Post on 27-Jan-2021
Managing Webex Meetings Guide for Cisco Webex Meetings ServerRelease 4.0First Published: 2019-05-01
Last Modified: 2020-04-03
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000
800 553-NETS (6387)Fax: 408 527-0883
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITHTHE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY,CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version ofthe UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHERWARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS.CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUTLIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERSHAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, networktopology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentionaland coincidental.
All printed copies and duplicate soft copies of this document are considered uncontrolled. See the current online version for the latest version.
Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.comgo trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and anyother company. (1721R)
© 2020 Cisco Systems, Inc. All rights reserved.
www.cisco.com/go/trademarkswww.cisco.com/go/trademarks
C O N T E N T S
Get Started 1C H A P T E R 1
Video-Centric Experience for Meetings 1
Full-Screen Video Layouts 5
Floating View 6
Active Speaker View 6
Active Speaker and Thumbnail View 7
Grid View 8
Switch Between Video Layouts 9
Full-Screen Layouts and Content Sharing 10
Host a Cisco Webex Meeting—Quick Reference 13
Notes, Meeting Minutes, and Closed Captions—Quick Reference 15
Manage Audio 17C H A P T E R 2
Connect to Audio 17
Get a Called at a Different Number 18
Adjust Your Microphone and Speaker Volume 18
Mute or Unmute 19
Manage Video 23C H A P T E R 3
Stop and Start Your Video During a Meeting 23
Switch Cameras During a Meeting 24
Increase the Brightness and Contrast for Your Video 25
Select Who You Want to Focus on in a Meeting 26
Select the Focus for the Main Video 27
Select the Focus of the Thumbnail Video 29
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.0iii
Manage Your Meeting 31C H A P T E R 4
Start a Poll—Windows 31
Start a Poll—Mac 33
Start a Poll—Quick Reference 34
Record a Meeting 36
Admit Participants Waiting in Your Personal Room Lobby 37
Lock Your Personal Room Meeting 38
Share Content 41C H A P T E R 5
Share Your Content 41
Share Multimedia Content in the Multimedia Viewer 42
Allow Participants to Annotate Shared Content 43
Draw an Annotation 45
Move an Annotation 45
Troubleshooting 47C H A P T E R 6
Run a Problem Report in a Webex Meeting 47
Use Health Checker 49
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.0iv
Contents
C H A P T E R 1Get Started
• Video-Centric Experience for Meetings, on page 1• Host a Cisco Webex Meeting—Quick Reference, on page 13• Notes, Meeting Minutes, and Closed Captions—Quick Reference, on page 15
Video-Centric Experience for MeetingsWe’ve made your meetings more engaging bymaximizing the space for video collaboration.Meet face-to-faceand see colleagues’ expressions as if you’re sitting at the same table.Figure 1: Video Centric Layout
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.01
You also have more control of who and what you see using new video and video + sharing layouts. Lockfocus on one person, keep content and video views side-by-side, or move panels to another monitor. Choosewhat works best for you.Figure 2: Video Layouts
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.02
Get StartedVideo-Centric Experience for Meetings
Figure 3: Share Content
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.03
Get StartedVideo-Centric Experience for Meetings
Figure 4: Video + Share Content
We’ve also centralized the essential meeting controls, like Mute, Share, or Record. The controls hide whenyou’re not using them. Just move your cursor to make them reappear.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.04
Get StartedVideo-Centric Experience for Meetings
Figure 5: Meeting Controls
Full-Screen Video LayoutsIf there are more than two participants in a meeting, you can switch between three different video views:
• Active speaker view
• Active speaker and thumbnail view
• Grid view
There are advantages to using each of these video layouts. You can change views at any time depending onthe number of active speakers and the total number of participants in your meeting.
The Floating view allows you to make the view of the other speaker full-screen. Select at the top rightof the screen.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.05
Get StartedFull-Screen Video Layouts
Floating ViewFloating view gives you control of where to position your other panels—like participants or chat—in relationto the video panel. You can even move them to a second monitor or resize them.
Active Speaker ViewActive speaker view displays a full-screen video of whoever is speaking. This video layout is useful forone-on-one conversations or when you're meeting with only a few others. Active speaker view is the video-onlylayout that is used in meetings between two people.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.06
Get StartedFloating View
Active Speaker and Thumbnail ViewActive speaker and thumbnail view displays whoever is speaking in the primary video, and up to five thumbnailvideos of other participants. This video layout is useful when you intend to focus on the active speaker, butstill want to see the other participants' videos. Active speaker and thumbnail view is the default video-onlylayout.
The sort order of the thumbnail videos is based on who has the host and presenter roles, who has spoken mostrecently, who is showing their video, and alphabetical order. Participants who spoke most recently appearfirst, followed by participants who are sending their video.
You can adjust which participants you see in the thumbnail videos by selecting the Next Videos and
Previous Videos icons.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.07
Get StartedActive Speaker and Thumbnail View
Grid ViewGrid view allows you to see up to 25 participants at the same time. This video layout is useful when you wantto divide your attention among multiple speakers or want to collaborate with a larger group of participants.
The sort order of the thumbnail videos is based on who has the host and presenter roles, who spoke mostrecently, who is sending their video, and alphabetical order. Participants who spoke most recently appear first,followed by participants who are sending their video.
If there are more than 25 participants, you can adjust who you see by selecting the Next Videos and
Previous Videos icons.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.08
Get StartedGrid View
Switch Between Video LayoutsIn a meeting, there are three different video-only layouts: Active Speaker and Thumbnail View, Active SpeakerView, and Grid View. If there are more than two participants, you can choose between these three views.
You can also select the Floating Layout. Floating Layout is a fullscreen mode if you're in a meeting with onlyone other participant. If you're in a meeting with multiple participants, Floating View allows you to move andresize the panels.
Procedure
Step 1 To change the view, select the Active Speaker and Thumbnail View or the Floating View icon at the top rightcorner of your screen.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.09
Get StartedSwitch Between Video Layouts
The default layout is the Active Speaker and Thumbnail View, but the icon changes to reflect thelayout you're currently using.
Note
Step 2 The section menu expands, and then you can select a different view.
• To use the Active Speaker View, select
• To use the Active Speaker and Thumbnail View, select
• To use the Grid View, select
Full-Screen Layouts and Content SharingWhile sharing content, you can switch between three different full-screen layouts:
• Active Speaker and Thumbnail View
• Side-by-Side View
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.010
Get StartedFull-Screen Layouts and Content Sharing
• Floating View
There are advantages to using each of these video layouts. You can decide which layout to use depending onthe number of active speakers and the total number of participants you expect in your meeting.
The maximum number of participants that can connect to a meeting with high definition video quality is 1,000and with standard video quality it's 1,000.
Note
Active Speaker and Thumbnail View
In Active Speaker and Thumbnail view, the focus shifts to the shared content when someone starts sharing.
Side-by-Side View
The Side-by-Side View allows you to view the shared content next to the videos of participants.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.011
Get StartedFull-Screen Layouts and Content Sharing
Floating View
The Floating View allows you to resize or move panels around shared content, even to a second monitor.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.012
Get StartedFull-Screen Layouts and Content Sharing
Host a Cisco Webex Meeting—Quick ReferenceIt can be helpful to have a quick reference sheet when hosting a meeting in Cisco Webex Meetings. At aglance you can see best practices for interacting with attendees, meeting basics, and more.
TheMeeting window lets you do the following:
• Manage all aspects of the meetings.
• Chat, send video, share information, and interact with participants.
ActionTask
On the meeting control strip, selectMore options >Invite and Remind, and enter the requestedinformation.
Invite people to a meeting in progress
Select Participant > Entry and Exit Tone.Turn off participant entry and exit beeps and tones
• Tomute everyone as they join the meeting, selectParticipant >Mute on Entry.
• To mute or unmute everyone but you, selectParticipant >Mute All.
• To mute someone specifically, selectParticipant >Mute or Unmute.
Mute participant microphones
SelectMeeting >Welcome Message.Edit a welcome message
On the meeting control strip, select Recorder.
Pause and resume the recording asnecessary, rather than stopping andrestarting recording, to avoid creatingmultiple recording files.
Tip
Record your meeting
Review the list of people waiting to join and choosewho to admit:
• To admit individual people select the check boxnext to their names and select Admit.
• To admit everyone who's waiting, select theSigned In check box and select Admit.
Let someone into your Webex Personal Room
Right-click the name in theParticipants list and selectRename.
Rename a call-in user
Right-click the Participants title and select SoundAlerts.
Edit sound alerts
Right-click the Chat title and select Sound Alerts.Edit the sound that plays when someone enters a chatmessage
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.013
Get StartedHost a Cisco Webex Meeting—Quick Reference
ActionTask
Select Participant > Assign Privileges, and thencheck or uncheck the appropriate option.
Grant or remove privileges (must be current presenter)
Drag the Webex ball to the next presenter.Make someone else the presenter
Right-click the name or thumbnail and selectChangeRole to > Host.
Make someone else the host
Select your name in the Participant list, then selectParticipant > Reclaim Host Role, and enter therequested information.
Reclaim the host role
Right-click the name in theParticipants list and selectExpel.
Remove a participant from a meeting
SelectMeeting > Lock Meeting.
This option prevents anyone from joiningthe meeting, including those who wereinvited but haven't joined yet.
Note
Lock meeting access
SelectMeeting > Unlock Meeting.Unlock meeting access
SelectMeeting > Information or click the Meetinginformation icon in the upper left corner.
Get information about a meeting in progress
On the meeting control strip, select Leave .Leave a meeting
On the meeting control strip, select Leave and thenconfirm you want to end the meeting.
End a meeting
Select File > Send Transcript, enter the requestedinformation, and send the email.
If you saved them during the meeting, youcan also attach:
Note
• Shared documents
• Chat
• Poll questionnaire
• Poll results
• Public notes or closed captions takenor published during the meeting
The transcript does not include audio-onlyparticipants.
Send a meeting transcript email
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.014
Get StartedHost a Cisco Webex Meeting—Quick Reference
Notes, Meeting Minutes, and Closed Captions—QuickReference
There are some things to keep in mind before you start managing and taking notes:
• If all participants are allowed to take notes, they cannot publish their notes to others during the meeting,but they can save them.
• A single note taker can publish notes at any time during the meeting or can send a meeting transcript toall participants.
• A closed captionist can publish captions in real time during the meeting and can also send a transcriptcontaining the captions to all participants.
ActionTask
On the Participants panel, right-click the participant,and then select Change Role To > Note Taker.
A pencil indicator appears to the right of theparticipant's name.
Designate a note taker
On the Participants panel, right-click the participant,and then selectChangeRole To >ClosedCaptionist.
A closed caption indicator appears to the right of theparticipant's name.
Designate a closed captionist
In the meeting window, selectMeeting > Options.In theMeetingOptions dialog box, check or uncheckEnable Closed Captioning.
Enable closed captions
Type the notes on the Notes panel in your meetingwindow.
Take personal notes
In the Notes or Closed Captions panel, click Save.Save notes to a file
If you are the single note taker for a meeting, type thenotes on the Notes panel in your meeting window.Your notes are not visible to others until you publishthem.
Take public notes (Meeting Minutes)
If you are the closed captionist for a meeting, type thecaptions on the Closed Captions panel in yourmeeting window. You can use either a standardkeyboard, or a steno keyboard andmachine translationsoftware. Your captions are visible to others as youpress the Enter key, or select Publish.
Provide closed captions
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.015
Get StartedNotes, Meeting Minutes, and Closed Captions—Quick Reference
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.016
Get StartedNotes, Meeting Minutes, and Closed Captions—Quick Reference
C H A P T E R 2Manage Audio
• Connect to Audio, on page 17• Get a Called at a Different Number, on page 18• Adjust Your Microphone and Speaker Volume, on page 18• Mute or Unmute, on page 19
Connect to AudioWhen you start or join a meeting, the Audio and Video Connection dialog opens so that you can choosehow to connect your audio and video.
Procedure
Step 1 From the Select Audio Connection drop-down list, select your audio connection.
If you select Call Using Computer, select the Use System Setting option to use your computerspeakers and microphone.
Note
Step 2 Select Connect Audio or Connect Audio and Video.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.017
Webex saves your audio and video selections for your next meeting on the same site.Note
Get a Called at a Different NumberProcedure
Step 1 On the meeting control strip, selectMore options .Step 2 Select Audio Connection, and then choose Switch Audio.Step 3 Select Call me at a different number.
Step 4 Enter a phone number and select Call Me.
Webex Meetings remembers the phone number that you enter, for your next meeting on the same site.
Adjust Your Microphone and Speaker VolumeIf you’re having difficulty hearing or being heard during a meeting, you can adjust the speaker or mic volumeon your computer.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.018
Manage AudioGet a Called at a Different Number
Procedure
Step 1 On the meeting control strip, selectMore options.Step 2 Select Audio Connection > Change settings.
Step 3 Select Test to hear the volume at its current setting.
You can use the sliders to adjust the speaker volume and microphone sensitivity.
Mute or UnmuteDuring a meeting, you want to be heard when you are speaking and your line to be silent when you are not.You can use the mute function to prevent background noise from being heard.
If you are the meeting host, you can also mute or unmute the participants who are in your meeting. This isuseful to reduce background noise or to prevent participants speaking out of turn.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.019
Manage AudioMute or Unmute
To mute or unmute yourself, selectMute or Unmute .
If you use your computer for audio and you mute or unmute yourself from your headset, it also mutes orunmutes you in the Participants panel. Similarly, muting or unmuting from the Participants panel alsoaffects your headset.
Mute Background Noise
Cisco Webex Meetings prompts you to mute yourself if the application detects background noise comingfrom your microphone.
If sounds are incorrectly detected as noise, you can select Not a noise.
If you don’t want to be warned about background noise coming from your microphone, you can selectDisablenoise detection.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.020
Manage AudioMute or Unmute
As Meeting Host
To mute or unmute specific people, go to the Participants panel, find their name, and selectMute
or Unmute .
You can also mute everyone at once or as they join your meeting. This can be useful to prevent your meetingparticipants from creating background noise or distracting others.
• To toggle mute for everyone at once, from the Participant menu, selectMute All or Unmute All.
• To configure your meeting to mute each participant as they join the meeting, from the Participantmenu,selectMute on Entry.
When you're sharing, clickMute Me on the floating control strip at the top of your screen to mute yourmicrophone.
You can also press *6 on your video device to mute or unmute yourself.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.021
Manage AudioMute or Unmute
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.022
Manage AudioMute or Unmute
C H A P T E R 3Manage Video
• Stop and Start Your Video During a Meeting, on page 23• Switch Cameras During a Meeting, on page 24• Increase the Brightness and Contrast for Your Video, on page 25• Select Who You Want to Focus on in a Meeting, on page 26
Stop and Start Your Video During a MeetingIf you're currently sending video and you want to stop, you can. You can also start (or restart) sending videomid-meeting.
Procedure
Step 1 To stop your video during the meeting, select , and then select Stop My Video.
Step 2 To start or restart your video during a meeting, select , and then select Start My Video.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.023
Switch Cameras During a MeetingBefore you begin
If you have multiple cameras and the one you're using isn't working correctly, you can switch to another.
Procedure
Step 1 On the meeting control strip, select .Step 2 In the Video Connection dialog box, select the camera that you want to use.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.024
Manage VideoSwitch Cameras During a Meeting
The gear icon appears only on Microsoft Windows.Note
Increase the Brightness and Contrast for Your VideoBefore you begin
Video can appear dark because of poor lighting, excess reflection, or dark clothing. You can increase thebrightness and contrast so that others can see you better.
Procedure
Step 1 On the meetings control strip, select .
Step 2 In the Video Connection dialog box, select .
isn't available on Mac.Note
Step 3 Adjust the settings to your preference, and then select Apply.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.025
Manage VideoIncrease the Brightness and Contrast for Your Video
Select Who You Want to Focus on in a MeetingYou can lock the video focus of the main video on you, a specific participant, or on the active speaker. Ifyou're the host, you can determine whose video you and your participants see.
Users joining from video devices always see the active speaker.Note
Each participant can choose who appears in their thumbnail videos. When you lock a thumbnail video infocus, only your view is affected.
The thumbnail videos cannot be locked for everyone in a specific arrangement by the host. Each participantcan lock their thumbnail videos in a view that they want.
Note
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.026
Manage VideoSelect Who You Want to Focus on in a Meeting
Before you begin
You can lock focus on a specific participant in the main video window. Even when someone else is speaking,you see only the participant on whom you've locked focus. If you're the host of the meeting, you can lock thefocus for all meeting participants. You can also lock focus on the thumbnail video.
Select the Focus for the Main Video
Procedure
PurposeCommand or Action
If the host already locked the video on a
participant, you can't select . Instead, a pinAt the top of the screen, select .
Step 1
appears next to the name of the person, onwhom video is locked:
If you're a participant, go to Step 3. If you'rethe host, choose from one of the following:
Step 2
• SelectMe to lock the main video on aspecific participant for yourself only.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.027
Manage VideoSelect the Focus for the Main Video
PurposeCommand or Action
• Select Everyone to lock the main videoon a specific participant for everyone inthe meeting.
Select the participant on whom youwant to lockthe video:
Step 3
• If you know the name of the participant,type it in the Search for a name text box.
• If you don't know the name of theparticipant, scroll through theParticipantslist.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.028
Manage VideoSelect the Focus for the Main Video
Select the Focus of the Thumbnail Video
Procedure
Step 1 Place your cursor over a thumbnail video, and then select .
You can lock focus on the first 6 thumbnail videos.
Step 2 Select the participant on whom you want to lock the video:
• If you know the name of the participant, type it in the Search for a name text box.
• If you don't know the name of the participant, scroll through the Participants list.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.029
Manage VideoSelect the Focus of the Thumbnail Video
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.030
Manage VideoSelect the Focus of the Thumbnail Video
C H A P T E R 4Manage Your Meeting
• Start a Poll—Windows, on page 31• Start a Poll—Mac, on page 33• Start a Poll—Quick Reference, on page 34• Record a Meeting, on page 36• Admit Participants Waiting in Your Personal Room Lobby, on page 37• Lock Your Personal Room Meeting, on page 38
Start a Poll—WindowsAs a presenter, you can use a poll to create and share questionnaires. Polls are useful for gathering feedback,taking votes, or testing knowledge.
Procedure
Step 1 Select View > Panels >Manage Panels to add the Polling panel to your meeting.Step 2 On theManage Panels dialog box, select Polling from the Available panels list, click Add, and then click
OK.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.031
Step 3 Select the question type from the drop-down list in the Question section of the Polling panel.
• Select Short answer if you want a poll with a type in short answer.• SelectMultiple choice - Multiple Answers if you want a poll with multiple answers from a list ofpossibilities.
• SelectMultiple choice - Single Answer if you want a poll with one answer from a list of possibilities.
Step 4 Click New to create a new question.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.032
Manage Your MeetingStart a Poll—Windows
Step 5 Type your question in the text box that appears and press Enter. In the text box that appears, type an answerto your question and press Enter.
Step 6 (Optional) Repeat this process for as many questions and answers that you want to add.Step 7 Click Open Poll.
Start a Poll—MacAs a presenter, you can use a poll to create and share questionnaires. Polls are useful for gathering feedback,taking votes, or testing knowledge.
Procedure
Step 1 Select View > Panels >Manage Panels to add the Polling panel to your meeting.Step 2 On theManage Panels dialog box, select Polling, click Add, and then, click OK.
Step 3 Go to the Polling panel for each question and answer that you want to create.
• Click the Add a Question icon to add a new question.
• Click the Add an Answer icon to add a new answer.
Step 4 Select the question type from the drop-down list in theQuestion section of the Polling panel for each questionthat you create.
• SelectMultiple Answers if you want to select multiple answers from a list of possibilities.• Select Single Answer if you want to select one answer from a list of possibilities.• Select Short Answer if you want to type in a short answer.
Step 5 (Optional) Repeat this process for as many questions and answers that you want to add.Step 6 Click Open Poll.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.033
Manage Your MeetingStart a Poll—Mac
Start a Poll—Quick ReferenceActionTask
Windows: Select the question that youwant to changeand then select the new question type from thedrop-down list. Select Change Type to save thechange.
Mac: Select Click here to change question type.
Change the question type
Select the question or answer, select , and thenmake your changes.
Edit a question or answer
Select the question or answer, and then select .Delete a question or answer
Select the question or answer, and then select the
Move Up orMove Down icon.
Rearrange questions or answers
Select Clear All at the bottom of the Polling panel.Delete an entire questionnaire
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.034
Manage Your MeetingStart a Poll—Quick Reference
ActionTask
1. Windows: Select Options at the bottom of yourPolling panel.
Mac: Select the Options icon on thelower-right portion of the Polling panel.
2. Check the Display check box, type the length oftime in the Alarm box, and then click OK.Figure 6: Windows
Figure 7: Mac
Display a timer during polling
1. Select Open Poll.
2. Select Close Poll to close your poll. If the poll istimed, it closes automatically.
Open a poll
In the Share with attendees section, check the Pollresults check box or the Individual results checkbox, and then select Apply.
Share poll results with participants
Select File > Save > Poll Questions or select .Save a poll questionnaire
Select File > Save > Poll Results or select .Save the results of a poll
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.035
Manage Your MeetingStart a Poll—Quick Reference
ActionTask
Select File > Open Poll Questions or select .Open a poll questionnaire file to display thequestionnaire on your Polling panel
1. Windows: Select Options at the bottom of yourPolling panel.
2. Mac: Select the Options icon on thelower-right portion of the Polling panel.
3. Check one or both of the following check boxes:
• Check the Include no answer check box toshare the number of people who didn'trespond to a question.
• Check the Shownumber of responses checkbox to share the number of responses eachanswer received.
Specify options for poll results
Record a MeetingThe Recorder icon is on the meeting controls strip. If the recording option isn't available, you can't record themeeting. Only the host or an alternate host can record a meeting.
If an alternate host records the meeting, the meeting host owns the recording after the meeting ends. Thesystem sends an email to the meeting host when the recording is ready.
Note
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.036
Manage Your MeetingRecord a Meeting
Procedure
Step 1 Select .Step 2 Select Record.
Step 3 (Optional) During the meeting, select , and do one of the following:
• Select Pause and Resume to maintain a single recording.• Select Stop to end your current recording. If you start the recording again, the system creates a separatefile.
After the meeting ends, you receive an email with a link to the recording. Depending on file size and bandwidth,it can take up to 24 hours to receive your recording. To access your recordings on your Webex site, go toClassic View > Recordings.
Admit Participants Waiting in Your Personal Room LobbyIf you're hosting a meeting in your Personal Room and it's locked, people have to wait for you to let theminto your meeting. You choose who you want to let into your Personal Room, and who you want to keep out.You'll see a notification when people are waiting to join the meeting.
Procedure
Step 1 To see who's waiting to join, click the notification.
The notification appears on the meeting controls strip if the Participants panel is closed.
The notification appears in the Participants panel if the panel is open.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.037
Manage Your MeetingAdmit Participants Waiting in Your Personal Room Lobby
Step 2 Review theWaiting to Join list, and choose who to admit:
• To admit individual people select the check box next to their names and select Admit.
• To admit everyone who's waiting, check the Select All check box, and then select Admit.
If the notification closed, select in the Participants panel.Tip
Lock Your Personal Room MeetingIf you prefer not to use the autolocking feature, you can lock your Personal Room meetings manually.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.038
Manage Your MeetingLock Your Personal Room Meeting
Procedure
Step 1 Start your meeting as usual.
Step 2 Hover over the meeting controls and select .Step 3 Select Lock Meeting
To unlock your meeting, repeat Step 2 and then select Unlock Meeting.Tip
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.039
Manage Your MeetingLock Your Personal Room Meeting
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.040
Manage Your MeetingLock Your Personal Room Meeting
C H A P T E R 5Share Content
• Share Your Content, on page 41• Share Multimedia Content in the Multimedia Viewer, on page 42• Allow Participants to Annotate Shared Content, on page 43• Draw an Annotation, on page 45• Move an Annotation, on page 45
Share Your ContentParticipants in Cisco Webex Meetings can keep everyone informed and engaged by sharing nearly any typeof content during a meeting.
The Share option is located on the meeting control strip.
Share Everything on Your Computer Screen
Select Share and Screen.
In Webex Meetings, if you're sharing a video or animation, you can optimize the share to ensure that thecontent plays smoothly. For more information, see ShareMotion and Video Content in CiscoWebexMeetings.
Tip
Share a File
To share a file, select Share and Share File.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.041
https://collaborationhelp.cisco.com/article/517f0j
Share an Application
To share an application that is open, select Share and select the application from the list of openapplications.
To share an application that is not open, select Share and Other Applications, then select
next to the application you want to share.
Applications that you can share include web browsers, multimedia viewers and players, files or applicationson a remote computer (using Access Anywhere), and any other application that appears in the list ofapplications.
Share the Whiteboard
To share a blank work area where you can collaborate with other meeting participants using both text and
graphics tools, select Share and New Whiteboard.
Stop Sharing
At the top of the screen, select Stop Sharing on the floating bar.
If you don't see Stop Sharing, hover over the You're sharing message at the top of the screen to show thefloating meeting control strip. The message looks similar to the following:
Tip
Share Multimedia Content in the Multimedia ViewerYou can use the Multimedia Viewer panel to share web pages and multimedia content with attendees.
Procedure
Step 1 Select Share >Multimedia.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.042
Share ContentShare Multimedia Content in the Multimedia Viewer
Step 2 Enter the URL for the content that you want to share. After you select OK, the content appears in theMultimedia Viewer panel.
To stop sharing, right-click (Windows) or Ctrl-click (Mac) theMultimedia Viewer title bar, and then chooseStop Multimedia Sharing.
A Share Multimedia link appears in the panel so that you can easily share again.
The audio for the Multimedia Viewer is separate from the audio for your meeting. Multimedia audio playslocally through your computer audio, not through your audio connection to the meeting.
Note
Allow Participants to Annotate Shared ContentHosts can allow participants to annotate shared content. This allows participants to interact and to drawattention to important information.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.043
Share ContentAllow Participants to Annotate Shared Content
Procedure
Step 1 To allow all participants to annotate content, during the meeting, on the Participant menu, select AssignPrivileges, select Participants, and select Annotate.
Step 2 To allow a specific participant to annotate, in the Participants list, right-click the person's name and selectAllow to Annotate.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.044
Share ContentAllow Participants to Annotate Shared Content
Draw an AnnotationHosts can annotate shared content. If you're a participant and the host allows you to annotate shared content,you can draw on and add shapes to shared content too.
Procedure
Step 1 To draw an annotation, select one of the options on the Annotate toolbar.Step 2 Press the left mouse button and drag the mouse to draw.
You can draw consecutive annotations.
Ensure that your cursor is in draw mode and not move mode . For example, if you selected the
square shape on the toolbar, move your cursor until it changes to the draw cursor .
If you want to continue to draw directly on top of the annotation that you just drew, hold down theCtrl key in Windows (Command key on a Mac) to force the cursor into draw mode. Next, pressthe left mouse button and drag to draw.
Tip
Move an AnnotationOnly the presenter can move annotations. It's helpful to move annotations if they overlap other content andmake it difficult to see what's being shared.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.045
Share ContentDraw an Annotation
Procedure
Step 1 To move a shape, hover over the border of the shape until your cursor changes to , and then drag the shapeto its new location.
Step 2 To move a line, pen drawing, or text, hover directly over it until your cursor changes to the move cursor ,and then drag the annotation to its new location.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.046
Share ContentMove an Annotation
C H A P T E R 6Troubleshooting
• Run a Problem Report in a Webex Meeting, on page 47• Use Health Checker, on page 49
Run a Problem Report in a Webex MeetingIf you experience an issue with a meeting, you can run a problem report to collect troubleshooting data. CiscoTechnical Support can use this data to help identify and fix the problem. We recommend that you provide asmuch detail as possible, about the issue.
Procedure
Step 1 Open the Help menu, and then select Send Problem Report.
Step 2 Enter a description of the problem.Step 3 (Optional) Check the corresponding check boxes to specify the information to include in the report.
Windows:
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.047
Mac:
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.048
TroubleshootingRun a Problem Report in a Webex Meeting
You can check some, all, or none of the boxes.
Step 4 Select Send Report.
You receive an email confirmation with a tracking ID. Provide this tracking ID to your Webex supportrepresentative.
You can also use the Webex Tracer tool for Windows or Mac to reproduce an issue and gather logs forsubmission to Cisco Technical Support.
Use Health CheckerApplies to Windows and Mac
The in-meeting Health Checker provides easy to understand information about meeting performance, basedon network and system conditions. Use Health Checker to help you troubleshoot and resolve issues withmeeting performance.
Procedure
Step 1 Go to Help > Help Checker.Step 2 For more details, hover over a health status indicator:
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.049
TroubleshootingUse Health Checker
https://help.webex.com/article/WBX000026383https://help.webex.com/article/WBX000026384
DescriptionHealth StatusColor
You can enjoy the full meetingexperience.
GoodGreen
Issues may create some limitationsfor your meeting experience.
PoorYellow
Issues are limiting your meetingexperience.
BadRed
If Health Checker identifies a problem, it provides a summary of the problem and a list of actions you canfollow to help solve the problem.
Step 3 (Optional) To send a problem report directly from Health Checker, select Send Problem Report.Step 4 (Optional) For more information about CPU and memory usage, select Audio & Video Statistics.
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.050
TroubleshootingUse Health Checker
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.051
TroubleshootingUse Health Checker
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.052
TroubleshootingUse Health Checker
Managing Webex Meetings Guide for Cisco Webex Meetings Server Release 4.0ContentsGet StartedVideo-Centric Experience for MeetingsFull-Screen Video LayoutsFloating ViewActive Speaker ViewActive Speaker and Thumbnail ViewGrid View
Switch Between Video LayoutsFull-Screen Layouts and Content Sharing
Host a Cisco Webex Meeting—Quick ReferenceNotes, Meeting Minutes, and Closed Captions—Quick Reference
Manage AudioConnect to AudioGet a Called at a Different NumberAdjust Your Microphone and Speaker VolumeMute or Unmute
Manage VideoStop and Start Your Video During a MeetingSwitch Cameras During a MeetingIncrease the Brightness and Contrast for Your VideoSelect Who You Want to Focus on in a MeetingSelect the Focus for the Main VideoSelect the Focus of the Thumbnail Video
Manage Your MeetingStart a Poll—WindowsStart a Poll—MacStart a Poll—Quick ReferenceRecord a MeetingAdmit Participants Waiting in Your Personal Room LobbyLock Your Personal Room Meeting
Share ContentShare Your ContentShare Multimedia Content in the Multimedia ViewerAllow Participants to Annotate Shared ContentDraw an AnnotationMove an Annotation
TroubleshootingRun a Problem Report in a Webex MeetingUse Health Checker