Post on 19-Feb-2022
FORTINA originated in April 2009.
In order to meet the needs of many of our customers who "wanted to replace the Japanese streetscapes with richer and more beautiful designs," Toppan, after many years of research, created a highly weather resistant decorative surface material.
Toppan will deliver FORTINA not only to the Japanese market but also worldwide. Toppan will continue to evolve while endeavouring to fulfil the requests for improving streetscapes and spaces around the world making the designs more interesting and beautiful to view.
12
Relazioni - Paola Lenti 2016©Paola Lenti sri - photo by Sergio Chimenti Relazioni - Paola Lenti 2016 54
Louvers
Interior and Exterior—Wall Applications with Stringers
Installation Guide ........................................... 15
Installation Examples ....................................... 16
Interior—Ceiling Applications with Stringers
Installation Guide ........................................... 19
Installation Examples ....................................... 20
Interior—Floor-to-Ceiling Applications
Installation Guide ........................................... 23
Installation Example ........................................ 24
Lighting Louvers
Interior—LED Front Lighting Louver with Stringers
Installation Guide ........................................... 42
Specifications ................................................. 43
Interior—Lighting Duct Louver with Stringers
Installation Guide ........................................... 45
Spandrels [Slats]
Interior and Exterior—Spandrels [Slats]
Installation Guide ........................................... 49
Interior and Exterior—
Wall and Ceiling Applications with Stringers
Louver Profiles ............................................... 26
Back Rail Profiles ........................................... 31
Accessories .................................................. 32
End Caps Installation .............................................. 33
Interior—Wall and Ceiling Direct Applications
Installation Guide ........................................... 35
Installation Examples ....................................... 36
Louver Profiles ............................................... 38
Profiles ......................................................... 50
Accessories .................................................. 51
Installation Examples ....................................... 52
Colours and Patterns
For Interior ............................................................ 53
For Exterior ........................................................... 56
Aluminum Surface Treatment..................................... 57
Technical Information
Decorative Sheet Performance Data ........................... 58
Contents
1110
丸いのに変更
Louvers originally used for blinds, creating shade, or ventilation are now seeing an increase in demand as design material.FORTINA can fulfil a variety of customer needs in a wide range of applications that differ from conventional ones through a variety of designs and shapes, as well as improvements in the quality of component parts such as end caps. Louvers are available for Direct attachment type and Stringer attachment type.
Louvers
1312
1
2
3
Vertical Installation
Horizontal Installation
Interior and ExteriorWall Applications with Stringers / Installation Guide
1514
30.6
30
.6
10
350
350
STRI
NGER
SPA
CING
STANDARD LOUVER SPACING
LOUV
ER L
ENGT
HLO
UVER
LEN
GTH
STRI
NGER
SPA
CING
Elevation
60 60 90 90 90 90
60
70
10
L-BRACKETBTS-5050
THS-3060
CLIPSBTP-17
M12×30
STAL-5STRINGER
Cross Section A–A’
Cross Section B–B’
350
350
STRI
NGER
SPA
CING
STRI
NGER
SPA
CING
LOUV
ER L
EGNT
HLO
UVER
LEG
NTH
10
BTP-17
BTS-5050
C-ANGLE BY OTHERS
M12×30 STAL-5
BTP-17
STAL-6
60 70 10
12
12
30.6
30.6
L-BRACKET
CLIP
STRINGER
STRINGER
CLIP
THS-3060
30 30 30
A‘A
B
B’
Elevation
Cross Section A–A’
Cross Section B–B’
1212
40
7010
30.6 30.6
10
BTS-5050
BTP-17
L-BRACKET
CLIP CLIP CLIPBTP-17 BTP-17
BTS-5050 L-BRACKET
M12×30
M12×30
THS-4040
STAL-6STRINGER
STAL-5STRINGER
STRINGER SPACING STRINGER SPACING
LOUVER LENGTH LOUVER LENGTH
350 350
10
30.630.6STRINGER SPACING STRINGER SPACING 350
350
350
350
LOUVER SPANLOUVER SPAN
STRINGER-TO-WALL ATTACHMENT POINT
STAN
DARD
LOU
VER
SPAC
ING
40
40
8080
80
40 70 10
THS-4040STRINGERSTAL-5
CLIPBTP-17
BTS-5050
M12×30
L-BRACKET
C-ANGLE BY OTHERS
40
40
40
40
B‘B
A
A’
Vertical Horizontal
LOUVER PROFILES AND INSTALLATION GUIDE Interior and ExteriorWall Applications with Stringers / Installation Examples
1716
Elevation
Cross Section A–A’
Cross Section B–B’
LOUVER LENGTH
STRINGER
20
50
12
25
12 12 95.2
63
63
50 50
30
50
10
30
20
10 10
20
10
2 10
30.6 30.6
SUS M12×30
SUS M12×30
HANGING RODHANGING ROD
STRINGERSTAL-7
L-BRACKETBTS-5050
L-BRACKETBTS-5050
CLIPBTP-09
CLIPBTP-09
350
10
350
STRINGER SPAN
STAL-8
END CAP
SHS-
2010
FT
100
50
100
10 10
2 10
10
10 35
030
.6
30.6
ST
RING
ER S
PACI
NG
END CAPS
SHS-2010FT
STRINGER
STAL-8
STRINGER
STAL-7
10
10
120 120 120 55
100 100
100
1050
4520 20 20
9.2
THS-2010
350
< 350
350ROD SPACING TBD
L-STRINGER10
SUS M12×30STRINGERSTAL-7CLIP
BTP-09
L-BRACKETBTS-5050
HANGING ROD BY OTHERS
10 mm SPACE FROM WALL TO EDGE OF STRINGER
THS-2010
A‘A
B
B’
Elevation
@90
0 @
900
STRINGER
STCL-1
B B‘
A
A’
LOUVER LENGTH
350 @2000
Cross Section A–A’
P
M8×20 8015
STRINGERSTCL-1
40
5550
100
15P P P
BOLTBTP-M620
L-BRACKETBTS-4080ST
TLBS-1510
HANGING ROD BY OTHERS
Cross Section B–B’
2END CAPSLBS-1510FT
BOLTBTP-M620
805550
100
15
M8×20
HANGING ROD BY OTHERS
L-BRACKETBTS-4080ST
STRINGERSTCL-1
350
TLBS-1510
LOUVER PROFILES AND INSTALLATION GUIDE Interior Ceiling Applications with Stringers / Installation Examples
With STAL Stringer With STCL Stringer
2120
Elevation
Cross Section A–A’
Cross Section B–B’
CEILING
FLOOR
CEIL
ING
HEIG
HT
1010
FLAT BAR BRACE
(OPTIONAL)
152
150
2
200 200 200
150 150 150
BACK RAIL
SCREW FOR BACK RAILL-ATTACHMENT
THS-5015
THBM-50
50 50 50 50
1522
BTP-30
202020
CEILING
FLOOR
FLAT BAR BRACE
150
(OPTIONAL)
10
10
1010
L-ATTACHMENT
L-ATTACHMENT
BACK RAILTHBM-50
IF LONGER THAN 2000 mm NEEDSINTERMEDIATESUPPORT
NOTE: 10 mm space top and bottom for L-Clip thickness.
Notc
h si
ze
THS-5015
CLIP
A A‘
B
B‘
Interior Floor-to-Ceiling Applications / Installation Example
2524
TLBS-1550
THS-2040 THS-2060 THS-2080
SQUARE 15
SQUARE 20
THS-2010 THS-2015
THS-2580THS-2570
100
2025
70 80
25
20
40
20
60
20
80
150
20
SQUARE 25
TLBS-1510
100
15
TLBS-1515
50
15
150
15
Ceiling type for interior only
THSN-3030 THS-3050 THS-3060
THS-4050 THS-4080
50
30
30
30
THS-404050
40
60
30
40
40
80
40
SQUARE 30
SQUARE 40
THS-3075 THS-3080 THS-3010
100
30
80
30
75
30
THS-3015150
30
LOUVER PROFILES AND INSTALLATION GUIDE Interior and ExteriorWall and Ceiling Applications with Stringers / Louver Profiles
2726
SQUARE 50
SQUARE 60
SQUARE 75 SQUARE 100
THSN-5050
THS-50125 THS-5015
THS-6025 THS-6012
THS-7575
THS-5060 THSN-5010
50
50
50
125
50
150
50
60
50
100
75
75
THS-1040 40
100
25
60 60
120
TRAPEZOID
ROUND
TRIANGLE
50
540
5
70 75
100
25
3010
10
50
35
80
35
100
35
120
37
ø40
ø50
45
72
ø75
27.5
ø30
THTR-4070 THL-02
THC-30 THC-40 THC-50
THC-75
THV-3580 THV-3510 THV-3512
LOUVER PROFILES AND INSTALLATION GUIDE Interior and ExteriorWall and Ceiling Applications with Stringers / Louver Profiles
2928
OTHERS
60
20 3080 100
30
30
60
12
10 30
80
12
10 30
100
15
10
40
150
30
15
16.5
50
70
20
80
35
(81)
60°
18.5
26
80
60°
50
(96)
45°
25
100
100
15
120
50
30
THG-3580
THE-2060 THE-3080 THE-3010
THA-1060 THA-1080 THA-1010
THA-1515 THGR-70
THG-5080 THGF-100
THGR-120
DECORATIVE BACK RAILS
THBM-20 THBM-25 THBM-30
THBM-40 THBM-50 THBM-60
20
213
30
213
40
213 218
60
25
213
50
218
THBM-20 THBM-25 THBM-30
20
82
*80 (D) 2
THS-2080 + THBM-20ex.
25
82
*80 (D) 2
THS-2580 + THBM-25ex.
30
82
*80 (D) 2
THS-3080 + THBM-30ex.
THBM-40
THBM-50 THBM-60
THS-4080 + THBM-40ex.
40
82
*80 (D) 2
50
102
*100 (D) 2
THSN-5010 + THBM-50ex. THS-6012 + THBM-60ex.
60
122
*120 (D) 2
*Dimension (D): 40/60/80/100/150
*Dimension (D): 50/60/100/125/150
*Dimension (D): 70/80 *Dimension (D): 30/50/60/75/80/100/150 *Dimension (D): 40/50/80
*Dimension (D): 25/120
Interior and ExteriorWall and Ceiling Applications with Stringers / Louver Profiles
Interior and ExteriorWall and Ceiling Applications with Stringers / Back Rail Profiles
3130
Clips for Attaching Louver to Stringer (Sold in Sets of 20)
STAL-5 STAL-7-40STAL-6
BTP-30BTP-17
STAL-8
BTP-09 BTP-M620
Stringers
Materials: Aluminum ExtrusionRound Shaping: Outer R6000+
Materials: Aluminum ExtrusionRound Shaping: n/a
Materials: Aluminum ExtrusionRound Shaping: Outer R1800+
Materials: Aluminum ExtrusionRound Shaping: Outer R1500+
STCL-1Materials: Aluminum Extrusion
*Interior ceiling only
BTS-M1230BTS-5050 / L-BracketMaterials: Galvanized SteelUsed with STAL 5, 6, 7, 8 Stringer STL: 50×50×4
Stringer Fittings (Sold in Sets of 10)
BTS-4080ST
M12×30 SUS
40
1580
40 18
φ 11
φ 9
Aluminum Aluminum Aluminum
Length
Pa
7
3010
50
1515
3
Length
Length LengthOut R
Length
Materials: Polished Chrome FinishSt=3.2 mmUsed with STCL-1 Stringer
M8×20 ST
1
2
1
2
Screwless End Caps (20/ each) Screw-on End Caps (20/ each)
Grid Types (Square) Grid Types (Square) Grid Types (Round) □□□□ –□□□□ FTS (H)
□□□□ –□□□□ FT (H)
□□□□ –□□□□ FT (H) –φ
□□□□ –□□□□ FT
Countersunk screw M4×12 SUS
Countersunk screw M4×12 SUS
Countersunk screw M4×12 SUS
*H includes back panels
Materials: Aluminum Extrusion t=2.0
* Not available for drain hole * Drain hole
FinishingAluminum Basic Color 6 colors *Datails for page 57
Aluminum Mat Color 6 colors *Datails for page 57
Painted FinishSpecified color of
Japan Painting Contractors Association
Wood Grain Painted Finish
Rusted Effect Painted Finish
There is a possibility that rainwater, etc. may collect inside the louvers. A drain hole of ø 8 mm or more must be cut in the end caps. We are also preparing perforation type, please contact to our sales representative for more details.
*If you use decorative back panel, open a gap of 5 mm or more at the bottom, or open a drain hole on the surface of decorative back panel itself.
Drain hole (ø 8 or more)
One place per a hollow part
Drain hole processing example on the end cap
*This view is looking up from the bottom
Drain hole processing example on materials of inside louver
Drain hole(ø 8 mm or more)
Drain hole(ø 8 mm or more)
5 m
m o
r mor
e
When using it for external vertical installing, please provide a drain hole of ø 8 or more on the lower end caps.
In the case of external vertical installing
End Caps InstallationInterior and ExteriorWall and Ceiling Applications with Stringers / Accessories
3332
1
2
3
Vertical Installation
Horizontal Installation
Interior Wall and Ceiling Direct Applications / Installation Guide
3534
Elevation
Cross Section A–A’
Cross Section B–B’
1
P P P P P P
3030
50
BACK RAIL
ATTACHMENT SCREWTB-440ST
TLKS-3050
W
A
B’
H
B
A’
200
200
22
H
50
1
200
200
WALL ATTACHMENTBY CLIENT
INNER WALL BOARD BY OTHERS
TLKS-3050
C-ANGLE BY OTHERS
END CAPSLKS-3050FT
END CAPSLKS-3050FT
Elevation
Cross Section A–A’
W1 W2
H
A
A’
B B’
200
1
PP
PP
PP
75
30
WALL ATTACHMENTBY CLIENT
BACK PLATE
TLKS-3075
Cross Section B–B’
W1 W2
END CAP
SLKS-3075FT
2 15 15
75
1
C-ANGLE BY OTHERS
TLKS-3075
200
WALL ATTACHMENTBY CLIENT
LOUVER PROFILES AND INSTALLATION GUIDE Interior Wall and Ceiling Direct Applications / Installation Examples
Vertical Horizontal
3736
Others
TLKS-1030
Attachment 100
100
301
Attachment points
TLKTR-1560 TLKTR-1510 TLKTR-1515
15 20
601
15 20
1001
2015
1501
TLKV-3210
32
1001
Attachment 30
Attachment 50
TLKS-4075
Attachment 40
TLKS-3050
TLKS-3015 TLKS-3010TLKS-3075
TLKS-3060 TLKS-3030
TLKS-5010TLKS-5050 TLKS-5060
TLKS-5015
30
75
30
301
30
501
30
601
40
751
1
50
501
50
1501
50
601
30
1001
30
1501
50
1001
Attachment point
LOUVER PROFILES AND INSTALLATION GUIDE Interior Wall and Ceiling Direct Applications / Louver Profiles
3938
With the advent of LED, light is no longer just a means for illumination, it is now being seen as a part of a design that can suit a variety of situations.
By incorporating LEDs into louvers, FORTINA LED invites a new look by providing indirect lighting, whilst retaining the functionality of louvers.
Lighting duct louvers, which integrate louvers with wiring ducts, allow for a clean-look.
Innovative space designs are made possible by adding lighting to louvers.
Lighting Louvers
4140
1
2
3
Light distribution curve Horizontal surface illuminance
LED Type
L=1,000 mm / L=2,000 mm (±4mm) Lead L=500 mmConnector power cable
L=2000 mm
Red (+) : Black (–)
Lighting System | Speci�cations
Speci�cations
– / +180
150
120
90
60
30
0
0
–30
–60
–90
–120
–150
* Refer to "Instruction Manual" for construction.* For details about power supply, refer to "Power supply specifications".* For the trunk cable dimension, confirm "cable selection table".* Please inquire about the special length item other than standard length items.
Light distribution curve Horizontal surface illuminance
LED Type
L=1,000 mm / L=2,000 mm (±4mm) Lead L=500 mmConnector power cable
L=2000 mm
Red (+) : Black (–)
Lighting System | Speci�cations
Speci�cations
– / +180
150
120
90
60
30
0
0
–30
–60
–90
–120
–150
* Refer to "Instruction Manual" for construction.* For details about power supply, refer to "Power supply specifications".* For the trunk cable dimension, confirm "cable selection table".* Please inquire about the special length item other than standard length items.
Pro�le Selection
TLF-4080 TLFU-40 Cover unit
TLFB-19 LED holding component
40 40
19.4
80
15
19.5
Installation Drawings
LED
Center Corner
Pro�le Selection
TLF-4080 TLFU-40 Cover unit
TLFB-19 LED holding component
40 40
19.4
80
15
19.5
Installation Drawings
LED
Center Corner
Profile Selection
Specifications
Light Distribution Curve Horizontal Surface Illuminance Product Specifications
Installation Drawings
TLF-4080 TLFU-40
TLFB-19
Cover unit
LED holding component
Pro�le Selection
TLF-4080 TLFU-40 Cover unit
TLFB-19 LED holding component
40 40
19.4
80
15
19.5
Installation Drawings
LED
Center Corner
Product Name LED Flex Ribbon light 10 LED Flex Ribbon light 10
Product codeRa-F22B-1000-WW Ra-F22B-2000-WW
Ra-F22B-1000-CW Ra-F22B-2000-CW
Voltage DC 24V DC 24V
Power consumption 10.5W 21W
Light primary colorWW (Warm White) : 2725 ± 145K
CW (Cool White) : 4503 ± 243K
LED element Nichia SMD 5050
Material PVC-Ivory White
Luminous flux / m 450 lm / m
IP grade IP 68
IK grade IK 08
Maximum series connection length Less than 10 m
Dimming Yes *
* Refer to Specification Manual
LIGHTING LOUVER PROFILES AND INSTALLATION GUIDE Interior LED Front Lighting Louver with Stringers /Installation Guide
4342
40 33
80
15.5
Track light by others Lighting Duct Louver Cover whereTrack light does not occur.
IMPORTANT: Attaches with U Clips.
Screw-on End Cap is available
1
2
3
IMPORTANT:U-Clips needed to attached TLDU-40 Lighting Duct Cover to Louver
TLD-4080 (Lightng Louver)
TLDU-40 (Lighting Duct Cover)
Interior Lighting Duct Louver with Stringers / Installation Guide
4544
Spandrels [Slats] are used on ceilings and walls but they are also in demand as a product to create innovative large scale designs and continuity.To meet this demand, by combining numerous designs and shapes, FORTINA offers unlimited, coordinated design options.
Spandrels [Slats]
4746
Standard Style with Wood Grain Inside Reveal Standard Style with Aluminum Inside Reveal Flat Style
TRA-100MF
TRA-120MF
1006
11.5 4
+0-0.8
13
3
20
11.5 4
1206 +0-0.8
13
3
20
1370.5
TRA-150MF
11.5 4
1506 +0-0.8
13
3
20
1670.5
t =1.0 mm
t =1.2 mm
t =1.3 mm
Standard Style with 10 mm Reveal Flat Style with No Reveal
TRA-60STTRA-60AL
120
146
15
11.3 4 137.3
3
10
20
11.5 4 13
3
7.5
10015 10
126
20
11.5 4
6015 10
86
20
13
3
7.5
11.4 4
13
3
15015 10
176203
7.4
11.2 4 13
3
20015 10
3226
20
7.2
TRA-100STTRA-100AL
TRA-120STTRA-120AL
TRA-150STTRA-150AL
TRA-200STTRA-200AL
t =1.0 mm
t =1.0 mm
t =1.2 mm
t =1.3 mm
t =2.3 mm
13 mm Height—Profile Selection
TRA- ST TRA- AL TRA- MF *Refer to page 57.
Trims / Edge Treatment
M-16 t =1.2 mm
H Joints
M-64 t =1.2 mm
Hanging Partitions
M-71 t =1.2 mm
M-19-1 t =1.2 mm t =1.2 mm
Exterior Corner Trim
M-70 t =1.2 mm
Interior Corner Trim
M-78
Accessories for 13 mm Height
Corner Trims
M-6 t =1.5 mm M-67 t =1.2 mm
18
15
M-68 t =1.2 mm
40
19
M68
25
5 10
19
6014
579
27
25
14 5
4.7
145
1530 45
15 15
10
145
20
40
143
50.233.2
50.2
33.2
143
15
143
15
14 3
143 25
50
2550
M-69 t =1.5 mm
R75
155
15
100
100
M68
Interior and Exterior Spandrels [Slats] Accessories
Interior and Exterior Spandrels [Slats] Profiles
*Refer to page 57 for the aluminum surface treatment. 5150
JointM-64
13
(25)20
338
19
M-64SPANDREL [SLAT]
Drop Ceiling Detail
M-71, 7815
3153
5
25
27
5
1319
38
131938 1319
38
SPANDREL[SLAT]
SPANDREL[SLAT]
SPANDREL[SLAT]
M-78
M-71
Angle Design Internal Corner
M-67, 68
3819
13
3819
13
25
5
SPANDREL[SLAT]
SPANDREL[SLAT]
M-67
Wall-side Cross Section
M-16 M-19-1
5
15
3819
13
SPANDREL [SLAT]
M-16
15 15
5
M-19-1
SPANDREL [SLAT]
Angle Design External Corner
M-67, 68
1319
38
※10
※ 10100
3819
13
100
25
5
SPANDREL[SLAT]
SPANDREL[SLAT]
M-68 M-67
External Corner
M-68, 69
100
100
5
5
133010
1330
10
SPANDREL[SLAT]
M-69
M-68
Inside and Outside Corner M-70, 78
25
25
3
3
133010
1330
10
133010SPANDRELS [SLATS]
M-70M-78
M-16 M-19-1
Wall-side Longitudinal Section
30
M-19-1
150
M-16
15
900
SPANDREL[SLAT]
SPANDREL[SLAT]
WOOD GRAIN
TE-598F Pure White TE-2014 Crema Chestnut FW TE-2015 Crema Chestnut CW TE-2016 Persian Walnut W TE-635 Silky Elm TE-770 Modesty Birch W TE-947 Madras Walnut W
TE-710 Crema Cedar TE-736 Aroma Birch W TE-916 Plana Olive W TE-2041 Maquillage Elm W TE-945 Arno Birch W TE-851 Prime Teak W TE-881 Norte Oak N
TE-2025 Maquillage Elm TG TE-915 Haze OakTE-929 Foschia Elm G TE-800 Primary Oak PN TE-2034 Winter Cypress TE-911 Moderate Elm N TE-2035 Axis Oak N
TE-882 Norte Oak LAxis Oak LTE-2036 TE-901 Alba Oak TE-940 Abel Oak N TE-758 Vent Walnut N TE-941 Abel Oak MC TE-2026 Maquillage Elm MG
TE-883 Norte Oak G TE-2039 English Walnut G TE-903 Bliss Walnut M TE-776 Edel Cherry N TE-946 Arno Birch N TE-719 Feino Birch L TE-801 Primary Oak L
Colours and Patterns / For Interior
Please note that the colour in the brochure may vary from the actual product. Please note each design collection is subject to change periodically without notice.
Interior and Exterior Spandrels [Slats] / Installation Examples
5352
WOOD GRAIN
TE-835 Raffine Cherry L TE-904 Accord CherryTE-2037 Rold Cherry M TE-836 Raffine Cherry MTE-2033 Autumn Chestnut TE-853 Prime Teak MTE-2017 English Walnut M
TE-917 Plana Olive BTE-2038 Stretta Teak M TE-942 Abel Oak B TE-2022 Chalked Sucupira SGTE-2020 Bloom Walnut MB TE-2021 Bloom Walnut B TE-2023 Chalked Sucupira BB
TE-2024 Chalked Sucupira SB TE-802 Primary Oak MTE-902 Bliss Walnut B TE-948 Madras Walnut DG TE-913 Robust Elm G TE-891 Madras Walnut M TE-884 Verde Walnut M
TE-943 Fram Oak TG TE-854 Prime Teak D TE-766 Soleil Tineo D TE-914 Robust Elm D TE-2018 English Walnut B
TE-944 Fram Oak D TE-608 Glamorous Mahogany
TE-885 Verde Walnut RBTE-2019 Antique Walnut
TE-769 Forte Walnut D TE-886 Verde Walnut D TE-760 Vent Walnut D TE-803 Primary Oak DBTE-2040 English Walnut BL
White Elm NeoTA-026
WOOD GRAIN
TE-715 Classy Wood TE-804 Primary Oak G TE-808 Vent Walnut BL TE-742 Astro Walnut BL
FIBER
TA-018 Black FiberTA-017 White Fiber
STUCCO
TA-019 Solid Stucco
STONE
TA-023 Pietra Lime(Light)
TA-022 Siena Granit (sabi-ishi color)
TA-025 Alterna Sandstone (White)
TA-027N Pacific Gray
Symphony Walnut BTE-2050 Symphony Walnut DTE-2051 Stylish Maple NTE-2052
Frettare Oak NTE-2053 Frettare Oak GTE-2054 Revlon Wall WTE-2055 Revlon Wall MTE-2056 Revlon Wall BTE-2057 Legacy Ash GTE-2058 Legacy Ash DGTE-2059
Tendre Walnut LGTE-2060 Tendre Walnut MGTE-2061 Noir Imbuia DTE-2062
Colours and Patterns / For Interior
Please note that the colour in the brochure may vary from the actual product. Please note each design collection is subject to change periodically without notice.
Colours and Patterns
5554
TA-012 installation image
WOOD GRAIN WOOD GRAIN-CHARACTERISTIC-
WOOD GRAIN -BASIC-
METAL
TERRA COTTA
-JAPANESE MODERN-
TA-001 Terra Cotta Clay TA-002 Terra Cotta Arrosto TA-003 Terra Cotta Rosso
STONE
TA-006 Spangle Metal D TA-009 Aging Metal PD TA-010 Aging Metal PM TA-011 Aging Metal CTA-007 Spangle Metal M TA-008 Spangle Metal L
TA-024 Alterna Sandstone (Black)
TA-013 Antique Cedar G TA-014 Antique Cedar RB TA-015 Antique Cedar D TA-004 Rokko Cedar TA-012 Bamboo
TA-005 Rican Oak TA-758 Vent Walnut N TA-647 Earl Walnut M TA-532 Cherry Line M TA-605 Blossom Birch TA-602 Vintage Walnut
TA-760 Vent Walnut D TA-021 Criollo Elm TA-808 Vent Walnut BL TA-028 Pacific GrayTA-775 Carina Elm D
BASIC COLOUR
Silver Stain Colours Light Bronze Bronze
Dark Bronze Black
MATT COLOUR
Silver Matt Stain Colours Matt Light Bronze Matt Bronze Matt
Dark Bronze Matt Black Matt
Colours and Patterns—Aluminum Surface Treatment
Please note that the colour in the brochure may vary from the actual product. Please note each design collection is subject to change periodically without notice. Please note that the colour in the brochure may vary from the actual product. Please note each design collection is subject to change periodically without notice.
Colours and Patterns / For Exterior
5756
Interior SpecificationsEvaluation Items Test Items Test Method Test Result
Weather resistance Accelerated weathering test Apply light beam for a certain duration of time with a sunshine carbon arc weather meter. No remarkable change after irradiation of 2,000 hours
Heat resistance Heat resistance test (company standard) Leave the specimen in an oven at a temperature of 60 ± 5ºC for 48 hours. No remarkable change
Water resistance Water resistance test (company standard) Immerse the specimen in room temperature water for 24 hours and then dry it. No remarkable change
Humidity resistance Humidity resistance test (company standard) Leave the specimen in a tank at a constant temperature and humidity of 40 ± 2ºC and 90 ± % RH for 48 hours. No remarkable change
Heat cycle resistance Heat-cold repeating test (based on JAS heat-cold repeating C test)
Put a specimen measuring 150 x 150 mm in an oven at a temperature of 60 ± 3ºC, leave it there for two hours, and leave it in a low-temperature tank at - 20 ± 3ºC for two hours. Repeat this for two cycles. No remarkable change
Chemical resistance
Chemical resistance (company standard)Apply (a) 2% sodium hydrate, (b) 5% acetate solution, and (c) petroleum benzine to the specimen, leave it for six hours and wipe them off. No remarkable change
Chlorine resistance test (company standard)
Apply chlorine of 1.0 mg/L, which is the sanitation criterion for a swimming pool, and chlorine of 10.0 mg/L, 10 times higher concentration of the above, to the specimen, leave it for 24 hours, 48 hours, and 72 hours, and wipe it off. However, change chlorine water every six hours considering the decomposition rate of chlorine.
No remarkable change
Sanitation criterion of a swimming pool: The residual free chlorine concentration of water in a swimming pool shall be 0.4 mg/L or more. The desired concentration is 1.0 mg/L (according to the notification of the Director-General, Environmental Health Bureau, Ministry of Health and Welfare).
No remarkable change
Pollution resistancePollution resistance test (1)
Apply each detergent (weak alkali, neutral, and weak acid), insecticide, and heating oil to each specimen, leave them for six hours, and wipe them off. No remarkable pollution
Pollution resistance test (2) Apply each pollutant, wipe it off with water or ethanol after a lapse of 24 hours and observe the appearance. No remarkable pollution
Abrasion resistance Abrasion resistance test (pattern loss) (based on JAS abrasion C test)
Conduct a test on a 120 x 120 mm specimen with a taper abrasion tester and calculate the rotational value when the loss of pattern reaches 50%. Over 200 times
Scratch resistance Scratch resistance test (company standard) Pencil hardness test based on JIS K 5400 (load of 500 g) B~2B
Exterior SpecificationsEvaluation Items Test Items Test Method Test Result
Dimensional stability Heat resistance testPut a cross-cut measuring 100 mm x 100 mm at the center of a specimen, leave it at a temperature of 65ºC for two days, and check the clearance at the cross-cut part. No remarkable clearance
Weather resistance Accelerated weathering testApply a light beam to the specimen with a sunshine carbon arc weather meter for 8,000 hours and check the appearance. No remarkable change
Heat resistance Long-term heat resistance test Leave the specimen in each oven for 1,000 hours and check the appearance.60ºC No remarkable change80ºC No remarkable change
Heat cycle resistance Heat-cold repeating testConduct 100 cycles, with each cycle consisting of 80ºC for two hours switched to -20ºC for two hours, and observe the appearance. No remarkable change
Dry/wet cycle resistance Dry/wet cycle test
Conduct 20 cycles, with each cycle consisting of 40ºC and 30% RH for 8 hours switched to 40ºC and 90%RH for 16 hours, and observe the appearance. No remarkable change
Humidity resistance Long-term humidity resistance testLeave the specimen in a high humidity tank at a constant temperature of 40ºC and 90%RH and observe the appearance. No remarkable change
Scratch resistance Pencil scratch resistance (based on JIS H8602)
Apply the core of the pencil to the specimen while applying a load of 1 kg to the angle of about 45º and scratch the surface toward the front at a constant speed. 2B
Abrasion resistanceAbrasion resistance test
Rotate the specimen 7,000 times with a taper abrasion tester (abrasion wheel: CS-17; and load: 1 kg) and observe the appearance.
Slight loss of pattern occurred
Falling sand abrasion resistance test (based on JIS H8602)
Let a grinding material fall through a guiding tube of 20 mm in inner diameter to the specimen at an angle of 45º at a falling rate of 320 g/min. and measure the time when the base material begins to be exposed and the abrasion depth.
Abrasion end point: 5,100 sec.
Abrasion depth: -0.06 mm
Low temperature impact resistance Dupont impact test Let a 1 kg weight fall from a height of 30 cm to the specimen at 5ºC and observe the appearance. No cracking
Pollution resistance
Pollution resistance test (1)Immerse dry cotton in a solvent, rub the surface of the specimen with the cotton for 20 strokes and observe the appearance.
Petroleum benzine No remarkable change
Methyl ethyl ketone No remarkable change
Ethyl acetate No remarkable change
Ethanol No remarkable change
Pollution resistance test (2)Apply each pollutant, wipe it off with water or ethanol after a lapse of 24 hours and observe the appearance.
Blue ink No remarkable change
Black shoe cream No remarkable change
Black marker No remarkable change
Red crayon No remarkable change
Oil and solvent resistance testApply each oil and solvent, wipe it off with water after a lapse of 24 hours and observe the appearance.
Heating oil No remarkable change
CRC556 No remarkable change
Ethanol No remarkable change
Petroleum benzine No remarkable change
Acid resistance Acid resistance test Immerse the specimen in a 1% sulfuric acid aqueous solution for one hour and observe the appearance. No remarkable change
Alkali resistance Alkali resistance test (based on JIS H8602)Put a drop of 5 g/l sodium hydrate aqueous solution to the surface, leave it for 24 hours, wash the solution off with water, and observe the appearance. No remarkable change
Corrosion resistance CASS corrosion resistance test (based on JIS H8602)
Put the specimen in a test tank, spray a sodium chloride solution of a 50 g/l concentration to the specimen for 48 hours, and observe the appearance. No remarkable change
Adhesiveness Cross-cut peel test (based on JIS H8602)Scratch the surface at an interval of 2 mm in both the longitudinal and transverse directions to the depth that reaches the base material, make 100 grids with those scratches, apply cellophane tape over the grids, and peel it off.
100/100no abrasion
Adhesive strength
Normal state adhesiveness testPull the sheet in a 180 degree direction at a rate of 200 mm/min. relative to the base material under a normal room temperature and measure the adhesive strength. 20.0 N/25 mm or more
Heat creep resistance testApply a load at a rate of 500 g/25 mm to the sheet at a 90 degree direction relative to the base material at 60ºC and measure the peeling distance 30 min. later. <5 mm
Cold creep resistance testApply a load at a rate of 500 g/25 mm to the sheet at a 90 degree direction relative to the base material at -20ºC and measure the peeling distance 30 min. later. <5 mm
Technical Information—Decorative Sheet Performance Data
5958
Teams for FORTINA
TOPPAN PRINTING CO., LTD.Global Sales Department, Environmental Design Subdivision, Living & Industry Division
1-5-1 Taito, Taito-ku, Tokyo 108-8536 JapanPhone: +81-3-3835-6826 / 6827 FAX: +81-3-3835-6781 / 6782
Toppan Interamerica Inc. Georgia Factory
1131 Highway 155 South, McDonough, GA 30253 U.S.A. Phone: +1-770-957-5060 FAX: +1-770-957-6447
Pennsylvania FactoryThousand Oaks Corporate Center, Thousand Oaks Blvd., Morgantown, PA 19543 U.S.A.Phone: +1-610-286-3100 FAX: +1-610-286-3101
Toppan Europe GmbH Head Office
Heinrichstr. 83-85, 40239 Düsseldorf, GermanyPhone: Phone: +49-211-7327600 FAX: +49-211-363688
London Branch5th Floor, 15 Basinghall Street, London EC2V 5BR U.K.Phone: +44-20-7213-0500
Shanghai Toppan International Trading Co., Ltd. 9F, GLOBAL HARBOR TOWER B,1188 NORTH KAIXUAN RD.,SHANGHAI, CHINAPhone: +86-21-6223-2803 FAX: +86-21-6223-2300
Toppan Cosmo, Inc. Taiwan Representative Office 14F-6 No.378 SEC 1 Wunshin Rd, Taichung city, TaiwanPhone: +886-4-2323-5598 FAX: +886-4-2323-5587
Toppan Cosmo, Inc. Jakarta Representative Office Tempo Scan Tower, 32nd Floor, Jl.HR Rasuna Said Kav. 3-4Jakarta Selatan, 12950, IndonesiaPhone: +62-21-2934-9300 FAX: +62-21-2934-9301
Toppan Printing Co., Ltd. Singapore Branch 97 Ubi Avenue 4, Singapore 408754Phone: +65-6589-5454 FAX: +65-6589-5455
http://forest.toppan.co.jp/fortina/english/
6160