Post on 09-Mar-2016
description
2
Body ComponentsBody Components
Part # Width Radius
01-001 60” 12”
01-002 60” Camber 12”
01-003 60” 6”
01-004 60” Camber 6”
01-013 66” Camber 6”
01-020 72” 12”
01-021 72” Camber 12”
01-022 72” 6”
01-023 72” Camber 6”
01-025 74” 12”
01-025-1 74” Camber 12”
01-027 74” 6”
01-027-DAL 74” Camber 4”
01-030 78” 12”
01-031 78” Camber 12”
Part # Width Radius
01-032 78” 6”
01-033 78” Camber 6”
01-038 80” 6”
01-040 84” 12”
01-041 84” Camber 12”
01-042 84” 6”
01-043 84” Camber 6”
01-050 90” 12”
01-051 90” Camber 12”
01-052 90” 6”
01-053 90” Camber 6”
01-060 96” 12”
01-062 96” 6”
01-063 96” Camber 6”
01-100 72” 5”
01-101 84” 5”
16 Gauge Steel (other material and special sizes available upon request)
1” SQUARE ROOF BOWS
AERODYNAMIC NOSE BOWS
Part # Depth Width Radius Material
01-600 25" 72” 12” Steel
01-600-A 25" 72” 12” Alum.
01-601 27” 78” 12” Steel
01-601-A 27” 78” 12” Alum.
01-602 27” 80” 12” Steel
01-650 28” 72” 6” Steel
01-654 28” 74” 6” Steel
01-651 28” 78” 6” Steel
01-652 28” 80” 6” Steel
01-656 28” 84” 6” Steel
01-658 28” 100” 6” Steel
Steel or Aluminum AvailableSpecial Sizes Available
AERODYNAMIC NOSE CAPS
Part # Width Radius Material
02-100 72” 12” 19 Gauge
02-100-A 72” 12” Alum.
02-101-A 78” 12” Alum.
02-102 80” 12” 19 Gauge
02-150 72” 6” 19 Gauge
02-151 78” 6” 19 Gauge
02-152 80” 6” 19 GaugeSteel or Aluminum Available
Special Sizes Available
Body
Com
ponents
3-PIECE STEEL ROOF CAPS
Part # Width Radius Material Mfg. #
02-003 60” 12” 19 Gauge n/a
02-012 72” 12” 19 Gauge n/a
02-020 84” 12” 19 Gauge n/a
Special sizes available upon request14”
14”
Width
12” R
12” R
3-PIECE STEEL ROOF CAPS
Part # Width Radius Material Mfg. #
02-013 72” 6” 19 Gauge n/a
02-005 60” 6” 19 Gauge n/a
Special sizes available upon requestWidth
8”
8”
6” R6” R
6” R
2-PIECE STEEL ROOF CAPS
Part # Width Radius Material Mfg. #
02-023 36” 12” 19 Gauge n/a
02-001 60” 12” 19 Gauge n/a
02-010 72” 12” 19 Gauge n/a
Special sizes available upon request
Width
12” R
15”
37”
30” R
or
36” R
2-PIECE STEEL ROOF CAPS
Part # Width Radius Material Mfg. #
02-002 60” 6” 19 Gauge n/a
02-011 72” 6” 19 Gauge n/a
Special sizes available upon request
Width
6” R
36”
6”
30” R
BALL CORNERS
Part # Size Material Mfg. #
02-031 6” 19 Gauge n/a
02-032 8” 19 Gauge n/a
02-030 12” 19 Gauge n/a
02-840-A 6” .080 Aluminum n/a
02-841-A 8” .080 Aluminum n/a
02-842-A 12” .080 Aluminum n/a
02-842-A-1 12” .050 Aluminum n/a
02-843-A 5” x 12” .080 Aluminum n/a
02-845-A 6” x 12” .080 Aluminum n/a
02-845-A-1 6” x 12” .050 Aluminum n/a
02-033 5” x 12” 19 Gauge n/a
02-033-G 5” x 12” 19 Gauge - Galvaneal n/a
02-034 6” x 12” 19 Gauge n/a
02-846-A 3” .050 Aluminum n/a
02-860-DAL 5” x 12” .050 Aluminum n/a
02-861-DAL 5” x 12” .050 Aluminum n/a
02-036 5” 19 Gauge n/a
02-036-A 5” .080 Aluminum n/a
Special sizes available upon request
5, 6, 8, 12” Radius
12” Radius
3
Body ComponentsBody Components
Body
Com
ponents
4
Body ComponentsBody Components
A = Width
B = Length (across the bottom)
C = Height
D = Stretch Out
- Single (fig. 1 & 5)
- Tandem (fig. 2 & 3)
- Triple (fig. 4)
- Round (fig. 1, 2, 3 & 4)
- Jeep (fig. 5)
- Straight (fig. 3)
- Tear Drop (fig. 2 & 4)
- Single Radius (fig. 6 & 8)
- Double Radius (fig. 7)
- 2” Radius (fig. 8)
- 1” Radius (fig. 6)
1.2.
4. 5.
6.
3.
7.
AB
C
D
Fenders come in various shape, sizes and material. The following drawings are designed to help you determine which fender
features will best suit your needs. Nuera Transport offers a wide assortment of fenders on the following pages, as well as special
order custom fenders. Please ask your sales associate for information on custom needs.
8.
2”
- 16 Gauge = Cold Roll Steel
- 16 Gauge Galv = Galvaneal Steel
- .090 Alum = Smooth Aluminum
- Alum TP = Tread Plate Aluminum
- 12 Gauge TP = Tread Plate Steel
FENDER FEATURE GUIDE
FENDER MEASUREMENTS
FENDER MATERIAL
FENDER LIP RADIUS
FENDER STYLE & TYPE
FENDER FEATURE GUIDE
Body
Com
ponents
5
Body ComponentsBody Components
SINGLE AXLE ROUND FENDERS
Part # Width Length Height Material Tire
03-001 7” 21” 5.75” 16 Gauge 8” Tire
03-002 7.5” 23.5” 6.5” 16 Gauge 10-12” Tire
Double Radius : 1.5” radius on both sides
Part # Width Length Height Material Tire
03-003 7” 28” 9.75” 16 Gauge 13” Tire
03-300 7” 22.5” 8.5” 16 Gauge 13”
03-309 9” 24” 12” 16 Gauge 14-15”
03-306 9” 30” 15” 16 Gauge 14-15”
03-004-P 9” 32” 16” 16 Gauge 14-15”
Double Radius : 1” radius on both sides
Part # Width Length Height Material Tire
03-004 9” 32” 15” 16 Gauge 14-15” Tire
03-005 10.75” 36” 20.5” 16 Gauge 15-16” Tire
03-005-A 10.75” 36” 20.5” .090 Alum 15-16” Tire
03-005-A-18 10.75” 36” 18” .090 Alum 15-16” Tire
03-007 10.75” 32” 16.5” 16 Gauge 15-16” Tire
03-006 13” 36” 20.5” 16 Gauge 16” Tire
03-003-1-P 8” 28” 11” 16 Gauge 13-14” Tire
03-301 9” 30” 15” 16 Gauge 14-15” Tire
03-003-1 7.75" 28" 9.5" 16 Gauge 13” Tire
03-003-8 8” 28” 11” 16 Gauge 13-14” Tire
03-005-TP 10.75" 36" 20" Tread Plate 15-16” Tire
Single Radius : 1” radius on front, 90 degree on back
Body
Com
ponents
6
Body ComponentsBody Components
Part # Width Length Height Material
03-020 9” 66” 19” 16 Gauge
03-030 9” 72” 20.5” 16 Gauge
03-040 10.75” 72” 20.5” 16 Gauge
03-030-TP 9” 72” Strt Trdplt 14 Gauge
Part # Width Length Height Material
03-842-A 10.75” 72” 20.5” .090 Alum
03-037 10” 68” 18” TD 16 Gauge
TANDEM AXLE 2” RADIUS TEAR DROP FENDERS
TANDEM AXLE STRAIGHT FENDERS
JEEP FENDERS
Part # Width Length Height Material Tire
03-010 8” 26” 10” 16 Gauge 13-14” Tire
03-010-1 8” 28” 14” 16 Gauge 13-14” Tire
03-010-2 8” 28” 10” 16 Gauge 13-14” Tire
03-011 10” 33” 16.5” 16 Gauge 14-15” Tire
03-011-A 10” 33” 16.5” .090 Alum. 14-15” Tire
03-011-1-A 10” 36” 19.25” .090 Alum 14-15” Tire
03-011-ATP 10” 33” 16.5” Alum TP 14-15” Tire
03-012 12” 29.5” 16.5” 16 Gauge 14-15” Tire
03-036 10” 72” 19” 16 Gauge Tandem Axle03-813-TP 10” 72” 19” 14 Gauge TP Tandem Axle03-809-ATP 10” 36” 17” Alum. TP 14-15” Tire
03-016-ATP 10” 66” 19” Alum. TP Tandem Axle03-017-ATP 10” 69” 19” .100 Alum. TP Tandem Axle03-72FBSB 10" 69" 19.5” Teardrop Tandem Axle03-811-A 10" 28” 10” .090 Alum. 13-14” Tire
03-811-ATP 10" 28” 10” Alum. TP 13-14” Tire
Body
Com
ponents
7
Body ComponentsBody Components
Body
Com
ponents
TANDEM AXLE TEAR DROP FENDERS
Part # Width Length Height Material
03-021 9” 66” 19” 16 Gauge Cold Roll
03-021-18 9” 66” 18” 16 Gauge Cold Roll
03-821-A 9” 66” 19” .090 Alum
03-031 9” 72” 20.5” 16 Gauge Cold Roll
03-031-TP 9” 72” 20” 14 Gauge Tread Plate Steel
03-032-A 9” 72” 21.5” .090 Alum
03-830-A 9” 72” 19” .090 Alum
03-831-A 10” 66” .090 Alum
03-041-C 10.75” 72” 20.5” 16 Gauge Cold Roll
03-041-G 10.75” 72” 20.5” 16 Gauge Galv
03-041-TP 10.75” 72” 20” 14 Gauge Tread Plate Steel
03-041-TPA 10.75” 72” 20.5” Alum. Tread Plate
03-840-A 10.75” 72” 19” .090 Alum
03-080 12” 72” 20.5” 16 Gauge Cold Roll
03-850-A 12” 72” 20.5” .090 Alum
03-060 13” 72” 20.5” 16 Gauge Cold Roll
03-860-A 13” 72” 20.5” .090 Alum
03-841-A 10.75” 68” 20.5” 1” R TD Alum
000-03-007 10.75” 68” 20.5” 16 Gauge Cold Roll
03-303 10.75” 72” 20.5” 14 Gauge Tread Plate Steel
03-302 9” 61” 16 Gauge Cold Roll
03-897 6.5” 72” .090 Alum
TRIPLE AXLE TEAR DROP FENDERS
Part # Width Length Height Material
03-050 10.75” 108” 20.5” 16 Gauge
03-052-A 10” 108” 20.5” .090 Alum
03-304 10.75” 108” 20.5” 14 Gauge
Available in steel or aluminum.
ALUMINUM FENDER FLARES
Part # Width Length Height Material
03-890 2.5” 70” .090 Alum
03-891 2.5” 72” .090 Alum
03-892 4.5” 72” .090 Alum
03-893 2.5” 108” (Triple) .090 Alum
03-894 4.5” 108” (Triple) .090 Alum
03-895 1” 72” .090 Alum
03-896 1” 108” 20” .090 Alum
8
Body ComponentsBody Components
FENDER BACKS
Part # Length Height Material
03-046 32” 9” 18 Gauge (precut for 32”)03-046-TP 32” 9” 14 Gauge Tread Plate (precut for 32”)03-044 63” 12” 18 Gauge (precut for 66” fender)03-045 69” 12” 18 Gauge (precut for 72” fender)03-045-TP 69” 12” 14 Gauge Tread Plate (precut for 72” fender)03-049 69” 12” 18 Gauge (square)03-045-1TP 69” 14” 14 Gauge Tread Plate (square)03-047 28” 7.75” 18 Gauge (precut for 28”)
Pre-cut fender backs are designed to fit easily into the corresponding fender. Simply lay the
back in and tack it at several locations. We also offer the square fender backs in order to allow the
flexibility to custom fit any odd shaped fender.
PLASTIC FENDERS
Part # Description
03-210 Injection Molded Fender, Black (7.5” x 33.5” x 8.75”) - 12” Tire
03-211 Injection Molded Fender, Black (9.7” x 43.4” x 12.75”) - 14” Tire
Note: White available on request.
Part # Description
03-213 Injection Molded Fender, Black (7” x 20.25” x 12.75”)03-220 Injection Molded Fender, Black (9.7” x 31.3” x 12.75”)03-217 Injection Molded Fender, White (7” x 20.25” x 6.25”)03-218 Injection Molded Fender, White (7.5” x 24” x 8.75”)03-214 Injection Molded Fender, Black (9” x 29.25” x 12”)03-212 Injection Molded Fender, White (9” x 40” x 12”)03-219 Injection Molded Fender, White (9.7” x 43.4” x 12.75”)03-215 Injection Molded Fender, White 10.25” x 45” x 14.85”)
Note: Stock fenders are colored as listed.Special order colors black, white, & silver are available on most sizes on request.
Body
Com
ponents
Part # Description
03-813-B Treadplate Back for 03-813-TP
9
Body ComponentsBody Components
BRUSH FENDERS
Part # Description Width Length Material
03-200 Brush Fender 10.75” 120” 10 Gauge
FLAT ESCAPE DOOR
Part # Description
04-019 Flat Escape Door 24” x 65” Framed (16 Gauge Steel)04-020 Flat Escape Door 20” x 39” Framed (16 Gauge Steel)
39”
20”
Our brush fenders are manufactured from heavy 10 gauge material. This
insures that they will stand up to the most damaging of abuse. Because we manu-
facture this item in our Arkansas facility, any special sizes or designs are available
upon request.
Escape doors include hinge and cut-out for standard flush lock. All doors are made from 16
gauge steel. Hole size - 2 3/4” x 3 3/4”
DIAMOND TREAD FENDER GUSSET
Part # Description
03-043 14 Gauge Diamond Tread Fender Gusset
This tough gusset is perfect for adding support to any fender. It measures 8” x 8” x 11” with
a 3/4” (90 degree) lip on the front. Because it is high definition plasma cut, it offers a clean edge
and product consistency.
Body
Com
ponents
30”
59”
Part # Description
04-021 Rolled Escape Door 30” x 59” Framed (16 Gauge Steel)- 5’ wide trailer - 30” Radius
ROLLED ESCAPE DOOR
Escape doors include hinge and cut-out for standard flush lock (2 3/4” x 3 3/4”).
30” Radius (5’ trailer)
36” Radius (6’ trailer)
10
Body ComponentsBody Components
SADDLE AND FEED DOORS
Part # Description
04-001 Rolled Feed Door 17” x 23” Framed (16 Gauge Steel)
All feed doors are non-stock items. They require additional lead time.
Part # Description
04-002 Flat Feed Door 18” x 24” Framed (16 Gauge Steel)
All feed doors are non-stock items. They require additional lead time.
24”
17”
23”
18”
30” R
Part # Description
04-010 Rolled Saddle Door 30” x 33” Framed (16 gauge Steel)
All saddle doors are non-stock items. They require additional lead time.
Part # Description
04-011 Flat Saddle Door 30” x 33” Framed (16 Gauge Steel)
All saddle doors are non-stock items. They require additional lead time.
30” R
30”
33”
33”
30”
Saddle and Feed doors include hinge and cut-out for standard flush lock. All doors are made
from 16 gauge steel. Hole size - 2 3/4” x 3 3/4”.
ROLLED NOSE ANGLES AND BOWS
Part # Description
05-001 Rolled Nose Angle - 60” Wide / 30” Radius
1.25” x 1.25” Angle (1/8” Steel) 05-002 Rolled Nose Angle - 72” Wide / 36” Radius
1.25” x 1.25” Angle (1/8” Steel) 05-003 Rolled Nose Bow 60” Wide / 30” Radius
1” Square Tube (16 Gauge Steel)05-004 Rolled Nose Bow 72” Wide / 36” Radius
1” Square Tube (16 Gauge Steel)
All rolled nose angles & bows are non-stock items. They require additional lead time.
The rolled nose bows are made from 1” square, 16 gauge tube. The rolled nose angle is
made from 1.25” x 1.25” angle (1/8” Steel). Because we manufacture this item in our Arkansas
facility, any special sizes or designs are available upon request.
Body
Com
ponents
11
Body ComponentsBody Components
WALL SLAT
Part # Description Width Height
06-001-R 18 Gauge Wall Slat 6” 20’
06-001-A Alum. Wall Slat 6” 20’6”
7/16”
Wall slat is available in either steel or aluminum.
48”
10”
5 1/8”
9 1/4”
1 1/4”
4 1/2” Dia.
Hole
Part # Description
06-011 Rear Brace - 10” Left Side Only
06-012 Rear Brace - 10” Right Side Only
The rear brace is manufactured from 14 gauge steel. The light hole is designed to accommo-
date any 4 1/2” light. See our lights and electrical section for our selection of lights.
GOOSENECK GUSSETS / BRACES
16 GAUGE STEEL BODY PANELS
Part # Description Width Height Material
06-050 Body Panel 96” 47.5” 16 Gauge
06-060 Body Panel 120” 47.5” 16 Gauge Width
Height
Our body panels are made from 16 gauge material and have 3 ribs for increased strength.
Because we manufacture this item in our Arkansas facility, any special sizes or designs are available
upon request.
Body
Com
ponents
12
Body ComponentsBody Components
GRAVEL GUARD
Part # Description
07-301 Gravel Guard - 9” Wide
07-201 Gravel Guard - 12” Wide
07-203 Gravel Guard - 14” Wide
07-202 Gravel Guard - 18” Wide
Gravel guard is used on the frontal exposed surface of a trailer to minimize rock damage.
Sold either by the foot in 10 ft. increments or entire roll.
PIPE BOWS
1 5/8”
Part # Width Radius Height Material
01-500 72” 6” 78” 1 5/8” Pipe
Because we manufacture this item in our Arkansas facility, any special sizes or designs are
available upon request.
TRIM AND MOLDING
Part # Description Width Length
07-001 V-Chrome 1 1/8” 12’
Part # Description Width Length
07-006 Drip Rail 1” 12’
VINYL SAFETY TREAD
Part # Description
07-400-A 9” Black Vinyl Safety Tread
07-410-A 12” Black Vinyl Safety Tread
07-420-A 18” Black Vinyl Safety Tread
Vinyl safety tread has a pebbled, non-skid surface on one side and is self adhesive on the
other. Sold either by the foot in 10 ft. increments or entire roll (150 feet per roll).
Body
Com
ponents
13
Body ComponentsBody Components
TRIM AND MOLDING
Part # Description Width Length
07-002 Lipped Trim 1” 12’
07-003 Lipped Trim 1 1/4” 12’
Part # Description Width Length
07-004 Flat Trim 3/4” 12’
Part # Description Width Length
07-010 Alum. Molding w/Slot 1 1/4” 12’
Part # Description
07-010-1 Decorative Chrome Cap End
Part # Description
07-011 Black Vinyl Insert
07-011-Red Red Vinyl Insert
07-011-White White Vinyl Insert
VINYL INSERT
Vinyl insert is used with the slotted aluminum trim (part # 07-010) above.
Body
Com
ponents