MaterialPolymerDensity Shown (range)Compression Deflection (PSI) ASTM D-1667Compression Set % loss of orig. height ASTM D-1667Tensile Strength- ASTM D412Flammability MVSS302 (*Gauge Specific)TemperatureUL (*Gauge Specific)Thickness Range

TypeMaterialReinforcementAdhesiveThermal Impedance (C in.2/W) ASTM E1530Thermal Conductivity (W/MK) ASTM E1530Dielectric Strength (volts/mil)UL (*gauge specific)Thickness

MaterialPolymerDensity Shown (range)Compression Deflection (PSI)Compression Set % Tensile Strength (*AAMA 2.18)Flammability MVSS302 (*Gauge Specific)TemperatureUL (*Gauge Specific)Thickness

TypeMaterialWater Absorption % ASTM D570Dielectric Strength (volts/mil)UL (*gauge specific) ThicknessThickness availabilityTemperature

MaterialPolymerDensity Shown (range)Compression Deflection Compression Set % loss Tensile StrengthFlammability MVSS302 (*Gauge Specific)Temperature Range (constant)UL (*Gauge Specific)Thickness

TypeMaterialThickness RangeDensity lbs/ftHardness Shore A (*Change)Force to Compress 10% PSI (*Change)Static Shear Adhesion Hours (*Change)ColorMarket

MaterialCore PolymerAdhesive180° Peel Adhesion (PSI) (*other testing methods)Tensile Strength (PSI)Dynamic Shear Strength (PSI)Temperature Foam colorLinerDensityThickness

MaterialCore PolymerAdhesive180 Peel Adhesion (PSI) (*90 Peel adhesion) Dynamic Tensile Strength (PSI) Dynamic Shear Strength (PSI)TemperatureCore colorLinerDensityThickness

Fine Line Masking Tape-Extremely flexible -PVC Film-Rubber adhesive-Temp. Resistance-302˚F-No shrinkage-Easy to remove-Conformable-Die-cuttable

GENERALGASKETING

THERMALMANAGEMENT

GENERALGASKETING

ELECTRICAL INSULATORS

HIGH-TEMPERATUREGASKETING

WINDOW ANDGLAZING TAPES

SPECIALTY PRODUCTSBONDING

BONDING &SPECIALTY TAPES

P-FoamPVC Foam4# (4-25lb).7 to .9 8%15 (PSI)Pass-15F to 160F*UL94 HBF.0625” to .500”

GAP FILLER-R10404Thermally conductive silicone n/aSilicone or Acrylic1.0 to 6.0 (DOC).30 to .65 (DOC)100V-1*32 to 250 MILS

4790-92Urethane15#2<2%15 (PSI)n/a-40F to 194FUL50 & UL508.125” to .500”

GE-FR700Lexan.28 (*ISO 62)1,500V0*.010”.010” to .017”115C

Thermalbond™ V2100Urethane.125” to .500”313531 to compress 10%2000Gray or BlackStructural Glazing

TypeAdhesiveGaugeFilm TypeColors

Market

Protective FilmsWater & Solvent Based Acrylic 1.2 to 10 MilPE, PP, PET, Clear, Blue, Yellow, Green, Opaque, Black & WhiteAutomotive, Construction, Metal, Laminates, Optical

Top MaterialBubble Material

Foil BubbleFoil / Film 1.8 milPolyethylene 2 mil

*DOC-Depends on Compression Force

TypeAdhesiveThicknessesMaterialCoefficient of friction

Lo-Skid MaterialAcrylic.016” to .125”Urethane1.1

TypeAdhesiveTotal ThicknessSpecification

Conspicuity TapePressure Sensitive.008”DOT-C2

TypeFoamFoam DensityScrimCoating

Scrim Foam .060” Polyethylene 1lbWoven Polyethylene1.2 mil Polyethylene w/ UV additives

TypeMaterialDensity shown (range)TemperatureThickness rangeFilmCompression Set % loss of orig. height

PVC MylarV744M9# (4-15lb).15F to 160F.0625” to .375”Mylar8%

Ceramic Fiber PaperAlumina Silicate fibers10-13#n/an/a75-90 PSIn/a2012FUL94 V0.0312” to .250”

Z545-AutomotiveUrethaneAcrylic6.75 lb/in width130 NTP-11120 NTP-5-40F to 200FBlackPoly-Blue30 lb/ft3

.045”

A3230AcrylicAcrylic*10 lb/in widthn/a40 ASTM D-3163-30F to 200FClearPoly-Bluen/a.118”

4216-SENEOPRENE-EPDM-SBR5-7#5-9n/a50 (PSI) Pass-40F to 158FUL94 HBF & HF1.0625” to 1.75”

Thermally Conductive FabricTF1879-Silicone coatedFiberglassOptional-silicone or acrylic.291.23500UL 94 V-09.0 MILS

4701-41Urethane15-30#5-40<5%40-120 (PSI)n/a-40F to 194F*UL50 & UL508.031” to .500”

Formex™GK10Polypropylene.06%2,200V0 & VTM-0.010”.005” to .040”106C to 115C

Thermalbond™ V2200Urethane.125” to .375”2230162000BlackStructural Glazing

HT-800Silicone22#9 (PSI) ASTM-D10565% ASTM D-105645 (PSI) ASTM D-375Pass-67F to 392FUL94 V0 (*HF1).0312” to .500”

3M™ PT 1100 AutomotiveAcrylicAcrylic20lb/in (*90˚ Peel)90 (PSI)n/a-40F to 250FBlackRed-GL-1 Poly 37 lb/ft3

.045”

V28120UrethaneAcrylic13 lb/in width75 NTP-11100 -40F to 200FBlackPoly-Blue30 lb /ft3

.120”

4114-EEPDM Sponge4.5-7 #2-5 (PSI)n/a60 (PSI) Pass-90F to 275Fn/a.0625” to 1.75”

Thermally Conductive TapeC695-graphite tapen/aThermally Conductive Acrylic.122.0Non-insulating---6.0 MILS

EG416Polyolefin4#n/an/a280% @ 50 (PSI) AAMA 2.18n/a-40F to 160Fn/a.063” to .250”

Nomex™ 410Aramid Paper.1%430-1600 V0*.010”.002” to .030”220C

V990PVC.0625” to .250”15n/a8.9 (*30% PSI)n/aBlack, Gray, WhiteWindow Glazing

R10400 MediumSilicone35#10 (PSI) ASTM-D105610% ASTM D-1056100 (PSI) ASTM D-412Pass-100F to 500FUL94 V0 (*HF1).0625” to .500”

3M VHB™ 4951-IndustrialAcrylicAcrylic18lb/in (*90˚ Peel)110 lb/in2 280 lb/in2 2200FWhiteClear Polyester50 lb/ft3

.045”

4965 Transfer TapePETAcrylic5.625 lb/in width11.4 lbs/inn/a176F (max)ClearPET Carrier & PP linern/a.008”

EPDMEPDM Solid80 Duro n/a25% (ASTM D395B)1500 (PSI) Pass-40F to 240Fn/a.0156” to 1”

3M™ 433High Temp. Foil Tapen/aSilicone-65F to 600F (*Temperature Range)n/an/aF.A.R. 25.853(a)3.6 MILS

EtherPolyether2#n/a10%n/aSAEJ-369(b), FAR.853(B)-45F to 228FUL 94 HF1.125” to 2.0”

FishpaperVulcanized Fibre Paper50%250UL E-31556 (M).030”.010” to .062”110C

V1520PVC.063” to .500”15*40 (Shore OO) ASTM D2240*7 PSI (ASTM-1667-25%)1000 grams for 10 days

BlackAAMA 810.1-92

Cequin-3M™Inorganic Paper1% ASTM D-6441-9.2KV (ASTM-D149)UL 1446.010”.005” to .060”220C

3M™ VHB™ Window TapeAcrylic core & Adhesive.045”45 lb./ft3

110 lb/in2 (Dynamic tensile)n/a70lb/in2 (*dynamic shear PSI)Black or GrayMuntin bar tape

MF Siltec-LDSilicone9.5-11#.8 (PSI) ASTM-D10565% ASTM D-105615 (PSI) ASTM D-412n/a-67F to 392FFAR 25.853 para (a-1).125” to 1.0”

3M VHB™ 4959-IndustrialAcrylicAcrylic20 lb/in (*90˚ Peel)75 lb/in2 255 lb/in2 2300FWhiteClear PET or Red PE45 lb/ft3

.120”

All Foam Materials arevavailable with a variety of adhesive systems.

*Items noted with an asterick were tested using a different specification.

See individual product bulletin for details. Purchaser and/or the end user of the product, assumes the risk of determining the suitability of use for this product. Purchaser and/or end user assumes all risk and liability whatsoever in connection with the use of the product sold herein.

Rewind Slitting

ISO 9001:2000113 Swett Avenue, Americus GA 31709 P 800.226.1863 F 229.928.2537

Spooling

Assembly Custom Sewing

CustomFabricatedSolutions

ww

w.u

sa-tsg.co

mC

usto

m Fab

ricated S

olu

tion

s

Capabilities

Additional Capabilities

Suppliers

Lathe SlittingLaminating

Flat-Bed Die Cutting

ExtrusionsSonic Welding

Kanban Programs

Die-Cutting Rotary Die-Cutting