Liming hgm micro powder mill-

Industrial Grinding

HGM Series Micro Powder MillMaximum Capacity :6500 (kg/h)

HGM Micro Powder Mill (Full name is

HGM series three-ring & medium-speed

micro-powder mill) is designed basing on

our 24 years’ manufacturing experience,

absorbing the Swedish advanced

machine manufacturing techniques. It is

a new type of mill for making super fine

powder through more than 20 times of

test and improvement. It is the latest

type of product of micro-powder mill that

leads the world tide. It is the grinding

equipment used to process fine powder

and super-fine powder.

APPLICATIO

HGM SERIES MICRO POWDER MILL

Three-Ring & Medium-Speed MicroPowder Mill has high efficiency and low cost.Its capacity is raised by 40% compared with airflow mill and mix mill on thecondition that the materials, the drive and the fineness of the final powder arethe same. The life span of tear & wear parts is more than that of straight impactcrusher and turbine mill under the circumstance of same materials and finenessof the final powder. Usually, its life span is more than one year. There is no rollingbearing and screw in the grinding cavity, so as to avoid the damage to themachine caused by tear & wear of bearing and seals and the looseness of screws.The fineness of powder can reach ≦5μmwith d97 once.

FEATURE

1. classifier powder outlet2. classifier boby3 .classifier stand4. shell5. seat6. boaring bush7. main shsft8. classifier cloctromotor9. classifier shaft10. classifier impeller11. inlet mouth12. upper distributing plate13. ring14. roller15. turn plate16. lower distributing plate17. coupling to connect gearbox

MainMainMainMain bobybobybobyboby structurcstructurcstructurcstructurc skctchskctchskctchskctch

The motor drives the main shaft and every turnplate through the reducer.

The reducer drives dozens of rollers to rotate against race way of ring

through pin. Small material crushed by hammer crusher is transported

into hopper by elevator, and then vibrating feeder shall feed material to

the central part of upper turnplate evenly. The material falls to circle

under the centrifugal force and comes down to raceway of ring to be

crushed into powder. After grinded in the first race way, the material

goes to the second and third turnplate. The blower inhales the external

air into the mill and carries the powder after third turnplate into

powder-separator. Turbine in the separator makes the coarse powder

drop down and regrinded and the fine powder shall go into cyclone

powder collector together with air current and go down through

discharge valve as final product; at the same time, air current with a

little dust goes out through blower and muffler after purified by filter.

THE IMPORTANT PARTS:

WORKING PRINCIPLE

TableTableTableTable 1111

TableTableTableTable 2222

Notice:Notice:Notice:Notice: Any change of Three-Rings & Medium-Speed MicroPowder Mill technical data shall not be advised

additionally.

ModelModelModelModel HGM80HGM80HGM80HGM80 HGM100HGM100HGM100HGM100

Roller number 21 27

Ring Diameter (mm) Φ800 Φ1000

Ring number 1x3 1x3

Main unit speed(mm) 180-250 150-200

Max. feeding size(mm) 10 10

Final size (mesh) 325-2500 325-2500

Capacity (kg/h) 400-4500 900-6500

Overall dimension (m) 13.5×4×6.5 18x4.5x8.6

NameNameNameName ItemItemItemItem UnitUnitUnitUnitSpecificationsSpecificationsSpecificationsSpecifications &&&& TechnicalTechnicalTechnicalTechnical DataDataDataData

HGM80HGM80HGM80HGM80 HGM100HGM100HGM100HGM100

Motor for main frameModel Y2-250M-4 Y2-315M-6

Power kW 55 110

Motor for separatorModel Y2-180M-4 Y2-200M-4

Power kW 18.5 30

Motor for ElevatorModel Y100L-4 Y112M-4

Power kW 3 3

Motor for BlowerModel Y2-255M-2 Y2-280M-2

Power kW 45 75

Motor for Hammer CrusherModel PC400x300 PC600x400

Power Kw 11 18.5

Motor of Vibrating FeederModel GZ1F GZ1F

Power Kw 0.06 0.06

Motor of discharge valveModel ZJD200 ZJD200

Power Kw 0.75 0.75

Impulse bag filterModel DMC120 DMC184

Power 7.5

TECHNICALTECHNICALTECHNICALTECHNICAL SPECIFICATIONSSPECIFICATIONSSPECIFICATIONSSPECIFICATIONS

Copyright © 2000-2015 Liming Heavy Industry.

MMMMAINAINAINAIN STRUCTURESTRUCTURESTRUCTURESTRUCTURE ::::


1. Dust filter2. Noise-reducer3. Blower4. Final Power outlet5. Main Unit6. Reducer7. Hammer Crusher8. Bucket Elevator9. Hopper10. Fecder11. Classifier12 Powder Collector

SERVICELiming service centers span the globe and are conveniently located to deliver prompt

and complete service to keep your job moving forward. Our teams of technicians

offer years of experience and offer services ranging from routine maintenance and

accident repairs to customization and reconditioning.

We dispatch the experienced techncian to guide you installation and commissioning;

We dispatch the experienced technician to inspect and assess your machinery

condition; We offers efficient, cost-effective repair and rebuild services for you;

We offers technical support, to provide you with Process circuit evaluation.

Original spare parts is the heart of crushing & screening plant. Kefid supplies quality

original parts to protect your investment and our knowledgeable product specialists

help ensure you receive exactly what you need to get your equipment back on

the job.

TRAINNINGTRAINNINGTRAINNINGTRAINNING ANDANDANDAND EDUCATIONEDUCATIONEDUCATIONEDUCATION

Knowledge is power. Based in the

classroom, workshop, out in the

field or underground, we teach

both theoryand practice, infusing

the relevant precautions, techniques,

routines and remedies we have

devised to ensure maximum safety,

to save tproduction, reducing

downtime and overall, operating

more efficiently.

ABOUT USLiming Machinery Co., Ltd. is a leading and pioneering enterprise with the most

advanced international level in R&D, manufacturing and selling of large-scale

crushing & screening plants and industrial milling equipments.

Located in a historic city and transportation hub in central China-Shanghai,

covering 140 thousand square meters, Kefid has Shangjie and High-tech zone two

production bases. Shangjie Zone which covers 80,000 square meters has three

heavy-duty and modern integrated assembling workshops-- occupying 50,000

square meters; High-tech zone has 22 floors R&D Management laboratory building

with 26,000 square meters, comprehensive equipments exhibition hall with 5,100

square meters, heavy-duty and modern integrated assembling workshop with

10,000 square meters, and also has the industry's most advanced machining

workshop 20,000 square meters, and hundred sets of advanced large-scale

vertical lathe, fixed lathe, planner, boring lathe, grinder and milling machines

WORKSHOP

What’more,Liming Heavy Industry

Has three big producation plants

They are:plug welding workshop,

Machining workshop,fitting work-

Shop each of them occupies more

Than 80,000square.

More than 900 workmen are work-

Ing and manufacturing products

Which can ensure the quick supply-

Ing products of customerization.

Liming hgm micro powder mill-

Devices & Hardware

Transcript of Liming hgm micro powder mill-