Post on 10-Mar-2016
description
153-165 Bridge Street, Northampton NN1 1QGt: 01604 828600 f: 01604 633159 e: sales@gemco.co.uk www.gemco.co.uk
PRODUCT GUIDE
MOT ATLVEHICLE TESTING STATIONTHE DEPARTMENT OF TRANSPORT
APPROVED BY
MOT & ATL LIFTS FROM 4 - 6.5 TONNE
4024-43 (4024BS) Class 4 ATL Lift, 4 tonne with 4260mm platforms (narrow version)
4026-43 (4026BS) Class 4 ATL Lift, 4 tonne with 4260mm platforms
4026-47 (426BL) Class 4 ATL Lift, 4-tonne with 4680mm platforms
4030-54 (430BL) Class 4 & 7 ATL Lift, 4-tonne with 5350mm platforms
5230-60 Class 4 & 7 ATL Lift, 5.2 tonne with 6000mm platforms
6530-60 Class 4 and 7 ATL Lift, 6.5 tonne with 6000mm platforms
5230-54 Class 4 & 7 ATL & Wheel Alignment Lift with 5350mm platforms and slip plates
ATL Lift with jacking beam and LED lighting kits Jacking beams fitted to Stenhøj ATL lift
ATL Bay with Stenhøj 4 tonne lift (model 4026-47)
STENHØJ MAJOR MOT LIFTSStenhøj Major MOT & ATL lifts are CE approved and feature robust recessed turnplates (MOT Models) and pneumatic play detectors (ATL Models). Stenhøj products are designed and built to give years of service! Lifts can either be surface mounted or recessed and drive through.
4024-43 Class 4 MOT Lift, 4 tonne with 4260mm platforms (shallow recess model)
4026-42 Class 4 MOT Lift, 4 tonne with 4180mm platforms
5230-51 Class 4 & 7 MOT Lift, 4 tonne with 5100mm platforms
* SUBJECT TO PROOF OF MAINTENANCE CONTRACT
STENHØJ MAJOR MOT LIFTS
GEA
MOT ATLVEHICLE TESTING STATIONTHE DEPARTMENT OF TRANSPORT
APPROVED BY
JACKING BEAMS FOR MOTWe supply UK manufactured jacking beams which are available as either manual or air operated. All jacking beams are fully approved for MOT testing purposes. We can supply models in either 2 tonne (class 4) or 2.8 / 4 tonne (class 4 & 7).
In addition to jacking beams supplied for our own lifts, we can also supply jacking beams for many other lifts. A full range of accessories are also available including steel and rubber raiser blocks and air kits.
LIGHTING KITS FOR LIFTSWe can offer LED lighting kits with magnetic fixings in 1.6m tube lengths. These IP54 rated, energy-efficient lights are brighter than fluorescent tubes, very sturdy and are guaranteed for 10 years!
Stenhøj ATL Lift in 130mm purpose built recess 2 tonne air operated jacking beam
Class 4 & 7 ATL Scissor Lift with 5 tonne lifting capacity
ATL SCISSOR LIFTS We offer a range of MOT and ATL Scissor lifts to suit both class 4 & 7 MOT applications. We can offer these models with wheel alignment capability and integral scissor lifting mechanisms. ATL Scissor lifts are the ideal choice for narrow width bays and can be surface mounted or recessed.
GEM4ATL Class 4 ATL Scissor Lift, 4.5 tonne with 4500mm platforms
GEM5ATL Class 4 & 7 ATL Scissor Lift, 5 tonne with 5200mm platforms
Trust the no. 1 Supplier of MOT Bays in the UK...
A www.gemco.co.uk
PLAY DETECTORS & HEADLAMP ALIGNERS
STENHØJ PLAY DETECTORSStenhoj pit play detectors are pneumatically operated and are VOSA Approved for MOT testing purposes.
STENPD Class 4 & 7 pit play detectors with 7.5 tonne drive over axle load and a stationary axle load of 3 tonnes
Wired remote control with torch for operation
Supplied with friction checker plate for opposite side of pit
Can be fitted either side of the pit (depending on location of control box)
SHERPA PLAY DETECTORSSherpa pit play detectors are hydraulically operated and are VOSA Approved for MOT testing
Stenhøj handlamp for operation of play detectors Sherpa remote control handlamp
Stenhøj pit play detectors and turnplates Sherpa AS2 play detectors
SHERPA AS2 Class 4 & 7 pit play detectors with 7.5 tonne drive over axle load and a stationary axle load of 4 tonnes
Wireless remote control with torch for operation
Supplied with friction checker plate for opposite side of pit
Can be fitted either side of the pit (depending on location of control box)
MOT TURNPLATESFor MOT testing on a pit, a set of turnplates are required. We can supply heavy duty bearing turnplates for this purpose.
RP9014 MOT approved class 4 & 7 heavy duty turnplates
EQTP1 MOT approved class 4 & 7 heavy duty turn plates which can be used in pit where trucks and buses are also serviced
GEA
MOT ATLVEHICLE TESTING STATIONTHE DEPARTMENT OF TRANSPORT
APPROVED BY
Quality Equipment built to last...
Litecheck2 with 3m of recessed rails Laser unit as fitted to Litecheck DL models
GEMCO Litecheck4 double laser with 3m of rails PLA25AL MOT headlamp aligner
GEMCO HEADLAMP ALIGNERSAll headlamp aligners supplied by GEMCO are VOSA Approved for MOT testing purposes!
DUNLOPLITECHECK2 Headlamp aligner with 3 metres of rails (yellow RAL1018)
GEMCOLITECHECK4 Headlamp aligner with 3 metres of rails (red RAL3013)
GEMCOLITECHECK4DL Dual Laser headlamp aligner with 3 metres of rails (red RAL3013)
Rails can be surface mounted or recessed. Units can also be supplied in special colours made to order.
Additional rail sections (3240018) are also available in 1.5m sections.
LET HEADLAMP ALIGNERSL.E.T. Automotive is a market leading, worldwide supplier of headlamp aiming systems. It develops state-of-the-art light sensor technology.
PLA25AL Advanced, electronic headlamp aligner with 2.5m of surface mounted HD rails
Complete with RS232 port for data
Comes as standard with protective dust cover
VOSA Approved for MOT testing purposes
A VGA output, VGA screen, ticket printer (serial or bluetooth) and laser aligner are also available as optional extras
A www.gemco.co.uk
WHAT ARE OPTL AND ATL?In 2006 the option to install ‘Automated Test Lanes’ was introduced by VOSA. Existing MOT stations could then simultaneously upgrade their equipment and reduce labour costs by using one person. The additional equipment required was a lift or pit with a play detector, pedal depressor and a pair of convex MOT mirrors (OPTL).
All new MOT applications wishing to ‘One Person Test’ are now required to go full ATL. This also includes a computerised brake tester with weigh scales in addition to the items required for OPTL. Traditional ‘2 Person’ MOT testing with the appropriate equipment continues, and new sites may still apply for this.
GEMCO Equipment Ltd has over thirty years experience in providing MOT bays for independent garages, franchised dealers and fast-fits throughout the UK.
INSTALLATION FINANCE
From the moment the equipment is delivered to your site on vehicles with offloading facilities, we will install speedily and efficiently. It is our goal to deliver and install on time so you may maximise your revenue.
We will of course provide all necessary certification for you to obtain your VOSA approval.
We are able to offer competitive lease packages via reputable finance companies over 1-5 year periods. Lease packages can also include maintenance and extended warranty packages.
INSTALLATION FINANCE
Are you looking for a new ATL/MOT bay?
We have over 30 years of expertise in the MOT market, so call us and we will arrange a FREE site visit and survey.
Our CAD office can produce detailed layout plans for submission to VOSA for your MOT approval. We are fully acquainted with all the current regulations!
We can offer a total solution for your MOT bay! We work with our authorised and fully qualified sub-contractors, who will carry out all necessary site works.
Our builders will cut recesses and ducts for lifts, brake testers and headlight testers. Our NICEIC electricians will provide all the required electrical supplies and connection for your new equipment.
Alternatively, we are pleased to provide the information for you to pass on to your contractors.
SURVEY AND DESIGN CIVIL WORKS AND ELECTRICS
W ff t t l l ti f MOT b ! W k
CIVIL WORKS AND ELECTRICS
A l ki f ATL/MOT b ?
SURVEY AND DESIGN
CONCEPTION TO COMPLETION GEA
MOT LAYOUT CLASS 4 & 7 ATL
MOT ATLVEHICLE TESTING STATIONTHE DEPARTMENT OF TRANSPORT
APPROVED BY
Contact us now for a free site surveyand for your VOSA application drawings!
Headlight tester
Play detector
Jacking beam
ATL lift
Brake tester
A www.gemco.co.uk
PC Screen showing brake tester software
VEHICLE TESTING STATIONTHE DEPARTMENT OF TRANSPORT
APPROVED BY
MOT & ATL BRAKE TESTERS
BM AUTOTEKNIK MOT & ATL BRAKE TESTERSBM is one of the leading manufacturers of brake testers in the world and provide hi-tech equipment for all classes. All the latest ATL equipment is controlled by a PDA and either the PC on a gas analyser or a separate PC. VOSA and GEA engineers visited the BM factory to gain approval for their ATL Brake testers. These computerised brake testers automatically guide the operator through the test and by using the weigh scales calculate brake efficiency.
MOT BRAKE TESTERSBM7010 Class 4 MOT brake tester with twin beds. Recess size 2 x 965mm (l) x 855mm (w) x 250mm (h)
Retrofit frames for the BM7010 are available to suit the Crypton 660 and the Kismet 1300.
BM9010 Class 7 MOT brake with twin beds. Recess size 3230mm (l) x 790mm (w) x 495mm (h)
ATL BRAKE TESTERSBM4010-4 Class 4 ATL brake tester single bed. Recess size 2330mm (l) x 635mm (w) x 285mm (h)
BM4010-7 Class 4 & 7 ATL brake tester single bed. Recess size 2330mm (l) x 635mm (w) x 285mm (h)
BM9010ATL Class 4 & 7 ATL brake tester single bed. Recess size 3230mm (l) x 790mm (w) x 495mm (h)
Class 4 MOT Brake Tester PDA for operation of roller brake tester
Brake Tester software loaded onto PC of gas analyser BM9010ATL Class 4 & 7 ATL Brake Tester
GEA
MOT ATLVEHICLE TESTING STATIONTHE DEPARTMENT OF TRANSPORT
APPROVED BY
Quality Equipment built to last...
PC with ATL Software on DUNLOP ATL Brake Tester Sherpa BPS Kompact 3.5 ATL Brake Tester
Motorcycle MOT Bays and upgrades are available Software can be loaded onto a PC or emission analyser
DUNLOP ATL BRAKE TESTERSDunlop brake testers are manufactured in Spain to UK Specification and are fully VOSA Approved for MOT testing and can also include motorcycle testing.
DRBTATL4 Class 4 ATL brake tester single bed. Recess size 2360mm (l) x 720mm (w) x 290mm (h)
DRBTATL7 Class 4 / 7 ATL brake tester single bed. Recess size 2970mm (l) x 720mm (w) x 290mm (h)
SHERPA MOT & ATL BRAKE TESTERSSherpa is a German based brake tester manufacturer, and like GEMCO, is also part of the Stenhøj Group. Sherpa have been producing roller and plate brake testers for car and commercial vehicles since 1993 and are one of the leading manufacturers worldwide as a result of their knowledge and commitment to quality. VOSA Approved for MOT Testing.
BPS Kompakt 3.5 MOT Class 4 brake tester. Recess size 2320mm (l) x 680mm (w) x 240mm (h).
BPS Kompakt 6.0 MOT Class 4 & 7 brake tester. Recess size 2925mm (l) x 680mm (w) x 240mm (h).
BPS Kompakt 3.5 ATL Class 4 brake tester. Recess size 2320mm (l) x 680mm (w) x 240mm (h).
BPS Kompakt 6.0 ATL Class 4 & 7ATL brake tester. Recess size 2925mm (l) x 680mm (w) x 250mm (h).
A www.gemco.co.uk
EMISSION ANALYSERS
All equipment is fully approved for Class 4 and 7 MOT testing to the latest VOSA specifications. We will be pleased to arrange free demonstrations for all emission analysers at your site!
A wide range of accessories are available for all emissions units including wireless control, RPM adaptors and probe kits for trucks and buses.
GAS AND SMOKE EMISSIONS EQUIPMENTMENT
BOSCH BEA850 Cabled combined gas and smoke analyser unit.
The BOSCH BEA850 emission analyser comes as standard with a 17” TFT monitor, remote control and printer with cover. The units can be easily upgraded for diagnostics with a KTS module (optional extra).
Specially designed oil temperature probe included
1 OM2500/COM OMITEC OmiEmissioncenter combined gas and smoke analyser.
OM2500/PCG OMITEC Gas analyser with PC and trolley.
Omitec emission analysers as standard come with 17’’ flatscreen pc display units and printer.
The above units are housed in rugged, purpose built trolleys.
2
2
BOSCH BEA850 1
OMITEC OM2500/COM 2
GEA
MOT ATLVEHICLE TESTING STATIONTHE DEPARTMENT OF TRANSPORT
APPROVED BY
Comprehensive extended warranty service packages available...
CRYPTON CCP700/DSP700Bluetooth and cabled combined gas and smoke analyser / smoke analyser unit.
CCP700-B-EN560 Bluetooth combined unit
CCP700-C-EN560 Cabled combined unit
DSP700-B-EN500 Bluetooth diesel smoke analyser
DSP700-C-EN500 Cabled diesel smoke analyser
All units are PC based and are supplied with trolleys.
3 BOSCH BEA350 Cabled combined gas and smoke analyser unit (Non-PC Based)
The BOSCH BEA350 emission analyser is a processor based machine which is fully approved for MOT testing and easy to use.
The unit also features a brilliant colour TFT screen and an integrated thermal printer.
4 OMITEC OM1500 The OmiSmoke diesel emission tester, which is Cat A and B approved, is a hand-held smoke meter with integrated thermal printer built into the handset.ACCESSORIES
OM1500/9Commercial Vehicle Probes.
OM1500/16 Vertical stack exhaust probes.
5
CRYPTON CCP700 3
BOSCH BEA350 4
OMITEC OM1500 5
A www.gemco.co.uk
FS 23808
153-165 Bridge Street, Northampton, NN1 1QG, United Kindomt: 01604 828600 f: 01604 633159 e: sales@gemco.co.uk www.gemco.co.uk GEA
Pictures are for illustration purposes only, we reserve the right to change specifications, dimensions, etc without prior notice. All rights reserved.
PROFESSIONAL SITE SURVEYS FOR ALL YOUR CAD DESIGNS AND VOSA DRAWINGS THE LARGEST DISTRIBUTION CENTRE FOR GARAGE EQUIPMENT IN THE UK SITE
DELIVERIES EVERY WEEK TOP QUALITY STENHØJ 4-POST LIFTS THE BEST PLAY DETECTORS ON THE MARKET BM BRAKE TESTERS WITH LEADING-EDGE TECHNOLOGY
BOSCH, OMITEC AND CRYPTON - THE UK MARKET LEADERS IN EMISSIONS EQUIPMENT THE COMPLETE PACKAGE WITH CIVIL AND ELECTRICAL WORKS FULL RANGE OF MOT
ACCESSORIES FINANCE PACKAGES AVAILABLE CALIBRATION AND MAINTENANCE CONTRACTS PROVIDED NATIONALLY LARGEST UK STOCKISTS OF SPARE PARTS
EXPERTS IN THE GARAGE EQUIPMENT INDUSTRY!
Class 4 and 7 ATL bay
Play detectors as fitted to ALL Stenhøj Major ATL
Complete MOT accessories
Stenhøj Major 5230-60 6m ATL Lift - 5.2 tonne
THE NO.1 SUPPLIER OF MOT BAYS IN THE UK!
FEB
2013