Post on 11-Jun-2020
October’s 2010 - 50 Backlink Packet
First I would like to thank you for subscribing to Paul’s Quality Backlinks; I assure you that you will really
enjoy this service and the quality of the backlinks I provide. Also, before you start link building, there’s
some important information you should know regarding backlinks.
You may have heard from people that do not have complete knowledge about Search Engine algorithms,
say that leaving your link on an “inner page” that has a low or 0 Page Rank inside of a high Page Rank
domain will do your link no good. This is completely false.
I have several websites ranking very high on the first page of Google (five of which, are number one) out
of hundreds of thousands of competing sites. The demo site (http://howtomakeadiapercakehq.com) that I
use for these links, is sitting on the first page of Google, on the 1st
spot out of over 338,000 sites for the
keyword “how to make a diaper cake”, this site also carries a Page Rank of 4. I have done all this by using
this same method of linking in inner pages of high PR authority sites. These links are simply amazing, and
they will do wonders for your keywords & sites. Imagine if you only have to complete with 250,000 or less
competing sites, you will be able to dominate your competition!
Matt Cutts, the head of Google’s webspam team was asked about above statement, but he couldn’t give a
straight answer due to the question being too close to Google’s algorithm. You will find part of the
interview below.
“Stephan Spencer: OK. So, I guess, a follow on to that would be: a .edu and .gov link, and so forth,
has, typically, a more pristine link neighborhood, so it is not just about the PageRank, right? The link
neighborhood comes into play.
Matt Cutts: That is a little bit of a "secret sauce" question, so I am not going to go into how much we
do trust that sort of stuff.
Stephan Spencer: OK. I am going to slap my wrist now. Ouch, ouch!
Matt Cutts: [laughing]”
For the entire interview: http://www.stephanspencer.com/search-engines/matt-cutts-interview
Note: If you’re not already subscribed to Angela V. Edwards monthly backlink packets, I highly urge you to
do so now. Angela is a long time member of the Warrior Forum, and she has a program that provides you
with 30 new High Page Rank (PR.4 – PR. 9) backlinks at the cost of only $5 per month, with your first
packet being free. We are not in any way competing with each other, but rather working as a team to
provide you with the largest amount of the highest quality backlinks you can obtain every month. With
both of our programs combined, you will get the maximum search engine results that you can get without
spending hundreds or even thousands of dollars a month.
Click here for Angela’s program: http://www.easybacklinkbuilder.com/
http://www.theyoungturks.com/ - Page Rank 4
First you will want to create an account
Registration Link: http://www.theyoungturks.com/newuser
After you have created an account, click on “My Preferences” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://wolvix.org/ - Page Rank 5
First you will need to click on the tab that says “Forums”
Now you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on the link that says “Forum Profile Information”
To create your anchor text, use your BBC code in the “Signature” section. You can also
put your URL in the section that says “Website URL” and place your keyword in the “Website
title” box. Your title will become your anchor text keyword
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on the links that says “summary”
Here’s the public view of your anchor text links
http://www.magicbullets.com/ - Page Rank 4
First you will need to click on the tab that says “Forums”
Now you will need to register a new account.
After you have registered, click on “User CP” link
Next, click on “Edit Signature”
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text links, just click on your username
Here’s the public view of your anchor text links
http://www.cplusplus.com/ - Page Rank 7
First you will want to register
Registration link: http://www.cplusplus.com/member/signup.form
Once you have registered, click on “user cp” link
Next, click on “Edit your public profile” link
Now put your Website URL on the “Website” section
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.flyfishing-and-flytying.co.uk/ - Page Rank 4
First you will need to click on the tab that says “Forums”
Now, you will need to register a new account
Once you have registered, click on “Edit my profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “Forum Home”
Then click on your username in the “Active Members” section
Here’s the public view of your anchor text links
http://www.nashvillenews.org – page Rank 4
First you will want to register
Registration Link: http://www.nashvillenews.org/index.php/member/register
After you have registered, you will need to go to
http://www.nashvillenews.org/index.php/member/login
Next, you have to go to http://www.nashvillenews.org/index.php/member/profile and click on
“Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://canadianmeatgoat.com – Page Rank 4
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
Next, click on “Control Panel” link
Then click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your “Your Public Profile” link
Here’s the public view of your anchor text links
http://home.inklingmarkets.com/ - Page Rank 5
First you will want to register
Registration link: http://home.inklingmarkets.com/user/self_invite
Once you have registered, click on your username, you will see a drop down menu, click on “Edit
your profile” link
To create your anchor text, use your HTML code in the “Anything else you'd like everyone to
know?” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
Once you saved your changes, you will be taken to the public view of your anchor text links
http://flixel.org/ - Page Rank 5
First you will need to click on the tab that says “Forums”
Now, you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on the link that says “Forum Profile Information”
To create your anchor text, use your BBC code in the “Signature” section. You can also put your
URL in the section that says “Website URL” and place your keyword in the “Website title” box.
Your title will become your anchor text keyword
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on the links that says “summary”
Here’s the public view of your anchor text links
http://www.androsasoft.net/ - Page Rank 4
First you will need to click on the tab that says “Support Forum”
Now you will need to register a new account.
Once you have registered, click on “Profile” link
Next, click on the link that says “Forum Profile Information”
To create your anchor text, use your BBC code in the “Signature” section. You can also
put your URL in the section that says “Website URL” and place your keyword in the “Website
title” box. Your title will become your anchor text keyword
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on the links that says “summary”
Here’s the public view of your anchor text links
http://www.wannasurf.com/ - Page Rank 6
First you will want to register
Registration Link:
http://www.wannasurf.com/community/index.php?option=com_comprofiler&task=registers
Once you have registered, put your mouse over the “Community” tab, you will see a drop down
menu, click on “Edit”
Next, click on “About Me” tab. You are given a WYSIWYG editor to create your anchor text links
To see the public view of your anchor text, put your mouse over the “Community” tab, you will
see a drop down menu, click on “View”
Here’s the public view of your anchor text links
http://saxontheweb.net/ - Page Rank 5
First you will need to click on the tab that says “SOTW Forum”
Now you will need to register a new account
Once you have registered, click on “Settings” link
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text links, just click on your username
Here’s the public view of your anchor text links
http://www.open-blog.info/ - Page Rank 4
First you will need to click that says “Forum”
Now you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on “Signature” link
To create your anchor text, use your BBC code in the “Signature” section.
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.wesabe.com/groups - Page Rank 7
First you will need to click that says “Sign in”
Now you will need to sign up for a new account
Next, click on your username
Then put your Website URL on the “Your Website” section
To see your public anchor text, put your mouse over the “View my Profile” tab, you will see a
drop down menu, click on “View My Profile”
Here’s the public view of your anchor text links
http://redesenred.net/ - Page Rank 4
First you will want to register
Registration link: http://redesenred.net/pg/register/
Once you have registered, click on your profile icon
Next, click on “Edit profile” link
You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And
make sure it is “Public”
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.gamertagradio.com/cmps_index.php - Page Rank 5
First you will need to click that says “Forums”
Now you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links
To see the public view of your anchor text, click on your username.
Here’s the public view of your anchor text links
http://www.evantaubenfeld.com/ - Page Rank 5
First you will need to click that says “forum”
Now you will need to register a new account
Once you have registered, click on “Settings” link
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.givengain.com/cgi-bin/giga.cgi? – Page Rank 6
First you will want to sign up
Registration Link: https://www.givengain.com/cgi-bin/giga.cgi?cmd=join
After you have signed up, click on “Settings” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “My Profile”
Here’s the public view of your anchor text links
http://elgg.to-gather.org/ - Page Rank 4
First you will want to register
Registration link: http://elgg.to-gather.org/pg/register/
Once you have registered, click on your profile icon
Next, click on “Edit profile” link
You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And
make sure it is “Public”
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.geograph.org.uk/ - Page Rank 5
First you will want to register
Registration link: http://www.geograph.org.uk/register.php
Once you have registered, click on “view your profile” link
Next, click on “Edit your profile” link
Now, put your Website URL on the “Your website” section
To see the public view of your anchor text links, just click on profile
Here’s the public view of your anchor text links
http://www.qohf.org/ - Page Rank 4
First put your mouse over the “Home” tab you will see a drop down menu, click on the tab that
says “Online Forums”
Now, you will need to register a new account
After you have registered, you will need to click “Profile” link
Next, click on the link that says “Forum Profile Information”
To create your anchor text, use your BBC code in the “Signature” section. You can also put your
URL in the section that says “Website URL” and place your keyword in the “Website title” box.
Your title will become your anchor text keyword
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on the links that says “summary”
Here’s the public view of your anchor text links
http://www.infoprix.ca/ - Page Rank 4
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
After you have registered, you will need to click “Profile” link
Next, click on “Personality”
To create your anchor text, use your BBC code in the “Signature” section
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on “Profile” link again
Here’s the public view of your anchor text links
http://www.typeamom.net – Page Rank 5
First you will want to register
Registration Link:
http://www.typeamom.net/index.php?option=com_comprofiler&task=registers&Itemid=10005
7
After you have registered, put your mouse over the “Mom Network” tab, you will see a drop
down menu, click on “Edit My Profile
Next, click on “Edit” link
Now put your mouse over the “Edit” tab, you will see a drop down menu, click on “Update Your
Profile”
Next, click on the “About Me” page
You are given a WYSIWYG editor to create your anchor text links in the “About Me” section
Once you saved your changes, you will be taken to the public view of your anchor text links
http://gfmd.info/ - Page Rank 6
First you will want to register
Registration link: http://gfmd.info/index.php/member/register
After you have registered, you will need to go to http://gfmd.info/index.php/member/login
Next, you have to go to http://gfmd.info/index.php/member/profile and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.deafcando.org.au – page Rank 4
First you will want to register
Registration Link: http://www.deafcando.org.au/index.php?/member/register
After you have registered, you will need to go to
http://www.deafcando.org.au/index.php?/member/login
Next, you have to go to http://www.deafcando.org.au/index.php?/member/profile
and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.heartkidsnsw.org.au – Page Rank 4
First you will want to register
Registration Link: http://www.heartkidsnsw.org.au/index.php/member/register
After you have registered, you will need to go to
http://www.heartkidsnsw.org.au/index.php/member/login
Next, you have to go to http://www.heartkidsnsw.org.au/index.php/member/profile and click
on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.bigartmob.com/ - Page Rank 5
First you will want to create a new account
Create a new account Link: http://www.bigartmob.com/profile/create/
After you have registered, click on “Edit Profile”
To create your anchor text, use your HTML code in the “Interest” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://communities.etech.ohio.gov/ - Page Rank 5
First you will want to register
Registration link: http://communities.etech.ohio.gov/account/register.php
Once you have registered, click on your “Profile” link
Next, click on “Edit profile” link
You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And
make sure it is “Public”
Once you saved your changes, you will be taken to the public view of your anchor text links
http://sa-chinese.org/ - Page Rank 4
First you will need to click on the tab that says “Member Forum”
Now, you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on the link that says “Forum Profile Information”
To create your anchor text, use your BBC code in the “Signature” section. You can also
Put your URL in the section that says “Website URL” and place your keyword in the “Website
title” box. Your title will become your anchor text keyword
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on the links that says “summary”
Here’s the public view of your anchor text links
http://www.voxopop.com/ - Page Rank 6
First you will want to sign up
Sign up link: http://www.voxopop.com/signup
After you have signed up, click on your username
Next, click on “Edit your profile” link
Now put your Website URL on the “Website/blog address” section
To see the public view of your anchor text, click on the links that says “Return to personal page”
Here’s the public view of your anchor text links
http://www.cargurus.com/ - Page Rank 5
First you will want to register
Once you have registered, click on “My Settings” link
Next, click on “Edit” link
To create your anchor text, use your HTML code in the “About” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
Once you saved your changes, you will be taken to the public view of your anchor text links
http://tasselfoot.com/ - Page Rank 4
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
Once you have registered, click on “Settings” link
Next, click on “Edit Signature” link
WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text links, just click on your username
Here’s the public view of your anchor text links
http://pkbc.ca/ - Page Rank 4
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
After you have registered, you will need to click “Profile” link
Next, click on “Signature” link
To create your anchor text, use your BBC code in the “Signature” section
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on your profile
Here’s the public view of your anchor text links
http://www.popscreen.com/ - Page Rank 5
First you will want to sign up
Sign up Link: http://www.popscreen.com/join
Once you have signed up, put your mouse over your username, you will see a drop down menu,
click on “Settings”
Then put your Website URL on the “Web Site or Blog” section
To see the public view of your anchor text, put your mouse over your username, you will see a
drop down menu, click on “Profile”
Here’s the public view of your anchor text links
http://www.garisocial.com/
First you will want to register
Registration link: http://www.garisocial.com/account/register.php
Once you have registered, click on your profile icon
Next, click on “Edit profile” link
You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And
make sure it is “Public”
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.mexicoforestal.gob.mx – Page Rank 5
First you will want to register
Registration link: http://www.mexicoforestal.gob.mx/index.php/member/register
After you have registered, you will need to go to
http://www.mexicoforestal.gob.mx/index.php/member/login
Next, you have to go to http://www.mexicoforestal.gob.mx/index.php/member/profile and
click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.ryarc.com/ - Page Rank 4
First you will need to click on the tab that says “Visit the forums”
Now, you will need to register a new account
After you have registered, you will need to click “Profile” link
Next, click on “Signature” link
To create your anchor text, use your BBC code in the “Signature” section
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on your profile link again
Here’s the public view of your anchor text links
http://www.ottolejeune.com/ - Page Rank 5
First you will want to register
Registration Link: http://www.ottolejeune.com/index.php/member/register
After you have registered, you will need to go to
http://www.ottolejeune.com/index.php/member/login
Next, you have to go to http://www.ottolejeune.com/index.php/member/profile and click on
“Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://hapas.us/ - Page Rank 4
First you will want to register
Registration link: http://hapas.us/account/register.php
Once you have registered, click on your profile icon
Next, click on “Edit profile” link
You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And
make sure it is “Public”
Once you saved your changes, you will be taken to the public view of your anchor text links
http://forum.blu-ray.com/ - Page Rank 5
First you will want to register
Registration link: http://forum.blu-ray.com/register.php
Once you have registered, click on “Profile” link
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text links, just click on your username
Here’s the public view of your anchor text links
http://forum.liberaljudaism.org/ - Page Rank 4
First you will need to click that says “Login to the forum”
Now, you will need to register a new account
After you have registered, you will need to click “Profile” link
Next, click on the link that says “Forum Profile Information”
To create your anchor text, put your URL in the section that says “Website URL” and place your
keyword in the “Website title” box. Your title will become your anchor text keyword
To see the public view of your anchor text, click on the links that says “summary”
Here’s the public view of your anchor text links
http://www.ironguides.net/ - Page Rank 4
First you will need to click that says “Login to the forum”
Now, you will need to register a new account
After you have registered, you will need to click “Profile” link
Next, click on “Personality”
To create your anchor text, use your BBC code in the “Signature” section
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on “Profile” link again
Here’s the public view of your anchor text links
http://zooppa.com/ - Page Rank 5
First you will want to register
Registration link: http://zooppa.com/signup
Once you have registered, click on your username
Next, click on “Edit profile”
Then click on “Extra” tab
To create your anchor text, use your HTML code in the “About Me” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Then click on “More” link
Here’s the public view of your anchor text links
http://www.ridebuzz.org/ - Page Rank 5
First you will want to register
Registration link: http://www.ridebuzz.org/user/register
After you have registered, click on “My Profile” link
Next, click on “Edit” tab
Then go to “prefs” tab
To create your anchor text, use your HTML code in the “A little bit about yourself” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “View” tab
Here’s the public view of your anchor text links
http://seanalan.com – Page Rank 4
First you will want to register
Registration link: http://seanalan.com/index.php?/member/register
After you have registered, you will need to go to
http://seanalan.com/index.php?/member/login
Next, you have to go to http://seanalan.com/index.php?/member/profile and click on “Edit
Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.healthcareersinalaska.info/ - Page Rank 4
First you will want to register
Registration link: http://www.healthcareersinalaska.info/index.php/member/register
After you have registered, you will need to go to
http://www.healthcareersinalaska.info/index.php/member/login
Next, you have to go to http://www.healthcareersinalaska.info/index.php/member/profile
and click on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://www.prettymay.net/ - Page Rank 4
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on the link that says “Forum Profile Information
To create your anchor text, use your BBC code in the “Signature” section. You can also
put your URL in the section that says “Website URL” and place your keyword in the “Website
title” box. Your title will become your anchor text keyword
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on the links that says “summary”
Here’s the public view of your anchor text links
http://www.jockeyjournal.com/ - Page Rank 4
First you will need to click on the tab that says “The Board”
Now, you will need to register a new account
After you have registered, you will need to click “Profile” link
Next, click on “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text, c lick on your username
Here’s the public view of your anchor text links
http://mahtweets.com/ - Page Rank 4
First you will need to click on the tab that says “Forums”
Now, you will need to register a new account
Once you have registered, click on “Profile” link
Next, click on “Signature” link
To create your anchor text, use your BBC code in the “Signature” section
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
http://redux.com/ - Page Rank 6
First you will want to join
Registration link: http://redux.com/signup/splash?ab=1
Once you have joined, click on your username, you will see a drop down menu, click on “view
profile” link
Next, go to “Websites” section and click on “edit” link
Then put your Website URL on the “Websites” section
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.earthinpictures.com/ - Page Rank 4
First you will need to click on the link that says “Earth in Pictures Community”
Now, you will need to register a new account
Once you have registered, click on your profile icon
Next, click on “Edit profile” link
To create your anchor text, use your HTML code in the “About me” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.fooddudes.co.uk - Page Rank 5
First you will need to click on the tab that says “Forums”
Now, you will need to register a new account
Once you have registered, click on “Your Control Panel” link
Next, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “Your Public Profile”
Here’s the public view of your anchor text links
http://www.shutterasia.com/ - Page Rank 4
First you will want to register
Registration link: http://www.shutterasia.com/forum/register.php
Once you have registered, click on “Quick Links” tab, you will see a drop down menu, click on
“Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links in the “Signature” section
To see the public view of your anchor text links, just click on your username
Here’s the public view of your anchor text links
http://www.supereco.com/ - Page Rank 5
First you will want to join
Registration Link: http://www.supereco.com/join/
Once you have joined, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your “Profile URL”
Here’s the public view of your anchor text links
http://www.fusefly.com/ - Page Rank 4
First you will want to register
Registration link: http://www.fusefly.com/pg/register/
Once you have registered, click on your profile icon
Next, click on “Edit profile” link
You are given a WYSIWYG editor to create your anchor text links in the “About Me” section. And
make sure it is “Public”
Once you saved your changes, you will be taken to the public view of your anchor text links
http://www.narniafans.com/ - Page Rank 5
First you will need to click on the tab that says “Forums”
Now, you will need to register a new account
Next, click on your username
You are given a WYSIWYG editor to create your anchor text links in the “Visitor Messages”
section
Once you saved your changes, you will be taken to the public view of your anchor text links
http://zendrum.com/ - Page Rank 4
First you will need to click on the tab that says “Discussion Forums”
Now you will need to register a new account.
Once you have registered, click on “My Profile” link
Next, click on the link that says “Forum Profile Information”
To create your anchor text, use your BBC code in the “Signature” section. You can also
put your URL in the section that says “Website URL” and place your keyword in the “Website
title” box. Your title will become your anchor text keyword
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on the links that says “summary”
Here’s the public view of your anchor text links
http://www.lovinghugs.com/- Page Rank 4
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
After you have registered, you will need to click “Profile” link
Next, click on “Personality”
To create your anchor text, use your BBC code in the “Signature” section
BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]
To see the public view of your anchor text, click on “Profile” link again
Here’s the public view of your anchor text links
http://www.bablingua.com/ - Page Rank 4
First you will need to click on the tab that says “Forum”
Now, you will need to register a new account
Once you have registered, click on “Control Panel” link
Next, click on “Edit Profile” link
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on “Profile” link
Here’s the public view of your anchor text links
http://www.equitycoalition.org – Page Rank 4
First you will want to register
Registration link http://www.equitycoalition.org/index.php?/member/register
After you have registered, you will need to go to
http://www.equitycoalition.org/index.php?/member/login
Next, you have to go to http://www.equitycoalition.org/index.php?/member/profile and click
on “Edit Profile”
To create your anchor text, use your HTML code in the “Bio” section
HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>
To see the public view of your anchor text, click on your username
Here’s the public view of your anchor text links
As a bonus, I included an affiliate web site that is an alternative to clickbank. High Profit offers
high payout amounts on its products and has an amazing conversion rate.
http://www.highprofits.com/
First you will need to click on the tab that says “Forum”
Now you will need to register a new account
Once you have registered, click on the “Profile” link
Next, you will need to click on the “Edit Signature” link
You are given a WYSIWYG editor to create your anchor text links
To see the public view of your anchor text links, just click on your username
Here’s the public view of your anchor text links