Post on 10-Sep-2020
GU A R D I A N GL A S S INTERIOR COLLECTION
■ DecoCristal® ■ SatinDeco
®
■ DiamondGuard® ■ ShowerGuard
®
■ LamiGlass® Deco ■ UltraMirror
®
www.guardian.com www.guardian-europe.com www.showerguardglass.com
AVAILABILITY
HANDLING
PROPERTIES
DESCRIPTION AND APPLICATIONS
GUARDIAN UL T R A M I R R O R
®
GUARDIAN UltraMirror® is a high quality mirror, distortion-free, offering durability and beautiful reflectance. The possibilities for decoration are unlimited: small and confined spaces become bigger, dark and dull rooms fill up with light. GUARDIAN UltraMirror is an ecologically friendly product exceeding all existing quality requirements set by the European mirror norm EN 1036.
■ Appearance
GUARDIAN UltraMirror is highly reflective and offers a true image reflectance with virtually no distortion.
■ Environmentally friendly
It respects the environment with a copper-free manufacturing process and a reduced lead content protective paint (<0.5%).
■ Quality
Copper-free manufacturing process enhances mirror protection against corrosion. It offers up to 3 times more protection than conventional mirror (in accordance with ISO 3770).
■ Heat resistance
It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.
■ Moisture resistance
If installation norm EN 1036 is respected, the mirror can be used in an environment where moisture is present (e.g. in a bath-room).
■ Scratch resistant
It is also available in DiamondGuard® version, in which glass side is more resistant to scratches than ordinary float glass.
■ Safety
GUARDIAN UltraMirror is available in two safety versions, with safety film and on LamiGlass® for a superior protection.
■ Stocking
As with float glass, GUARDIAN UltraMirror must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. As ordinary mirror, it must be stored vertically.
■ Processing
It can be cut on the glass side and used in different fabrication processes (drilling, grinding, etc.).
■ Installation
Installation must be performed following installation norm EN 1036. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request).
■ Cleaning
It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
Do not use any acid or alkali cleaners, the protective coating and the silver layer could be damaged.
The following sizes and thicknesses are available:
■ Sizes: 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions upon request);
■ Thicknesses: 3, 4, 5, 6 and 8mm (10mm is available upon request);
■ Two safety versions are available: GUARDIAN UltraMirror with safety film and GUARDIAN UltraMirror on LamiGlass.
Disclaimer: This information is intended to provide general information about GUARDIAN UltraMirror and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends
testing of the product before any use in an industrial process.
DESCRIPTION AND APPLICATIONS
PROPERTIES
HANDLING
AVAILABILITY
GUARDIAN UltraMirror® with safety film has been developed to provide increased safety in interior applications. In case of breakage, the glass remains fixed to a safety film, reducing the chance of injury. GUARDIAN UltraMirror with safety film is perfectly suited for bathroom mirrors, decorative walls, wardrobe door mirrors and furniture applications. This product can be applied in all interior decoration projects where improved safety standards are required (homes, offices, restaurants, hotels, stores, elevators, etc.).
■ Environmentally friendly
It respects the environment with a copper free manufacturing process and with a reduced lead content protective paint (<0.5%).
■ UV-sensitive
It is designed to be used for interior applications only.
■ Heat resistance
Can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.
■ Moisture resistance
If installation norm EN 1036 is followed, GUARDIAN UltraMirror with safety film can be used in an environment where moisture is present (e.g. in a bathroom).
■ Scratch resistant
It is also available in DiamondGuard® version, in which glass side is more resistant to scratches than ordinary float glass.
■ Stocking
As with typical mirror, GUARDIAN UltraMirror with safety film must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided.
■ Processing
Can be cut on the safety film and used in different fabrication processes (drilling, grinding, etc.).
■ Installation
Installation must be performed following installation norm EN 1036. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request).
■ Cleaning
It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
The following sizes and thicknesses are available:
■ Sizes: 2250 x 3210 ; 2550 x 3210 and 3210 x 6000mm (other dimensions upon request);
■ Thicknesses: 4mm and 6mm.
Disclaimer: This information is intended to provide general information about GUARDIAN UltraMirror with safety film and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always
recommends testing of the product before any use in an industrial process.
G u a r d i a n UL T R A M I R R O R
® WITH SAFETY FILM
■ Safety
GUARDIAN UltraMirror with safety film reduces the chance of injury and damage due to glass breakage by using a safety film that is designed to hold broken fragments together.
Certified to the safety norm EN12600, class 3 for 4mm and class 2 for 6mm.
■ Quality
Copper free manufacturing process enhances mirror protection against corrosion.
mirror
clear safety film
paint layer
AVAILABILITY
HANDLING
PROPERTIES
DESCRIPTION AND APPLICATIONS
GUARDIAN UL T R A M I R R O R
® ON L A M I G L A S S ®
GUARDIAN UltraMirror® on LamiGlass® has been developed by GUARDIAN to combine interior decoration and maximum safety. It can be used in many applications: display cases, decorative walls, ceiling or pillar covers, partitions, etc. This product is suitable for interior rooms where the highest safety standards are required, for public as private places (shopping centres, schools, swimming pools, fitness centres, hospitals, etc.).
■ Safety
GUARDIAN UltraMirror on LamiGlass offers increased protection against injury and damage in case of breakage. The product is manufactured with polyvinyl (PVB) interlayer that is designed to hold broken glass fragments together.
It is certified to the safety norm EN356, class P1A for 3.3.2 and P2A for 4.4.2.
■ Environmentally friendly
It respects the environment with a copper free manufacturing process.
■ Quality
Copper free manufacturing process enhances mirror protection against corrosion.
■ Heat resistance
It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.
■ Improved moisture resistance
If the edges are appropriately protected, it resists against humidity.
■ Scratch resistant
It is also available in DiamondGuard® version, in which glass side is more resistant to scratches than ordinary float glass.
■ Stocking
As with float glass, GUARDIAN UltraMirror on LamiGlass must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided.
■ Processing
It can be used in different fabrication processes (drilling, grinding, etc.).
■ Installation
It can be installed similar to standard glass with a neutral silicon (free of solvent) or a double-sided adhesive (a list of compatible products is available upon request).
■ Cleaning
It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
The following sizes and thicknesses are available:
■ Sizes: 2250 x 3210 and 2550 x 3210mm (other dimensions are available upon request);
■ Thicknesses: 3.3.2 (6,76mm) and 4.4.2 (8,76mm).
Disclaimer: This information is intended to provide general information about GUARDIAN UltraMirror on LamiGlass and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always
recommends testing of the product before any use in an industrial process.
mirror double PVB opal glass
AVAILABILITY
HANDLING
PROPERTIES
DESCRIPTION AND APPLICATIONS
GUARDIAN DIAMONDGUARD ®
GUARDIAN DiamondGuard® is the only glass in the market that provides permanent scratch-resistance. Thanks to an unique and proprietary protective coating, the glass surface maintains its elegance longer. The product is ideal for interior decoration including: wall panels, sliding doors, partitions, table tops, shelving, furniture, shop furniture, doors, etc.
■ Stocking
GUARDIAN DiamondGuard must not be stored outside. Storage should be in a dry and clean place, a suitable distance away from external doors and corrosive chemicals. Relative humidity in the warehouse should not exceed 70% and a minimum temperature of 15°C should be maintained in order to prevent condensation.
■ Processing
It can be used in different fabrication processes (drilling, grinding, etc.).
■ Maintenance
With its smooth surface GUARDIAN DiamondGuard is easy to clean. The protective coating is stable against attack from common acids and alkalis, it doesn’t require special cleaning product or coating replenishment.
■ Installation
Can be installed with neutral silicon (free of solvent) or double-sided adhesive (a list of compatible products is available upon request).
The following sizes and thicknesses are available:
■ Sizes: 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions are available upon request);
■ Thicknesses: 4, 5, 6, 8, 10, 12 and 15mm.
■ Scratch resistant
GUARDIAN DiamondGuard coating offers to the glass a smoother and harder surface, with most materials simply sliding over it. The glass surface resists scratching from every-day items such as keys, bracelets, laptops, handbags, buttons, as well as many other common objects.
■ Durability and quality
GUARDIAN DiamondGuard coating is not a removable plastic film, but a durable and permanent protective layer that is bonded to glass. GUARDIAN DiamondGuard works to retain the beauty of glass, resulting in products that last longer.
■ Appearance
Is available on other GUARDIAN products including: LamiGlass®, DecoCristal®, Ultra-Mirror® and low-iron glass.
■ Heat-resistance
Contact with a strong heat source must be avoided.
■ UV-sensitive
Is designed to be used for interior applications only.
Disclaimer: This information is intended to provide general information about GUARDIAN DiamondGuard and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always
recommends testing of the product before any use in an industrial process.
AVAILABILITY
HANDLING
PROPERTIES
DESCRIPTION AND APPLICATIONS
GUARDIAN SHOWERGUARD ®
GUARDIAN ShowerGuard® is the first and only shower glass that provides permanent protection against corrosion and discoloration. GUARDIAN has developed a patented technology that seals the glass surface against corrosion, creating an easy-to-clean surface that will maintain its original appearance for years to come.
■ Easier to clean
The surface of GUARDIAN ShowerGuard glass is treated with a patented ion-beam deposition process to seal the surface against attack from chemicals and shower contaminants, allowing your glass to remain smooth and easy to clean.
ShowerGuard doesn’t require special after-care products or coating replenishment. A soft cloth or a wet sponge is all you need for periodic maintenance.
■ Durability
Unlike spray-on or wipe-on treatments that eventually come off, the coating on GUARDIAN ShowerGuard glass is permanent. So the shower can keep its original beauty for years to come. GUARDIAN ShowerGuard is covered by a 10-year warranty*.
■ UV-sensitive
ShowerGuard is designed to be used for interior applications only.
* Details of the warranty on www.showerguardglass.com
■ Heat-resistance
Contact with a strong heat source must be avoided.
■ Smooth
The protective coating provides to the glass a coefficient of friction being less than half that of standard float glass. This results in a much smoother surface than ordinary glass.
■ Stocking
GUARDIAN ShowerGuard must not be stored outside. Storage should be in a dry and clean place, a suitable distance away from glass washers, external doors and corrosive chemicals. Relative humidity in the warehouse should not exceed 70% and a minimum temperature of 15°C should be maintained in order to prevent condensation. For more information please refer to the Fabricator User Guide (available upon request).
The following sizes and thicknesses are available:
■ Sizes: 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions are available upon request);
■ Thicknesses: 6, 8 and 10mm.
New uncoated glass
Unprotected shower Glass exposed to typical
Shower conditions
ShowerGuard Protected glass Exposed to typical Shower conditions
■ Processing
Can be used in most common fabrication processes. Should be processed on the coated surface.
For further information please use the Fabricatior User Guide.
Disclaimer: This information is intended to provide general information about GUARDIAN ShowerGuard and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always
recommends testing of the product before any use in an industrial process.
AVAILABILITY
HANDLING
PROPERTIES
DESCRIPTION AND APPLICATIONS
GUARDIAN DECOCRIS TAL
®
GUARDIAN DecoCristal® is a float glass that is lacquered with an opacified paint. It can be used in the widest range of interior decoration projects (e.g. commercial buildings, offices, hotels, homes, etc.) for applications such as partitions, sliding doors, kitchen furniture, tables, wardrobe doors, etc. GUARDIAN DecoCristal offers numerous possibilities (safety version, scratch resistance and personalised colours). Thanks to its optimal combination of colour and brightness, it provides modern design and beauty in any decoration project.
■ Specific colour
GUARDIAN DecoCristal can also be personalised in the colour of your choice.
■ SatinDeco® on DecoCristal
It is also available in a mat version, on a satinated glass, for a soft and elegant appearance.
■ UV-sensitive
It is designed to be used for interior applications only.
■ Heat resistance
It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.
■ Scratch resistant
It is available in DiamondGuard® version, in which the coated side is more resistant to scratches than ordinary float glass.
■ Safety
It is available with safety film.
■ Colours
These colours are indicative only, they don’t give an accurate reproduction of the DecoCristal range.
■ Stocking
As with typical float glass, GUARDIAN DecoCristal must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided.
■ Processing
It can be cut the same way as mirror on the glass side and used in different fabrication processes (hole drilling, grinding, etc.).
■ Installation
It cannot be installed on a humid wall. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). For further information please reference the Fabricator User Guide.
■ Cleaning
It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
The following sizes and thicknesses are available:
■ Sizes: 2550 x 3210 (2250 x 3210, 3210 x 6000mm and other dimensions are available upon request);
■ Thicknesses: 4 and 6mm (3, 8 and 10mm upon request).
Disclaimer: This information is intended to provide general information about GUARDIAN DecoCristal and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always
recommends testing of the product before any use in an industrial process.
Black White Swan White Ice White UltraWhite 3935/9005 1820/9003 9010 1240/9003 1820/9003 LI (Low Iron)
The Naturals
The Essentials
Fluo Green Red Fluo Orange Fushia Purple Violet Blue Blue Lagoon 3850 2085/3001 4115/2001 4006 1220/4007 Luminous 2080
4105/5002
The Brights
Silver Metal Grey 3250/9022 9006
Black Grey Shark Grey True Grey Brown Caramel Wood Brown Grey Beige 0659 1230 Bordeaux 1250 Brown 2180 2410 3004 1370
AVAILABILITY
HANDLING
PROPERTIES
DESCRIPTION AND APPLICATIONS
GUARDIAN DECOCRIS TAL
® WITH SAFETY FILM
GUARDIAN DecoCristal® with safety film is a float glass lacquered with an opacified paint that is also strengthened by a clear safety film. In case of breakage, the glass remains fixed to the safety film, reducing the chance of injury. GUARDIAN DecoCristal with safety film can be used in the widest range of interior decoration projects where improved safety standards are required (homes, offices, restaurants, etc.). Perfectly suited for decorative wall, wardrobe door and furniture application, it will provide an optimal combination of style and safety.
■ Quality
The safety film protects the paint layer from possible scratches.
■ UV-sensitive
It is designed to be used for interior applications only.
■ Heat resistance
It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.
■ Improved moisture resistance
The safety film offers an improved moisture resistance.
■ Scratch resistant
It is available in DiamondGuard® version, in which treated side is more resistant to scratches than ordinary float glass.
■ Safety
GUARDIAN DecoCristal with safety film reduces the chance of injury and damage due to glass breakage by using a safety film that is designed to hold broken fragments together.
Certified to the safety norm EN12600, class 3 for 4mm and class 2 for 6mm.
■ Stocking
As with typical float glass, GUARDIAN DecoCristal with safety film must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided.
■ Processing
It can be cut on the safety film and used in different fabrication processes (drilling, grinding, etc.).
■ Installation
A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). For further information please reference the Fabricatior User Guide.
■ Cleaning
It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
The following colours, sizes and thicknesses are available:
■ Colours: All the standard and custom colours;
■ Sizes: 2550 x 3210 (2250 x 3210, 3210 x 6000mm and other dimensions are available upon request);
■ Thicknesses: 4mm and 6mm (3, 8 and 10mm upon request).
Disclaimer: This information is intended to provide general information about GUARDIAN DecoCristal with safety film and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN
always recommends testing of the product before any use in an industrial process.
glass paint layer clear safety film
AVAILABILITY
HANDLING
PROPERTIES
DESCRIPTION AND APPLICATIONS
GUARDIAN L A M I GL A S S ® D E C O
GUARDIAN LamiGlass® Deco is a product composed of two sheets of float glass bonded by one or several coloured PVB interlayers. GUARDIAN LamiGlass Deco brings colours, light and safety in the decorative and architectural world. It can be used in many applications: windows, decorative wall, ceiling, pillar, stairs etc. This product is suitable for exterior and interior, for public and private places, where the highest safety standards are required (shopping centres, universities, swimming pools, fitness centres, hospitals, etc.).
■ Colours
There are 15 foundation colours, which can be combined (4 colours layers maximum) or used separately. Thus GUARDIAN is able to personalize GUARDIAN LamiGlass Deco in the colour of your choice, there are over 3.000 transparent, translucent or opaque colour options*.
These colours are indicative only, they don’t give an accurate reproduction of the LamiGlass Deco range.
■ Acoustic properties
This product can also be combined with GUARDIAN LamiGlass Acoustic. * Light coloured PVB as the yellow one have to be protected by another PVB, clear or coloured
■ Safety
GUARDIAN LamiGlass Deco offers increased protection against injuries and damages in case of breakage. It is manufactured with a highly resistant coloured PVB interlayer that is designed to hold broken glass fragments together.
The industrial procedure used to produce the PVB interlayer is subject to the strictest standards of quality control: EN ISO 9002.
■ Uses
Perfect for decorative uses both inside and outside.
■ Appearance
It is also available on UltraMirror®, SatinDeco®, DecoCristal® and low-iron glass.
■ Stocking
GUARDIAN LamiGlass Deco must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided.
■ Processing
It can be used in different fabrication processes (drilling, grinding, etc.).
■ Installation
It can be installed similar to standard glass with a neutral silicon (free of solvent) or a double-sided adhesive (a list of compatible products is available upon request).
■ Cleaning
It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.
The following sizes and thicknesses are available:
■ Sizes : 1800, 2000, 2250, 2400, x 3210 and 3210 x 6000 mm (other dimensions are available upon request);
■ Thicknesses : 3+3, 4+4, 5+5, 6+6, 8+8 and 10+10 (12+12 only in: 1800 x 3210 mm).
Disclaimer: This information is intended to provide general information about GUARDIAN LamiGlass Deco and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recom-
mends testing of the product before any use in an industrial process
coloured PVB interlayers glass glass
Coral Rose
Ref: 0001
Aquamarine
Ref: 0002
Smoke Grey
Ref: 0003
Sahara Sun
Ref: 0004
Ruby Red
Ref: 0005
Sapphire
Ref: 0006
Evening Shadow
Ref: 0007
Golden Light
Ref: 0008
Arctic Snow
Ref: 0009
Cool White
Ref: 000A
Deep Red
Ref: 000C
True Blue
Ref: 000D
Tangerine
Ref: 000E
Polar White
Ref: 000F
Absolute black
Ref: 000G
AVAILABILITY
HANDLING
PROPERTIES
DESCRIPTION AND APPLICATIONS
GUARDIAN SAT INDECO ®
GUARDIAN SatinDeco® is an acid-etched glass that offers an excellent surface finish, making it very easy to clean. Thanks to its elegant appearance and great versatility, this glass is ideal for a wide range of applications including: windows, doors, floors, homes, offices, hotels, public buildings, shops, etc. GUARDIAN SatinDeco has become a key product in modern day decoration creating a elegant, clear and bright environment.
■ Appearance and Quality
GUARDIAN SatinDeco has an excellent silky finish. It disperses the light and transforms the transparent float into a translucent glass.
■ Uses
Perfect for decorative applications indoor and outdoor.
■ Easy to clean
With its smooth surface SatinDeco is easy to clean and helps prevent finger prints.
■ Environment
GUARDIAN SatinDeco manufacturing line includes the most advanced technology to treat any waste product that is derived from the manufacturing process.
■ SatinDeco on DecoCristal®
Can also be lacquered with a coloured and opacified organic paint. Available in all the standard DecoCristal colours and even in the colour of your choice.
■ SatinDeco on LamiGlass®
Can be laminated with PVB available in acoustic version and in different colours.
■ Other combinations
GUARDIAN SatinDeco is also available on UltraMirror®, low-iron glass and in Double Side.
■ Stocking
GUARDIAN’s SatinDeco must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided.
■ Processing
Can be cut, bevel, curve and drill. The product can also be tempered (flat or curved), painted or printed, laminated, mirror-coated, etc.
■ Installation
Similar to standard glass, it can be installed with neutral silicon (free of solvent) or double-sided adhesive. Once installed, it does not require any special attention.
■ Cleaning
Can be easily washed using a clean cloth with a standard and non-abrasive glass cleaning product.
The following thicknesses and sizes are available:
■ Sizes: 1800 x 3210, 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions available upon request);
■ Thicknesses: 3, 4, 5, 6, 8, 10, 12 and 15mm (19mm is available upon request);
The thicknesses available for SatinDeco on DecoCristal: 3, 4, 6 and 8mm;
The compositions available for laminated SatinDeco: 3+3, 4+4, 5+5, 6+6, 8+8, 10+10, 12+12 and 15+15.
Disclaimer: This information is intended to provide general information about GUARDIAN SatinDeco and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always
recommends testing of the product before any use in an industrial process.
Products Colours Sizes
(mm x mm) Thicknesses
(mm)
Compatibility with other products
Other compositions can be considered on
demand
Certifications
DecoCristal®
Standard colours: Black, White, Swan White, Ice White, UltraWhite, Black Grey, Shark Grey, True Bordeaux, Grey Brown, Caramel Brown, Wood Brown, Grey Beige, Fluo Green, Red, Fluo Orange, Fushia, Purple Violet, Blue Luminous, Blue Lagoon, Metal Grey, Silver and custom colours
2550 x 3210 2250 x 3210 3210 x 6000 and other dimensions upon request
4 and 6 (3, 8 and 10 upon request)
DiamondGuard, ShowerGuard, SatinDeco, Low-iron glass, Safety film
DecoCristal® with safety film
All the standard colours and custom colours
Clear safety film
2550 x 3210 2250 x 3210 3210 x 6000 and other dimensions upon request
4 and 6
Other thicknesses upon request
DiamondGuard, ShowerGuard, SatinDeco, Low-iron glass
Safety norm EN 12600, class 3 for 4mm and class 2 for 6mm
DiamondGuard® Clear
2250 x 3210 2550 x 3210 3210 x 6000
Other dimensions upon request
4, 5, 6, 8, 10, 12 and 15
LamiGlass, DecoCristal, UltraMirrors, Low-iron glass
LamiGlass® Deco
Foundation colours: Coral Rose, Aquamarine, Smoke Grey, Sahara Sun, Ruby Red, Sapphire, Evening Shadow, Golden Light, Arctic Snow, Cool White, Deep Red, True Blue, Tangerine, Polar White, Absolute Black and personal combinations
1800 x 3210 2000 x 3210 2250 x 3210 2400 x 3210 3210 x 6000
Other dimensions upon request
3+3, 4+4, 5+5, 6+6, 8+8 and 10+10
(12+12 in sizes: 1800 x 3210mm)
LamiGlass Acoustic, DiamondGuard, ShowerGuard, UltraMirror, SatinDeco, Low-iron glass
Safety norm EN 356, class P1A for 33.2 and P2A for 44.2
SatinDeco®
On LamiGlass: Onix Black, Absolute Black, Polar White, Clear, Translucent, Grey, Bronze, Deep Bronze, Dark Brown, Blue, Saphire Blue, Tangerine, Deep red, Sahara Yellow, Green Mint, Green and personal combinations
On DecoCristal: Available in all the standard and custom colours
1800 x 3210 2250 x 3210 2550 x 3210 3210 x 6000
Other dimensions upon request
3, 4, 5, 6, 8, 10, 12 and 15; 19 upon request Compositions for laminated SatinDeco: 3+3, 4+4, 5+5, 6+6, 8+8, 10+10, 12+12 and 15+15
UltraMirrors, DecoCristal, Double Side, LamiGlass, Low-iron glass
ShowerGuard® Clear
2250 x 3210 2550 x 3210 3210 x 6000
Other dimensions upon request
6, 8 and 10
DecoCristal, LamiGlass, UltraMirrors, Low-iron glass
UltraMirror® Blue paint (backside)
2250 x 3210 2550 x 3210 3210 x 6000
Other dimensions upon request
3, 4, 5, 6 and 8 10 upon request
DiamondGuard, SatinDeco, LamiGlass, Safety film, Low-iron glass
European mirror norm EN 1036 ISO 3770
UltraMirror® with safety film
Blue paint (backside) Clear safety film
2250 x 3210 2550 x 3210 3210 x 6000
Other dimensions upon request
4 and 6
DiamondGuard, SatinDeco, ShowerGuard
Safety norm EN 12600, Class 3 for 4mm and Class 2 for 6mm
UltraMirror® on LamiGlass®
Double PVB opal (safety certified)
2250 x 3210 2550 x 3210
33.2 (6.76mm) 44.2 (8.76mm)
DiamondGuard, SatinDeco, ShowerGuard
Safety norm EN 356, Class P1A for 33.2 and P2A for 44.2
GUARDIAN GLASS - INTERIOR COLLECTION
Guardian Luxguard I Guardian Luxguard II
Route de Luxembourg ZI Wolser
L-4940 BASCHARAGE L-3452 DUDELANGE
Grand-Duché de Luxembourg Grand-Duché de Luxembourg
Sales Department:
Tel: +352 52 111 203
Fax: +352 51 08 05
Email: dudelangesales@guardian.com
© 2011 Guardian Industries Corp.