Post on 14-Apr-2017
HGM Micro Powder Mill (Full name is
HGM series three-ring & medium-speed
micro-powder mill) is designed basing on
our 24 years’ manufacturing experience,
absorbing the Swedish advanced
machine manufacturing techniques. It is
a new type of mill for making super fine
powder through more than 20 times of
test and improvement. It is the latest
type of product of micro-powder mill that
leads the world tide. It is the grinding
equipment used to process fine powder
and super-fine powder.
APPLICATIO
HGM SERIES MICRO POWDER MILL
Three-Ring & Medium-Speed MicroPowder Mill has high efficiency and low cost.Its capacity is raised by 40% compared with airflow mill and mix mill on thecondition that the materials, the drive and the fineness of the final powder arethe same. The life span of tear & wear parts is more than that of straight impactcrusher and turbine mill under the circumstance of same materials and finenessof the final powder. Usually, its life span is more than one year. There is no rollingbearing and screw in the grinding cavity, so as to avoid the damage to themachine caused by tear & wear of bearing and seals and the looseness of screws.The fineness of powder can reach ≦5μmwith d97 once.
FEATURE
1. classifier powder outlet2. classifier boby3 .classifier stand4. shell5. seat6. boaring bush7. main shsft8. classifier cloctromotor9. classifier shaft10. classifier impeller11. inlet mouth12. upper distributing plate13. ring14. roller15. turn plate16. lower distributing plate17. coupling to connect gearbox
MainMainMainMain bobybobybobyboby structurcstructurcstructurcstructurc skctchskctchskctchskctch
The motor drives the main shaft and every turnplate through the reducer.
The reducer drives dozens of rollers to rotate against race way of ring
through pin. Small material crushed by hammer crusher is transported
into hopper by elevator, and then vibrating feeder shall feed material to
the central part of upper turnplate evenly. The material falls to circle
under the centrifugal force and comes down to raceway of ring to be
crushed into powder. After grinded in the first race way, the material
goes to the second and third turnplate. The blower inhales the external
air into the mill and carries the powder after third turnplate into
powder-separator. Turbine in the separator makes the coarse powder
drop down and regrinded and the fine powder shall go into cyclone
powder collector together with air current and go down through
discharge valve as final product; at the same time, air current with a
little dust goes out through blower and muffler after purified by filter.
THE IMPORTANT PARTS:
WORKING PRINCIPLE
TableTableTableTable 1111
TableTableTableTable 2222
Notice:Notice:Notice:Notice: Any change of Three-Rings & Medium-Speed MicroPowder Mill technical data shall not be advised
additionally.
ModelModelModelModel HGM80HGM80HGM80HGM80 HGM100HGM100HGM100HGM100
Roller number 21 27
Ring Diameter (mm) Φ800 Φ1000
Ring number 1x3 1x3
Main unit speed(mm) 180-250 150-200
Max. feeding size(mm) 10 10
Final size (mesh) 325-2500 325-2500
Capacity (kg/h) 400-4500 900-6500
Overall dimension (m) 13.5×4×6.5 18x4.5x8.6
NameNameNameName ItemItemItemItem UnitUnitUnitUnitSpecificationsSpecificationsSpecificationsSpecifications &&&& TechnicalTechnicalTechnicalTechnical DataDataDataData
HGM80HGM80HGM80HGM80 HGM100HGM100HGM100HGM100
Motor for main frameModel Y2-250M-4 Y2-315M-6
Power kW 55 110
Motor for separatorModel Y2-180M-4 Y2-200M-4
Power kW 18.5 30
Motor for ElevatorModel Y100L-4 Y112M-4
Power kW 3 3
Motor for BlowerModel Y2-255M-2 Y2-280M-2
Power kW 45 75
Motor for Hammer CrusherModel PC400x300 PC600x400
Power Kw 11 18.5
Motor of Vibrating FeederModel GZ1F GZ1F
Power Kw 0.06 0.06
Motor of discharge valveModel ZJD200 ZJD200
Power Kw 0.75 0.75
Impulse bag filterModel DMC120 DMC184
Power 7.5
TECHNICALTECHNICALTECHNICALTECHNICAL SPECIFICATIONSSPECIFICATIONSSPECIFICATIONSSPECIFICATIONS
Copyright © 2000-2015 Liming Heavy Industry.
MMMMAINAINAINAIN STRUCTURESTRUCTURESTRUCTURESTRUCTURE ::::
Copyright © 2000-2015 Liming Heavy Industry.
1. Dust filter2. Noise-reducer3. Blower4. Final Power outlet5. Main Unit6. Reducer7. Hammer Crusher8. Bucket Elevator9. Hopper10. Fecder11. Classifier12 Powder Collector
SERVICELiming service centers span the globe and are conveniently located to deliver prompt
and complete service to keep your job moving forward. Our teams of technicians
offer years of experience and offer services ranging from routine maintenance and
accident repairs to customization and reconditioning.
We dispatch the experienced techncian to guide you installation and commissioning;
We dispatch the experienced technician to inspect and assess your machinery
condition; We offers efficient, cost-effective repair and rebuild services for you;
We offers technical support, to provide you with Process circuit evaluation.
Original spare parts is the heart of crushing & screening plant. Kefid supplies quality
original parts to protect your investment and our knowledgeable product specialists
help ensure you receive exactly what you need to get your equipment back on
the job.
TRAINNINGTRAINNINGTRAINNINGTRAINNING ANDANDANDAND EDUCATIONEDUCATIONEDUCATIONEDUCATION
Knowledge is power. Based in the
classroom, workshop, out in the
field or underground, we teach
both theoryand practice, infusing
the relevant precautions, techniques,
routines and remedies we have
devised to ensure maximum safety,
to save tproduction, reducing
downtime and overall, operating
more efficiently.
ABOUT USLiming Machinery Co., Ltd. is a leading and pioneering enterprise with the most
advanced international level in R&D, manufacturing and selling of large-scale
crushing & screening plants and industrial milling equipments.
Located in a historic city and transportation hub in central China-Shanghai,
covering 140 thousand square meters, Kefid has Shangjie and High-tech zone two
production bases. Shangjie Zone which covers 80,000 square meters has three
heavy-duty and modern integrated assembling workshops-- occupying 50,000
square meters; High-tech zone has 22 floors R&D Management laboratory building
with 26,000 square meters, comprehensive equipments exhibition hall with 5,100
square meters, heavy-duty and modern integrated assembling workshop with
10,000 square meters, and also has the industry's most advanced machining
workshop 20,000 square meters, and hundred sets of advanced large-scale
vertical lathe, fixed lathe, planner, boring lathe, grinder and milling machines
WORKSHOP
What’more,Liming Heavy Industry
Has three big producation plants
They are:plug welding workshop,
Machining workshop,fitting work-
Shop each of them occupies more
Than 80,000square.
More than 900 workmen are work-
Ing and manufacturing products
Which can ensure the quick supply-
Ing products of customerization.
Copyright © 2000-2015 Liming Heavy Industry.
LIMINGLIMINGLIMINGLIMINGHEAVYHEAVYHEAVYHEAVY INDUSTRYINDUSTRYINDUSTRYINDUSTRYIndustrial Grinding
India | Algeria | Australia | Afghanistan | Bangladesh | Botswana | New Caledonia
Dominican Republic | Dubai | Egypt | Ethiopia | Iran | Iraq | Kenya | Kosovo
Kuwait | Libya | Malawi | Malaysia | Maldives | Mauritius | Myanmar | Nepal
Nigeria | Oman | Pakistan | Russia | Srilanka | Sudan | Saudi Arabia | Senegal | Tahiti
Tanzania | Trinidad & Tobago | Tunisia | Uganda | Yemen | West Indies...
HEAD OFFICETel: 0086-371-86162511
Fax: 0086-371-67992699
Email: info@limingco.com
MSN: SalesCrusher@hotmail.com
Address: No.15, Dingxiangli Road, National HI-TECH Industry DEvelopment Zone, Zhengzhou,
China.
SHANGHAI BRANCHTel: 0086-21-33901608
Fax: 0086-21-58377628
Address: No.201-34, Huaxia 3rd Road, Pudong
New Area, Shanghai, China.
BEIJING BRANCHTel: 0086-10-64070219
Mobile:0086-13611001050
Address: No.88, Jianguo Road, Chaoyang
District, Beijing, China.
With Liming's policy of constant upgradation of products, specifications are subject to change without prior notice. Accessories shown are optional and not a part of standard supply.