Post on 29-Nov-2021
1
NUANCE POWERSHARE WORKFLOWS
EMERGENCY DEPARTMENT
Studies can only be exchanged with entities that are listed in the PowerShare ‘Contacts’ list.
Login: go to the web site https://www1.nuancepowershare.com/smr/login
Enter Username and password then click ‘Sign In’. Your sign in should be your work email
Upon login, your home screen will appear as below:
2
Receiving Studies & Importing to PACS
1. Receive studies from an outside contact and push to Philips PACS:
A. Contact entity and request them to ‘Share’ images to Phoenix Children’s Hospital
through PowerShare.
B. When studies arrive, they will display in PowerShare under the ‘Images’ tab.
C. To modify studies (change MRN, etc.) before sending to PCH PACS, select study be
modified by clicking in the upper left check box (shown above) in the study frame. Then
click on ‘Summary/ Edit’ at the lower right of the screen.
3
D. The screen below will appear to make the necessary changes. Click “Save Changes”
once you’re done
E. To begin upload, insure the check box on top left side of study is selected.
F. Click on ‘Push to Accelerator’ from the list on the right of the screen.
4
G. Select destination (Philips IPACS OUTSIDE) and Click ‘Send to Accelerator’
H. Study will be sent to destination (Philips IPACS).
5
Sending Studies Out
2. Send studies to an outside contact:
A. Upload studies to PowerShare folder
Philips PACS: direct send
Locate and select studies that will be sent.
Right click on the exam; From the drop down menu select “Export Via Dicom”
You will get a validation window asking you to confirm, Click “Next”
6
The destination window will appear; put a check in the box next to Powershare, click next
A confirmation window will appear; If you agree with everything click “Finish”
Study will appear in PowerShare cloud within a few minutes.
7
Add user to PowerShare as a contact
In order to give a user access to PowerShare so that you may share files do the following:
Click on the “Contacts”
Once the user list is displayed, Click “Add New Contact” to create a new contact
8
Once in the “Add Contact” page, press the down arrow in the Category box to select contact
type
After selecting category complete name and e-mail field and click on “Search” button;
9
If the contact is not in the database you will notice an “Invite” button , as shown below. If the
contact is in the database, Powershare will notify you and you can move on to sharing the
image.
10
An Invite window will appear; Enter a message you want the contact to read, If you want to
give access to upload images click on “allow” option in window. Click the “submit” button to
deliver
You will get the following message once completed:
11
Once the invite is sent, the contact will get an e-mail. When they respond to this e-mail and
register themselves, You will get the following notice below in your e-mail letting you know
that they are active:
When you get this notification, you can share images with them.
12
Sharing images on Powershare
Go to the images menu option and click
In the Images window, select the study by clicking the small box next to it. then click on “share
these images”
You will enter the “contacts” window. Select your contact then click on the “share with
contacts” button
13
Uploading Images to PowerShare
To Upload images go to your home screen and click on the upload images icon:
14
This will bring you to the upload window. Be sure that “Phoenix Childrens Hospital” is in the “Upload To”
box. Click on the blue “Choose Folder button to select the folder that the images are located to be
uploaded;
Once you have selected the folder, click the upload button
15
After clicking upload, the image information will display in Powershare before the final upload. Select
the study by checking the box next to it and click the upload button:
Once this is done you will get a confirmation page, informing you that the images were uploaded.