Post on 22-Jan-2018
IRY-PC ENGINEERING PVT. LTD.Enhance Efficiency
Company Mission and Vision
IRY-PC Engineering Pvt. Ltd. a group company of IRY engineering Pvt Ltd isone stop solution provider for all the Engineering manufacturing needs ofcustomers.
Our Mission is to exceed the expectations of the customer with ourtechnological skills & understanding of processes, innovative designs, highinternational quality manufacturing standards and delivering high qualityservices ensuring Long term relationship.
Our Vision is to be the leader in our Chosen Field of Operations throughregular developments, quality services and by ensuring total customersatisfaction.
An IRY Group Enterprise with diversified interests in
High End Electro‐Mechanical Engineering Solutions for General & Automobile Industries
Commercial Building Services
Water Engineering
IRY - PC
The issues surrounding PRODUCTIVITY are complex, urgent and interrelated:
• Output Vs Input Factors• Design & Ergonomics• Environmental issues & Water scarcity• Aging infrastructure• Energy consumption
We have the size, scope and focus to address them all.
Enhance your Efficiency: Our Tagline and Purpose
1
2
3 4
5
67
8
9
1. Raw Water Source2. Transport Water3. Treatment and Purification4. Transport Water5. Home/ Industrial use6. Transport Water7. Waste Water/ Industrial
Influent Treatment8. Recycle & Reuse9. Natural Body Discharge
Area of Operations
• Municipal Water & Sewage Treatment• Sewage Collection Network• Water Distribution Network• Civil Hydraulics & Structural Design• Industrial Water Treatment• High Purity Water Generation & Distribution System
( Pharma & Semiconductor)• Wastewater /Effluent Treatment• Electrical , Instrumentations & Automation Controls• HVAC• Firefighting Systems• Utility Piping• Process Piping
FOR
DETAILED DESIGN &
EXECUTION
As a
CONSULTANT. EXECUTING
AGENCY
&
SELECT COMPONENT
SUPPLIES
ULTRA FILTRATION
Affiliation
QUA Technologies
QUA Water Technologies
Ultrafiltration: Q-SEPFractional Electro deionization: FEDI
Advanced Membrane Products
WHY QUA?
Head quartered in The USA
Manufacturer of advanced membrane products for water, wastewater and water reuse applications
Extensive R&D activities for over a decade, resulted in a range of cutting edge membrane products
What is Ultrafiltration??
• Purification of surface water, groundwater and spring water to make drinking water and process water
• Treatment of waste water• Pretreatment in sea water desalination plants in
combination with reverse osmosis or thermal treatment
• Water for industrial use to close water cycles
Uses of Ultrafiltration
• Removal of germs, bacteria, viruses and all types of suspended solids
• The quality of the treated water remains the same regardless of the degree of contamination of the original water
• Simple and safe to operate and manage
Advantages of Ultrafiltration
Poly Ether Sulphone (PES)Inside-Out Flow
• NSF (National Sanitation Federation)1. For Drinking water2. For 6.2 log Bacteria rejection at 150 LMH Flux
Certifications
• Flux(LMH)- Filtrate flow rate through membrane• Flux X Area = Flow per membrane• Because of the patented technology, we offer
higher flux rates than our competition
Flux
Operational ParametersFiltrate flux range 50 to 150 l/m h (30 to 90 gfd)Maximum feed pressure 5.0 bar (70 psi)Trans-membrane pressure 0.3 to 1.4 bar (5 to 20 psi)pH range 2 to 12Typical instantaneous chlorine tolerance 100 to 200 ppmMaximum operating temperature 45°C (113°F)Typical feed turbidity 0.8 mm ID: 25 NTU
1.2 mm ID: 50 NTUBackwash flux range 150 to 300 l/m h (90 to 180 gfd)Backwash feed pressure 0.7 to 2.1 bar (10 to 30 psi)
Backwash frequency & duration Every 15 - 45 minutes for 30 - 60 seconds
Efficient backwash
More resistant to low and high pH
Ability to feed & backwash from top and bottom
Higher packing density
No dedicated CIP required
Lower cost module
Advantages PES I/O over PVDF O/I
2010 -
Ultra Filtration
2006 - 2009
1995 - 2005
RO FEDITM
Pretreatment 2 Pass RO EDI
Pretreatment RO Mixed Bed
up to 1980
Pretreatment Cation/Anion Mixed Bed
High purity water production over the years
Introduction to EDI
Advantages of EDI over Mixed Bed Technology
•Eliminates harsh treatment chemicalsGreen TechnologyBulk chemical storage not requiredSafety Considerations
•Eliminates need for regenerationContinuous operation; improved qualitySimple to operateRegeneration system not required
•Lower operating cost
•Modular equipment, scalable
•Smaller footprint, could be made mobile
MO
hm.c
m
Time
Continuous, Simple Operation
• Eliminates batch processing• Provides consistent product water quality on a continuous
basis• Operator Intervention is not required
Mixed-bed Batch Processing EDI Continuous Processing
18.2
MO
hm.c
m
Time
EDI delivers 16 to 18 Mohm.cm watercontinuously
• Reduced installation and commissioning time• No complex operating procedures
Advantages of EDI over Mixed Bed Technology
The Next Generation of EDI
• Fractional ElectrodeionizationProcess, May 24, 2005
US Patent #6896814 B2
• Method of preparing ion exchange media, Jan 16, 2007.
US Patent # 7163964 B2
FEDI – Fractional Electrodeionization
THANK YOU
IRY-PC Engineering Pvt. Ltd.1545, Sector 17C, Gurgaon
Haryana, India
Tel No.:+91 124 3354234
M. No: +91 9810839650Email: dinesh@iryengineering.comWebsite: www.iryengineering.com
OFFICES