AVALONHI LO HIGH CHAIR

IMPORTANT:KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Series SY802INSTRUCTION BOOK

ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS.READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USEOF THIS HIGH CHAIR. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT ISESSENTIAL.

WARNINGS

02 www.babylove.com.auwww.babylove.com.au

WARNING: THE CHILD SHOULD BE SECURED IN THEHIGH CHAIR AT ALL TIMES BY THE HARNESS, EITHER IN THE RECLINING OR UPRIGHT POSITION. THE TRAY IS NOTDESIGNED TO HOLD THE CHILD IN THE CHAIR. IT ISRECOMMENDED THAT THE HIGH CHAIR BE USED IN THEUPRIGHT POSITION ONLY BY CHILDREN CAPABLE OF RELIABLYAND CONSISTENTLY SITTING UPRIGHT UNASSISTED.

WARNINGS: TO PREVENT SERIOUS INJURY OR DEATH:

• FOLLOW THE MANUFACTURER’S INSTRUCTIONS. • DO NOT LEAVE CHILDREN UNATTENDED.• THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED. - MOST INJURIES FROM THE HIGH CHAIR ARE CAUSED BY FALLS.• POSITION THE HIGH CHAIR AWAY FROM SOLID STRUCTURES AND BENCHES TO AVOID INJURIES CAUSED BY FALLS AND ACCESS TO DANGEROUS ITEMS.• Double check assembly before placing child into high chair.• The weight of the child using this product is not to exceed 15kg.• Always keep your child in view whilst using the high chair.• Always apply the brakes when not moving the high chair.• Do not allow children to stand on the seat.• Use on a flat , even and horizontal floor and never use near stairs.• Do not elevate the high chair on any structure or table.• Do not allow child to stand on the seat.

WARNINGS:

03www.babylove.com.auwww.babylove.com.au

WARNINGS

• Never carry the high chair with the child in it.• Do not use the high chair without the tray and always ensure the tray is secure on the arm rests. The tray is not designed to hold the child in the chair.• When making adjustments to the high chair, ensure that you and Your child’s body, fingers and toes are clear of any moving parts on the high chair, otherwise they may be injured.• Position the high chair away from furniture, walls, hot surfaces and liquids, window covering cords, electrical cords and position the high chair away from furniture when the chair is not being used at a table.

THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.

04 www.babylove.com.auwww.babylove.com.au

PARTS LIST

C 1 x Tray & Tray Insert D 1 x Seat Insert

A 1 x High Chair Frame & Seat B 1 x Footrest

E 4 x Castors

Rear Castors

Front Castors

Raised ribon metal pin

05www.babylove.com.auwww.babylove.com.au

ASSEMBLED HIGH CHAIR PARTS LIST

Main Tray

Second Tray

Footrest

FootrestAdjuster button

FoldingLever

RearCastors

FoldingLever

HeightAdjustment

Lever

Front Castors

Rear LowerLeg Moulding

Front LowerLeg Moulding

Seat

Harness

Seat Pad

Tray ArmRelease Button

06 www.babylove.com.auwww.babylove.com.au

1. TO ASSEMBLE THE HIGH CHAIRA To attach the footrest, push the footrest tube into the socket located on the front edge of the seat until you hear an audible ‘click’ which indicates the pin on the tube has locked into the socket.

click

B To attach the wheels, two of the wheel assemblies have a raised rib on the pin and are to be inserted into the rear wheel mouldings. Insert the pin of each wheel assembly into the corner of the leg mouldings and push in until you hear an audible ‘click’ which indicates they are locked in.

click

12

07www.babylove.com.auwww.babylove.com.au

2. TO FIT THE SEAT INSERT

A To fit the seat insert, place the insert on the high chair seat and thread the harness shoulder straps through the corresponding slots in the seat insert. Feed the crotch buckle through the lower slot in the seat insert. To remove the insert, perform the above actions in the reverse order.

IMPORTANT NOTE:ENSURE THAT THE SHOULDER STRAPS ARE FITTED THROUGH THE APPROPRIATE HARNESS SLOTS TO SUIT YOUR CHILD’S SEATEDSHOULDER HEIGHT.

08 www.babylove.com.auwww.babylove.com.au

3. TO APPLY THE BRAKES

WARNING: ALWAYS APPLY THE BRAKES EXCEPTWHEN MOVING THE HIGHCHAIR.

A Press the brake lever down on the wheel assemblies to lock the brakes.

B Push the brake lever up on the wheel assemblies to unlock the brakes.

Please Note: The brakes should always be applied to the wheels when a child is seated in the high chair and the wheels should only be unlockedwhen moving the high chair.

09www.babylove.com.auwww.babylove.com.au

11

2

4. TO SECURE YOUR CHILD IN THE HARNESS

WARNING: USE THE HARNESS AT ALL TIMES.

A A five point harness is provided to restrain your child.To secure your child in the harness please follow the steps belowcarefully.Push buckle (A) and (B) into the buckle housing (C) until the buckleprongs snap into position.Carefully adjust the harness by pulling the slider (D) until the desired fitis achieved in the lap, shoulder and crotch straps.Always adjust the harness when changing the seating position of thechild.To remove the child, release the buckle by squeezing the top andbottom prongs, remove the shoulder straps and lift the child out of thehigh chair.

10 www.babylove.com.auwww.babylove.com.au

B The highchair seat has 3 harness slots at different heights to accommodate the child. The shoulder straps must be positioned near the child’s shoulders. To change the shoulder harness height, unclip the shoulder harness straps from the waist harness straps and push the shoulder harness tongue out of the current harness slot and through the back of the seat pad and then pull the shoulder harness buckle tongue through the desired slot. Clip the shoulder harness straps and waist straps back together.

4. TO SECURE YOUR CHILD IN THE HARNESS

11www.babylove.com.auwww.babylove.com.au

A Ensure both side arms are lowered and locked into place by pressing each RED release button in on both sides (one at a time) as you lower the arms. You hear an audible ‘click’ which indicates the side arms are locked in.

WARNING: THE TRAY IS NOT DESIGNED TO HOLD THE CHILD IN THE HIGHCHAIR. THE CHILD IS TO BE SECUREDBY THE SAFETY HARNESS AT ALL TIMES WHILE IN THEHIGHCHAIR.

CAUTION: Ensure the child’s hands are free from moving parts whenthe tray is being attached or removed to avoid pinching orentrapment. Before using the tray, check it is securely locked onto thearm rests by pulling on the tray.

5. TO ATTACH AND USE THE TRAY

click

12 www.babylove.com.auwww.babylove.com.au

B Pull the RED release latch forward located under the front edge of the tray. Align both tray slots with the side arms and slide the tray back onto the arms to the desired position and release the tray latch ensuring it has locked into position. The position of the tray can be adjusted by pulling the release latch forward and sliding the tray to the desired position.

C The tray features a removable second tray for convenient cleaning. Remove by releasing both tabs on the left and right sides of the tray.

5. TO ATTACH AND USE THE TRAY

Second Tray tab

1

2

13www.babylove.com.auwww.babylove.com.au

D To remove the main tray, pull the RED release latch forward and pull the tray towards you to remove from the side arms.

E The tray can be folded up whilst attached to the side arms. Press the RED release button in on each side arm and push the tray upwards. To fold the tray down refer to Step 5A.

5. TO ATTACH AND USE THE TRAY

1

2

F When the tray is not in use you can store the tray by sliding it onto the pegs located on the rear legs.

5. TO ATTACH AND USE THE TRAY

14 www.babylove.com.auwww.babylove.com.au

A To adjust the height of the footrest, press the RED lever in located under the footrest and slide the footrest up or down the metal tube to the desired position.

6. TO ADJUST THE FOOTREST

12

15www.babylove.com.auwww.babylove.com.au

ALWAYS REMOVE YOUR CHILD FROM THE HIGH CHAIR BEFOREADJUSTING THE HEIGHT OF THE HIGH CHAIR.

A Remove the child and tray from the high chair.

B There are five adjustable height positions. Stand at the front of the high chair and press in and hold the height adjustment levers on both sides and push the chair up or down to the desired height and then release the levers. You should hear an audible ‘click’ when the seat assembly is locked into place

WARNING: DO NOT ADJUST WITH THE CHILD IN THECHAIR.

IMPORTANT NOTE:

7. TO ADJUST THE HEIGHT OF THE HIGH CHAIR

click

1

2

16 www.babylove.com.auwww.babylove.com.au

A There are three recline positions. Lift and hold the recline latch located on the back of the seat and tilt the seat forwards or backwards to the desired position.

WARNING: DO NOT ADJUST WITH THE CHILD INTHE CHAIR.

IMPORTANT NOTE:ALWAYS REMOVE YOUR CHILD FROM THE HIGH CHAIR BEFORERECLINING THE SEAT ASSEMBLY.

8. TO ADJUST THE BACK REST

17www.babylove.com.auwww.babylove.com.au

8. TO FOLD/UNFOLD THE HIGH CHAIR

A Remove the child and tray from the high chair. Raise the side arms by pressing in the RED release button in on each side and push the arm upwards.

B Stand behind the chair and press the RED folding levers in and slide them up until they lock into position. Attach the tray to the rear legs as shown in Step 5F.

WARNING: DO NOT ADJUST WITH THE CHILD INTHE CHAIR.

11

2

18 www.babylove.com.auwww.babylove.com.au

8. TO FOLD/UNFOLD THE HIGH CHAIRC Stand behind the chair and press the RED folding levers in and slide them down until they lock into position.

D Lower the side arms (Refer to Step 5A).

E Attach the tray to the side arms (Refer to Step 5B).

2

1

CAUTION: Always store the high chair so it cannot be pulled or fall onchildren.

9. TO USE THE HIGH CHAIR

19www.babylove.com.auwww.babylove.com.au

• Place the high chair on a horizontal, flat and even floor ensuring all wheels are in contact with the floor.

• The high chair must not be placed on a table or similar surface to elevate the child.

• The highchair is fitted with brakes on all castors. Ensure the brakes are applied when the child is in the high chair and only release the brakes to move the high chair.

• If pushing the high chair on carpet, be careful that the high chair is not pushed over as the castors may not roll easily on the carpet.

• Position the high chair away from potential hazards and other furniture or structures that the child may be able to grasp or push.

• Keep away from walls, kitchen benches, hot surfaces, hot liquids and electrical cords.

20 www.babylove.com.auwww.babylove.com.au

• To prolong the life of your high chair keep it clean and do not leave it in the direct sunlight for extended periods of time.

• Removable fabric covers and trims may be cleaned using warm water with household soap or mild detergent. Allow it to dry fully, preferably away from the direct sunlight. • Non removable fabric covers and trims may be spot cleaned using a damp sponge with soap or a mild detergent. Allow it to dry completely before folding or storing it away.

• In some climates the covers and trims may be affected by mould and mildew. To help prevent this occurring, do not fold or store the product if it is damp or wet. Always store the product in a well ventilated area.

• To maintain the safety of your nursery product, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and accessories approved by Steelcraft.

• Always check parts regularly for tightness of screws, nuts and other fasteners - tighten if required.

• If the high chair is not working correctly stop using the high chair and seek repair.

THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.

CARE AND MAINTENANCE

NOTES

21www.babylove.com.auwww.babylove.com.au

Customer Service Ph: 1300 131 477 Email: info@babylove.com.au

Distributed by:Nursery Elegance Pty. Ltd.

ACN: 122 443 3876 Thorpe Street,

Sunshine, Victoria, 3020, Australia

Due to our continuing program of development, Nursery Elegancereserves the right to alter the specifications, colour or design without any

further notice.

The Babylove trademark is the property of Nursery Elegance Pty. Ltd.

Due to the variations in the style and design of our products theillustrations used in this instruction book are generic.

This product is designed to comply with Australian Standard AS4684-2009.

2015 Copyright Nursery Elegance Pty. Ltd. Australia

Art No. 4800341www.babylove.com.auwww.babylove.com.au22