Making of Rings

16/12/2015

Starting with 4.5mm square 18ct

Yellow and White Gold

Rolling Gold to width and thickness

Softening gold for setting after rolling

Shaped to Diamond and 18ct Gold

soldering

White Gold Cap shaped ready to be

soldered

Look like it is meant to fit!!

Softening Gold for Shank

Pulling shank gold through Drawer

Plates to make round

Bending shank to correct size for finger

Fiberglass hammer to get shape

without marking gold

When cut to length soldering setting

to shank

Happy so far

Shaping the Diamond band

Ready to solder

Stamping 750 (18ct) and My Logo

Filing excess off setting to shape of

ring

We go through a series of files and

Emery paper ready to polish

Emerying inside

Polishing inside

Polishing outside

First Polish ready to set Diamonds.

The Band goes off to a setter

After seating the Diamond, the edges are pushed over the stone to hold it in

Ready for final cleanup and Polish

Voila!!!