GENERAL THERMAL GASKETING MANAGEMENT GENERAL … · 2020. 7. 7. · Muntin bar tape MF Siltec-LD...
2
Material Polymer Density Shown (range) Compression Deflection (PSI) ASTM D-1667 Compression Set % loss of orig. height ASTM D-1667 Tensile Strength- ASTM D412 Flammability MVSS302 (*Gauge Specific) Temperature UL (*Gauge Specific) Thickness Range Type Material Reinforcement Adhesive Thermal Impedance (C in.2/W) ASTM E1530 Thermal Conductivity (W/MK) ASTM E1530 Dielectric Strength (volts/mil) UL (*gauge specific) Thickness Material Polymer Density Shown (range) Compression Deflection (PSI) Compression Set % Tensile Strength (*AAMA 2.18) Flammability MVSS302 (*Gauge Specific) Temperature UL (*Gauge Specific) Thickness Type Material Water Absorption % ASTM D570 Dielectric Strength (volts/mil) UL (*gauge specific) Thickness Thickness availability Temperature Material Polymer Density Shown (range) Compression Deflection Compression Set % loss Tensile Strength Flammability MVSS302 (*Gauge Specific) Temperature Range (constant) UL (*Gauge Specific) Thickness Type Material Thickness Range Density lbs/ft Hardness Shore A (*Change) Force to Compress 10% PSI (*Change) Static Shear Adhesion Hours (*Change) Color Market Material Core Polymer Adhesive 180° Peel Adhesion (PSI) (*other testing methods) Tensile Strength (PSI) Dynamic Shear Strength (PSI) Temperature Foam color Liner Density Thickness Material Core Polymer Adhesive 180 Peel Adhesion (PSI) (*90 Peel adhesion) DynamicTensile Strength (PSI) Dynamic Shear Strength (PSI) Temperature Core color Liner Density Thickness Fine Line MaskingTape -Extremely flexible -PVC Film -Rubber adhesive -Temp. Resistance-302˚F -No shrinkage -Easy to remove -Conformable -Die-cuttable GENERAL GASKETING THERMAL MANAGEMENT GENERAL GASKETING ELECTRICAL INSULATORS HIGH-TEMPERATURE GASKETING WINDOW AND GLAZING TAPES SPECIALTY PRODUCTS BONDING BONDING & SPECIALTY TAPES P-Foam PVC Foam 4# (4-25lb) .7 to .9 8% 15 (PSI) Pass -15F to 160F *UL94 HBF .0625” to .500” GAP FILLER-R10404 Thermally conductive silicone n/a Silicone or Acrylic 1.0 to 6.0 (DOC) .30 to .65 (DOC) 100 V-1* 32 to 250 MILS 4790-92 Urethane 15# 2 <2% 15 (PSI) n/a -40F to 194F UL50 & UL508 .125” to .500” GE-FR700 Lexan .28 (*ISO 62) 1,500 V0* .010” .010” to .017” 115C Thermalbond™ V2100 Urethane .125” to .500” 31 35 31 to compress 10% 2000 Gray or Black Structural Glazing Type Adhesive Gauge Film Type Colors Market Protective Films Water & Solvent Based Acrylic 1.2 to 10 Mil PE, PP, PET, Clear, Blue,Yellow, Green, Opaque, Black & White Automotive, Construction, Metal, Laminates, Optical Top Material Bubble Material Foil Bubble Foil / Film 1.8 mil Polyethylene 2 mil *DOC-Depends on Compression Force Type Adhesive Thicknesses Material Coefficient of friction Lo-Skid Material Acrylic .016” to .125” Urethane 1.1 Type Adhesive Total Thickness Specification Conspicuity Tape Pressure Sensitive .008” DOT-C2 Type Foam Foam Density Scrim Coating Scrim Foam .060” Polyethylene 1lb Woven Polyethylene 1.2 mil Polyethylene w/ UV additives Type Material Density shown (range) Temperature Thickness range Film Compression Set % loss of orig. height PVC Mylar V744M 9# (4-15lb) .15F to 160F .0625” to .375” Mylar 8% Ceramic Fiber Paper Alumina Silicate fibers 10-13# n/a n/a 75-90 PSI n/a 2012F UL94 V0 .0312” to .250” Z545-Automotive Urethane Acrylic 6.75 lb/in width 130 NTP-11 120 NTP-5 -40F to 200F Black Poly-Blue 30 lb/ft 3 .045” A3230 Acrylic Acrylic *10 lb/in width n/a 40 ASTM D-3163 -30F to 200F Clear Poly-Blue n/a .118” 4216-SE NEOPRENE-EPDM-SBR 5-7# 5-9 n/a 50 (PSI) Pass -40F to 158F UL94 HBF & HF1 .0625” to 1.75” Thermally Conductive Fabric TF1879-Silicone coated Fiberglass Optional-silicone or acrylic .29 1.2 3500 UL 94 V-0 9.0 MILS 4701-41 Urethane 15-30# 5-40 <5% 40-120 (PSI) n/a -40F to 194F *UL50 & UL508 .031” to .500” Formex™GK10 Polypropylene .06% 2,200 V0 & VTM-0 .010” .005” to .040” 106C to 115C Thermalbond™ V2200 Urethane .125” to .375” 22 30 16 2000 Black Structural Glazing HT-800 Silicone 22# 9 (PSI) ASTM-D1056 5% ASTM D-1056 45 (PSI) ASTM D-375 Pass -67F to 392F UL94 V0 (*HF1) .0312” to .500” 3M™ PT 1100 Automotive Acrylic Acrylic 20lb/in (*90˚ Peel) 90 (PSI) n/a -40F to 250F Black Red-GL-1 Poly 37 lb/ft 3 .045” V28120 Urethane Acrylic 13 lb/in width 75 NTP-11 100 -40F to 200F Black Poly-Blue 30 lb /ft 3 .120” 4114-E EPDM Sponge 4.5-7 # 2-5 (PSI) n/a 60 (PSI) Pass -90F to 275F n/a .0625” to 1.75” Thermally ConductiveTape C695-graphite tape n/a Thermally Conductive Acrylic .12 2.0 Non-insulating --- 6.0 MILS EG416 Polyolefin 4# n/a n/a 280% @ 50 (PSI) AAMA 2.18 n/a -40F to 160F n/a .063” to .250” Nomex™ 410 Aramid Paper .1% 430-1600 V0* .010” .002” to .030” 220C V990 PVC .0625” to .250” 15 n/a 8.9 (*30% PSI) n/a Black, Gray, White Window Glazing R10400 Medium Silicone 35# 10 (PSI) ASTM-D1056 10% ASTM D-1056 100 (PSI) ASTM D-412 Pass -100F to 500F UL94 V0 (*HF1) .0625” to .500” 3M VHB™ 4951-Industrial Acrylic Acrylic 18lb/in (*90˚ Peel) 110 lb/in 2 2 80 lb/in 2 2 200F White Clear Polyester 50 lb/ft 3 .045” 4965 Transfer Tape PET Acrylic 5.625 lb/in width 11.4 lbs/in n/a 176F (max) Clear PET Carrier & PP liner n/a .008” EPDM EPDM Solid 80 Duro n/a 25% (ASTM D395B) 1500 (PSI) Pass -40F to 240F n/a .0156” to 1” 3M™ 433 High Temp. Foil Tape n/a Silicone -65F to 600F (*Temperature Range) n/a n/a F.A.R. 25.853(a) 3.6 MILS Ether Polyether 2# n/a 10% n/a SAEJ-369(b), FAR.853(B) -45F to 228F UL 94 HF1 .125” to 2.0” Fishpaper Vulcanized Fibre Paper 50% 250 UL E-31556 (M) .030” .010” to .062” 110C V1520 PVC .063” to .500” 15 *40 (Shore OO) ASTM D2240 *7 PSI (ASTM-1667-25%) 1000 grams for 10 days Black AAMA 810.1-92 Cequin-3M™ Inorganic Paper 1% ASTM D-644 1-9.2KV (ASTM-D149) UL 1446 .010” .005” to .060” 220C 3M™ VHB™ WindowTape Acrylic core & Adhesive .045” 45 lb./ft 3 110 lb/in 2 (Dynamic tensile) n/a 70lb/in 2 (*dynamic shear PSI) Black or Gray Muntin bar tape MF Siltec-LD Silicone 9.5-11# .8 (PSI) ASTM-D1056 5% ASTM D-1056 15 (PSI) ASTM D-412 n/a -67F to 392F FAR 25.853 para (a-1) .125” to 1.0” 3M VHB™ 4959-Industrial Acrylic Acrylic 20 lb/in (*90˚ Peel) 75 lb/in 2 2 55 lb/in 2 2 300F White Clear PET or Red PE 45 lb/ft 3 .120” All Foam Materials arevavailable with a variety of adhesive systems. *Items noted with an asterick were tested using a different specification. See individual product bulletin for details. Purchaser and/or the end user of the product, assumes the risk of determining the suitability of use for this product. Purchaser and/or end user assumes all risk and liability whatsoever in connection with the use of the product sold herein.
Transcript of GENERAL THERMAL GASKETING MANAGEMENT GENERAL … · 2020. 7. 7. · Muntin bar tape MF Siltec-LD...
MaterialPolymerDensity Shown (range)Compression Deflection (PSI) ASTM D-1667Compression Set % loss of orig. height ASTM D-1667Tensile Strength- ASTM D412Flammability MVSS302 (*Gauge Specific)TemperatureUL (*Gauge Specific)Thickness Range
TypeMaterialReinforcementAdhesiveThermal Impedance (C in.2/W) ASTM E1530Thermal Conductivity (W/MK) ASTM E1530Dielectric Strength (volts/mil)UL (*gauge specific)Thickness
MaterialPolymerDensity Shown (range)Compression Deflection (PSI)Compression Set % Tensile Strength (*AAMA 2.18)Flammability MVSS302 (*Gauge Specific)TemperatureUL (*Gauge Specific)Thickness
TypeMaterialWater Absorption % ASTM D570Dielectric Strength (volts/mil)UL (*gauge specific) ThicknessThickness availabilityTemperature
MaterialPolymerDensity Shown (range)Compression Deflection Compression Set % loss Tensile StrengthFlammability MVSS302 (*Gauge Specific)Temperature Range (constant)UL (*Gauge Specific)Thickness
TypeMaterialThickness RangeDensity lbs/ftHardness Shore A (*Change)Force to Compress 10% PSI (*Change)Static Shear Adhesion Hours (*Change)ColorMarket
MaterialCore PolymerAdhesive180° Peel Adhesion (PSI) (*other testing methods)Tensile Strength (PSI)Dynamic Shear Strength (PSI)Temperature Foam colorLinerDensityThickness
MaterialCore PolymerAdhesive180 Peel Adhesion (PSI) (*90 Peel adhesion) Dynamic Tensile Strength (PSI) Dynamic Shear Strength (PSI)TemperatureCore colorLinerDensityThickness
Fine Line Masking Tape-Extremely flexible -PVC Film-Rubber adhesive-Temp. Resistance-302˚F-No shrinkage-Easy to remove-Conformable-Die-cuttable
GENERALGASKETING
THERMALMANAGEMENT
GENERALGASKETING
ELECTRICAL INSULATORS
HIGH-TEMPERATUREGASKETING
WINDOW ANDGLAZING TAPES
SPECIALTY PRODUCTSBONDING
BONDING &SPECIALTY TAPES
P-FoamPVC Foam4# (4-25lb).7 to .9 8%15 (PSI)Pass-15F to 160F*UL94 HBF.0625” to .500”
GAP FILLER-R10404Thermally conductive silicone n/aSilicone or Acrylic1.0 to 6.0 (DOC).30 to .65 (DOC)100V-1*32 to 250 MILS
4790-92Urethane15#2<2%15 (PSI)n/a-40F to 194FUL50 & UL508.125” to .500”
GE-FR700Lexan.28 (*ISO 62)1,500V0*.010”.010” to .017”115C
Thermalbond™ V2100Urethane.125” to .500”313531 to compress 10%2000Gray or BlackStructural Glazing
TypeAdhesiveGaugeFilm TypeColors
Market
Protective FilmsWater & Solvent Based Acrylic 1.2 to 10 MilPE, PP, PET, Clear, Blue, Yellow, Green, Opaque, Black & WhiteAutomotive, Construction, Metal, Laminates, Optical
Top MaterialBubble Material
Foil BubbleFoil / Film 1.8 milPolyethylene 2 mil
*DOC-Depends on Compression Force
TypeAdhesiveThicknessesMaterialCoefficient of friction
Lo-Skid MaterialAcrylic.016” to .125”Urethane1.1
TypeAdhesiveTotal ThicknessSpecification
Conspicuity TapePressure Sensitive.008”DOT-C2
TypeFoamFoam DensityScrimCoating
Scrim Foam .060” Polyethylene 1lbWoven Polyethylene1.2 mil Polyethylene w/ UV additives
TypeMaterialDensity shown (range)TemperatureThickness rangeFilmCompression Set % loss of orig. height
PVC MylarV744M9# (4-15lb).15F to 160F.0625” to .375”Mylar8%
Ceramic Fiber PaperAlumina Silicate fibers10-13#n/an/a75-90 PSIn/a2012FUL94 V0.0312” to .250”
Z545-AutomotiveUrethaneAcrylic6.75 lb/in width130 NTP-11120 NTP-5-40F to 200FBlackPoly-Blue30 lb/ft3
.045”
A3230AcrylicAcrylic*10 lb/in widthn/a40 ASTM D-3163-30F to 200FClearPoly-Bluen/a.118”
4216-SENEOPRENE-EPDM-SBR5-7#5-9n/a50 (PSI) Pass-40F to 158FUL94 HBF & HF1.0625” to 1.75”
Thermally Conductive FabricTF1879-Silicone coatedFiberglassOptional-silicone or acrylic.291.23500UL 94 V-09.0 MILS
4701-41Urethane15-30#5-40<5%40-120 (PSI)n/a-40F to 194F*UL50 & UL508.031” to .500”
Formex™GK10Polypropylene.06%2,200V0 & VTM-0.010”.005” to .040”106C to 115C
Thermalbond™ V2200Urethane.125” to .375”2230162000BlackStructural Glazing
HT-800Silicone22#9 (PSI) ASTM-D10565% ASTM D-105645 (PSI) ASTM D-375Pass-67F to 392FUL94 V0 (*HF1).0312” to .500”
3M™ PT 1100 AutomotiveAcrylicAcrylic20lb/in (*90˚ Peel)90 (PSI)n/a-40F to 250FBlackRed-GL-1 Poly 37 lb/ft3
.045”
V28120UrethaneAcrylic13 lb/in width75 NTP-11100 -40F to 200FBlackPoly-Blue30 lb /ft3
.120”
4114-EEPDM Sponge4.5-7 #2-5 (PSI)n/a60 (PSI) Pass-90F to 275Fn/a.0625” to 1.75”
Thermally Conductive TapeC695-graphite tapen/aThermally Conductive Acrylic.122.0Non-insulating---6.0 MILS
EG416Polyolefin4#n/an/a280% @ 50 (PSI) AAMA 2.18n/a-40F to 160Fn/a.063” to .250”
Nomex™ 410Aramid Paper.1%430-1600 V0*.010”.002” to .030”220C
V990PVC.0625” to .250”15n/a8.9 (*30% PSI)n/aBlack, Gray, WhiteWindow Glazing
R10400 MediumSilicone35#10 (PSI) ASTM-D105610% ASTM D-1056100 (PSI) ASTM D-412Pass-100F to 500FUL94 V0 (*HF1).0625” to .500”
3M VHB™ 4951-IndustrialAcrylicAcrylic18lb/in (*90˚ Peel)110 lb/in2 280 lb/in2 2200FWhiteClear Polyester50 lb/ft3
.045”
4965 Transfer TapePETAcrylic5.625 lb/in width11.4 lbs/inn/a176F (max)ClearPET Carrier & PP linern/a.008”
EPDMEPDM Solid80 Duro n/a25% (ASTM D395B)1500 (PSI) Pass-40F to 240Fn/a.0156” to 1”
3M™ 433High Temp. Foil Tapen/aSilicone-65F to 600F (*Temperature Range)n/an/aF.A.R. 25.853(a)3.6 MILS
EtherPolyether2#n/a10%n/aSAEJ-369(b), FAR.853(B)-45F to 228FUL 94 HF1.125” to 2.0”
FishpaperVulcanized Fibre Paper50%250UL E-31556 (M).030”.010” to .062”110C
V1520PVC.063” to .500”15*40 (Shore OO) ASTM D2240*7 PSI (ASTM-1667-25%)1000 grams for 10 days
BlackAAMA 810.1-92
Cequin-3M™Inorganic Paper1% ASTM D-6441-9.2KV (ASTM-D149)UL 1446.010”.005” to .060”220C
3M™ VHB™ Window TapeAcrylic core & Adhesive.045”45 lb./ft3
110 lb/in2 (Dynamic tensile)n/a70lb/in2 (*dynamic shear PSI)Black or GrayMuntin bar tape
MF Siltec-LDSilicone9.5-11#.8 (PSI) ASTM-D10565% ASTM D-105615 (PSI) ASTM D-412n/a-67F to 392FFAR 25.853 para (a-1).125” to 1.0”
3M VHB™ 4959-IndustrialAcrylicAcrylic20 lb/in (*90˚ Peel)75 lb/in2 255 lb/in2 2300FWhiteClear PET or Red PE45 lb/ft3
.120”
All Foam Materials arevavailable with a variety of adhesive systems.
*Items noted with an asterick were tested using a different specification.
See individual product bulletin for details. Purchaser and/or the end user of the product, assumes the risk of determining the suitability of use for this product. Purchaser and/or end user assumes all risk and liability whatsoever in connection with the use of the product sold herein.
Rewind Slitting
ISO 9001:2000113 Swett Avenue, Americus GA 31709 P 800.226.1863 F 229.928.2537
Spooling
Assembly Custom Sewing
CustomFabricatedSolutions
ww
w.u
sa-tsg.co
mC
usto
m Fab
ricated S
olu
tion
s
Capabilities
Additional Capabilities
Suppliers
Lathe SlittingLaminating
Flat-Bed Die Cutting
ExtrusionsSonic Welding
Kanban Programs
Die-Cutting Rotary Die-Cutting
![Specification...Original Properties Tensile Strength, psi (MPa) ASTM D638 1,500 (10.34) Min. (after conditioning Tensile Stress, psi (MPa) ASTM D638 500 (3.45) Min. at 100ºF [37ºC]](https://static.fdocuments.in/doc/165x107/612910692aee8938e12dd1fe/specification-original-properties-tensile-strength-psi-mpa-astm-d638-1500.jpg)
