材质: 105铜版纸 印刷: 单黑双面印刷 装订方式: 风琴折页 尺寸: 110*75mm

反面

05

2.Remove existing seat and lid .

3.Release the bolts on both side of the existing toilet seat.

seat

06

Warning! Please place this bidet attachment at room temperature anddo not storage it and its accessories in the freezing temperatureenvironment under 0 degree Celsius.

INTRODUCTION

Thank you for purchasing DALMO bidet attachment. Please read thesemanual carefully and keep it for future reference

INCLUDED PARTS

Cold water inlet Seat(seat hook)coupling hole

Water pressure control knob

Body Bidet wash

T adapter connector size7/8”

3.Metal Braided Hose (65cm/25.59 inch)

Wrench Plumbers Tape Screwdriver

Installation Tools You May Needed (not included)

1.Shut off water supply to toilet. Flush toilet to drain all water inside the tank.

Water tank

valve

INSTALLATION

DDB01S1/DDB01S2

Made in China

Company:Shenzhen Woyi Trading Co., Ltd.Web: www.dalmo.comFacebook: www.facebook.com/dalmo.usE-mail: support@dalmo.comADD:6ceng 603, Gongye Dasha, Xinwu Cun, Zhuguang Lu, Taoyuan Jiedao, Nanshan Qu,Shen Zhen, CHINA

1.Bidet

Bidet Attachment

User Manual

09

7.Cold Water Installation

Connect supplied T adapter to fill valve underneath of toilet water tank and

connect 65cm/25.59 inch metal braided hose between T adapter and cold water

inlet of bidet

T adapter connector

Water tank

65cm/25.59 inch metal braided hose

10 11 1312

Water valve

Water tank

Toilet Seat

Flexible hose

HELPFUL TIP:

Over tightening can cause damage

to the threads and result in water leakage.

Use only hand pressure first and check for any leakage.

Turn only less than quarter turn at a time making sure there is no leakage.

water tank

HOW TO USE Trouble ShootingIf the nozzles are clogged for some reason, please simply try to move them

up and down manually for few times.

Single nozzle system

Bidet wash

1.Knob 1: turn left to adjust water pressure, the more we turn it, the bigger

the water flow

2. knob 2: rotate according to indicator on the knob for function selection

Knob 1

Knob 2

T adapter connector

Function selection knob

rubber non-slipmat (2)

Bumper(3)Adjustablemounting brackets(2)

08

6.Install bidet on toilet

Place bidet on toilet, and adjust its position, ensure the nozzles on the middle

and won't stucked when spraying. And then adjust the mounting brackets angle,

make them fit for the toilet seat installation holes on the toilet, and then mount

toilet seat back and tighten Seat

07

Toilet Bowl

After the installation. If there’s gap between toilet seat and bowl like shows, let me help you!

1 Select appropriate placesfor us,and clean them

2 Tear off the film on my back 3 Stick me on the selectedplace, and push me.

Users Guide of Bumper

14

4.Install the rubber non-slip mats to the bottom of the the bidet

5 . place the adjustable mounting brackets into the bidet seat coupling holes