Post on 17-Oct-2020
GT
C I/
II (0
6992
05-6
-7-8
)06
6412
1
User Manual
Gebruikshandleiding
EN
NL
2
Contents
1 Entrance to the home menu................................................................................. 32 Automatic Manual setting.................................................................................... 32.1 Fan level................................................................................................................................................ 32.2 Heat level............................................................................................................................................. 33 Automatic Frost Protect (AS).............................................................................. 43.1 Turning the Frost Protect (AS) on................................................................................................. 43.2 Frost Protect (AS) Set the target temperature........................................................................... 44 Automatic Room Temp (RT)................................................................................54.1 Turning Room Temp (RT) on............................................................................................................54.2 Setting the target temperature for room Temp (RT)..................................................................55 Automatic Door Switch (TK)..............................................................................65.1 Turning the Door Switch (TK) on.................................................................................................65.2 Door Switch (TK) fan level Setting..................................................................................................65.3 Door Switch (TK) Heat Level setting.............................................................................................75.4 Door Switch (TK) with Overtime setting......................................................................................76 Automatic Blow Temp (AT)..................................................................................86.1 Turning Blow Temp (AT) on..............................................................................................................86.2 Setting the target temperature for Blow Temp (AT)..................................................................86.3 Blow out temp (AT) fan level Setting..............................................................................................97 Timer..................................................................................................................98 Combination of AS, RT, TK and AT automatic .............................................109 Settings.............................................................................................................109.1 Language.............................................................................................................................................109.2 Runtime Filter.....................................................................................................................................119.3 Screen..................................................................................................................................................119.3.1 Display Brightness.............................................................................................................................119.3.2 Rotate the screen............................................................................................................................119.3.3 Screen lock.........................................................................................................................................129.4 Date/Time....................................................................................................................129.5 Overtime.............................................................................................................................129.6 Factory Setting...................................................................................................................................139.7 Memory....................................................................................................................1310 Screen saver..........................................................................................................1311 Error messages.....................................................................................................1411.1 COM Error.........................................................................................................................................1411.2 Frost alarm (optional)......................................................................................................................1411.3 No enabled.........................................................................................................................................1411.4 Filter cleaning.....................................................................................................................................1411.5 Sensor Error.......................................................................................................................................1511.6 Motor Error........................................................................................................................................1512 Help.........................................................................................................1513 Circuit diagram (PCB EC) GTC I.......................................................................1614 Circuit diagram (PCB AC) GTC I.......................................................................1715 Circuit diagram (PCB EC) GTC II......................................................................1816 Circuit diagram (PCB AC) GTC II......................................................................19
EN
3
1 Entrace to the home menu
When the power supply is switched on, the company logo appears for about 5 sec. After that the start screen appears.
2 Automatic Manual setting
2.1 Fan level
When pressing on "Fan level", the display changes and you can adjust the fan level from 0-5 with the arrows.
When pressing on "% representation", you can change the fan level in percent.
With pressing on "Home" you will get to the Home screen.
2.2 Heat level
With pressing on "Heat level", the display changes and you can turn on the heating level 1 with the arrows.
With pressing on "Home" you will get to the Home screen.
On the home screen, the preselected heat level and fan level will be displayed in blue.
Levels which are in operation are displayed in black.
3 *GTC II
1. Entrance to the home menu
When the power supply is switched on, appears
the company logo for about 5 sec.
After that the start screen appears.
2. Automatic Manual setting 2.1 Fan level
With pressing on the fan level the display changes and you can adjust
the fan level 0 - 5 with the arrows.
With pressing on % representation then you can change the fan level in percent.
With pressing on Home you will get to the Home screen.
2.2 Heat level
With pressing on heat level, the display changes and you can turn on the heating level 1 with the arrows.
With pressing on Home you will get to the Home screen.
On the home screen, appears the preselected heat level and fan level will be displayed in blue.
Levels which are in operation are displayed in black.
4
4 *GTC II
3. Automatic Frost Protect (AS) With the Frost Protect, it prevents the room from cooling. When the tempera-ture drops below the preselected cooling protection temperature, the first hea-ting level and fan level are then switched on.
3.1 Turning the Frost Protect on (AS) With pressing on automatic the display will changes.
Press Frost Protect and the AS will switch on.
On the automatic screen you can see that the Frost Protect is on.
With pressing on Home you will get to the Home screen.
3.2 Frost Protect (AS) Set the target temperature After pressing the Frost Protect you can preselect the desired temperature with the arrows.
with pressing on Home you will get to the Home screen.
On the start screen you can see the selected Frost Protect temperature.
Frost Protect has priority even if the system is in standby mode.
3 Automatic Frost Protect (AS)
With the Frost Protect, it prevents the room from cooling. When the temperature drops below the preselected cooling protection temperature, the first heating level and fan level are then switched on.
3.1 Turning the Frost Protect on (AS)
With pressing on "Automatics" the display will change.
Press "Frost Protect" and the AS will switch on.
On the automatics screen you can see that the Frost Protect is on.
With pressing on "Home" you will get to the Home screen.
3.2 Frost Protect (AS) Set the target temperature
After pressing the Frost Protect you can preselect the desired temperature with the arrow.
With pressing on "Home" you will get to the Home screen.
On the home screen you can see the selected Frost Protect temperature.
Frost Protect has priority even if the system is in standby mode.
EN
5
5 *GTC II
Target temperature value
4. Automatic Room Temp (RT) With the RT automatic, the selection of the fan speed depends on the Target Temperatur.
The greater the difference between the selected Target temperature and the actual room temperature, the greater the fan speed. (each 1 K = 1 level).
4.1 Turning Room Temp (RT) on
By pressing on automatic the display changes and you can switch the Room Temp automatic on.
On the automatic screen you can see that the "RT" room temperature is on.
With Home you get to the start screen.
4.2 Setting the target temperature for Room Temp (RT)
The temperature sensor is located in the control panel.
Optionally a sensor can be connected to the board.
this sensor has priority.
With pressing on room Temp the display changes and you can presel-ect the room temperature.
Use the arrows to select the desired Target room temperature.
With pressing on Home you will get to the Home screen.
current state temperature value
DT Fan Level Heat
0 0 ON
1 K 1 ON
2 K 2 ON
3 K 3 ON
4 K 4 ON
5 k 5 ON
4 Automatic Room Temp (RT)
With the RT Automatics, the selection of the fan speed depends on the Target Temperatur.The greater the difference between the selected Target temperature and the actual room temperature, the greater the fan speed (each 1 K = 1 level).
4.1 Turning Room Temp (RT) on
By pressing on "Automatics" the display changes and you can switch the Room Temp automatic on.
ΔT Fan level Heat
0 0 ON
1K 1 ON
2K 2 ON
3K 3 ON
4K 4 ON
5K 5 ON
On the Automatics screen you can see that the "RT" room temperature is on.With pressing on "Home" you will get to the Home screen.
4.2 Setting the target temperature for Room Temp
The temperature sensor is located in the control panel. Optionally a sensor can be connected to the board, this sensor has priority.When pressing on "Room Temp" the display changes and you can preselect the room temperature.Use the arrows to select the desired room temperature. With pressing on "Home" you will get to the Home screen.
6
6 *GTC II
5. Automatic Door Switch (TK)
With the TK automatic, the system is switched on after preselection of the fan speed and operation of the door contact switch.
5.1 Turning the Door Switch (TK) on
With pressing on automatic the display changes and you can switch on the TK automatic.
On the automatic screen you can see that the TK "Door Switch" is on.
With pressing on Home you will get to the Home screen.
5.2 Door Switch (TK) fan level Setting
With pressing on the fan level, the display changes and you can preselect the level of the fan with the arrows in 5 steps.
Levels which are in operation are displayed in black.
With pressing on Home you will get to the Home screen.
5 Automatic Door Swith (TK)
With the TK Automatics, the system is switched on after preselection of the fan speed and operation of the door contact switch.
5.1 Turning the Door Switch (TK) on
With pressing on "Automatics" the display changes and you can switch on the TK automatic.
On the automatics screen you can see that the TK "Door Switch" is on.
With pressing on "Home" you will get to the Home screen.
5.2 Door Switch (TK) fan level Setting
With pressing on the fan level, the display changes and you can preselect the level of the fan with the arrows in 5 steps.
Levels which are in operation are displayed in black.
With pressing on "Home" you will get to the Home screen.
EN
7
7 *GTC II
5.3 Door Switch (TK) Heat Level setting With pressing on the heat level, the display changes and you can turn on the heat level with the arrows.
With pressing on Home you will get to the Home screen.
5.4 Door Switch (TK) with Overtime setting With pressing on gear (settings) the display changes and you can change the Overrun time.
This ensures that the system remains switched on even after closing the door for up to 300 seconds. A repeated opening of the door leads to a restart of the overrun time.
Press on Overtime and you can set a desired overrun time using the ar-rows.
Confirm the setting with OK.
With pressing on Home you will get to the Home screen.
5.3 Door Switch (TK) Heat Level setting
With pressing on "Heat Level", the display changes and you can turn on the heat level with the arrows.
When pressing on "Home" you will return to the home screen.
5.4 Door Switch (TK) with Overtime setting
When pressing on the gear (settings) the display changes and you can change the Overrun time.
This ensures that the system remains switched on, even after closing the door for up to 300 seconds. A repeated opening of the door leads to a restart of the overrun time.
Press on Overtime and you can set a desired overrun time using the arrows.
Confirm the setting with OK.
With pressing on "Home" you will get to the Home screen.
8
8 *GTC II
6. Automatic Blow Temp (AT)* With the AT automatic the regulation of the blow-out temperature is carried out by an electronic control valve which is located in the water circuit.
The fan level remains constant, to achieve an optimal shielding by the door air curtain.
6.1 Turning Blow Temp (AT) on* With pressing on automatic the display changes and you can switch the blow Temp automatic on.
On the automatic screen you can see that the AT "blow Temp" is active.
With pressing on Home you will get to the Home screen.
6.2 Setting the target temperature for Blow Temp (AT)*
With pressing on blow-out temperature the display changes and you can preselect the blow-out temperature.
Use the arrows to select the desired outlet temperature.
With pressing on Home you will get to the Home screen.
current state
temperature value
Target temperature value
6 Automatic Blow Temp (AT)*
With the AT automatic the regulation of the blow-out temperature is carried out by an electronic control valve which is located in the water circuit.The fan level remains constant, to achieve an optimal shielding by the door air curtain.
6.1 Turning Blow Temp (AT) on*
With pressing on "Automatics", the display changes and you can switch on the Blow Temp automatics.
On the automatic screen you can see that the AT "Blow Temp" is active.
With pressing on "Home" you will get to the Home screen.
6.2 Setting the target temperature for Blow Temp (AT)*
When pressing on "Blow-out Temp", the display changes and you can preselect the blow-out temperature.
Use the arrows to select the desired outlet temperature.
With pressing on "Home" you will get to the Home screen.
* Only for GTC II
EN
9
9 *GTC II
6.3 Blow out temp (AT) fan level Setting*
With pressing on the fan speed the display changes and you can select the fan level 0 - 5 with the arrows.
With pressing on Home you will get to the Home screen.
7. Timer* With the weekly timer, there is the possibility
To program 12 ON and OFF switching times.
Active time is displayed in green and inactive time is displayed in red.
With pressing on the timer, the display changes and you can switch on the timer.
With pressing on New the display changes and you can
Program the Timer.
Use the arrows to set the time and day.
Press Save.
With the arrow you can set another switching time.
With pressing on Home you will get to the Home screen.
6.3 Blow out temp (AT) fan level Setting*
With pressing on "Fan Level" the display changes and you can select the fan level 0 - 5 with the arrows.
With pressing on "Home" you will get to the Home screen.
7 Timer*
With the weekly timer, there is the possibilityTo program 12 ON and OFF switching times.Active time is displayed in green and inactive time is displayed in red.When pressing on "Timer", the display changes and you can switch on the timer.With pressing on "New" the display changes and you can Program the Timer.
Use the arrows to set the time and day. Press Save.
With the arrow you can set another switching time.
With pressing on "Home" you will return to the home screen.
* Only for GTC II
10
10 *GTC II
8. Combination of AS, RT, TK and AT* automatic All automatic programs can be combined.
The description of the setting is made in points 3. 4. and 5.
Note 1:
When AT (blow Temp) and RT (Room Temp) are combined then in this case AT (blow Temp) and RT (Room Temp) have the same priori-ty.
When the door is open, the outlet temperature is regulated with the preselected fan level.
Note 2 :
When AT (blow Temp) and TK (Door Switch) are combined then-When the door is open, the outlet temperature is regulated with the preselected fan level.
Note 3 :
RT (Room Temp) has priority when combining RT (Room Temp) and TK (Door Switch) together.
Note 4:
When AT (blow-out temperature) and RT (room temperature) are combined,the heating will switch off as soon as one of the target tem-peratures is reached.
9. Settings With pressing on gear (settings), the display changes and you can make various settings.
7.1 Language
7.2 Runtime Filter
7.3 Screen
7.4 Date / Time
7.5 Overtime
7.6 Factory Setting
7.7 Memory
9.1 Language With pressing on Language the display changes and you can select a desired language.
The following languages are available:
Nederlands - Francais - English - Deutsch - Italiano - Polski
8 Combination of AS, RT, TK and AT* automatic
All automatic programs can be combined.The description of the setting is made in points 3, 4, and 5.
Note 1:When AT (blow Temp) and RT (Room Temp) are combined, then, in this case, AT (blow Temp) and RT (Room Temp) have the same priority.When the door is open, the outlet temperature is regulated with the preselected fan level.Note 2:When AT (blow Temp) and TK (Door Switch) are combined then, when the door is open, the outlet temperature is regulated with the preselected fan level.Note 3:RT (Room Temp) has priority when combining RT (Room Temp) and TK (Door Switch) together.Note 4:When AT (blow-out temperature) and RT (room temperature) are combined, the heating will switch off as soon as one of the target temperatures is reached.
9 Settings
With pressing on the gear (settings), the display changes and you can make various settings.
9.1 LanguageWith pressing on "Language" the display changes and you can select a desired language.The following languages are available:Nederlands - Francais - English - Deutsch - Italiano - Polski
* Only for GTC II
EN
11
11 *GTC II
9.2 Runtime Filter If a filter time is preselected, a note appears after the time expires. This should make you aware of an early cleaning of the suction filter.
Select the desired filter time with the arrows and confirm with Save.
The filter time is selectable between 0h to 999h.
9.3 Screen 9.3.1 Display Brightness With pressing on screen the display changes.
Then press om Display brightness, the display changes again.
Use the arrows to select the desired display brightness
With pressing on Home you will get to the Home screen.
9.3.2 Rotate the screen With pressing on screen the display changes .
Then press on Rotate to Rotate the display in clockwise direction.
9.1 Runtime Filter
If a filter time is preselected, a note appears after the time expires. This should make you aware of an early cleaning of the suction filter.Select the desired filter time with the arrows and confirm with Save.The filter time is selectable between 0h to 999h.
9.3 Screen
9.3.1 Display BrightnessWith pressing on "Screen" the display changes.Then press om "Display brightness", the display changes again.Use the arrows to select the desired display brightness.With pressing on "Home" you will return to the home screen.
9.3.2 Rotate the screenWith pressing on "Screen" the display changes.Then press on "Rotate" to rotate the display in clockwise direction.
12
12 *GTC II
9.3.3 Screen lock With pressing on screen the display changes.
Then press on lock.
To unlock press the big company logo and then press the small logo 3 times.
9.4 Date/Time With pressing on Date / Time changes the display.
Use the arrows to set the desired date and time.
Confirm with OK.
9.5 Overtime See under point 5.4
9.3.3 Screen lockWith pressing on "Screen" the display changes.
Then press on lock.
To unlock, press the big company logo and then press the small logo 3 times.
9.4 Date/TimeWith pressing on "Date / Time", the display changes.Use the arrows to set the desired date and time.Confirm with OK.
9.5 OvertimeSee under point 5.4
EN
13
13 *GTC II
9.6 Factory Setting It will RESET the controller to the factory settings.
All data will be deleted and reset to factory default values.
With pressing on the factory setting the display will change.
Confirm with OK.
9.7 Memory The GTC has a memory function. After a power failure, the unit will re-vert to the previously set values. This function can be switched off by pressing on Memory.
10. Screensaver If the GTC is not operated for about 5 minutes, The screen saver will be acti-vated (screen is dimmed).
Activation takes place by pressing the logo.
9.6 Factory SettingThis setting will RESET the controller to the factory settings.All data will be deleted and reset to factory default values.With pressing on "Factory settings" the display will change.Confirm with OK.
9.7 MemoryThe GTC has a memory function. After a power failure, the unit will revert to the previously set values. This function can be switched off by pressing on "Memory".
10 ScreensaverIf the GTC is not operated for about 5 minutes, the screen saver will be activated (screen is dimmed). Activation takes place by pressing the logo.
14
14 *GTC II
11. Error messages 11.1 COM Error There is a communication error between the individual components of the controller. (Control panel, data line and control boards)
COM 0 = Error between Control panel and control board
COM 1 till 9 = Error between MASTER board and SLAVE board
With the GTC control it is possible to operate up to 10 door air curtains with one control panel. For this purpose, each control board is provided with a coding switch. The coding takes place accordingly:
MASTER = 0
SLAVE = 1 - 9
A RESET is performed by turning off and on the Power supply.
It is essential to provide the SLAVE systems with power first!
11.2 Frost alarm (optional) When the intake temperature falls below approx. 7 ° C, the fans are swit-ched off and the magnetic valve will be opened.
Reset message
If the risk of freezing the heating register is eliminated, the message will automatically be deleted and the door air curtain system resumes normal operation.
This function has priority!
11.3 No enabled The system can not be put into operation.
Reset message:
The building management system must release the system to enable it.
11.4 Filter cleaning After expiry of the set filter time, (see point 7.2), it is essential that the filter and the intake grille is cleaned. The filter can be vacuumed with a vacuum cleaner.
Reset message:
With pressing on Clean filter the display changes and then the message will disappear.
11 Error messages
11.1 COM ErrorThere is a communication error between the individual components of the controller (Control panel, data line and control boards).COM 0 = Error between Control panel and control board.COM 1 till 9 = Error between MASTER board and SLAVE board.With the GTC control it is possible to operate up to 10 door air curtains with one control panel. For this purpose, each control board is provided with a coding switch. The coding takes place accordingly:MASTER = 0SLAVE = 1 - 9A RESET is performed by turning off and on the Power supply. It is essential to provide the SLAVE systems with power first!
11.2 Frost alarm (optional)When the intake temperature falls below approx. 7 °C, the fans are switched off and the magnetic valve will be opened.Reset message: If the risk of freezing the heating register is eliminated, the message will automati-cally be deleted and the door air curtain system resumes normal operation. This function has priority!
11.3 Not enabledThe system can not be put into operation.Reset message:The building management system must release the system to enable it.
11.4 Filter cleaningAfter expiry of the set filter time, (see point 7.2), it is essential that the filter and the intake grille are cleaned. The filter can be vacuumed with a vacuum cleaner.Reset message: With pressing on Clean filter the display changes and then the message will disap-pear.
EN
15
15 *GTC II
11.5 Sensor Error No sensor connected (sensor must be ordered), or the sensor is malfunc-tioning it must be replaced.
11.6 Motor Error There is a motor error in the door air curtain, please contact the technical support.
12. Help
Error Display notification Possible Cause Solution
Device without function Screen is off No voltage Switch voltage on
No enabled BMS – enable missing See point 9.3
Frostalarm Inlet temperature too is low Increase inlet temperature
No temperature control Sensor defect
U-
K-
No sensor connected
Cable break
Short circuit
See point 9.5
Replace sensor
Replace sensor
Too low airflow Engine overheat Fan defective See point 9.6
Runtime filter Suction filter dirty Filter cleaning (See point 9.4)
COM error Error in the data transfer See point 9.1
15 *GTC II
11.5 Sensor Error No sensor connected (sensor must be ordered), or the sensor is malfunc-tioning it must be replaced.
11.6 Motor Error There is a motor error in the door air curtain, please contact the technical support.
12. Help
Error Display notification Possible Cause Solution
Device without function Screen is off No voltage Switch voltage on
No enabled BMS – enable missing See point 9.3
Frostalarm Inlet temperature too is low Increase inlet temperature
No temperature control Sensor defect
U-
K-
No sensor connected
Cable break
Short circuit
See point 9.5
Replace sensor
Replace sensor
Too low airflow Engine overheat Fan defective See point 9.6
Runtime filter Suction filter dirty Filter cleaning (See point 9.4)
COM error Error in the data transfer See point 9.1
11.5 Sensor ErrorNo sensor connected (sensor must be ordered), or the sensor is malfunctioning and it must be replaced.
11.6 Motor ErrorThere is a motor error in the door air curtain, please contact the technical support.
12 Help
16
16 *GTC II
13. Circuit diagram ( EC PCB )
230V/ 50Hz
3
CONTROL
F 16 AT
L N PE
PCB EC
Connecting box
Main switch and fusesto be installed by thirdparties must complyto all applicable rules andrequirements!
Technical changes reserved
1 211 12 133 4 514 15
0
to input (CONTROL) next PCBAddress 1-9
8
AUXILIARNL2 PE
230V / 50Hz
Magnetic valve(OPTIONAL)
L PEN
8
PENL2
internAUX MON
02.01.2019lagezeichnet/signet
TeileGruppevonPos.
Werkstoff Maßstab
Blatt
Erstelldatum
GTC I EC 190102Kunde
BenennungName
Kundenzeichnung Nr.:
DatumName
1 von 1
6 716 17 8 9 10 1918 20
CPU
Addressswitch0 = MASTER1 - 9 = SLAVE
51 2
3
49
87 6
ext. C
ontac
t
fault
Opera
tion
Fros
t prot
ectio
n the
rmos
tat
not u
sed
not u
sed
nicht
beleg
t
optio
nal
optio
nal
Standard suppledshielded datacable(20 m) withRJ-45 connectors
1M
PENL1
next Fan
blau/blue
gelb/yellow
weiss/white
rot/red
4
Room
temp.
sens
orop
tiona
l
Room temperature. Sensor installed
q
BMS
On/O
ff
Y 0-10 V
0 V
+10 V
imp.
Timeroff
Fr 21.09.201807:52
Heat level0 / 0
AutomaticHand
Room Temp10°C
Fan level0 / 0
13 Circuit diagram (PCB EC) GTC I
EN
17
17 *GTC II
14. Circuit diagram ( AC PCB )
230V/ 50Hz
3
1M
CONTROL
F 16 AT
L N PE
PCB AC
Connecting box
Main switch and fusesto be installes by thirdparties must comply to all applicable rules andrequirements!
Technical changes reserved
Standard supplied shielded datacable(20 m)1:1 straight wiredRJ-45 connectors
ext. C
ontac
t
BMS
On/O
ff
Temp
eratur
e Sen
sor
q
Failur
e
Opera
tion
T1
0VST
3ST
5ST
4ST
1ST
2
Venti
lator
Step
s 1 - 5
1 211 12 133 4 514 15
Therm
ojunc
tion
optionalThermo-junction
next Fan
2
12
Trafo 8 Astep 1 - Schwarz/black 120 Vsrep 2 - Braun/brown 140 Vstep 3 - Rot/red 170 Vstep 4 - Orange/orange 200 Vstep 5 - Gelb/yellow 230 VN - Blau/blue 0 V
Trafo 16 Astep 0 - Schwarz/black 100 V *step 1 - Braun/brown 126 Vstep 2 - Rot/red 140 Vstep 3 - Orange/orange 170 Vstep 4 - Grün green 200 Vstep 5 - Gelb/yellow 230 VN - Blau/blue 0 V* without function
0
to inputCONTROLnext PCB
8
AUXILIAR
Frost
protec
tion t
herm
ostat
NL2 PE
230V / 50Hz
Magnetic valve(OPTIONAL)
L PEN
8
PENL2
internAUX MON
02.01.2019SEgezeichnet/signet
TeileGruppevonPos.
Werkstoff Maßstab
Blatt
Erstelldatum
GTC I AC UK 190102Kunde
BenennungName
Kundenzeichnung Nr.:
DatumName
1 von 1
6 716 17 8 9 10 1918 20
CPU
Adressswitch0 = MASTER1 - 9 = SLAVE
5
1 23
4
9
87 6
free
free
L1NPE
optio
nal
optio
nal
optio
nal
Raumtemp. Sensor eingebaut
optio
nal
Fr 21.09.201807:52
Heizstufe0 / 0
AutomatikHand
Raum Temp10°C
Lüfter Stufe0 / 0
Schaltuhraus
14 Circuit diagram (PCB AC) GTC I
18
13 Circuit diagram (PCB EC) GTC II
18 *GTC II
15. Circuit diagram ( EC PCB )*
230V/ 50Hz
3
CONTROL
F 16 AT
L N PE
1 211 12 133 4 514 15
0
8
AUXILIARNL2 PE
230V / 50Hz
L PEN
8
PENL2
internAUX MON
02.01.2019segezeichnet/signet
TeileGruppevonPos.
Werkstoff Maßstab
Blatt
Erstelldatum
GTC II EC 190102Kunde
BenennungName
Kundenzeichnung Nr.:
DatumName
1 von 1
6 716 17 8 9 10 1918 20
CPU
5
1 23
4
9
87 6
q
optio
nal
optio
nal
1M
PENL1
blau/blue
gelb/yellow
weiss/white
rot/red
4
Blow
Out S
enso
r
q
230V
Analo
g Sig
nal 0
-10 V
M 24V
7 17
LNG0
Y
G
optional
Siemens 2-WayValve optional
PE
PCB EC
Connecting box
Mains switch and fusesto be installed by thirdparties must comply to all applicable rules andrequirements!
Technical changes reserved
to inputCONTROLnext PCB
Magnetic valve(OPTIONAL)
Adressswitch0 = MASTER1 - 9 = SLAVE
ext. C
ontac
t
BMS
On/O
ff
Room
temp.
sens
or
Falilu
re
Opera
tion
Fros
t prot
ectio
n the
rmos
tat
free
Standard suppled shielded datacable(20 m) 1:1 straight wiredRJ-45 connectors next
Fan
Room temperature. Sensor installed
Y PWM
0 V
+10 V
imp.
Timeroff
Fr 21.09.201807:52
Heat level0 / 0
AutomaticHand
Room Temp10°C
Fan level0 / 0
EN
19
14 Circuit diagram (PCB AC) GTC II
19 *GTC II
16. Circuit diagram ( AC PCB )*
230V/ 50Hz
3
CONTROL
F 16 AT
L N PE
PCB AC
connecting box
Mains switch and fusesto be installed by thirdparties must complyto all applicable rules andrequirements!
technical changes reserved
1 211 12 133 4 514 15
0
8
AUXILIARNL2 PE
230V / 50Hz
Magnetic valve(OPTIONAL)
L PEN
8
PENL2
internAUX MON
02.01.2019SEgezeichnet/signet
TeileGruppevonPos.
Werkstoff Maßstab
Blatt
Erstelldatum
GTC II AC UK 190102Kunde
BenennungName
Kundenzeichnung Nr.:
DatumName
1 von 1
6 716 17 8 9 10 1918 20
CPU
AdressSchalter0 = MASTER1 - 9 = SLAVE
5
1 23
4
9
87 6
ext. C
ontac
t
Temp
eratur
e Sen
sor
q
Failur
e
Opera
tion
Fros
t prot
ectio
n the
rmos
tatop
tiona
l
optio
nal
BMS
On/O
ff
Blow
out T
emp S
enso
r
q
230VM 24V
7 17
LNGO
Y
G
optio
nal
optional PE
1M
T1
0VST
3ST
5ST
4ST
1ST
2
Fan l
evels
1 - 5
nextfan
2
12
Trafo 8 AStufe 1 - Schwarz/black 120 VStufe 2 - Braun/brown 140 VStufe 3 - Rot/red 170 VStufe 4 - Orange/orange 200 VStufe 5 - Gelb/yellow 230 VN - Blau/blue 0 V
Trafo 16 AStufe 0 - Schwarz/black 100 V *Stufe 1 - Braun/brown 126 VStufe 2 - Rot/red 140 VStufe 3 - Orange/orange 170 VStufe 4 - Grün green 200 VStufe 5 - Gelb/yellow 230 VN - Blau/blue 0 V* Without function
L1NPE
Therm
ojunc
tion
optio
nal
Standard suppliedshielded datacable(20 m)1:1 straight wiredRJ-45 connectors
to inputCONTROLnext PCB
Analo
g Sig
nal 0
-10 V
Room temperature. Sensor installed
optionalThermo-junction
Siemens 2-WayValve optional
Timeroff
Fr 21.09.201807:52
Heat level0 / 0
AutomaticHand
Room Temp10°C
Fan level0 / 0
20
Inhoudsopgave
1 Toegang tot het Home menu............................................................................. 212 Handmatig instellen........................................................................................... 212.1 Ventilatorstand instellen................................................................................................................ 212.2 Verwarmingsstand instellen.......................................................................................................... 213 Automatische afkoelbeveiliging (AS)............................................................... 223.1 Afkoelbeveiliging (AS) inschakelen.............................................................................................. 223.2 Afkoelbeveiligingstemperatuur (AS) instellen........................................................................... 224 Automatische ruimtetemperatuur (RT)..........................................................234.1 Ruimtetemperatuur (RT) inschakelen.........................................................................................234.2 Ruimtetemperatuur (RT) instellen................................................................................................235 Automatisch deurcontact (TK).........................................................................245.1 Deurcontact (TK) inschakelen......................................................................................................245.2 Ventilatiestand van deurcontact (TK) inschakelen......................................................................245.3 Verwarming bij deurcontact (TK) instellen..................................................................................255.4 Deurcontact (TK) instellen met uitschakelvertraging................................................................256 Automatische uitblaastemperatuur (AT)...........................................................266.1 Uitblaastemperatuur (AT) inschakelen...........................................................................................266.2 Gewenste uitblaastemperatuur (UT) instellen..........................................................................266.3 Ventilatiestanden (AT) instellen.......................................................................................................277 Timer..................................................................................................................278 Combinatie van AS, RT, TK en AT.......................................................................289 Instellingen........................................................................................................289.1 Taal.............................................................................................................................................289.2 Filter vervangen................................................................................................................................299.3 Beeldscherm........................................................................................................................299.3.1 Helderheid.............................................................................................................................299.3.2 Beeldscherm draaien.......................................................................................................................299.3.3 Beeldscherm blokkeren..................................................................................................................309.4 Datum/Tijd....................................................................................................................309.5 Nalooptijd.............................................................................................................................309.6 Fabrieksinstellingen........................................................................................................319.7 Geheugenfunctie..................................................................................................................3110 Screensaver.......................................................................................................3111 Foutberichten....................................................................................................3211.1 COM-fouten..................................................................................................................3211.2 Vorstbeveiliging (optioneel)............................................................................................................3211.3 Geen vrijgave.....................................................................................................................................3211.4 Filter reinigen.....................................................................................................................................3211.5 Sensor defect.....................................................................................................................................3311.6 Motorstoring.............................................................................................................................3312 Problemen oplossen.............................................................................................3313 Schakelschema (EC-printplaat) GTC I..............................................................3414 Schakelschema (AC-printplaat) GTC I..............................................................3515 Schakelschema (EC-printplaat) GTC II.............................................................3616 Schakelschema (AC-printplaat) GTC II.............................................................37
NL
21
1 Toegang tot het Home menu
Als de stroom wordt ingeschakeld wordt gedu-rende ca. 5 seconden het bedrijfslogo weergege-ven.Daarna volgt het startscherm. Druk op het logo om te beginnen. Druk op de aan/uit toets om de bediening in te schakelen. Groen is aan en rood is uit.
2 Handmatig instellen
2.1 Ventilatorstand instellen
Druk op "Ventilatorstand" om de weergave te wijzigen.Gebruik de pijlen om een ventilatiestand van 0 tot 5 in te stellen.Druk op "%-ventilatie" om het systeem traploos te regelen (alleen mogelijk bij gebruik van EC-motoren).Druk op "Home" om terug te keren naar het startscherm.
2.2 Verwarmingsstand instellen
Druk op "Verwarmingsstand" om de weergave te wijzigen.
0: verwarming uit.1: verwarming aan.
Gebruik de pijlen om verwarmingsstand 1 in te schakelen.
Druk op "Home" om terug te keren naar het startscherm.
Op het startscherm worden de geselecteerde verwarmings- en ventilatiestand in het blauw weergegeven.
De actieve standen worden in het zwart weergegeven.
22
3 Automatische afkoelbeveiliging (AS)
De afkoelbeveiliging voorkomt dat de ruimte afkoelt. Als de temperatuur onder de geselecteerde afkoelbeveiligingstemperatuur daalt, worden de verwarmingsstand en de 1e ventilatorstand ingeschakeld.
3.1 Afkoelbeveiliging (AS) inschakelen
Druk op "Automatisch" om de weergave te wijzigen.Druk op "Afkoelbeveiliging" om deze in te schakelen.Op het scherm Automatisch wordt nu weergegeven dat de afkoelbeveiliging actief is. (AS)Druk op "Home" om terug te keren naar het startscherm.
3.2 Afkoelbeveiligingstemperatuur (AS) instellen
Als u op "Afkoelbeveiliging" drukt, kunt u met de pijlen de gewenste insteltemperatuur selecteren.
Druk op "Home" om terug te keren naar het startscherm.
Op het startscherm wordt de ingestelde afkoelbeveiligingstemperatuur weergegeven.
De afkoelbeveiliging heeft altijd prioriteit, ook als het systeem zich in standby bevindt.
NL
23
4 Automatische ruimtetemperatuur (RT)
Bij een automatische ruimtetemperatuur (RT) wordt op basis van de ingestelde ruimtetempera-tuur een ventilatorstand ingesteld.Hoe groter het verschil tussen de geprogram-meerde temperatuur en de feitelijke ruimtetem-peratuur, hoe hoger de ventilatorstand. (Δ1 K = 1 stand)
4.1 Ruimtetemperatuur (RT) inschakelen
Druk op "Automatisch" om de weergave te wijzigen en een automatische ruimtetemperatuur in te schakelen.
ΔT Ventilatorstand Verwarming
0 0 ON
1K 1 ON
2K 2 ON
3K 3 ON
4K 4 ON
5K 5 ON
Op het scherm Automatisch wordt nu weerge-geven dat de automatische ruimtetemperatuur actief is.Druk op "Home" om terug te keren naar het startscherm.
4.2 Ruimtetemperatuur (RT) instellen
De temperatuursensor bevindt zich in het bedieningspaneel. Optioneel kan een sensor worden aangesloten op de printplaat. Deze sensor heeft prioriteit.Druk op "Ruimtetemperatuur" om de weer-gave te wijzigen en de gewenste ruimtetempe-ratuur te selecteren. Gebruik de pijlen om de gewenste ruimtetemperatuur te selecteren.Druk op "Home" om terug te keren naar het startscherm.
Actuele waarde
Gewenste waarde
24
5 Automatisch deurcontact (TK)
Met de automatische TK-instelling regelt u dat het systeem bij automatisch deurcontact wordt ingeschakeld met de geselecteerde ventilatorstand.
5.1 Deurcontact (TK) inschakelen
Druk op "Automatisch" om de weergave te wijzigen en het automatisch deurcontact in te schakelen.
Op het scherm Automatisch wordt nu weergegeven dat het deurcontact actief is
Druk op "Home" om terug te keren naar het startscherm.
5.2 Ventilatiestand van deurcontact (TK) inschakelen
Druk op Ventilatorstand om de weergave te wijzigen. Gebruik de pijlen om een ventilatiestand van 0 tot 5 in te stellen.
De actieve standen worden in het zwart weergegeven.
Druk op "Home" om terug te keren naar het startscherm.
NL
25
5.3 Verwarming bij deurcontact (TK) instellen
Druk op Verwarmingsstand om de weergave te wijzigen. Gebruik de pijlen om de verwarmingsstand in te stellen.
0: verwarming uit.1: verwarming aan.
Druk op "Home" om terug te keren naar het startscherm.
5.4 Deurcontact (TK) instellen met uitschakelvertraging
Druk op het tandwiel-pictogram (Instellingen) om de weergave te wijzigen en de uitschakelvertraging te wijzigen.
Daarmee stelt u in dat het systeem ook nadat de deur is gesloten nog max. 300 seconden actief blijft. Als de deur vaker na elkaar wordt geopend, wordt de Nalooptijd opnieuw gestart.
Druk op "Nalooptijd" en stel met de pijlen de gewenste duur van de Nalooptijd in.
Druk op "OK" om de instelling te bevestigen.
Druk op "Home" om terug te keren naar het startscherm.
26
6 Automatische uitblaastemperatuur (AT)*
Met de automatische uitblaastemperatuur (AT) kunt u via een elektronische regelklep in het watercircuit de temperatuur van de uitgeblazen lucht instellen. De ventilatorstand blijft constant. Zo wordt een optimale afscherming via het luchtgordijn bereikt.
6.1 Uitblaastemperatuur (AT) inschakelen*
Druk op "Automatisch" om de weergave te wijzigen en de uitblaastemperatuur in te schakelen.
Op het scherm Automatisch wordt nu weergegeven dat de uitblaastemperatuur actief is.
Druk op "Home" om terug te keren naar het startscherm.
6.2 Gewenste uitblaastemperatuur (UT) instellen*
Druk op "Uitblaastemp" om de weergave te wijzigen en de uitblaastemperatuur te selecteren.
Gebruik de pijlen om de gewenste uitblaastemperatuur te selecteren.
Druk op "Home" om terug te keren naar het startscherm.
* Alleen voor GTC II
Actuele waarde
Gewenste waarde
NL
27
6.3 Ventilatiestanden (AT) instellen*
Druk op "Ventilatorstand" om de weergave te wijzigen.
Gebruik de pijlen om een ventilatiestand van 0 tot 5 in te stellen.
Druk op "Home" om terug te keren naar het startscherm.
7 Timer*
Met de timer is het mogelijk 12 AAN– en UIT-schakeltijden programmeren.De actieve tijd wordt groen weergegeven, de inactieve tijd wordt rood weergegeven.Druk op "Timer" om de weergave te wijzigen en de schakeltijden in te schakelen.Druk op "Nieuw" om de weergave te wijzigen en de schakeltijden te programmeren.Druk op "aan" om de timer te activeren.
Gebruik de pijlen om de tijd en dag in te stellen.Druk op "opslaan".
Gebruik de pijl om de volgende schakeltijd in te stellen.
Druk op "Home" om terug te keren naar het startscherm.
* Alleen voor GTC II
28
8 Combinatie van AS, RT, TK en AT*
Alle automatische programma's kunnen worden gecombineerd. In punt 3, 4, 5 en 6 leest u hoe u de programma's kunt instellen.
Aanwijzing 1: Indien AT (uitblaastemperatuur), TK (deurcontact) en RT (ruimtetemperatuur) worden gecombineerd, hebben RT (ruimtetemperatuur) en AT (uitblaastemperatuur) prioriteit. Als de deur is geopend, wordt de uitblaastemperatuur geregeld volgens de geselecteerde ventilatiestand.
Aanwijzing 2: Indien AT (uitblaastemperatuur) en TK (deurcontact) worden gecombineerd, wordt de uitblaastemperatuur geregeld volgens de geselecteerde ventilatiestand als de deur is geopend.
Aanwijzing 3: Indien RT (ruimtetemperatuur) en TK (deurcontact) worden gecombineerd, heeft TK (deurcontact) prioriteit.
Aanwijzing 4: Indien AT (uitblaastemperatuur) en RT (ruimtetemperatuur) worden gecombineerd, wordt de verwarming uitgeschakeld zodra de insteltemperatuur is bereikt.
9 Instellingen
Druk op het tandwiel-pictogram (Instellingen) om de weergave te wijzigen en de gewenste instellingen op te geven.
9.1 TaalDruk op "Taal" om de weergave te wijzigen en de gewenste taal te kiezen.
De volgende talen zijn beschikbaar:Nederlands - Frans - Deens - Engels - Duits - Italiaans - Pools
* Alleen voor GTC II
NL
29
9.1 Filter vervangen
Als er een vervangingstijd voor het filter is geselecteerd, wordt er na het aflopen van deze tijd een bericht weergegeven, dat het luchtaanvoerfilter binnenkort moet worden vervangen.Gebruik de pijlen om de gewenste tijd voor het vervangen van het filter te selecteren en druk op 'opslaan'.U kunt kiezen uit 0 tot 999 uur.
9.3 Beeldscherm
9.3.1 HelderheidDruk op "Scherm" om de weergave te wijzigen.Druk vervolgens op "Schermhelderheid". De weergave verandert opnieuw.
Gebruik de pijlen om de gewenste helderheid van het beeldscherm te selecteren.
Druk op "Home" om terug te keren naar het startscherm.
9.3.2 Beeldscherm draaienDruk op "Beeldscherm" om de weergave te wijzigen.
Druk vervolgens op "draaien" om de weergave rechtsom te draaien.
Druk op "Home" om terug te keren naar het startscherm.
30
9.3.3 Beeldscherm blokkerenDruk op "Scherm" om de weergave te wijzigen.
Druk op "slot" om het beeldscherm te blokkeren.
Om de blokkering op te heffen, drukt u op het logo en vervolgens nog drie keer op het logo.
9.4 Datum/tijdDruk op "Datum/tijd" om de weergave te wijzigen.
Gebruik de pijlen om de gewenste datum en tijd in te stellen.Druk op "OK" om te bevestigen.
9.5 NalooptijdZie punt 5.4
NL
31
9.6 FabrieksinstellingenIn het menu Fabrieksinstellingen kan een RESET van het regelsysteem worden gerealiseerd.
Alle gegevens worden gewist en de fabrieksinstellingen worden hersteld.
Druk op "Fabrieksinstellingen" om de weergave te wijzigen.
Druk op "OK" om te bevestigen.
9.7 GeheugenfunctieDe GTC is voorzien van een geheugenfunctie, waardoor het systeem bij een stroomuitval weer met de eerder ingestelde waarden wordt herstart.U kunt deze functie uitschakelen door op "Memory" te drukken.
10 ScreensaverIndien de GTC na 5 minuten niet meer wordt bediend, wordt automatisch de screensaver ingeschakeld (beeldscherm wordt donker).
U kunt de GTC activeren door op het logo te drukken.
32
11 Foutberichten
Foutberichten worden gemeld op het scherm door middel van een gevarendriehoek.
11.1 COM-foutenEr is sprake van een communicatiefout tussen de afzonderlijke onderdelen van het regelsysteem. (Bedieningspaneel, datakabel en besturingskaart.)COM 0 = Fout tussen bedieningspaneel en bestu-ringskaartCOM 1 tot 9 = Fouten tussen MASTER-print-plaat en SLAVE-printplaat. U kunt met het GTC-regelsysteem maximaal 10 luchtgordijninstallaties bedienen via één bedieningspaneel. Hiervoor is elke printplaat voorzien van een coderingsschake-laar. De codering luidt:MASTER = 0SLAVE = 1 - 9COM-fout E is voor overige busfouten.U kunt een RESET doorvoeren door de voeding uit en vervolgens weer in te schakelen.Let er daarbij op dat u SLAVE-systemen eerst van stroom voorziet!
11.2 Vorstbeveiliging (optioneel)Als de temperatuur van de aangevoerde lucht onder ca. 7 °C daalt, worden de ventilatoren uit-geschakeld en wordt de magneetklep geopend.
Foutbericht annuleren: Als het gevaar op bevrie-zing van het verwarmingselement is geweken, wordt het foutbericht automatisch geannuleerd en wordt de normale werking van de luchtgor-dijninstallatie hervat.
Deze functie heeft altijd voorrang!
11.3 Geen vrijgaveDe installatie kan niet in bedrijf worden genomen.
Foutbericht annuleren: Het gebouwbeheersys-teem (GBS) moet het systeem vrijgeven voor gebruik.
NL
33
11.4 Filter reinigenNadat de periode voor het vervangen van het filter is verstreken (zie punt 9.2) is het absoluut noodzakelijk dat het geïntegreerde filter of aanvoerrooster wordt gereinigd. Het filter kan met een stofzuiger worden schoon gezogen of met een milde zeepoplossing worden gewassen.
LET OP! Als het filter met water wordt gereinigd, wacht dan tot het filter volledig is opgedroogd alvorens het terug te plaatsen.
Foutbericht annuleren: Druk op Filter reinigen om de weergave te wijzigen en het foutbericht te annuleren.
11.5 Sensor defectEr is geen sensor aangesloten (sensor moet worden besteld), of de sensor is defect en moet worden vervangen.
11.6 MotorstoringEr is sprake van een motorstoring in het luchtgordijn. Neem contact op met de technische dienst.
12 Problemen oplossen
Fout Weergave Mogelijke oorzaken Oplossing
Installatie werkt niet Beeldscherm uit Geen netvoeding Netvoeding inschakelen
Geen vrijgave Storing in GBS-vrijgave zie punt 11.3
Vorstbeveiliging Luchtaanvoertemperatuur te laag
Luchtaanvoertempe-ratuur verhogen
Geen temperatuur-regeling
Sensor defect U-K
Geen sensor aangelostenKabelbreukKortsluiting
zie punt 11.5 Sensor vervangen
Onvoldoende lucht-stroomsnelheid
Motorstoring Ventilator defect zie punt 11.6
Filter vervangen Aanzuigrooster vuil Filter reinigen (zie punt 11.4)
COM-fout Fout in dataoverdracht zie punt 11.1
34
16 *GTC II
13. Circuit diagram ( EC PCB )
230V/ 50Hz
3
CONTROL
F 16 AT
L N PE
PCB EC
Connecting box
Main switch and fusesto be installed by thirdparties must complyto all applicable rules andrequirements!
Technical changes reserved
1 211 12 133 4 514 15
0
to input (CONTROL) next PCBAddress 1-9
8
AUXILIARNL2 PE
230V / 50Hz
Magnetic valve(OPTIONAL)
L PEN
8
PENL2
internAUX MON
02.01.2019lagezeichnet/signet
TeileGruppevonPos.
Werkstoff Maßstab
Blatt
Erstelldatum
GTC I EC 190102Kunde
BenennungName
Kundenzeichnung Nr.:
DatumName
1 von 1
6 716 17 8 9 10 1918 20
CPU
Addressswitch0 = MASTER1 - 9 = SLAVE
51 2
3
49
87 6
ext. C
ontac
t
fault
Opera
tion
Fros
t prot
ectio
n the
rmos
tat
not u
sed
not u
sed
nicht
beleg
t
optio
nal
optio
nal
Standard suppledshielded datacable(20 m) withRJ-45 connectors
1M
PENL1
next Fan
blau/blue
gelb/yellow
weiss/white
rot/red
4
Room
temp.
sens
orop
tiona
l
Room temperature. Sensor installed
q
BMS
On/O
ff
Y 0-10 V
0 V
+10 V
imp.
Timeroff
Fr 21.09.201807:52
Heat level0 / 0
AutomaticHand
Room Temp10°C
Fan level0 / 0
13 Circuit diagram (PCB EC) GTC I
NL
35
17 *GTC II
14. Circuit diagram ( AC PCB )
230V/ 50Hz
3
1M
CONTROL
F 16 AT
L N PE
PCB AC
Connecting box
Main switch and fusesto be installes by thirdparties must comply to all applicable rules andrequirements!
Technical changes reserved
Standard supplied shielded datacable(20 m)1:1 straight wiredRJ-45 connectors
ext. C
ontac
t
BMS
On/O
ff
Temp
eratur
e Sen
sor
q
Failur
e
Opera
tion
T1
0VST
3ST
5ST
4ST
1ST
2
Venti
lator
Step
s 1 - 5
1 211 12 133 4 514 15
Therm
ojunc
tion
optionalThermo-junction
next Fan
2
12
Trafo 8 Astep 1 - Schwarz/black 120 Vsrep 2 - Braun/brown 140 Vstep 3 - Rot/red 170 Vstep 4 - Orange/orange 200 Vstep 5 - Gelb/yellow 230 VN - Blau/blue 0 V
Trafo 16 Astep 0 - Schwarz/black 100 V *step 1 - Braun/brown 126 Vstep 2 - Rot/red 140 Vstep 3 - Orange/orange 170 Vstep 4 - Grün green 200 Vstep 5 - Gelb/yellow 230 VN - Blau/blue 0 V* without function
0
to inputCONTROLnext PCB
8
AUXILIAR
Frost
protec
tion t
herm
ostat
NL2 PE
230V / 50Hz
Magnetic valve(OPTIONAL)
L PEN
8
PENL2
internAUX MON
02.01.2019SEgezeichnet/signet
TeileGruppevonPos.
Werkstoff Maßstab
Blatt
Erstelldatum
GTC I AC UK 190102Kunde
BenennungName
Kundenzeichnung Nr.:
DatumName
1 von 1
6 716 17 8 9 10 1918 20
CPU
Adressswitch0 = MASTER1 - 9 = SLAVE
5
1 23
4
9
87 6
free
free
L1NPE
optio
nal
optio
nal
optio
nal
Raumtemp. Sensor eingebaut
optio
nal
Fr 21.09.201807:52
Heizstufe0 / 0
AutomatikHand
Raum Temp10°C
Lüfter Stufe0 / 0
Schaltuhraus
14 Circuit diagram (PCB AC) GTC I
36
13 Circuit diagram (PCB EC) GTC II
18 *GTC II
15. Circuit diagram ( EC PCB )*
230V/ 50Hz
3
CONTROL
F 16 AT
L N PE
1 211 12 133 4 514 15
0
8
AUXILIARNL2 PE
230V / 50Hz
L PEN
8
PENL2
internAUX MON
02.01.2019segezeichnet/signet
TeileGruppevonPos.
Werkstoff Maßstab
Blatt
Erstelldatum
GTC II EC 190102Kunde
BenennungName
Kundenzeichnung Nr.:
DatumName
1 von 1
6 716 17 8 9 10 1918 20
CPU
5
1 23
4
9
87 6
q
optio
nal
optio
nal
1M
PENL1
blau/blue
gelb/yellow
weiss/white
rot/red
4
Blow
Out S
enso
r
q
230V
Analo
g Sig
nal 0
-10 V
M 24V
7 17
LNG0
Y
G
optional
Siemens 2-WayValve optional
PE
PCB EC
Connecting box
Mains switch and fusesto be installed by thirdparties must comply to all applicable rules andrequirements!
Technical changes reserved
to inputCONTROLnext PCB
Magnetic valve(OPTIONAL)
Adressswitch0 = MASTER1 - 9 = SLAVE
ext. C
ontac
t
BMS
On/O
ff
Room
temp.
sens
or
Falilu
re
Opera
tion
Fros
t prot
ectio
n the
rmos
tat
free
Standard suppled shielded datacable(20 m) 1:1 straight wiredRJ-45 connectors next
Fan
Room temperature. Sensor installed
Y PWM
0 V
+10 V
imp.
Timeroff
Fr 21.09.201807:52
Heat level0 / 0
AutomaticHand
Room Temp10°C
Fan level0 / 0
NL
37
14 Circuit diagram (PCB AC) GTC II
19 *GTC II
16. Circuit diagram ( AC PCB )*
230V/ 50Hz
3
CONTROL
F 16 AT
L N PE
PCB AC
connecting box
Mains switch and fusesto be installed by thirdparties must complyto all applicable rules andrequirements!
technical changes reserved
1 211 12 133 4 514 15
0
8
AUXILIARNL2 PE
230V / 50Hz
Magnetic valve(OPTIONAL)
L PEN
8
PENL2
internAUX MON
02.01.2019SEgezeichnet/signet
TeileGruppevonPos.
Werkstoff Maßstab
Blatt
Erstelldatum
GTC II AC UK 190102Kunde
BenennungName
Kundenzeichnung Nr.:
DatumName
1 von 1
6 716 17 8 9 10 1918 20
CPU
AdressSchalter0 = MASTER1 - 9 = SLAVE
5
1 23
4
9
87 6
ext. C
ontac
t
Temp
eratur
e Sen
sor
q
Failur
e
Opera
tion
Fros
t prot
ectio
n the
rmos
tatop
tiona
l
optio
nal
BMS
On/O
ff
Blow
out T
emp S
enso
r
q
230VM 24V
7 17
LNGO
Y
G
optio
nal
optional PE
1M
T1
0VST
3ST
5ST
4ST
1ST
2
Fan l
evels
1 - 5
nextfan
2
12
Trafo 8 AStufe 1 - Schwarz/black 120 VStufe 2 - Braun/brown 140 VStufe 3 - Rot/red 170 VStufe 4 - Orange/orange 200 VStufe 5 - Gelb/yellow 230 VN - Blau/blue 0 V
Trafo 16 AStufe 0 - Schwarz/black 100 V *Stufe 1 - Braun/brown 126 VStufe 2 - Rot/red 140 VStufe 3 - Orange/orange 170 VStufe 4 - Grün green 200 VStufe 5 - Gelb/yellow 230 VN - Blau/blue 0 V* Without function
L1NPE
Therm
ojunc
tion
optio
nal
Standard suppliedshielded datacable(20 m)1:1 straight wiredRJ-45 connectors
to inputCONTROLnext PCB
Analo
g Sig
nal 0
-10 V
Room temperature. Sensor installed
optionalThermo-junction
Siemens 2-WayValve optional
Timeroff
Fr 21.09.201807:52
Heat level0 / 0
AutomaticHand
Room Temp10°C
Fan level0 / 0
38
MARK BVBENEDEN VERLAAT 87-89VEENDAM (NEDERLAND)POSTBUS 13, 9640 AA VEENDAMTELEFOON +31(0)598 656600FAX +31 (0)598 624584info@mark.nlwww.mark.nl
MARK EIRE BVCOOLEA, MACROOMCO. CORK P12 W660 (IRELAND)PHONE +353 (0)26 45334FAX +353 (0)26 45383sales@markeire.comwww.markeire.com
MARK BELGIUM b.v.b.a.ENERGIELAAN 122950 KAPELLEN (BELGIË/BELGIQUE)TELEFOON +32 (0)3 6669254info@markbelgium.bewww.markbelgium.be
MARK DEUTSCHLAND GmbHMAX-PLANCK-STRASSE 1646446 EMMERICH AM RHEIN (DEUTSCHLAND)TELEFON +49 (0)2822 97728-0 TELEFAX +49 (0)2822 97728-10info@mark.dewww.mark.de
MARK POLSKA Sp. z o.oUL. JASNOGÓRSKA 2742-202 CZĘSTOCHOWA (POLSKA) PHONE +48 34 3683443 FAX +48 34 3683553 info@markpolska.plwww.markpolska.pl
S.C. MARK ROMANIA S.R.L.STR. KOS KAROLY NR. 1 A540297 TARGU MURES (ROMANIA)TEL/FAX +40 (0)265-266.332office@markromania.rowww.markromania.ro
CERTIFICATION N°: 17.07.011 AIRSTREAM
CERTIFICATION N°: 17.07.011 AIRSTREAM
CERTIFICATION N°: 17.07.011 AIRSTREAM
CERTIFICATION N°: 17.07.011 AIRSTREAM