a temperature below 0°C. It would therefore be dangerous to pass it through the exchanger, which contains water that solidifies at 0°C. The Antifreeze option therefore allows the bypass of the exchanger during this first phase.
If the cold persists, a heat source must take over. By reversing the direction of the secondary network piping (see Secondary Antifreeze) and switching on the secondary pump (P2), the secondary network provides heat to the exchanger, which can now transfer it to the solar network. The control valves (V1 and V2) make it possible to control the initial temperature of the fluid that goes to the collector field. The pipe size for this option is smaller than the main pipe. Indeed, it is not necessary to circulate the liquid at the maximum flow. If even so, the maximum flow is required, the fluid velocity will be greater in the «antifreeze» part, but this scenario will not occur often.
In brown, on the secondary side (to the left of the exchanger), there is a double bypass with valves that can reverse the flow and thus circulate the circuit the other way around. This ensures that we have a source hot enough to heat the solar fluid in time of persistent gel. This option is complementary to the solar antifreeze option. Regarding piping sizes, same thing applies as for the solar antifreeze option.
The stratification option is in dark green on the hydraulic diagram. This option adds a connection making it possible to stratify the storage volume according to its own temperature and the temperature from the departure of the exchanger.
The delivery option adds a pumping group which will be connected to a district heating network or ano-ther process depending on the application. The goal is to deliver the produced heat to a consumer. Depending on the degree of sunshine, this heat can come directly from the solar network or the storage tank. The Delivery option can be placed in the basic container up to the DN200. Above that, it will be installed in an additional container.
Opticube field size: DN... 80 100 125 150 200 250 300
Antifreeze pipe size: DN... 40 50 60 80 100 125 150
SECOnDary anTIFrEEzE
SOLar anTIFrEEzE
STraTIFICaTIOn
DELIvEry
C008-EN-01-Opticube Field8 9
Various Opticubes Fields are available according to their options and sizes, but one impor-tant point is how to manage expansion. Thus, during the heating of the collector field, the solar liquid expands and the pressure of the system tends to rise and is taken up by expan-sion vessels. When the liquid overheats, it vaporizes which suddenly creates an increase in volume and therefore also in pressure in the closed system. There are then two ways to manage this overpressure.
OPTICUBE FIELD - PhILOSOPhy
«LIqUID» PhILOSOPhy
The expansion volume is only able to manage the expansion of the solar liquid. The passage to steam is taken care of by the safety valve that evacuates the excess pressure to the overtank whose volume must thus be more consequent. To restart the system, it is necessary to have a technician that will pump back the discharged fluid towards the solar network using the filling pump (P3).
«STEam» PhILOSOPhy
The expansion volume allows both the expansion of the liquid and of the passage of steam of the liquid in the whole system (volume of the collector field as well as the hot pipes). The expansion volume must thus be larger and the Overtank may be smaller. When cooling down, the evaporated solar fluid condenses and the pressure drops. The vases push back the liquid into the network. The intervention of a technician is not necessary. This technique requires a preemptive vase before the expansion vessels in order to avoid contact between high temperature liquid and the expansion vessels’ membrane.
In order to optimize the Opticubes’ groundspace, the expansions tanks and Overtank are placed in the Opticube Field if possible. If there is not enough space, the Overtanks are then external tanks while the expansion role is taken over by the Opticube Expansion. The latter is a 20’ or 40’ container which contains expansion vessels and if necessary prevases.
Subsequently, we present the full available range of Opticubes Field. The main features of standard sizing are displayed. The second column shows the maximum allowable values for each size.
C008-EN-01-Opticube Field8 9
OPTICUBE FIELD - FULL rangE
Dn80 (800 to 1.500 m²)
«LIqUID» PhILOSOPhy
Dn100 (1.500 to 3.000 m²)
Dn125 (3.000 to 5.000 m²)
Dn150 (5.000 to 7.250 m²)
Dn200 (7.250 to 13.000 m²)
Dn250 (13.000 to 20.000 m²)
Dn300 (20.000 to 30.000 m²)
C008-EN-01-Opticube Field10 11C008-EN-01-Opticube Field
DN100 Liquid Standard sizing ... Up to
Collector area 1.220 m² 1.500 m²
Solar and secondary flow 26,2 m³/h 32,6 m³/h
Fluid speed 1,45 m/s 1,8 m/s
Exchange power 919 kW 1.140 kW
DTlog heat exchanger 5°K 5°K
Expansion Volume 600 liters 3.000 liters
Overtank Volume 3.000 liters 6.000 liters
Dimensions Base = 40' container Ref. 113001 Base = 40' container Ref. 113002
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
Delivery (storage or other)
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfieldDN
25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25
bars
bars
Q2DN200
DNExpansion
2
5°C
DNAF
sec
V1
V2
Vovertank
11
DNfie
ld
V7V8V9
DN25
DNOvertank
DNOvertank
Vexpansion
DNAFsec
DNAFsec
V3 V4
V5
V6
V3 V4
V5
V6
w w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUD
OPTICUBE FIELD - Dn80
>> FrOm 800 TO 1.500 m²St
anda
rd s
izin
gUp
to...
avaILaBLE OPTIOnS:113027 113028 113029 113030
C008-EN-01-Opticube Field10 11C008-EN-01-Opticube Field
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
Delivery (storage or other)
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfieldDN
25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25
bars
bars
Q2DN200
DNExpansion
2
5°C
DNAF
sec
V1
V2
Vovertank
11
DNfie
ld
V7V8V9
DN25
DNOvertank
DNOvertank
Vexpansion
DNAFsec
DNAFsec
V3 V4
V5
V6
V3 V4
V5
V6
w w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUD
DN100 Liquid Standard sizing ... Up to
Collector area 2.250 m² 2.770 m²
Solar and secondary flow 48,1 m³/h 59,4 m³/h
Fluid speed 1,7 m/s 2,1 m/s
Exchange power 1.683 kW 2.078 kW
DTlog heat exchanger 5°K 5°K
Expansion Volume 1.000 liters 5.000 liters
Overtank Volume 6.000 liters 10.000 liters (external Overtank)
Dimensions Base = 40' container Ref. 113003Base = 40' container
Overtank 10 m³Ref. 113004Ref. 113058
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25 DN25
bars
bars
Q2DN200
DNExpansion
2
5°C
DNAF
sec
V1
V2
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
11
DNfie
ld
V7V8V9
DNAFsec
DNAFsec
V3 V4
V5
V6
Overtank
Overtank
DNOvertank
DNOvertank
Delivery (storage or other)
Vexpansion
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
w w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUD
OPTICUBE FIELD - Dn100
>> FrOm 1.500 TO 3.000 m²
avaILaBLE OPTIOnS:
Stan
dard
siz
ing
Up to
...
113031 113032 113033 113034
C008-EN-01-Opticube Field12 13C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn125
>> FrOm 3.000 TO 5.000 m²
avaILaBLE OPTIOnS:
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25 DN25
bars
bars
Q2DN200
DNExpansion
2
5°C
DNAF
sec
V1
V2
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
11
DNfie
ld
V7V8V9
DNAFsec
DNAFsec
V3 V4
V5
V6
Overtank
Overtank
DNOvertank
DNOvertank
Delivery (storage or other)
Vexpansion
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
w w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUD
DN125 Liquid Standard sizing ... Up to
Collector area 4.125 m² 5.000 m²
Solar and secondary flow 88,4 m³/h 106,0 m³/h
Fluid speed 2 m/s 2,4 m/s
Exchange power 3.093 kW 3.711 kW
DTlog heat exchanger 5°K 5°K
Expansion Volume 2.000 liters 5.000 liters
Overtank Volume 20 m³ (external Overtank) 40 m³ (external Overtank)
DimensionsBase = 40' container
Overtank 20 m³Ref. 113005Ref. 113059
Base = 40' containerOvertank 40 m³
Ref. 113006Ref. 113060
Stan
dard
siz
ing
Up to
...
113035 113036 113037 113038
C008-EN-01-Opticube Field12 13C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn150
>> FrOm 5.000 TO 7.250 m²
avaILaBLE OPTIOnS:
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25 DN25
bars
bars
Q2DN200
DNExpansion
2
5°C
DNAF
sec
V1
V2
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
11
DNfie
ld
V7V8V9
DNAFsec
DNAFsec
V3 V4
V5
V6
Overtank
Overtank
DNOvertank
DNOvertank
Delivery (storage or other)
Vexpansion
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
w w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUD
DN150 Liquid Standard sizing ... Up to
Collector area 5.950 m² 7.125 m²
Solar and secondary flow 127,2 m³/h 152,7 m³/h
Fluid speed 2 m/s 2,4 m/s
Exchange power 4.453 kW 5.344 kW
DTlog heat exchanger 5°K 5°K
Expansion Volume 3.000 liters 5.600 liters (external Opticube Expansion)
Overtank Volume 20 m³ (external Overtank) 40 m³ (external Overtank)
DimensionsBase = 40' container
Overtank 20 m³Ref. 113007Ref. 113059
1 Base = 40' containerExpansion = 20' container
Overtank 40 m³
Ref. 113008Ref. 113065Ref. 113060
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
11
DNfie
ld
V7V8V9
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
Overtank
Overtank
DNOvertank
DNOvertank
Delivery (storage or other)
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
Pr.4
9
Opticube Expansion©
DNExpansion
OpticubeField
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUDw w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Stan
dard
siz
ing
Up to
...
113039 113040 113041 113042
C008-EN-01-Opticube Field14 15C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn200
>> FrOm 7.000 TO 13.000 m²
avaILaBLE OPTIOnS:
DN200 Liquid Standard sizing ... Up to
Collector area 10.556 m² 12.750 m²
Solar and secondary flow (m³/h) 226,2 m³/h 271,4 m³/h
Fluid speed (m/s) 2 m/s 2,4 m/s
Exchange power (kW) 7.916 kW 9.500 kW
DTlog heat exchanger (°C) 5°K 5°K
Expansion Volume (liters) 4.000 litters (external Opticube Expansion) 6.400 liters (external Opticube Expansion)
Overtank Volume (liters) 40 m³ (external Overtank) 65 m³ (external Overtank)
Dimensions
Base = 40' container Delivery = 40’ container
Expansion = 20’ containerOvertank 40 m³
Ref. 113009Ref. 113046Ref. 113063Ref. 113060
Base = 40’ container Delivery = 40’ container
Expansion = 20’ containerOvertank 65 m³
Ref. 113010Ref. 113046Ref. 113066Ref. 113061
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
DNfie
ld
DNfie
ld
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
Overtank
Overtank
DNOvertank
DNOvertank
Delivery
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
Pr.4
9
Opticube Expansion©
DNExpansion
OpticubeField
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
13
F1
12
H1
P1
bars
Pr.2
HeatingUnit
Opticube Delivery©
Pr.1
DNDe
livery
OpticubeField
3456
DNDe
livery
DNDe
livery
°C°C
DNDe
livery
bars
V2
DNDe
livery
V1
DNDelivery
Storage tank
12
DNDe
livery
7
DNDe
livery
DNDe
livery
DNDe
livery
10 7
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUDw w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Stan
dard
siz
ing
Up to
...
113043 113044 113045113047*
*The stratification option is available for the DN200 Opticube Field as 113045. If the client installs an Opticube Delivery in addition, the strati-fication option will be set up in the delivery contai-ner and becomes reference n°113047.
C008-EN-01-Opticube Field14 15C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn250
>> FrOm 13.000 TO 20.000 m²
avaILaBLE OPTIOnS:
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
DNfie
ld
DNfie
ld
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
Overtank
Overtank
DNOvertank
DNOvertank
Delivery
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
Pr.4
9
Opticube Expansion©
DNExpansion
OpticubeField
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
13
F1
12
H1
P1
bars
Pr.2
HeatingUnit
Opticube Delivery©
Pr.1
DNDe
livery
OpticubeField
3456
DNDe
livery
DNDe
livery
°C°C
DNDe
livery
bars
V2
DNDe
livery
V1
DNDelivery
Storage tank
12
DNDe
livery
7
DNDe
livery
DNDe
livery
DNDe
livery
10 7
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUDw w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.DN250 Liquid Standard sizing ... Up to
Collector area 16.500 m² 19.800 m²
Solar and secondary flow 353,5 m³/h 424,1 m³/h
Fluid speed 2 m/s 2,4 m/s
Exchange power 12.370 kW 14.844 kW
DTlog heat exchanger 5°K 5°K
Expansion Volume 8.000 liters(external Opticube Expansion) 11,2 m³ (external Opticube Expansion)
Overtank Volume 65 m³ (external Overtank) 100 m³ (external Overtank)
Dimensions
Base = 40' containerDelivery = 40’ container
Expansion = 20’ containerOvertank 65 m³
Ref. 113011Ref. 113051Ref. 113068Ref. 113061
Base = 40’ containerDelivery = 40’ container
Expansion = 20’ containerOvertank 100 m³
Ref. 113012Ref. 113051Ref. 113072Ref. 113062
Stan
dard
siz
ing
Up to
...
113048 113049 113050113052*
*The stratification option is available for the DN250 Opticube Field as 113050. If the client installs an Opticube Delivery in addition, the strati-fication option will be set up in the delivery contai-ner and becomes reference n°113052.
C008-EN-01-Opticube Field16 17
OPTICUBE FIELD - Dn300
>> FrOm 20.000 TO 30.000 m²
avaILaBLE OPTIOnS:
DN300 Liquid Standard sizing ... Up to
Collector area 23.750 m² 29.700 m²
Solar and secondary flow 508,9 m³/h 636,2 m³/h
Fluid speed 2 m/s 2,4 m/s
Exchange power 17.812 kW 22.266 kW
DTlog heat exchanger 5°K 5°K
Expansion Volume 8.800 liters (external Opticube Expansion) 16m³ (external Opticube Expansion)
Overtank Volume 65 m³ (external Overtank) 100 m³ (external Overtank)
Dimensions
Base = 40' containerDelivery = 40' container
Expansion = 20’ containerOvertank 65 m³
Ref. 113013Ref. 113056Ref. 113069Ref. 113061
Base = 40’ containerDelivery = 40’ container
Expansion = 40’ containerOvertank 110 m³
Ref. 113014Ref. 113056Ref. 113078Ref. 113062
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
DNfie
ld
DNfie
ld
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
Overtank
Overtank
DNOvertank
DNOvertank
Delivery
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
Pr.4
9
Opticube Expansion©
DNExpansion
OpticubeField
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
13
F1
12
H1
P1
bars
Pr.2
HeatingUnit
Opticube Delivery©
Pr.1
DNDe
livery
OpticubeField
3456
DNDe
livery
DNDe
livery
°C°C
DNDe
livery
bars
V2
DNDe
livery
V1
DNDelivery
Storage tank
12
DNDe
livery
7
DNDe
livery
DNDe
livery
DNDe
livery
10 7
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUDw w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Stan
dard
siz
ing
Up to
...
113053 113054 113055113057*
*The stratification option is available for the DN300 Opticube Field as 113055. If the client installs an Opticube Delivery in addition, the strati-fication option will be set up in the delivery contai-ner and becomes reference n°113057.
C008-EN-01-Opticube Field16 17
OPTICUBE FIELD - FULL rangE
Dn80 (800 to 1.500 m²)
«STEam» PhILOSOPhy
Dn100 (1.500 to 3.000 m²)
Dn125 (3.000 to 5.000 m²)
Dn150 (5.000 to 7.250 m²)
Dn200 (7.250 to 13.000 m²)
Dn250 (13.000 to 20.000 m²)
C008-EN-01-Opticube Field18 19C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn80
>> FrOm 800 TO 1.500 m²
avaILaBLE OPTIOnS:
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
Delivery (storage or other)
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
Vovertank
11
DNfie
ld
V7V8V9
DN25
DNAFsec
DNAFsec
V3 V4
V5
V6
V3 V4
V5
V6
DNOvertank
DNOvertank
Vexpansion
DN
Expa
nsio
n
Auxi
liary
ves
sel
w w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUD
DN80 Steam Standard sizing ... Up to
Collector area 1.220 m² 1.500 m²
Solar and secondary flow 26,2 m³/h 32,6 m³/h
Fluid speed 1,45 m/s 1,8 m/s
Exchange power 919 kW 1.140 kW
DTlog heat exchanger 5°K 5°K
Auxiliary vessel volume 1.000 liters 1.500 liters
Expansion Volume 2.000 liters 5.000 liters
Overtank Volume 1.500 liters 3.000 liters
Dimensions Base = 40' container Ref. 113015 Base = 40' container Ref. 113016
Stan
dard
siz
ing
Up to
...
113027 113028 113029 113030
C008-EN-01-Opticube Field18 19C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn100
>> FrOm 1.500 TO 3.000 m²
avaILaBLE OPTIOnS:
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
Delivery (storage or other)
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfieldDN
25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
Vovertank
11
DNfie
ld
V7V8V9
DN25
DNAFsec
DNAFsec
V3 V4
V5
V6
V3 V4
V5
V6
DNOvertank
DNOvertank
VexpansionD
NEx
pans
ion
Auxi
liary
ves
sel
w w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUD
DN100 Steam Standard sizing ... Up to
Collector area 2.250 m² 2.770 m²
Solar and secondary flow 48,1 m³/h 59,4 m³/h
Fluid speed 1,7 m/s 2,1 m/s
Exchange power 1.683 kW 2.078 kW
DTlog heat exchanger 5°K 5°K
Auxiliary vessel volume 2.000 liters 3.000 liters (external Opticube Expansion)
Expansion Volume 4.000 liters 8.000 liters (external Opticube Expansion)
Overtank Volume 2.000 liters 6.000 liters
Dimensions Base = 40' container Ref. 113017Base = 40' container
Expansion = 20' containerRef. 113018Ref. 113090
Stan
dard
siz
ing
113031 113032 113033 113034
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
Vovertank
11
DNfie
ld
V7V8V9
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
DNOvertank
DNOvertank
Delivery (storage or other)
DNexpansion
xxxl
Pr.4
9
Opticube Expansion Aux. Vessel©
DNexpansion
OpticubeField
Auxi
liary
ves
sel
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
w w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUD
Up to
...
C008-EN-01-Opticube Field20 21C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn125
>> FrOm 3.000 TO 5.000 m²
avaILaBLE OPTIOnS:
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
Vovertank
11
DNfie
ld
V7V8V9
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
DNOvertank
DNOvertank
Delivery (storage or other)
DNexpansion
xxxl
Pr.4
9
Opticube Expansion Aux. Vessel©
DNexpansion
OpticubeField
Auxi
liary
ves
sel
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
w w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUD
DN125 Steam Standard sizing ... Up to
Collector area 4.125 m² 5.000 m²
Solar and secondary flow 88,4 m³/h 106,0 m³/h
Fluid speed 2 m/s 2,4 m/s
Exchange power 3.093 kW 3.711 kW
DTlog heat exchanger 5°K 5°K
Auxiliary vessel volume 3.000 liters (external Opticube Expansion) 6.000 liters (external Opticube Expansion)
Expansion Volume 7.200 liters (external Opticube Expansion) 16 m³ (external Opticube Expansion)
Overtank Volume 6.000 liters 10 m³ (external Overtank)
DimensionsBase = 40' container
Expansion = 20' containerRef. 113019Ref. 113089
Base = 40' containerExpansion = 40' container
Overtank 10 m³
Ref. 113020Ref. 113092Ref. 113058
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
11
DNfie
ld
V7V8V9
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
Overtank
Overtank
DNOvertank
DNOvertank
Delivery (storage or other)
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
DNexpansion
xxxl
Pr.4
9
Opticube Expansion Aux. Vessel©
DNexpansion
OpticubeField
Auxi
liary
ves
sel
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUDw w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
Stan
dard
siz
ing
Up to
...
113035 113036 113037 113038
C008-EN-01-Opticube Field20 21C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn150
>> FrOm 5.000 TO 7.250 m²
avaILaBLE OPTIOnS:
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars
°C°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
10
DNfie
ld
DNfie
ld7
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
V10
bars
P4
Q4
Pr.6
°C °C1514
DNfield
V6
11
DNfie
ld
V7V8V9
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
Overtank
Overtank
DNOvertank
DNOvertank
Delivery (storage or other)
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
DNexpansion
xxxl
Pr.4
9
Opticube Expansion Aux. Vessel©
DNexpansion
OpticubeField
Auxi
liary
ves
sel
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUDw w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
DN150 Steam Standard sizing ... Up to
Collector area 5.950 m² 7.125 m²
Solar and secondary flow 127,2 m³/h 152,7 m³/h
Fluid speed 2 m/s 2,4 m/s
Exchange power 4.453 kW 5.344 kW
DTlog heat exchanger 5°K 5°K
Auxiliary vessel volume 4.000 liters (external Opticube Expansion) 9.000 liters (external Opticube Expansion)
Expansion Volume 10,4 m³ (external Opticube Expansion) 16 m³ (external Opticube Expansion)
Overtank Volume 10 m³ (external Overtank) 20 m³ (external Overtank)
DimensionsBase = 40' container
Expansion = 40' containerOvertank 10 m³
Ref. 113021Ref. 113091Ref. 113058
Base = 40' containerExpansion = 40' container
Overtank 20 m³
Ref. 113022Ref. 113094Ref. 113059
Stan
dard
siz
ing
Up to
...
113039 113040 113041 113042
C008-EN-01-Opticube Field22 23C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn200
>> FrOm 7.000 TO 13.000 m²
avaILaBLE OPTIOnS:
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars°C
°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
DNfie
ld
DNfie
ld
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
Overtank
Overtank
DNOvertank
DNOvertank
Delivery
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
13
F1
12
H1
P1
bars
Pr.2
HeatingUnit
Opticube Delivery©
Pr.1
DNDe
livery
OpticubeField
3456
DNDe
livery
DNDe
livery
°C°C
DNDe
livery
bars
V2
DNDe
livery
V1
DNDelivery
Storage tank
12
DNDe
livery
7
DNDe
livery
DNDe
livery
DNDe
livery
10 7
DNexpansion
xxxlPr
.4
9
Opticube Expansion Aux. Vessel©
DNexpansion
OpticubeField
Auxi
liary
ves
sel
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUDw w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
DN200 Steam Standard sizing ... Up to
Collector area 10.556 m² 12.750 m²
Solar and secondary flow 226,2 m³/h 271,4 m³/h
Fluid speed 2 m/s 2,4 m/s
Exchange power 7.916 kW 9.500 kW
DTlog heat exchanger 5°K 5°K
Auxiliary vessel volume 6.000 liters (external Opticube Expansion) 9.000 liters (external Opticube Expansion)
Expansion Volume 18 m³ (external Opticube Expansion) 36 m³ (external Opticube Expansion)
Overtank Volume 40 m³ (external Overtank) 65 m³ (external Overtank)
Dimensions
Base = 40' containerDelivery = 40' container
Expansion = 40' containerOvertank 40 m³
Ref. 113023Ref. 113046Ref. 113093Ref. 113060
Base = 40' containerExpansion = 40' container
Delivery = 40' containerExpansion 24 m³ = 40’ container
Overtank 65 m³
Ref. 113024Ref. 113095Ref. 113046Ref. 113098Ref. 113061
Stan
dard
siz
ing
Up to
...
113043 113044 113045113047*
*The stratification option is available for the DN200 Opticube Field as 113045. If the client installs an Opticube Delivery in addition, the strati-fication option will be set up in the delivery contai-ner and becomes reference n°113047.
C008-EN-01-Opticube Field22 23C008-EN-01-Opticube Field
OPTICUBE FIELD - Dn250
>> FrOm 13.000 TO 20.000 m²
avaILaBLE OPTIOnS:
8
9
P1 Q1DN200
6.5
bars
Opticube Field©
9 ba
rs
Collectorfield
13
F1
12
H1
Pr.2
bars
6.5
bars
bars°C
°C
P2
Pr.3
Pr.1
bars
bars
4
3
16P3
°C°C
DNfie
ld
DNfie
ld
DNfield
DNfield
DNfield
DNfield
DN25
DN25
DNfie
ld
DNfie
ld
bars
DN25 DN25
bars
bars
Q2DN200
2
5°C
DNAF
sec
V1
V2
DNAFsec
DNAFsec
V3 V4
V5
V6
OpticubeExpansion
Overtank
Overtank
DNOvertank
DNOvertank
Delivery
Vovertank
LI
DNovertank
DNfilling
DN30
0 3.3
13
F1
12
H1
P1
bars
Pr.2
HeatingUnit
Opticube Delivery©
Pr.1
DNDe
livery
OpticubeField
3456
DNDe
livery
DNDe
livery
°C°C
DNDe
livery
bars
V2
DNDe
livery
V1
DNDelivery
Storage tank
12
DNDe
livery
7
DNDe
livery
DNDe
livery
DNDe
livery
10 7
DNexpansion
xxxlPr
.4
9
Opticube Expansion Aux. Vessel©
DNexpansion
OpticubeField
Auxi
liary
ves
sel
800 l 800 l 800 l 800 l 800 l
Vexpansion
13
F1
12
H1
Projet : Opticube Field -gammev2
Désinateur: J-B MALAUDw w w . s u n o p t i m o . c o mi n f o @ s u n o p t i m o . c o m
Attention: Ceci est un schéma de principe et non un schéma d'exécution !Ce schéma n' a pas la prétention d'être complet et ne contient pas tout les organes
de sécurité et de maintenance d'une installation hydraulique complète.Veuillez vous conformer aux textes et directives en vigueur.
DN250 Steam Standard sizing ... Up to
Collector area 16.500 m² 19.800 m²
Solar and secondary flow 353,5 m³/h 424,1 m³/h
Fluid speed 2 m/s 2,4 m/s
Exchange power 12.370 kW 14.844 kW
DTlog heat exchanger 5°K 5°K
Auxiliary vessel volume 10 m³ (external Opticube Expansion) 12 m³ (external Opticube Expansion)
Expansion Volume 28 m³ (external Opticube Expansion) 56 m³ (external Opticube Expansion)
Overtank Volume 65 m³ (external Overtank) 100 m³ (external Overtank)
Dimensions
Base = 40’ containerDelivery = 40’ container
Expansion = 40’ containerOvertank 65 m³
Ref. 113025Ref. 113051Ref. 113096Ref. 113061
Base = 40’ containerExpansion = 40’ container
Delivery = 40’ container2 x Expansion 24 m³ = 40’ container
Overtank 100 m³
Ref. 113026Ref. 113097Ref. 113051Ref. 113098Ref. 113062
Stan
dard
siz
ing
Up to
...
113048 113049 113050113052*
*The stratification option is available for the DN250 Opticube Field as 113050. If the client installs an Opticube Delivery in addition, the strati-fication option will be set up in the delivery contai-ner and becomes reference n°113052.
We would like you to challenge us! Send your project to project@sunoptimo.com and see what we can do for you !
COnTaCT US
Sunoptimo SAChaussée de Marche 940 E5100 Naninne - Belgium
+32 (0) 81 58 81 58info@sunoptimo.comwww.sunoptimo.com