Machine Safety Presentations

Safety Unit

Presentations

• Tool Safety

• Machine Safety

• Teaching yourselves and peers

Tricks and Tips

• Watch the “Power Point Basics video

• (embed)

Research

• Review the handouts• Diagram and Machine Safety

Diagram

• Use the diagram to photograph the machine parts

• Use the photos in your presentation• Label the parts appropriately

QuickTime™ and a decompressor

are needed to see this picture.

Presenting

• View Mr. H’s presentation

• Your presentation should include:1. Title2. Machine description3. Top 10 Safety Rules4. Top 10 Operational Rules

Paraphrasing

• Reword all information

• Include references

Table Saw

Mr. Heydens

Table Saws

• Rip, cross cut, bevel and cut angles

• Precise

Top 10 Safety Rules

1. 3”rule

2. Hands off saw

3. Align fence

QuickTime™ and a decompressor

are needed to see this picture.

Top 10 Safety Rules

4. Be aware

5. Use guard

6. Adjust when the machine is off

QuickTime™ and a decompressor

are needed to see this picture.

Top 10 Safety Rules

7. Saw must be off when clearing it

8. Do not over reach

9. Use a stop block when cross cutting

10. Raise blade 1/4” above stock

Operational Safety Rules

1. Operate with a positive and safe attitude (#1)

2. Disconnect power when not in use (#2)

3. Use the cross cut sled (#8)QuickTime™ and a

decompressorare needed to see this picture.

Operational Safety Rules

4. Use a stop block when cutting multiples (# 9)

5. Ensure no one is behind you (# 11)

6. Use a push stick when stock is within 4” of blade(#13)

Operational Safety Rules

7. Stand comfortably (#14)

8. Stand to the left of the blade (#15)

9. Make sure the blade has stopped turning (#16)

Table Saw

Partners

• Find who has the matching card

Grade 7 Topics

• Belt / Disc Sander• Scroll Saw• Drill Press

Grade 8 Topics

• Band saw• Scroll Saw• Router• Drill Press• Belt / Disc Sander

Grade 9 Topics

• Band saw• Scroll Saw• Router• Drill Press• Compound Miter Saw• Belt / Disc Sander