Post on 21-May-2018
Fire ProtectionPrice List
2011-AFP
EFFEctivE SEPtEMBER 12, 2011
VICTAULIC
WORLD HEADQUARTERS
P.O. Box 31Easton, PA 18044-0031 USA
4901 Kesslersville RoadEaston, PA 18040 USA
1-800-PICK-VIC(1-800-742-5842)1-610-559-33001-610-250-8817 (fax)pickvic@victaulic.com
www.victaulic.com
UNITED STATES
P.O. Box 31Easton, PA 18044-0031
1-610-559-33001-610-250-8817 (fax)pickvic@victaulic.com
CENTRAL AND SOUTH AMERICA
P.O. Box 31Easton, PA 18044-0031 USA
4901 Kesslersville RoadEaston, PA 18040 USA
1-610-559-33001-610-559-3608 (fax)vical@victaulic.com
4901 Kesslersville RoadEaston, PA 18040 USA
UPdAtEd 9/2011 PL2011-A-FP 0560 REv vVictaulic is a registered trademark of Victaulic company. © 2011 Victaulic company. all rights reserVed.
www.victaulic.comthe Victaulic website is an information resource that can help you with your piping projects. among the many resources available at the site:
• fully searchable product and project databases • free product submittals • free product literature • piping software demos and modules • information on new product innovations • support services, and more...
Piping. Systems. Solutions.
2011-A FPFire Protection Price List
SECTION 1 – FireLock® and Fire Protection Products
Style 009H FireLock EZ® Rigid Coupling
Style 005 FireLock Rigid Coupling
FireLock and Standard Fittings
Style 744 FireLock Flange Adapter
No. 67 End of Run Fitting
No. 10-DR Drain Elbow
Series 728 FireLock Grooved End Ball Valve
Series 705 FireLock Butterfly Valve – Supervised OPEN
Series 707C FireLock Butterfly Valve – Supervised CLOSED
Series 765 FireLock High Pressure Butterfly Valve – Supervised OPEN
Series 766 FireLock High Pressure Butterfly Valve – Supervised CLOSED
Series 771 OS&Y and Series 772 NRS Gate Valves
Series 773 and Series 774 Post Indicators
Supervisory Switches
Series 717H and 717 FireLock Check Valves
Series 722 FireLock Threaded Ball Valve
Style 720 TestMaster II Alarm Module
Series 747M FireLock Commercial Zone Control Riser Module
Series 247 FireLock Residential Zone Control Riser Module
Style 735 FireLock Fire Pump Test Meter
SECTION 2 – Hole Cut Products
Style 920/920N Mechanical-T® Outlet
Vic-Tap II
Style 920/920N Mechanical-T Cross
Style 922 Outlet Tee
Style 923 Vic-Let™ Strapless Outlet
SECTION 3 – Couplings, Spare Parts and Fittings
Style 07 Zero-Flex® Rigid Coupling
Style 77 Standard Coupling
Style 177 QuickVic® Flexible Coupling for Steel
Style 75 Flexible Coupling
Style 750 Reducing Coupling
Spare Parts
IPS Size Grooved End Fittings
SECTION 4 – AquaFlex® Stainless Steel Sprinkler Fittings
Series AQB Braided Flexible Hose Assembly
Series AQU Unbraided Flexible Hose Assembly
Series AQI Braided System for Institutional Applications
Series AQC Braided System for Clean Room Applications
Series AQD Braided System for Industrial Duct Applications
AquaFlex Parts and Accessories
SECTION 5 – Pressfit® System Products
Pressfit System For Carbon Steel Piping
SECTION 6 – Pipe Preparation Tools
VE12 Groove-In-Place
VE26 S/C Groove-In-Place
VE26/VE46 Power Drive Kit
VE46 Groove-In-Place
VE226 B/S/M/C Portable Grooving Tool
VE226 Power Drive Kit
VE106 Groove-N-Go
VE272SFS Field Roll Grooving Tool
VE268 Shop Fabrication Grooving Tool
VPD752 Victaulic Power Drive
VAPS 112 Pipe Stand
VHCT 900 Hole Cutting Tool
HCT908 Hole Cutting Tool
NOTE: Categories can have a single discount applied.
NOTE: Categories can have a single discount applied. Any individual discounts listed will take precedence over category discounts.
submitted By: __________________________________ date: __________________________________
approved By: ___________________________________ date: __________________________________
1www.victAULic.coM PL2011-A-FP
ind
Ex
index
table of contents
GEnERALgasket selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4SEction 1 – FireLock® and Fire Protection Productsstyle 009h firelock eZ® rigid coupling . . . . . . . . . . . . . . . . . . 6style 005 firelock rigid coupling . . . . . . . . . . . . . . . . . . . . . . . 6firelock and grooved ips pipe fittings –
no. 001 – 90° firelock elbow . . . . . . . . . . . . . . . . . . . . . . . 8no. 003 – 45° firelock elbow . . . . . . . . . . . . . . . . . . . . . . . 8no. 10 - 90° ips elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8no. 11 - 45° ips elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8no. 002 – firelock tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9no. 006 – firelock cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9no. 20 ips tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9no. 60 ips cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
style 744 firelock flange adapter . . . . . . . . . . . . . . . . . . . . . 10flange adapter notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10no. 67 end of run fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11no. 10-dr drain elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11series 728 firelock Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . 12series 705 Butterfly Valve – supervised open . . . . . . . . . . . . 13series 705 Weatherproof actuator replacement kit . . . . . . . . . 13series 707c Butterfly Valve – supervised closed . . . . . . . . . 14series 765 high pressure Butterfly Valve –
supervised open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14series 766 high pressure Butterfly Valve –
supervised closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15series 771 os&y and series 772 nrs gate Valves . . . . . . . . . 16flange mounting kits – series 772h nrs . . . . . . . . . . . . . . . . 16series 773 and series 774 post indicators . . . . . . . . . . . . . . . 17supervisory switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17series 717h firelock check Valve . . . . . . . . . . . . . . . . . . . . . 17series 717 firelock check Valve . . . . . . . . . . . . . . . . . . . . . . . 18series 722 threaded Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . 18series 720 testmaster ii alarm test module . . . . . . . . . . . . . . 18series 720 testmaster ii alarm test module
with gauge port tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19series 720 testmaster ii alarm test module
with pressure relief option . . . . . . . . . . . . . . . . . . . . . . . 19series 720 testmaster ii alarm test module
with pressure relief and gauge port options . . . . . . . . . . 20series 747m commercial Zone control riser module . . . . . . . . 20series 247 residential Zone control riser module . . . . . . . . . . 21pressure relief Valve kit for series 747m and 247 . . . . . . . . . . 21series 735 fire pump test meter . . . . . . . . . . . . . . . . . . . . . . 22SEction 2 – Hole cut Productsstyles 920/920n mechanical-t® outlet . . . . . . . . . . . . . . . . . . 24Vic-tap® ii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26style 922 outlet tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29style 923 Vic-let™ strapless outlet . . . . . . . . . . . . . . . . . . . . 30
SEction 3 – couplings, Spare Parts and Fittingsstyle 07 Zero-flex® rigid coupling . . . . . . . . . . . . . . . . . . . . . 32style 177 QuickVic® flexible coupling for steel . . . . . . . . . . . . 32style 77 standard flexible coupling . . . . . . . . . . . . . . . . . . . . 33style 75 flexible coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33style 750 reducing coupling . . . . . . . . . . . . . . . . . . . . . . . . . 34lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35metal liners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36plated trackhead Bolts and nuts . . . . . . . . . . . . . . . . . . . . . . 37go-no-go pipe tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37elbows –
no. 12 - 22Z\x° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38no. 13 - 11Z\v° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38no. 100 and no. 110 1Z\x d long radius elbows . . . . . . . . 38
no. 29m tee with threaded Branch . . . . . . . . . . . . . . . . . . . . 39no. 35 cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39no. 33 true y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39no(s). 40, 42, and 43 adapter nipples . . . . . . . . . . . . . . . . . . 40no. 80 female threaded adapter . . . . . . . . . . . . . . . . . . . . . . 40no(s). 18 and 19 adapter elbows . . . . . . . . . . . . . . . . . . . . . . 41no. 25 grooved reducing tee . . . . . . . . . . . . . . . . . . . . . . . . 42no. 29t threaded reducing tee . . . . . . . . . . . . . . . . . . . . . . 44no. 50 concentrc reducers . . . . . . . . . . . . . . . . . . . . . . . . . . 45no. 51 eccentric reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . 45no. 52 reducer – male threaded small end . . . . . . . . . . . . . . 47SEction 4 – AquaFlex® Stainless Steel Sprinkler Fittingsseries aQB Braided flexible hose assembly . . . . . . . . . . . . . . 50series aQB Braided flexible hose assembly
with hat furring channel . . . . . . . . . . . . . . . . . . . . . . . . . 50series aQu unbraided flexible hose assembly . . . . . . . . . . . . 51series aQB and aQu aquaflex flexible sprinkler fittings
with pre-assembled sprinklers. . . . . . . . . . . . . . . . . . . . . 53series aQi Braided flexible hose assembly
for institutional applications . . . . . . . . . . . . . . . . . . . . . . . 54series aQc Braided flexible hose assembly
for clean room applications . . . . . . . . . . . . . . . . . . . . . . 54series aQd Braided flexible hose assembly
for industrial duct systems . . . . . . . . . . . . . . . . . . . . . . . 55series aQs sub-assemblies – hoses less Brackets . . . . . . . . 55series aQs system sub-assemblies and
individual components . . . . . . . . . . . . . . . . . . . . . . . . . . 56SEction 5 – Pressfit® System Productspressfit for carbon steel pipe
gasket selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58style 500 loose o-rings . . . . . . . . . . . . . . . . . . . . . . . . . . 58style 505 standard coupling . . . . . . . . . . . . . . . . . . . . . . . 59style 510 90° elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59style 509 90° elbow – short tangent . . . . . . . . . . . . . . . . . 59style 506 slip coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
www.victAULic.coM PL2011-A-FP2
table of contentstA
BLE
oF
co
ntE
ntS
style 511 45° elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60style 580 male adapter – threaded . . . . . . . . . . . . . . . . . . 60style 580 female adapter – threaded . . . . . . . . . . . . . . . . 61style 520 tee – female reducing Branch . . . . . . . . . . . . . 61style 550 reducer insert . . . . . . . . . . . . . . . . . . . . . . . . . . 61style 520 tee – reducing Branch . . . . . . . . . . . . . . . . . . . 62style 520 straight tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62style 520 end-of-line – threaded reducing Branch . . . . . 62style 520 end-of-line – pressfit reducing Branch . . . . . . . 63style 522 Brass Body Ball Valve . . . . . . . . . . . . . . . . . . . . 63
Section 6 – Pipe Preparation toolsVic-easy® roll grooving tools – field portable
Ve12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Ve26 s/c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Ve26/Ve46 power drive kit . . . . . . . . . . . . . . . . . . . . . . . . 66Ve46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Ve226 B/s/m/c/Bss/mss/p . . . . . . . . . . . . . . . . . . . . . . . 67Ve226 power drive kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Vic-easy roll grooving tools – field fabricationVe106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Ve272sfs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Vic-easy roll grooving tools – shop fabricationVe268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Vic-easy tool accessoriesVpd752 Victaulic power drive . . . . . . . . . . . . . . . . . . . . . . 73Vaps112 pipe stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
hole cutting toolsVhct900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74hct908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
pressfit toolspft505 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74pft505 Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74pft509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75pft509 Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75pressfit accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75pressfit insertion gauges . . . . . . . . . . . . . . . . . . . . . . . . . . 75
how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76terms and conditions of tool rental . . . . . . . . . . . . . . . . . . . . 77terms and conditions of tool sale . . . . . . . . . . . . . . . . . . . . . . 78terms and conditions of sale . . . . . . . . . . . . . inside Back coverWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inside Back coverVictaulic u.s., central and south america sales
and service centers . . . . . . . . . . . . . . . . . . . . . . Back cover
3
table of contentstA
BLE
oF c
on
tEntS
www.victAULic.coM PL2011-A-FP
gasket selection guideRequest publication 05.01 for more information.
iMPoRtAnt PLEASE REAd BEFoRE oRdERinG. Gasket selection must always be specified on your order.
standard gaskets
iPS
GRADETEMP.
RANGE COMPOUNDCOLOR CODE GENERAL SERVICE RECOMMENDATIONS
E –30°F to +230°F EPDM GreenStripe
Recommended for hot water service within the specified tempera-ture range plus a variety of dilute acids, oil-free air and many chemi-cal services. UL classified in accordance with ANSI/NSF 61 for cold +86°F/+30°C and hot +180°F/+82°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES.
E †Ambient EPDM Violet
Stripe
Applicable for wet and dry (oil-free air) sprinkler services only. For dry services, Victaulic continues to recommend the use of FlushSeal® gaskets. NOT RECOMMENDED FOR HOT WATER SERVICES.
† Vic-Plus gasket. Lubrication not required.
special gaskets
iPS
GRADETEMP.
RANGE COMPOUNDCOLOR CODE GENERAL SERVICE RECOMMENDATIONS
L –30°F to +350°F Silicone RedGasket
Recommended for dry heat, air without hydrocarbons to +350°F/+177°C and certain chemical services.
special gaskets
AwwA And tRAnSition coUPLinG
GRADETEMP.
RANGE COMPOUNDCOLOR CODE GENERAL SERVICE RECOMMENDATIONS
S –20°F to +180°F Nitrile OrangeStripe
Specially compounded to conform to ductile pipe surfaces. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; not recom-mended for hot dry air over +140°F and water over +150°F. NOT RECOMMENDED FOR HOT WATER SERVICES.
M –20°F to +200°FHaloge-
natedButyl
BrownStripe
Recommended for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. Readily conforms to ductile pipe surfaces. UL classified in accordance with ANSI/NSF 61 for cold +86°F/+30°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES.
www.victAULic.coM PL2011-A-FP4
GasketsG
ASk
Et
SELE
cti
on
GU
idE
section 1 – firelock® and fire protection products
FireLock® and Fire Protection Products
5www.victAULic.coM PL2011-A-FP
style 009h firelock eZ® rigid coupling
firelock eZ® rigid coupling
StyLE 009HRequest publication 10.61
Request Victaulicpublication 10.01 for details.
StyLE 009H – GRAdE “E” (tyPE A) GASkEt
PIPE Inches
Aprx. Wgt. Ea.
COUPLING COMPLETE † with Grade “E” (Type A) Gasket SPARE PARTS
Nom. Size Outside Dia. Lbs
Price Each Grade “E” (Type A) GasketPainted Galv.
1Z\v 1.660 1.4 $38.00 $45.50 $34.50
1Z\x 1.900 1.5 39.00 46.50 37.50
2 2.375 1.9 43.50 51.50 40.00
2Z\x 2.875 2.1 50.50 60.50 43.50
3 3.500 2.3 57.50 71.00 50.00
4 4.500 2.9 81.00 97.50 66.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
style 005 firelock rigid coupling
firelock rigid coupling
StyLE 005Request publication 10.02.
See Victaulicpublication 10.01
for details.
StyLE 005 – vic-PLUS GRAdE “E” (tyPE A) GASkEt
PIPE Inches
COUPLING COMPLETE † With Vic-Plus § Grade “E” (Type A)
Gasket SPARE PARTS
Nom. Size
Outside Dia.
Aprx. Wgt. Each
Lbs
Price Each Grade E (Type A) Gasket
Only Price Ea.
Bolt & Nut *
Painted Galv. No.Size inches/ millimeters
Price Each Pltd.
1Z\v 1.660 1.5 $40.50 $49.00 $34.50 2 C\, x 2Z\v $10.00
1Z\x 1.900 1.6 41.50 50.00 37.50 2 C\, x 2Z\v 10.00
2 2.375 1.9 46.50 55.00 40.00 2 C\, x 2Z\x 11.00
2Z\x 2.875 2.0 53.50 64.50 43.50 2 C\, x 2Z\x 11.00
3 3.500 2.4 61.00 75.00 50.00 2 C\, x 2Z\x 11.00
4 4.500 3.8 86.50 103.50 66.50 2 C\, x 2Z\x 11.00
5 5.563 4.5 108.00 136.00 67.00 2 Z\x x 3 13.50
6 6.625 5.5 129.50 157.00 74.00 2 Z\x x 3 13.50
8 8.625 11.4 216.50 263.00 106.00 2 B\, x 4Z\v 16.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Note: Style 005 FireLock bolts and nuts are sized for use with Style 005 couplings only and must not be used with other Victaulic products.Grade E (Type A) EPDM gaskets are applicable for wet and dry fire sprinkler systems (ambient temperature) only.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
* Number of bolts equals number of segments supplied.
www.victAULic.coM PL2011-A-FP6
FireLock couplings, Fittings, valves, and AccessoriesSE
cti
on
1
FiR
ELo
ck
SyS
tEM
Fo
R G
Ro
ovE
d i
PS
PiP
E
firelock rigid coupling
StyLE 005Request publication 10.02
See Victaulicpublication 10.01
for details.
StyLE 005 – vic-PLUS GRAdE “E” (tyPE A) FLUSHSEAL GASkEt
PIPE Inches
COUPLING COMPLETE † With Vic-Plus § Grade “E” (Type A) FlushSeal Gasket SPARE PARTS
Nom. Size
Aprx. Wgt. Each
(lbs)
Price Each Grade “E” (Type A) Vic-Plus FlushSeal Gasket
Only Price EachPainted Galvanized
1Z\v 1.5 $54.50 $60.00 $47.50
1Z\x 1.6 57.00 66.00 52.00
2 1.9 60.50 71.50 57.00
2Z\x 2.0 73.00 84.00 59.00
3 2.4 78.50 91.50 70.00
4 3.8 110.00 128.00 93.50
5 4.5 186.00 214.00 134.00
6 5.5 205.00 240.00 171.50
8 11.4 332.00 385.00 188.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Standard gasket and FlushSeal gasket approved for dry pipe systems to –40°F/–40°C. Based on “typical” pipe surface condi-tions, supplemental lubricant is recommended for services installed below 0°F/–18°C and for all dry pipe systems or systems to be subjected to air tests prior to being filled with water. Supplemental lubrication may also be required on pipe with raised or undercut weld seams or pipe that has voids and/or cracks at the weld seams. Victaulic continues to recommend the use of FlushSeal gaskets for dry services.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
7
FireLock couplings, Fittings, valves, and Accessories
www.victAULic.coM PL2011-A-FP
SEctio
n 1
FiR
ELock
SyStEM
FoR
GR
oo
vEd iP
S PiP
E
firelock and grooved ips pipe fittings –no. 001 – 90° firelock elbow, no. 003 – 45° firelock elbow
firelock fittings
90° ELBow no. 001 45° ELBow no. 003Request publication 10.03.
no. 001
no. 003
See Victaulicpublication 10.01
for details.
FiRELock FittinGS – 90° ELBow oR 45° ELBow
Nom. Size 90° Elbow No. 001 45° Elbow No. 003
Inches
Aprx. Wgt. Each
Lbs
Price Each Aprx. Wgt. Each
Lbs
Price Each
Painted Galv. Painted Galv.
2 1.8 $33.50 $43.00 1.3 $33.50 $43.00
2Z\x 2.5 44.50 60.50 2.2 44.50 56.00
3 3.9 59.00 78.50 2.9 59.00 74.50
4 6.3 84.50 117.50 5.4 84.50 112.50
5 12.6 200.00 263.50 8.3 200.00 246.00
6 13.3 235.00 323.50 11.7 235.00 296.50
8 26.0 459.50 655.00 20.4 459.50 632.00
NOTE: FireLock Fittings are designed for use with FireLock and FireLock EZ couplings. Use of other products may result in bolt pad interference.
no. 10 - 90° ips elbow, no. 11 - 45° ips elbow
fittings
90° ELBow no. 10 45° ELBow no. 11Request publication 07.01.
no. 10
no. 11
FittinGS – 90° ELBow oR 45° ELBow
Nom. Size 90° Elbow No. 10 45° Elbow No. 11
Inches
Aprx. Wgt. Ea.
Lbs.C - E
Inches
Price Each Aprx. Wgt. Ea.
Lbs.C - E
Inches
Price Each
Painted Galv. Painted Galv.
C\v 0.5 2.25 $123.00 $129.50 0.5 1.50 $123.00 $129.50
1 0.6 2.25 65.50 87.00 0.6 1.75 65.50 82.50
1Z\v 1.0 2.75 65.50 87.00 0.9 1.75 65.50 82.50
1Z\x 1.2 2.75 65.50 87.00 0.9 1.75 65.50 82.50
10 63.3 9.00 1338.50 1733.50 37.5 4.75 1338.50 1460.50
12 74.0 10.00 2143.00 2765.00 66.7 5.25 2143.00 2497.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
www.victAULic.coM PL2011-A-FP8
FireLock couplings, Fittings, valves, and Accessories SE
cti
on
1
FiR
ELo
ck
SyS
tEM
Fo
R G
Ro
ovE
d i
PS
PiP
E
no. 002 – firelock tee, no. 006 – firelock cap
firelock fittings
tEE no. 002 cAP no. 006Request publication 10.03.
no. 002
no. 006
See Victaulicpublication 10.01
for details.
FiRELock FittinGS – tEE oR cAP
Nom. Size Tee No. 002 Cap No. 006
Inches
Aprx. Wgt. Each
Lbs
Price Each Aprx. Wgt. Each
Lbs
Price Each
Painted Galv. Painted Galv.
1Z\v – – – 0.4 $17.50 $27.50
1Z\x – – – 0.6 18.50 27.50
2 2.5 $51.00 $63.50 0.7 22.00 30.50
2Z\x 3.6 67.50 86.50 1.0 26.00 33.50
3 5.3 94.00 120.50 1.3 31.00 40.50
4 9.0 142.00 185.50 2.4 46.00 63.00
5 15.7 329.50 412.50 4.1 94.00 128.50
6 22.7 380.00 495.50 5.9 104.50 145.00
8 38.7 807.50 1066.50 12.7 199.50 273.00
NOTE: FireLock Fittings are designed for use with FireLock and FireLock EZ couplings. Use of other products may result in bolt pad interference.
no. 20 ips tee
fittings
tEE no. 20Request publication 07.01.
no. 20
See Victaulicpublication 10.01
for details.
FittinGS – StAndARd tEE
Nom. SizeAprx.
Wgt. Ea.Tee
No. 20
Inches Lbs
Price Each
Painted Galv.
C\v 0.6 $132.00 $143.00
1 1.0 101.50 133.00
1Z\v 1.5 101.50 133.00
1Z\x 2.0 101.50 133.00
10 73.0 2605.50 3373.50
12 99.0 3631.50 4638.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
no. 60 ips cap
fittings
cAP no. 60Request publication 07.01.
no. 60
FittinGS – cAP
Nom. Size Cap No. 60
Inches
Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv.
C\v 0.2 $133.50 $144.50
1 0.3 55.50 66.50
1Z\v 0.3 55.50 66.50
1Z\x 0.5 55.50 66.50
10 21.0 560.00 729.50
12 35.6 916.00 1166.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Caps are malleable/ductile iron.
9
FireLock couplings, Fittings, valves, and Accessories
www.victAULic.coM PL2011-A-FP
SEctio
n 1
FiR
ELock
SyStEM
FoR
GR
oo
vEd iP
S PiP
E
style 744 firelock flange adapter
firelock flange adapter
StyLE 744 – 175 PSi witH vic-PLUS GASkEtRequest publication 10.04.
See Victaulicpublication 10.01
for details.
StyLE 744 – vic-PLUS GRAdE “E” (tyPE A) GASkEt
PIPE Inches VIC-FLANGE COMPLETE † SPARE PARTS
Nominal Size
Outside Diameter
Aprx. Wgt. Each
Lbs
Price Each Vic-Plus Grade “E” (Type A)
Gasket Price Ea.Painted Galv.
Style 744 - Hinged
2 2.375 2.7 $163.00 $189.00 $30.00
2Z\x 2.875 4.2 190.00 226.00 35.00
3 3.500 4.8 214.00 256.50 37.00
4 4.500 6.5 278.50 339.50 49.00
5 5.563 8.3 334.50 407.50 58.50
6 6.625 9.0 364.50 444.00 68.00
8 8.626 13.9 458.00 573.00 91.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
The Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL flanges.
For Flange Washers see Spare Parts in Section 3.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Vic-flange adapter notes
Victaulic flange adapter Washer notes
Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing. some applications, for which the Victaulic flange adapter is oth-erwise well suited, do not provide an adequate mating surface. in such cases, it is recommended that a metal flange washer be inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing surface. see spare parts section for flange washer prices.
typical applications where a Victaulic flange washer should be used are:
1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. the flange washer is then inserted between the Victaulic flange adapter and the flange gasket.
2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Victaulic flange adapter.
3. When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange adapters and the rubber faced flange.
4. When mating c.i. flanges to ips flanges: the flange washer is placed between two Victaulic flange adapters. if one flange is not a Victaulic flange adapter (e.g., a flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Victaulic flange adapter.
5. When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above.
www.victAULic.coM PL2011-A-FP10
FireLock couplings, Fittings, valves, and Accessories SE
cti
on
1
FiR
ELo
ck
SyS
tEM
Fo
R G
Ro
ovE
d i
PS
PiP
E
no. 67 end of run fitting
end of run fitting
no. 67Request publication 10.21.
See Victaulicpublication 10.01
for details.
End oF RUn FittinG
Nominal SizeAprx.
Weight Each Price Each
Inches Lbs Painted Galv.
1Z\v x Z\x NPT 1.4 $61.00 $76.00
C\v NPT 1.4 61.00 76.00
1 NPT 1.4 61.00 76.00
1Z\x x Z\x NPT 1.6 61.00 76.00
C\v NPT 1.6 61.00 76.00
1 NPT 1.6 61.00 76.00
2 x Z\x NPT 1.7 65.50 86.50
C\v NPT 1.7 65.50 86.50
1 NPT 1.7 65.50 86.50
2Z\x x Z\x NPT 2.0 78.00 94.00
C\v NPT 2.0 78.00 94.00
1 NPT 2.0 78.00 94.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
no. 10-dr drain elbow
drain elbow
no. 10-dRRequest publication 10.05.
USA
See Victaulicpublication 10.01
for details.
dRAin ELBow witH 1” dRAin
Nom. SizeAprx
Wgt. Ea. Price Each
Inches Lbs Painted Galv.
2Z\x 5.2 $153.50 $197.50
3 5.3 196.00 234.50
4 8.8 199.50 270.50
6 18.7 350.00 498.00
11
FireLock couplings, Fittings, valves, and Accessories
www.victAULic.coM PL2011-A-FP
SEctio
n 1
FiR
ELock
SyStEM
FoR
GR
oo
vEd iP
S PiP
E
series 728 firelock Ball Valve
fire protection Valves
firelock Ball Valve
SERiES 728Request publication 10.17.
tHREAdEd
GRoovEd
See Victaulicpublication 10.01
for details.
SERiES 728 – witH wEAtHERPRooF ActUAtoR
Nominal Size
T x T Ball Valve with Weatherproof Actuator †
G x G Ball Valve with Weatherproof Actuator †*
Inches
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
1 5.1 $238.50 – –
1Z\v 5.8 253.00 7.5 $253.00
1Z\x 6.6 301.00 8.5 301.00
2 8.5 363.50 10.5 363.50
* Grooved valve will come standard with a Z\x” NPT tap.† Please specify choice of grooved or threaded ends on order.
B - 020 - 4 6 6 T - W2
TypeAct.
In./mmSize
CodePressure
Rating Body/Ball Seat End Connection Operator
B 010012014020
1/251¼/321½/402/50
4 - 365 psi 6 - Bronze/Chrome Plated Brass
6 - Reinforced TFE T - ThreadedG - Grooved*
W2 - UL/ULC/FM Weatherproof Gear Operator w/2 SPDT SwitchesW9 - UL/FM Weatherproof Gear Operator with 2 SPDT Switches and Extra Long Wire Leads
* 1¼"/32 mm, 1½"/40 mm and 2"/50 mm only
www.victAULic.coM PL2011-A-FP12
FireLock System for Grooved iPS PipeSE
cti
on
1
FiR
ELo
ck
SyS
tEM
Fo
R G
Ro
ovE
d i
PS
PiP
E
series 705 Butterfly Valve – supervised open
Butterfly Valve – Supervised oPEn
SERiES 705
(with weatherproof actuator)Request publication 10.81.
Request Victaulicpublication 10.01 for details.
SERiES 705 BUttERFLy vALvE
Nominal Size
WRD – Pre-wired without Tap
WRD – Pre-wired with Tap
Inches
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
2 8.2 $580.00 8.2 $637.00
2Z\x 9.7 580.00 9.7 637.00
3 10.7 627.00 10.7 688.50
4 14.0 657.50 14.0 721.00
5 25.4 985.00 23.7 –
6 28.7 934.00 28.7 1015.50
8 43.0 1431.00 43.0 1529.00
10 80.6 3466.00 – –
12 94.6 4950.50 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
series 705 Weatherproof actuator replacement kit
Weatherproof actuator replacement kit
FoR SERiES 705 – SUPERviSEd oPEn onLy
(Consists of mounting bolt, actuator, handwheel and assembly hardware)Request publication 10.81.
GEAR oPERAtoR REPAiR kit FoR SERiES 705
Nominal Size inches Part Code
Kit Price Each
2 K020705100 $463.00
2Z\x K024705100 463.00
3 K030705100 463.00
4 K040705100 497.50
5 K050705100 497.50
6 K060705100 541.00
8 K080705100 1279.50
10 K100705100 1665.00
12 K120705100 1665.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
13
FireLock System for Grooved iPS Pipe
www.victAULic.coM PL2011-A-FP
SEctio
n 1
FiR
ELock
SyStEM
FoR
GR
oo
vEd iP
S PiP
E
series 707c Butterfly Valve – supervised closed
Butterfly Valve – Supervised cLoSEd
SERiES 707c
(with weatherproof actuator)Request publication 10.75.
Request Victaulicpublication 10.01 for details.
SERiES 707c – PRE-wiREd
Nominal Size
WRD – Pre-wired without Tap
Inches
Aprx. Wgt. Each
Lbs Part Code Price Each
2 8.2 V020707900 $606.50
2Z\x 9.7 V024707900 606.50
3 10.7 V030707900 655.50
4 14.0 V040707900 687.50
5 25.4 V050707900 1029.50
6 28.7 V060707900 976.50
8 43.0 V080707900 1495.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
series 765 high pressure Butterfly Valve – supervised open
high pressure Butterfly Valve – Supervised oPEn
SERiES 765
(with Weatherproof Actuator)Request publication 10.80.
SERiES 765 GRoovEd End HiGH PRESSURE BUttERFLy vALvE
Nominal Size
Pre-wired without Tap
Pre-wired with Tap
Inches
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
2 9.5 $679.50 9.5 $737.50
2Z\x 9.7 703.00 9.7 763.00
3 10.7 760.50 10.7 824.50
4 14.0 797.00 14.0 865.00
5 25.8 1194.50 25.8 1302.50
6 28.7 1132.50 28.7 1228.50
8 43.0 1735.00 43.0 1882.50
10 80.6 4202.00 – –
12 94.6 6001.50 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
www.victAULic.coM PL2011-A-FP14
FireLock System for Grooved iPS PipeSE
cti
on
1
FiR
ELo
ck
SyS
tEM
Fo
R G
Ro
ovE
d i
PS
PiP
E
series 766 high pressure Butterfly Valve – supervised closed
high pressure Butterfly Valve – Supervised cLoSEd
SERiES 766
(with Weatherproof Actuator)Request publication 10.83.
SERiES 766 GRoovEd End HiGH PRESSURE BUttERFLy vALvE
Nominal Size
Pre-wired without Tap
Inches
Aprx. Wgt. Each
Lbs Part Code Price Each
2 8.2 V020766900 $679.50
2Z\x 9.7 V024766900 703.00
3 10.7 V030766900 760.50
4 14.0 V040766900 797.00
5 25.4 V050766900 1194.50
6 28.7 V060766900 1132.50
8 43.0 V080766900 1735.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
15
FireLock System for Grooved iPS Pipe
www.victAULic.coM PL2011-A-FP
SEctio
n 1
FiR
ELock
SyStEM
FoR
GR
oo
vEd iP
S PiP
E
series 771 os&y and series 772 nrs gate Valves
series 771h os&y groove x groove series 771f os&y groove x flange series 772h nrs groove x groove series 772f nrs groove x flange gate ValvesRequest publication 10.92.
SERiES 771H SERiES 772H SERiES 771F SERiES 772FRequest Victaulicpublication 10.01 for details.
Gate Valve Size Inches
Approx. Weight Each
Lbs
Series 771H OS&Y Groove x Groove
Price Each
Series 771F OS&Y Groove x Flange
Price Each
Approx. Weight Each
Lbs
Series 772H NRS Groove x Groove
Price Each
Series 772F NRS Groove x Flange
Price Each
2Z\x 30.6 $778.00 $778.00 29.3 $719.50 $719.50
3 71.0 1011.00 1011.00 63.0 967.50 967.50
4 77.0 1190.50 1190.50 70.0 1152.50 1152.50
6 144.0 1594.50 1594.50 117.0 1477.50 1477.50
8 238.0 2500.00 2500.00 188.0 2182.00 2182.00
10 344.7 3365.50 3365.50 297.7 3171.50 3171.50
12 489.5 5250.50 5250.50 394.9 4437.50 4437.50flange mounting kits – series 772h nrs
flange mounting kits for use with series 772h nrs gate Valves
FLAnGE MoUntinG kitS FoR USE witH SERiES 772F nRS GAtE vALvES
Gate Valve Size Inches Price Each
3 - 4 $185.00
6 - 8 223.00
10 345.00
REPLAcEMEnt HAndwHEELS FoR SERiES 772H And 772F nRS GAtE vALvES
Gate Valve Size Inches Price Each
3 - 4 $37.00
6 - 8 104.00
www.victAULic.coM PL2011-A-FP16
FireLock System for Grooved iPS PipeSE
cti
on
1
FiR
ELo
ck
SyS
tEM
Fo
R G
Ro
ovE
d i
PS
PiP
E
series 773 and series 774 post indicators
series 773 and series 774 post indicators
SERiES 773 SERiES 774
Request Victaulicpublication 10.01 for details.
SERiES 773 And SERiES 774 PoSt indicAtoRS
Description
Approx. Weight Ea.
Lbs
Series 773 Wall Post Indicator
Price Each
Series 773 Wall Post Indicator Wall Post Indicators include all hardware required to mount indica-tor to valve.
90.0 $909.50
Series 774 Upright Post Indicator 250.0 1838.50
supervisory switches
supervisory switches SUPERviSoRy SwitcHES
Model Description Price Each
OSY2 Outside Screw and Yoke Valve Supervisory Switch $245.50
series 717h firelock check Valve
firelock check Valve
SERiES 717HRequest publication 10.08.
SERiES 717H
Size Inches
Aprx. Weight Each
Lbs Price Each
2 10.7 $314.50
2Z\x 13.8 332.00
3 20.0 332.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
17
FireLock System for Grooved iPS Pipe
www.victAULic.coM PL2011-A-FP
SEctio
n 1
FiR
ELock
SyStEM
FoR
GR
oo
vEd iP
S PiP
E
series 717 firelock check Valve
firelock check Valve
SERiES 717Request publication 10.08.
21/2 And 3"
4 – 12"
See Victaulicpublication 10.01
for details.
SERiES 717
Size Inches
Aprx. Weight Each
Lbs Price Each
2Z\x 3.6 $332.00
3 3.6 332.00
4 20.0 345.50
5 27.0 840.50
6 38.0 861.00
8 64.0 1496.00
10 100.0 2850.50
12 140.0 3719.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
series 722 threaded Ball Valve
threaded Ball Valve
SERiES 722Request publication 08.15.
FM
Request Victaulicpublication 10.01 for details.
SERiES 722
Nominal Size Inches
Aprx. Weight Each
Lbs Price Each
Z\v 0.2 $42.50
Z\x 0.4 59.50
C\v 0.7 59.50
1 1.0 80.00
1Z\v 1.5 127.00
1Z\x 2.1 157.00
2 2.4 209.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
series 720 testmaster ii alarm test module
testmaster ii alarm test module
SERiES 720Request publication 10.22.
SERiES 720t witH tHREAdEd EndS
SERiES 720G witH GRoovEd EndS
See Victaulicpublication 10.01
for details.
tEStMAStER ii ALARM tESt ModULE
Size Style 720T NPT Threaded Style 720G Grooved
Inches Orifice
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
1 x Z\x 7.3 $258.00 – –
ZM\cx 7.3 258.00 – –
1Z\v x Z\x 6.9 296.50 6.6 $296.50
ZM\cx 6.9 296.50 6.6 296.50
1Z\x x Z\x 9.0 484.50 8.5 484.50
ZM\cx 9.0 484.50 8.5 484.50
2 x Z\x 10.1 522.50 9.3 522.50
ZM\cx 10.1 522.50 9.3 522.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
www.victAULic.coM PL2011-A-FP18
FireLock System for Grooved iPS PipeSE
cti
on
1
FiR
ELo
ck
SyS
tEM
Fo
R G
Ro
ovE
d i
PS
PiP
E
series 720 testmaster ii alarm test module with gauge port tap
testmaster ii alarm test module
SERiES 720 witH GAUGE PoRt tAPRequest publication 10.22.
See Victaulicpublication 10.01
for details.
tEStMAStER ii ALARM tESt ModULE – witH GAUGE PoRt tAP
Size Style 720T Threaded with Gauge Port Tap Style 720G Grooved with Gauge Port Tap
Inches Orifice
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
1 x Z\x 7.3 $285.00 – –
ZM\cx 7.3 285.00 – –
1Z\v x Z\x 6.9 323.50 6.6 $323.50
ZM\cx 6.9 323.50 6.6 323.50
1Z\x x Z\x 9.0 512.00 8.5 512.00
ZM\cx 9.0 512.00 8.5 512.00
2 x Z\x 10.1 550.00 9.3 550.00
ZM\cx 10.1 550.00 9.3 550.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
series 720 testmaster ii alarm test module with pressure relief option
testmaster ii alarm test module
SERiES 720 witH PRESSURE RELiEF oPtionRequest publication 10.22.
See Victaulicpublication 10.01
for details.
tEStMAStER ii ALARM tESt ModULE – witH PRESSSURE RELiEF oPtion
Size Style 720T Threaded with Pressure Relief Option
Inches Orifice
Aprx. Wgt. Each
Lbs Price Each
1 x Z\x 7.3 $383.00
ZM\cx 7.3 383.00
1Z\v x Z\x 6.9 426.50
ZM\cx 6.9 426.50
1Z\x x Z\x 9.0 619.00
ZM\cx 9.0 619.00
2 x Z\x 10.1 643.00
ZM\cx 10.1 643.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
19
FireLock System for Grooved iPS Pipe
www.victAULic.coM PL2011-A-FP
SEctio
n 1
FiR
ELock
SyStEM
FoR
GR
oo
vEd iP
S PiP
E
series 720 testmaster ii alarm test module With pressure relief and gauge port options
testmaster ii alarm test module
SERiES 720 witH PRESSURE RELiEF And GAUGE PoRt oPtionSRequest publication 10.22.
See Victaulicpublication 10.01
for details.
tEStMAStER ii ALARM tESt ModULE – witH PRESSURE RELiEF And GAUGE PoRt oPtionS
Size Style 720T Threaded with Pressure Relief and Gauge Port Option
Inches Orifice
Aprx. Wgt. Each
Lbs Price Each
1 x Z\x 7.3 $410.50
ZM\cx 7.3 +
1Z\v x Z\x 6.9 454.50
ZM\cx 6.9 454.50
1Z\x x Z\x 9.0 647.00
ZM\cx 9.0 647.00
2 x Z\x 10.1 671.00
ZM\cx 10.1 671.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
series 747m commercial Zone control riser module
commercial Zone control riser module
SERiES 747MRequest publication 10.96.
See Victaulicpublication 10.01
for details.
SERiES 747M – coMMERciAL ZonE contRoL RiSER ModULE
Riser Module Body Size Drain Size
Aprx. Wgt. Each Price Each
Nominal Inches Inches Lbs Style 747M Grooved *
1Z\v 1 15.2 $698.50
1Z\x 1 15.5 713.00
2 1 19.9 747.00
2Z\x 1Z\v 22.7 807.00
3 1Z\v 23.2 847.00
4 2 30.3 1038.00
6 2 36.7 1159.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
*Price includes all components pictured at left.
See Part Code Configuration Guide
www.victAULic.coM PL2011-A-FP20
FireLock System for Grooved iPS PipeSE
cti
on
1
FiR
ELo
ck
SyS
tEM
Fo
R G
Ro
ovE
d i
PS
PiP
E
series 247 residential Zone control riser module
residential Zone control riser module
SERiES 247Request publication 10.97.
See Victaulicpublication 10.01
for details.
SERiES 247 – RESidEntiAL ZonE contRoL RiSER ModULE
Riser Module Body Size Drain Size
Aprx. Wgt. Each Price Each
Nominal Inches Inches Lbs Style 247M Grooved *
1 1 15.2 $655.00
1Z\v 1 15.2 698.50
1Z\x 1 15.5 713.00
2 1 19.9 747.00
See Part Code Configuration Guide
pressure relief Valve kit for series 747m and 247
pressure relief Valve kit
FoR SERiES 747M And 247 RiSER ModULESRequest publication 10.97.
SERiES 747M And 247 PRESSURE RELiEF vALvE kit
Riser Module Body Size Victaulic Price
Nominal Inches Part Code Each
1 – 6 V000747K01 $322.00
21
FireLock System for Grooved iPS Pipe
www.victAULic.coM PL2011-A-FP
SEctio
n 1
FiR
ELock
SyStEM
FoR
GR
oo
vEd iP
S PiP
E
part code configuration guide
SERiES 247 And SERiES 747M
SERiES 247 And 747M RiSER ModULES PARt codE conFiGURAtion GUidE
Code Definition Options
A Class V : Fluid Control Devices
BBB Size (inlet x outlet x drain) Note 2 *
010 : 1” x 1” x 1”
012 : 1Z\v” x 1Z\v” x 1”
014 : 1Z\x” x 1Z\x” x 1”
020 : 2” x 2” x 1”
024 : 2Z\x” x 2Z\x” x 1Z\v”
030 : 3” x 3” x 1Z\v”
040 : 4” x 4” x 2”
060 : 6” x 6” x 2”
CCC Series 247 : Series 247 Residential Riser Module
747 : Series 747M Commercial Riser Module
D Finish P : Painted in Orange color
E Drain Type G : Grooved Connection
F : NPT Female Threaded Connection
F Trim Selection S : Standard Trim
G Approved Agency U : UL/FM
C : ULC/FM
HHH K Factor (Orifice) Note 3 *
028 (K2.8), 030 (K3.0), 035 (K3.5), 042 (K4.2), 049 (K4.9), 056 (K5.6), 069 (K6.9), 080 (K 8.0), 112 (K11.2), 140 (K14.0), 168 (K 16.8)
Notes
1. Example: “V040747PFSU56” denotes a Series 747M Commercial Zone Control Riser Module painted in orange color; 4” grooved inlet/4” grooved outlet/2” grooved drain connection; standard trim; UL/FM approved; with K5.6 flow restrictor.
2. Available sizes for Series 247 Residential Riser Modules : 010, 012, 014, 020
Available sizes for Series 747M Commercial Riser Modules : 012, 014, 020, 024, 030, 040, 060
3. Approved K Factors for 1” to 2” Series 247 Residential Riser Modules : 028, 030, 035, 042, 049, 056
Approved K Factors for 1” to 2” Series 747M Commercial Riser Modules : 056
Approved K Factors for 2Z\x” to 3” Series 747M Commercial Riser Modules : 056, 069, 080, 112
Approved K Factors for 4” to 6” Series 747M Commercial Riser Modules : 056, 069, 080, 112, 140, 168
series 735 fire pump test meter
fire pump test meter
SERiES 735Request publication 10.11.
FMAPPROVED
Request Victaulicpublication 10.01
for details.
SERiES 735 – ModEL S oR ModEL L
Nominal Size
Gallons Minute Style 735 Model S Style 735 Model L
Inches (GPM)Wgt. Ea.
Lbs Price EachWgt. Ea.
Lbs Price Each
2Z\x 100 9.0 $6971.00 14.0 $11253.50
2Z\x 150 9.0 6971.00 14.0 11253.50
3 200 10.0 7675.00 15.0 12033.50
4 250 12.0 8722.00 17.0 12530.50
4 300 12.0 8722.00 17.0 12530.50
4 450 12.0 8722.00 17.0 12530.50
5 500 13.0 9578.50 18.0 12591.00
6 750 15.0 10454.50 20.0 13709.50
6 1000 15.0 10454.50 20.0 13709.50
6 1250 15.0 10454.50 20.0 13709.50
8 1500 22.0 11844.00 27.0 15271.50
8 2000 22.0 11844.00 27.0 15271.50
8 2500 22.0 11844.00 27.0 15271.50
8 3000 22.0 11844.00 27.0 15271.50
10 3500 33.0 14109.50 38.0 17765.50
10 4000 33.0 14109.50 38.0 17765.50
10 4500 33.0 14109.50 38.0 17765.50
12 5000 66.0 17593.00 71.0 21762.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
www.victAULic.coM PL2011-A-FP22
FireLock System for Grooved iPS PipeSE
cti
on
1
FiR
ELo
ck
SyS
tEM
Fo
R G
Ro
ovE
d i
PS
PiP
E
section 2 – hole cut products
Hole cut Products
23www.victAULic.coM PL2011-A-FP
styles 920/920n mechanical-t® outlet
mechanical-t® outlet
StyLES 920 And 920nRequest publication 11.02.
StyLE 920 FEMALE
See Victaulicpublication 10.01
for details.
StyLE 920 – FEMALE tHREAdEd BRAncH
Size StyleComplete Mechanical-T
Female Threaded Branch † Spare Parts
Inches Run x Brch. Number
Aprx. Wgt. Ea.
Lbs
Price Each
Bolts & Nuts Size Inches
Standard Grade “E”
or “T” GasketsPainted Galv.
2 x Z\x 920N 3.1 $61.00 $77.00 Z\x x 2C\v $12.50
C\v 920N 3.1 61.00 77.00 Z\x x 2C\v 12.50
1 920N 3.0 61.00 77.00 Z\x x 2C\v 12.50
1Z\v 920N 3.5 70.50 88.00 Z\x x 2C\v 14.00
1Z\x 920N 3.6 70.50 88.00 Z\x x 2C\v 14.00
2Z\x x Z\x 920N 3.0 61.00 77.00 Z\x x 2C\v 12.50
C\v 920N 3.0 61.00 77.00 Z\x x 2C\v 12.50
1 920N 2.9 61.00 77.00 Z\x x 2C\v 12.50
1Z\v 920N 3.5 86.50 105.50 Z\x x 3Z\v 14.00
1Z\x 920N 3.6 86.50 105.50 Z\x x 3 14.00
3 x Z\x 920N 3.4 70.50 86.50 Z\x x 2C\v 12.50
C\v 920N 3.4 70.50 86.50 Z\x x 2C\v 12.50
1 920N 3.3 70.50 86.50 Z\x x 2C\v 12.50
1Z\v§ 920N 3.8 89.50 112.50 Z\x x 2C\v 14.00
1Z\x§ 920N 4.1 89.50 112.50 Z\x x 2C\v 14.00
2 § 920N 4.9 103.00 128.50 Z\x x 3Z\v 14.00
4 x Z\x 920N 3.7 89.00 106.50 Z\x x 2C\v 12.50
C\v 920N 3.7 89.00 106.50 Z\x x 2C\v 12.50
1 920N 3.6 89.00 106.50 Z\x x 2C\v 12.50
1Z\v 920N 4.0 104.50 123.50 Z\x x 2C\v 14.00
1Z\x 920N 4.2 109.00 137.00 Z\x x 2C\v 14.00
2 920N 5.0 109.00 138.00 Z\x x 2C\v 14.00
2Z\x 920 5.8 113.50 147.50 1 x 2C\v 16.50
3 920 8.4 121.00 155.50 1 x 3Z\v 18.00
5 x 1Z\x 920 7.7 133.00 168.50 B\, x 4C\v 14.00
2 920 8.2 133.00 168.50 B\, x 4C\v 14.00
2Z\x 920 8.3 140.50 179.00 B\, x 4C\v 16.50
3 920 8.4 149.50 192.50 B\, x 4C\v 18.00
6 x 1Z\v 920N – – – Z\x x 2C\v 14.00
1Z\x 920N 5.1 136.50 175.00 Z\x x 2C\v 14.00
2 920N 5.6 136.50 175.00 Z\x x 2C\v 14.00
2Z\x 920 7.6 147.00 190.00 B\, x 4C\v 16.50
3 920 8.4 156.00 201.00 B\, x 4C\v 18.00
4 920 10.1 173.00 225.50 B\, x 4C\v 24.50
8 x 2 920 11.6 238.50 301.50 C\v x 4Z\v 17.00
2Z\x 920 11.6 238.50 301.50 C\v x 4Z\v 17.00
3 920 12.6 252.00 319.50 C\v x 4Z\v 18.00
4 920 15.3 259.50 335.50 C\v x 4Z\v 24.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Vic-Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
www.victAULic.coM PL2011-A-FP24
Hole cut Products SE
cti
on
2
Ho
LE c
Ut
PR
od
Uc
tS
mechanical-t® outlet
StyLES 920/920nRequest publication 11.02.
StyLE 920 GRoovEd
See Victaulicpublication 10.01
for details.
StyLES 920/920n GRoovEd MEcHAnicAL-t oUtLEt
Size StyleComplete Mechanical-T
Grooved Branch Spare Parts
Inches Run x Brch. Number
Aprx. Wgt. Ea.
Lbs
Price Each
Bolts & Nuts Size Inches
Standard Grade “E”
or “T” GasketsPainted Galv.
2 x Z\x 920N – – – – –
C\v 920N – – – – –
1 920N – – – – $12.50
1Z\v 920N 3.5 $70.50 $88.00 Z\x x 2C\v 14.00
1Z\x 920N 3.2 70.50 88.00 Z\x x 2C\v 14.00
2Z\x x Z\x 920N – – – – –
C\v 920N – – – – –
1 920N – – – – 12.50
1Z\v 920N 3.2 86.50 105.50 Z\x x 3Z\v 14.00
1Z\x 920N 3.3 86.50 105.50 Z\x x 3 14.00
3 x Z\x 920N – – – – –
C\v 920N – – – – –
1 920N – – – – 12.50
1Z\v§ 920N 3.7 89.50 112.50 Z\x x 2C\v 14.00
1Z\x§ 920N 3.8 89.50 112.50 Z\x x 2C\v 14.00
2 § 920N 4.6 103.00 128.50 Z\x x 3Z\v 14.00
3Z\x x 2 920N 5.0 404.00 504.50 Z\x x 2C\v 14.00
4 x Z\x 920N – – – – –
C\v 920N – – – – –
1 920N – – – – 12.50
1Z\v 920N 3.6 104.50 123.50 Z\x x 2C\v 14.00
1Z\x 920N 3.9 109.00 137.00 Z\x x 2C\v 14.00
2 920N 4.6 109.00 138.00 Z\x x 2C\v 14.00
2Z\x 920 5.0 113.50 147.50 Z\x x 2C\v 16.50
3 920 6.4 121.00 155.50 Z\x x 3Z\v 18.00
5 x 1Z\x 920 7.6 133.00 + B\, x 4C\v 14.00
2 920 8.0 133.00 168.50 B\, x 4C\v 14.00
2Z\x 920 7.9 140.50 + B\, x 4C\v 16.50
3 920 8.8 149.50 192.50 B\, x 4C\v 18.00
6 x 1Z\v 920N 4.8 136.50 175.00 Z\x x 2C\v 14.00
1Z\x 920N 5.1 136.50 175.00 Z\x x 2C\v 14.00
2 920N 5.6 136.50 175.00 Z\x x 2C\v 14.00
2Z\x 920 8.3 149.50 190.00 B\, x 4C\v 16.50
3 920 9.9 156.00 201.00 B\, x 4C\v 18.00
4 920 10.1 173.00 225.50 B\, x 4C\v 24.50
8 x 2 920 11.4 238.50 + C\v x 4Z\v +
2Z\x 920 11.6 238.50 301.50 C\v x 4Z\v 17.00
3 920 11.6 252.00 319.50 C\v x 4Z\v 18.00
4 920 12.5 259.50 335.50 C\v x 4Z\v 24.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Vic-Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
25
Hole cut Products
www.victAULic.coM PL2011-A-FP
SEctio
n 2
H
oLE
cUt P
Ro
dU
ctS
Vic-tap ii
Vic-tap® ii * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x 2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Tool Model Part NumberShipping Weight
LbsRental
Per Month List Price
Vic-Tap II - Parts A and B only R-000-902-VT2 70 $3368.00 $7434.50
Part A only R-100-902-VT2 – – 5070.00
Part B only R-300-901-VT1 – – 5079.00
Part C 4 x 2Z\x R-016-931-010 – – 1489.50
5 x 2Z\x R-020-931-010 – – 1489.50
6 x 2Z\x R-024-931-010 – – 1489.50
8 x 2Z\x R-032-931-010 – – 1556.00
NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $531.00. Part. No. N-E15-000-004.
www.victAULic.coM PL2011-A-FP26
Hole cut Products SE
cti
on
2
Ho
LE c
Ut
PR
od
Uc
tS
mechanical-t cross
StyLE 920/920n *Request publication 11.03.
See Victaulicpublication 10.01
for details.
The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order.StyLES 920/920n MEcHAnicAL-t cRoSS
Nominal Size Inches Style
COMPLETE MECHANICAL-T CROSS with “E” or “T” Gasket †
Run x Branch
Number Painted Galv. A B
2 x 2 x Z\x x Z\x 920N $97.00 $124.50
Z\x x C\v 920N 111.00 143.00
Z\x x 1 920N 97.00 124.50
Z\x x 1Z\v 920N 111.00 143.00
Z\x x 1Z\x 920N 111.00 143.00
C\v x C\v 920N 111.00 143.00
C\v x 1 920N 97.00 124.50
C\v x 1Z\v 920N 111.00 143.00
C\v x 1Z\x 920N 111.00 143.00
1 x 1 920N 97.00 124.50
1 x 1Z\v 920N 111.00 143.00
1 x 1Z\x 920N 111.00 143.00
1Z\v x 1Z\v 920N 111.00 143.00
1Z\x x 1Z\v 920N 111.00 143.00
1Z\x x 1Z\x 920N 111.00 143.00
2Z\x x 2Z\x x Z\x x Z\x 920N 97.00 124.50
Z\x x C\v 920N 97.00 124.50
Z\x x 1 920N 97.00 124.50
Z\x x 1Z\v 920N 133.50 172.50
Z\x x 1Z\x 920N 133.50 184.50
C\v x C\v 920N 97.00 124.50
C\v x 1 920N 97.00 124.50
C\v x 1Z\v 920N 133.50 172.50
C\v x 1Z\x 920N 133.50 184.50
1 x 1 920N 97.00 124.50
1 x 1Z\v 920N 133.50 172.50
1 x 1Z\x 920N 133.50 172.50
1Z\v x 1Z\v 920N 133.50 172.50
1Z\x x 1Z\v 920N 133.50 172.50
1Z\x x 1Z\x 920N 133.50 143.00
3 x 3 x Z\x x Z\x 920N 109.00 140.50
Z\x x C\v 920N 109.00 140.50
Z\x x 1 920N 133.50 167.00
Z\x x 1Z\v 920N 133.50 167.00
Z\x x 1Z\x 920N 133.50 167.00
Z\x x 2 920N 154.50 191.50
* Style 920 and Style 920N housings cannot be mated to achieve cross connections.Refer to publication 21.03, or contact Victaulic for details.‡ Available grooved only.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
27
Hole cut Products
www.victAULic.coM PL2011-A-FP
SEctio
n 2
H
oLE
cUt P
Ro
dU
ctS
Nominal Size Inches Style
COMPLETE MECHANICAL-T CROSS with “E” or “T” Gasket †
Run x Branch
Number Painted Galv. A B
3 x 3 x C\v x C\v 920N $109.00 $140.50
C\v x 1 920N 133.50 167.00
C\v x 1Z\v 920N 133.50 167.00
C\v x 1Z\x 920N 133.50 167.00
C\v x 2 920N 154.50 191.50
1 x 1 920N 109.00 140.50
1 x 1Z\v 920N 133.50 133.50
1 x 1Z\x 920N 133.50 167.00
1 x 2 920N 154.50 191.50
1Z\v x 1Z\v§ 920N 133.50 167.00
1Z\x x 1Z\v§ 920N 133.50 167.00
1Z\x x 1Z\x§ 920N 133.50 167.00
2 x 1Z\v§ 920N 154.50 174.00
2 x 1Z\x 920N 154.50 191.50
2 x 2 § 920N 154.50 191.50
4 x 4 x Z\x x Z\x 920N 133.50 173.50
Z\x x C\v 920N 13350 173.50
Z\x x 1 920N 133.50 173.50
Z\x x 1Z\v 920N 162.00 203.50
Z\x x 1Z\x 920N 162.00 203.50
Z\x x 2 920N 173.50 205.00
C\v x C\v 920N 133.50 173.50
C\v x 1 920N 133.50 173.50
C\v x 1Z\v 920N 162.00 203.50
C\v x 1Z\x 920N 162.00 203.50
C\v x 2 920N 173.50 205.00
1 x 1 920N 133.50 173.50
1 x 1Z\v 920N 148.50 205.00
1 x 1Z\x 920N 173.50 203.50
1 x 2 920N 173.50 205.00
1Z\v x 1Z\v 920N 162.00 203.50
1Z\x x 1Z\v 920N 162.00 203.50
1Z\x x 1Z\x 920N 162.00 203.50
2 x 1Z\v 920N 173.50 205.00
2 x 1Z\x 920N 173.50 205.00
2 x 2 920N 173.50 205.00
2Z\x x 2Z\x 920 173.50 220.50
3 x 2Z\x 920 181.00 234.00
3 x 3 920 181.00 234.00
* Style 920 and Style 920N housings cannot be mated to achieve cross connections.Refer to publication 21.03, or contact Victaulic for details.‡ Available grooved only.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
www.victAULic.coM PL2011-A-FP28
Hole cut Products SE
cti
on
2
Ho
LE c
Ut
PR
od
Uc
tS
Nominal Size Inches Style
COMPLETE MECHANICAL-T CROSS with “E” or “T” Gasket †
Run x Branch
Number Painted Galv. A B
5 x 5 x 1Z\x x 1Z\x 920 $198.50 $252.00
2 x 1Z\x 920 209.00 252.00
2 x 2 920 198.50 252.00
2Z\x x 1Z\x 920 209.00 267.00
2Z\x x 2Z\x 920 209.00 267.00
3 x 1Z\x 920 224.00 287.50
3 x 2 920 224.00 287.50
3 x 2Z\x 920 224.00 287.50
3 x 3 920 224.00 287.50
6 x 6 x 1Z\v‡ x 1Z\v‡ 920N 203.00 261.50
1Z\x x 1Z\v‡ 920N 203.00 261.50
1Z\x x 1Z\x 920N 203.00 261.50
2 x 1Z\x 920N 203.00 261.50
2 x 2 920N 212.00 282.50
2Z\x x 2Z\x 920 218.50 282.50
3 x 2Z\x 920 233.00 299.50
3 x 3 920 233.00 299.50
4 x 2Z\x 920 258.00 335.50
4 x 3 920 258.00 335.50
4 x 4 920 258.00 335.50
8 x 8 x 2 x 2 920 357.00 451.00
2Z\x x 2 920 357.00 451.00
2Z\x x 2Z\x 920 357.00 451.00
3 x 2Z\x 920 376.00 478.50
3 x 3 920 376.00 478.50
4 x 2Z\x 920 388.50 502.50
4 x 3 920 388.50 502.50
4 x 4 920 388.50 502.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Style 920 and Style 920N housings cannot be mated to achieve cross connections.Refer to publication 21.03, or contact Victaulic for details.‡ Available grooved only.
+ Quoted on application. Contact Victaulic for pricing and availability.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
style 922 outlet tee
outlet tee
StyLE 922Request publication 10.52.
See Victaulicpublication 10.01
for details.
StyLE 922 – GRAdE “E” EPdM tyPE A GASkEt
Nominal Size Inches
Aprx. Wgt. Ea.
COMPLETE OUTLET-TEE Grade “E” Type A Gasket
COMPLETE OUTLET-TEE Grade “E” Type A Gasket
Branch x Run Lbs.
Price Each
Painted Galv.
1Z\v x Z\x 1.07 $13.50 $26.00
C\v 1.17 13.50 26.00
1 1.20 13.50 28.00
1Z\x x Z\x 1.15 13.50 26.00
C\v 1.20 13.50 26.00
1 1.42 13.50 28.50
2 x Z\x 1.30 13.50 28.50
C\v 1.37 13.50 28.50
1 1.50 14.00 32.50
2Z\x x Z\x 1.40 16.00 32.50
C\v 1.50 16.00 32.50
1 1.65 16.00 34.00
29
Hole cut Products
www.victAULic.coM PL2011-A-FP
SEctio
n 2
H
oLE
cUt P
Ro
dU
ctS
style 923 Vic-let™ strapless outlet
Vic-let™ strapless outlet
StyLE 923Request publication 11.05.
4 – 8”
10” – UP
vic-LEt StRAPLESS oUtLEt – witH GRAdE “E” GASkEt
Nominal SizeVIC-LET COMPLETE
With “E” or “T” Gasket *
InchesAprx. Wgt. Per Unit
LbsPrice
Per Unit
4 – 8 x Z\x NPT IPS 2.28 $151.50
4 – 8 x C\v NPT IPS 2.28 162.50
10 and larger x Z\x NPT IPS 2.16 151.50
10 and larger x C\v NPT IPS 2.16 162.50
* Available with Grade “T” Gasket. Contact Victaulic for details.
www.victAULic.coM PL2011-A-FP30
Hole cut Products SE
cti
on
2
Ho
LE c
Ut
PR
od
Uc
tS
section 3 – couplings, spare parts and fittings
couplings, Spare Parts and Fittings
31www.victAULic.coM PL2011-A-FP
style 07 Zero-flex® rigid coupling
grooved ips pipe couplings
Zero-flex® rigid coupling
StyLE 07
(with Style 77 gasket)Request publication 06.02.
See Victaulicpublication 10.01
for details.
StyLE 07 – GRAdE “E” oR “t” GASkEt oR FLUSHSEAL® GASkEt
PIPE
Apprx. Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or
“T” Gasket
COUPLING COMPLETE † with FlushSeal®
“E” or “T” Gasket SPARE PARTS
Inches
Lbs.
Price Each Price Each Plated Bolt & Nut
Nom. Size
Outside Dia. Painted Galv. Painted Galv. No. *
Size § Inches
1 1.315 1.6 $49.50 $62.50 $70.00 $83.50 2 C\, x 2
1Z\v 1.660 1.7 49.50 62.50 70.00 83.50 2 C\, x 2
1Z\x 1.900 1.9 49.50 62.50 70.00 83.50 2 C\, x 2
2 2.375 2.2 55.00 69.50 72.50 87.00 2 Z\x x 2Z\x
2Z\x 2.875 2.6 63.00 80.00 87.50 102.50 2 Z\x x 2C\v
3 3.500 3.0 73.00 93.50 92.50 113.50 2 Z\x x 2Z\x
4 4.500 4.8 102.00 132.00 129.50 160.00 2 Z\x x 2C\v
5 5.563 6.7 132.00 172.00 205.50 362.50 2 B\, x 3Z\v
6 6.625 8.3 174.00 226.00 242.50 296.50 2 B\, x 3Z\v
8 8.625 15.1 274.50 357.00 320.00 401.00 2 C\v x 4Z\v
10 10.750 23.5 452.50 604.50 544.00 692.00 2 M\, x 6Z\x
12 12.750 28.2 506.00 677.50 619.00 796.50 2 M\, x 6Z\x
§ Metric thread size bolts available. Contact Victaulic.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
style 177 QuickVic® flexible coupling for steel
QuickVic® flexible coupling for steel
StyLE 177Request publication 06.20.
StyLE 177 – GRAdE “EHP” oR “t” GASkEt
PIPEAprx.
Wgt. Ea.COUPLING COMPLETE †
With Grade “EHP” or “T” Gasket SPARE PARTS
Inches
Lbs
Price Each
Grade “EHP” or “T” Gasket
Nom. Size
Outside Dia. Painted Galv.
2 2.375 2.0 $55.50 $73.50 $43.00
2Z\x 2.875 2.4 64.50 90.50 47.00
3 3.500 3.1 72.00 100.00 53.50
4 4.500 3.7 103.50 146.50 72.00
5 5.563 4.8 157.00 226.00 102.50
6 6.625 6.3 186.00 267.00 121.00
8 8.625 10.5 302.50 450.00 176.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
www.victAULic.coM PL2011-A-FP32
couplings, Spare Parts and FittingsSE
cti
on
3
co
UPLi
nG
S, S
PAR
E P
AR
tS,
An
d F
itti
nG
S
style 77 standard flexible coupling
standard coupling
StyLE 77Request publication 06.04.
See Victaulicpublication 10.01
for details.
StyLE 77 – GRAdE “E” oR “t” GASkEt oR FLUSHSEAL GASkEt
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or “T”
Gasket
COUPLING COMPLETE † With FlushSeal®
“E” or “T” Gasket SPARE PARTS
Inches
Lbs
Price Each Price Each Plated Bolt & Nut
Nom. Size
Outside Dia. Painted Galv. Painted Galv. No.*
Size § Inches
C\v 1.050 1.1 $36.00 $48.50 $56.50 $69.50 2 C\, x 2
1 1.315 1.2 36.00 48.50 56.50 69.50 2 C\, x 2
1Z\v 1.660 2.0 47.50 63.50 69.50 86.50 2 Z\x x 2Z\x
1Z\x 1.900 2.1 51.50 67.50 73.00 90.50 2 Z\x x 2Z\x
2 2.375 2.6 55.50 73.50 76.00 95.50 2 Z\x x 2Z\x
2Z\x 2.875 3.1 64.50 90.50 93.00 118.50 2 Z\x x 2C\v
3 3.500 3.7 72.00 100.00 96.00 125.00 2 Z\x x 2C\v
3Z\x 4.000 5.6 102.50 144.50 138.50 182.00 2 B\, x 3Z\v
4 4.500 6.7 103.50 146.50 139.00 182.00 2 B\, x 3Z\v
5 5.563 10.5 157.00 226.00 243.50 316.00 2 C\v x 4Z\v
6 6.625 12.0 186.00 267.00 269.50 354.00 2 C\v x 4Z\v
8 8.625 20.8 302.50 450.00 364.00 499.50 2 M\, x 5
10 10.750 31.1 493.00 706.50 585.00 786.50 2 1 x 6
12 12.750 27.8 560.50 802.50 687.00 904.50 2 1 x 6Z\x
§ Metric thread size bolts available. Contact Victaulic.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
* Number of bolts equals number of segments supplied.
NOTE: See Spare Parts Section for spare part prices.
style 75 flexible coupling
flexible coupling
StyLE 75Request publication 06.05.
See Victaulicpublication 10.01
for details.
StyLE 75 – GRAdE “E” oR “t” GASkEt oR FLUSHSEAL GASkEt
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or “T”
Gasket
COUPLING COMPLETE † With FlushSeal®
“E” or “T” Gasket SPARE PARTS
Inches
Lbs
Price Each Price Each Plated Bolt & Nut
Nom. Size
Outside Dia. Painted Galv. Painted Galv.
Size § Inches
1 1.315 1.3 $36.50 $45.50 $58.50 $68.50 C\, x 2
1Z\v 1.660 1.4 37.50 48.50 61.00 73.00 C\, x 2
1Z\x 1.900 1.5 45.50 56.50 67.00 80.00 C\, x 2
2 2.375 1.8 55.50 73.50 68.50 82.00 C\, x 2
2Z\x 2.875 1.9 64.50 90.50 82.00 96.50 C\, x 2
3 3.500 2.9 72.00 100.00 87.00 104.50 Z\x x 2C\v
4 4.500 4.1 103.50 146.50 124.00 151.50 Z\x x 2C\v
5 5.563 5.8 157.00 226.00 211.50 252.00 B\, x 3Z\v
6 6.625 7.0 186.00 267.00 233.50 283.50 B\, x 3Z\v
8 8.625 12.9 302.50 450.00 388.50 466.00 C\v x 4Z\v
§ Metric thread size bolts available. Contact Victaulic.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
33
couplings, Spare Parts and Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 3
c
oU
PLin
GS, S
PAR
E PA
RtS, A
nd
FittinG
S
style 750 reducing coupling
reducing coupling
StyLE 750Request publication 06.08.
See Victaulicpublication 10.01
for details.
StyLE 750 – GRAdE “E” oR “t” GASkEt
PIPEAprx
Wgt. Ea.COUPLING COMPLETE †
With Grade “E” or “T” Gasket SPARE PARTS
Nominal Size
Lbs
Price Each Plated Bolt & Nut
Inches Painted Galv.Size § Inches
2 x 1 2.0 $91.50 $109.50 C\, x 2
1Z\x 2.0 74.00 89.00 C\, x 2
2Z\x x 2 2.9 95.50 119.50 C\, x 2
3 x 2 4.6 109.00 137.50 Z\x x 2C\v
2Z\x 4.1 94.00 119.50 Z\x x 2C\v
4 x 2 8.8 172.00 217.00 B\, x 3Z\v
2Z\x 8.3 154.50 203.00 B\, x 3Z\v
3 6.4 144.50 187.00 B\, x 3Z\v
5 x 4 10.8 194.00 255.00 C\v x 4Z\v
6 x 4 16.1 293.00 369.00 C\v x 4Z\v
5 12.6 256.50 332.50 C\v x 4Z\v
8 x 6 22.3 438.00 554.50 M\, x 5
10 x 8 32.0 562.00 712.00 1 x 6
§ Metric thread size bolts available. Contact Victaulic.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Support rings required on vertical installations. Please specify on order.
NOTE: See Spare Parts Section for spare part prices.
www.victAULic.coM PL2011-A-FP34
couplings, Spare Parts and FittingsSE
cti
on
3
co
UPLi
nG
S, S
PAR
E P
AR
tS,
An
d F
itti
nG
S
lubricant
lubricant LUBRICANT 4Z\x oz. Tube or 1 Quart Containers Price Each
PACK With 12 Tubes – 4Z\x oz. Each $274.50
CONTAINER One Quart – Container 119.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
To ensure easy assembly and service of all your Victaulic installations, be sure to include plenty of Victaulic Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold.
LUBRICANT USAGE GUIDE
Size of Gasket Inches
Number of Gaskets Size of Gasket Inches
Number of Gaskets Size of Gasket Inches
Number of Gaskets
Per Tube Per Quart Per Tube Per Quart Per Tube Per Quart
2 55 400 8 13 100 16 6 45
3 36 270 10 11 80 18 5 35
4 26 200 12 8 60 20 4 30
6 17 125 14 7 50 24 3 20
NOTE: Victaulic lubricant is not recommended for use with HDPE pipe.
gaskets
gaskets GASkEtS FoR StyLES 07, 75, 77 coUPLinGS
Nom. Size Standard Gaskets
Inches
Grade “E” EPDM or
Grade “T” Nitrile
FlushSeal Grade “E” or “T”
C\v $26.00 $50.00
1 26.00 50.00
1Z\v 27.50 52.50
1Z\x 29.50 53.50
2 29.50 54.50
2Z\x 34.50 67.00
3 37.50 67.00
3Z\x 47.00 86.50
5 60.50 158.00
6 65.50 162.00
8 89.50 168.00
10 112.50 216.00
12 131.00 257.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
35
couplings, Spare Parts and Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 3
c
oU
PLin
GS, S
PAR
E PA
RtS, A
nd
FittinG
S
SiLiconE GASkEtS FoR StyLES 07, 75, 77 coUPLinGS
Nom. Size Inches
Grade “L” Silicone
C\v $93.50
1 93.50
1Z\v 134.50
1Z\x 140.50
2 86.50
2Z\x 100.50
3 108.50
3Z\x +
4 157.50
4Z\x +
5 310.00
6 339.50
8 379.00
10 493.00
12 582.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
gaskets
NOTE: For pricing couplings complete with any special gaskets - take the standard coupling price with Grade “E” or “T” gas-ket complete (PL2011-A Main Price List), subtract the standard gasket price, then add on the price of the special gasket. Gasket recommendations can be found in the latest Victaulic Gasket Selection Guide (publication 05.01). This information is general in scope and Victaulic should be consulted for recommendations when a question arises.
StAndARd “E” oR “t” GASkEtS FoR StyLE 750
Nom. Size Inches Price Each
Run x Brch. “E” or “T”
2 x 1 $27.50
1Z\x 27.50
2Z\x x 2 36.00
3 x 2 41.00
2Z\x 41.00
4 x 2 47.50
2Z\x 48.00
3 50.00
5 x 4 58.00
6 x 4 66.00
5 72.00
8 x 6 80.00
10 x 8 96.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
metal liners
metal liners
StyLES 77 And 75 coUPLinGS
(Type 304 Stainless Steel)
StyLES 77 And 75 coUPLinGS
Nom. Size Inches Price Each
2 +
2Z\x +
3 +
4 +
5 +
6 +
8 +
10 +
Nom. Size Inches Price Each
2 +
2Z\x +
3 +
4 +
5 +
6 +
8 +
10 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
www.victAULic.coM PL2011-A-FP36
couplings, Spare Parts and FittingsSE
cti
on
3
co
UPLi
nG
S, S
PAR
E P
AR
tS,
An
d F
itti
nG
S
plated trackhead Bolts and nuts
plated trackhead Bolts and nuts
PLAtEd tRAckHEAd BoLtS And nUtS
Bolt and Nut Size Inches Price Each
C\, x 2 $13.00
Z\x x 2Z\x 13.50
2C\v 13.50
3 13.50
3Z\v 13.50
B\, x 2C\v 16.50
3Z\v 16.50
3Z\x 17.50
4 22.00
5 27.50
C\v x 4Z\v 19.00
5 25.50
M\, x 5 34.00
5Z\x 39.50
6Z\x 43.00
Bolt and Nut Size Inches Price Each
1 x 3Z\x $37.50
5 34.50
5Z\x 43.00
6 43.00
6Z\x 45.50
1Z\, x 4 58.50
5Z\x 58.50
1Z\v x 3Z\x 58.50
5Z\x 171.00
1C\, x 5C\v 200.00
1Z\x x 4Z\x 189.50
5C\v 213.50
1C\v x 6 374.50
1M\, x 6 495.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
go-no-go pipe tape
go-no-go tape Item Part No. Price Each Price Per Box *
Go-No-Go Tape (1) # RW75-100-MCH $54.00 –
Go-No-Go Tape (Box of 6) # RW75-100-KIT – $298.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Each box contains 6 Go-No-Go Tapes.
# Tool discount applies.
37
couplings, Spare Parts and Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 3
c
oU
PLin
GS, S
PAR
E PA
RtS, A
nd
FittinG
S
elbows –no. 12 - 22Z\x°, no. 13 - 11Z\v°
grooved ips pipe fittings
elbowsRequest publication 07.01.
no. 12 StAndARd & GooSEnEck
no. 13
ELBowS – 22Z\x° ELBow oR 11Z\v° ELBow
Nom. Size 22Z\x° Elbow No. 12 11Z\v° Elbow No. 13
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.
1 0.6 ‡ 3.25 $414.50 $429.00 0.3 (sw) 1.38 $165.00 +
1Z\v 0.8 1.75 71.50 90.50 0.5 1.38 71.50 $90.50
1Z\x 0.8 1.75 71.50 90.50 0.5 1.38 71.50 90.50
2 1.4 ‡ 3.75 71.50 90.50 1.0 1.38 165.00 193.00
2Z\x 1.5 ‡ 4.00 71.50 90.50 1.5 1.50 165.00 193.00
3 3.1 ‡ 4.50 102.50 129.00 2.1 1.50 102.50 128.00
3Z\x 4.0 (sw) 2.50 241.00 322.50 2.7 (sw) 1.75 241.00 284.50
4 5.6 2.88 136.00 176.50 3.6 1.75 126.00 167.50
5 7.8 (sw) 2.88 417.50 503.50 5.0 (sw) 2.00 417.50 491.00
6 12.2 ‡ 6.25 381.50 486.50 7.0 2.00 381.50 461.50
8 20.0 ‡ 7.75 796.00 988.50 10.1 2.00 680.00 808.00
10 30.0 4.38 1090.50 1416.00 11.8 2.13 1018.00 1215.00
12 40.0 4.88 1474.00 1827.50 29.3 2.25 1474.00 1785.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
+ Quoted on application. Contact Victaulic for pricing and availability.
‡ Gooseneck design.
no. 100 and no. 110 1Z\x d long radius elbows
long radius - 1Z\x d elbowsRequest publication 07.01.
no. 100
no. 110
LonG RAdiUS – 90° LonG RAdiUS ELBow oR 45° LonG RAdiUS ELBow
Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.
2 2.5 4.38 $149.00 $195.00 1.8 2.75 $129.00 $163.50
2Z\x 4.1 5.13 186.50 214.00 2.8 3.13 413.50 465.50
3 6.0 5.88 149.00 195.00 4.9 3.38 129.00 163.50
4 12.3 7.50 221.50 296.50 7.3 4.00 157.00 209.00
5 (s) 18.2 9.25 1126.50 1290.50 14.8 4.88 1046.00 1148.00
6 30.4 10.75 644.50 846.50 17.4 5.50 462.50 592.50
8 66.0 14.25 1540.50 1969.50 36.0 7.25 803.50 1044.50
10 107.0 15.00 3191.00 3846.50 57.0 6.25 2393.50 2729.50
12 156.0 18.00 3224.50 4279.00 90.0 7.50 2771.50 3402.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(s) steel. Victaulic fittings are made of ductile iron, except those marked (s)
www.victAULic.coM PL2011-A-FP38
couplings, Spare Parts and FittingsSE
cti
on
3
co
UPLi
nG
S, S
PAR
E P
AR
tS,
An
d F
itti
nG
S
no. 29m tee with threaded Branch
teeRequest publication 07.01.
no. 29M
tEE witH tHREAdEd BRAncH
Nom. SizeAprx.
Wgt. Ea.
Tee with Male Threaded Branch No. 29M
Inches Lbs
Price Each
Painted Galv.
C\v 0.6 + +
1 1.0 – –
1Z\v 1.5 $213.00 $250.50
1Z\x 2.0 332.50 392.00
2 3.0 213.00 250.50
3Z\x 7.9 (sw) + +
4 11.9 441.50 607.00
5 17.8 1269.50 +
6 25.7 1133.50 1334.00
8 47.6 + +
10 73.0 + +
12 99.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
+ Quoted on application. Contact Victaulic for pricing and availability.
no. 35 cross, no. 33 true y
cross and WyeRequest publication 07.01.
no. 35
no. 33
cRoSS And wyE – StEEL cRoSS oR StEEL 90 tRUE y
Nom. SizeSteel Cross (sw)
No. 35Steel 90 True Y (sw)
No. 33
Inches
Aprx Wgt. Ea.
Lbs
Price Each Aprx Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.
C\v 0.9 + + – – –
1 1.3 $245.50 $283.50 1.1 $377.00 +
1Z\v 2.1 295.50 344.00 1.5 377.00 +
1Z\x 2.5 318.50 369.50 1.8 377.00 $448.50
2 3.8 (d) 181.50 216.50 2.5 377.00 448.50
2Z\x 6.1 (d) 181.50 216.50 4.3 377.00 448.50
3 10.5 (d) 323.50 396.00 6.1 450.50 536.00
3Z\x 11.5 650.50 775.50 9.6 + +
4 15.8 (d) 537.00 660.50 10.0 590.00 709.50
4Z\x 18.5 + + – – –
5 20.0 1094.00 1319.00 15.0 844.50 1014.50
6 28.0 1405.00 1705.50 22.3 1043.50 1270.50
8 48.0 1851.00 2289.50 36.0 1502.50 1846.50
10 121.5 3153.50 3900.50 69.9 2591.00 3174.50
12 110.0 4550.50 5669.50 80.0 2862.00 3620.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
+ Quoted on application. Contact Victaulic for pricing and availability.
39
couplings, Spare Parts and Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 3
c
oU
PLin
GS, S
PAR
E PA
RtS, A
nd
FittinG
S
no(s). 40, 42, and 43 adapter nipples
adapter nipples ‡
Same prices apply for: No. 40 Grooved x Threaded No. 42 Grooved x Beveled No. 43 Grooved x GroovedRequest publication 07.01.
no. 40
no. 42
no. 43
AdAPtER niPPLES – GRoovEd x tHREAdEd, GRoovEd x BEvELEd, oR GRoovEd x GRoovEd
Nom. Size Price Per Length Inches
Inches 3 4 6 8 10 12
C\v $39.50 $39.50 + + + +
1 39.50 39.50 $62.50 + + +
1Z\v 39.50 39.50 62.50 + + +
1Z\x 39.50 39.50 62.50 $72.50 $83.00 $95.00
2 39.50 39.50 62.50 72.50 83.00 95.00
2Z\x 45.50 45.50 83.50 83.50 97.50 111.00
3 55.50 55.50 90.00 108.50 126.50 144.00
4 91.00 91.00* 91.00 150.00 176.50 203.00
5 188.00* 188.00* 188.00 262.00 323.50 372.00
6 241.50 241.50* 241.50* 312.00 362.50 412.00
8 270.50* 270.50* 270.50* 360.00 494.00 555.50
10 363.00* 363.00* 365.50* 393.50 607.50 722.50
12 493.50* 493.50* 493.50* 493.50 769.00 916.00
Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6” and smaller are made from Schedule 40 pipe; for nominal sizes 8” and larger, from Schedule 30 pipe. NOTE: For Pump Package Nipples with 1 Z\x” hole cut to receive Style 923 Vic-Let or Style 924 Vic-O-Well add $93.00 to No. 40, 42 or 43 Nipple prices and request No. 40-H, 42-H or 43-H on order. No. 40-H, 42-H and 43-H are non-cancellable and non-returnable.* These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved.
Special lengths not shown, heavier wall thickness, electroplated and galvanized nipples are priced on application.GALVANIZED AND EXTRA HEAVY ARE NON-CANCELLABLE AND NON-RETURNABLE ITEMS.‡ Contact Victaulic for pricing on seamless adapter nipples.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.
no. 80 female threaded adapter
female threaded adapterRequest publication 07.01.
no. 80
FEMALE tHREAdEd AdAPtER
Nom. SizeAprx.
Wgt. EachNo. 80
Price Each
Inches Lbs Painted Galv.
C\v 1.0 $339.50 $376.00
1 1.0 363.50 390.50
1Z\v 1.5 192.00 215.00
1Z\x 1.5 249.00 265.00
2 1.4 117.50 137.50
2Z\x 1.5 117.50 137.50
3 2.9 136.00 166.50
4 4.5 208.50 261.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
www.victAULic.coM PL2011-A-FP40
couplings, Spare Parts and FittingsSE
cti
on
3
co
UPLi
nG
S, S
PAR
E P
AR
tS,
An
d F
itti
nG
S
no(s). 18 and 19 adapter elbows
adapter elbowsRequest publication 07.01.
no. 18
no. 19
AdAPtER ELBowS – 90° AdAPtER ELBow oR 45° AdAPtER ELBow
Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.
C\v 0.5 $169.00 $180.00 0.5 $172.00 $182.00
1 0.5 113.00 140.50 0.6 – –
1Z\v 0.9 126.50 140.50 0.6 – –
1Z\x 1.1 161.50 187.50 0.9 186.50 199.50
2 2.5 113.00 140.50 1.9 – –
2Z\x 3.0 196.50 215.00 2.3 192.00 198.50
3 5.8 182.00 223.50 5.0 328.00 351.50
6 17.6 564.50 714.50 12.7 687.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
+ Quoted on application. Contact Victaulic for pricing and availability.
41
couplings, Spare Parts and Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 3
c
oU
PLin
GS, S
PAR
E PA
RtS, A
nd
FittinG
S
no. 25 grooved reducing tee
reducing teeRequest publication 07.01.
no. 25
REdUcinG tEE
Size Reducing Tee No. 25
Inches Aprx. Wgt. Each
Lbs
Price Each
Run x Branch Painted Galv.
1 x 1 x C\v 1.0 $174.00 $204.00
1Z\v x 1Z\v x 1 1.3 179.50 204.00
1Z\x x 1Z\x x C\v 1.5 181.50 +
1 1.5 250.00 257.00
1Z\v 1.7 189.00 209.50
2 x 2 x C\v (d) 2.5 235.50 277.50
1 (d) 2.7 215.00 252.00
1Z\v 1.8 268.50 282.00
1Z\x (d) 3.0 215.00 256.00
2Z\x x 2Z\x x C\v 3.9 290.00 314.50
1 (d) 3.8 215.00 252.00
1Z\v 4.2 324.00 381.50
1Z\x (d) 3.9 215.00 256.00
2 (d) 4.5 215.00 256.00
3 x 3 x C\v (d) 5.7 335.00 349.00
1 (d) 6.1 189.50 242.50
1Z\v 8.0 266.50 352.50
1Z\x (d) 6.5 189.50 244.50
2 (d) 6.2 189.50 244.50
2Z\x (d) 6.4 189.50 244.50
4 x 4 x C\v (d) 8.0 427.50 457.00
1 (d) 7.8 256.00 319.50
1Z\v 9.6 503.50 586.50
1Z\x (d) 10.2 256.00 319.50
2 (d) 11.2 256.00 336.00
2Z\x (d) 11.4 256.00 336.00
3 (d) 11.6 256.00 336.00
5 x 5 x 1 14.0 563.50 694.00
1Z\x 14.3 716.00 775.50
2 14.5 620.50 766.50
2Z\x (d) 15.2 505.50 636.50
3 (d) 16.6 505.50 636.50
4 (d) 16.7 547.00 691.00
6 x 6 x 1 23.0 680.00 834.00
1Z\x 24.0 702.50 962.50
2 (d) 21.6 602.00 791.00
2Z\x (d) 21.4 602.00 791.00
3 (d) 26.5 602.00 791.00
4 (d) 25.0 602.00 791.00
5 (d) 23.2 602.00 796.00
8 x 8 x 1Z\x 33.0 868.00 1056.50
2 33.5 868.00 1096.00
2Z\x 39.0 868.00 1096.00
3 33.6 935.00 1118.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
www.victAULic.coM PL2011-A-FP42
couplings, Spare Parts and FittingsSE
cti
on
3
co
UPLi
nG
S, S
PAR
E P
AR
tS,
An
d F
itti
nG
S
Size Reducing Tee No. 25
Inches Aprx. Wgt. Each
Lbs
Price Each
Run x Branch Painted Galv.
8 x 8 x 4 (d) 41.8 $1255.00 $1621.50
5 34.0 1255.00 1632.50
6 (d) 42.3 1255.00 1639.50
10 x 10 x 1Z\x 62.0 2139.00 2864.50
2 62.0 1512.00 2295.00
2Z\x 62.4 1512.00 1905.50
3 60.0 1512.00 2405.50
4 61.0 1580.50 2020.00
5 52.0 1615.50 2062.50
6 59.0 1615.50 2623.00
8 64.7 1645.00 2636.00
12 x 12 x 1 77.0 2035.50 +
2 80.0 3059.50 3698.50
2Z\x 78.0 2035.50 +
3 82.0 2035.50 2627.00
4 80.0 2180.50 3067.50
5 75.0 2305.50 2994.50
6 75.0 2333.50 3423.00
8 80.0 2398.00 3626.50
10 84.0 2510.00 3903.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
43
couplings, Spare Parts and Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 3
c
oU
PLin
GS, S
PAR
E PA
RtS, A
nd
FittinG
S
no. 29t threaded reducing tee
reducing tee with threaded BranchRequest publication 07.01.
no. 29t
REdUcinG tEE witH tHREAdEd BRAncH *
Size Reducing Tee No. 29T with Threaded Branch
Inches Aprx. Wgt. Each
Lbs
Price Each
Run x Branch Painted Galv.
2 x 2 x C\v (d) 2.5 $249.50 $293.00
1 (d) 2.7 227.00 266.50
1Z\v 2.9 382.00 408.50
1Z\x (d) 3.0 227.00 269.50
2Z\x x 2Z\x x C\v 3.5 446.00 460.50
1 (d) 3.8 227.00 266.50
1Z\v 3.8 496.50 510.50
1Z\x (d) 3.9 227.00 269.50
2 4.5 227.00 272.00
3 x 3 x C\v 5.9 417.00 442.50
1 (d) 6.1 227.00 284.00
1Z\v 6.3 560.50 596.00
1Z\x (d) 6.5 227.00 286.00
2 (d) 6.2 227.00 286.00
2Z\x (d) 6.4 547.50 593.00
4 x 4 x C\v 7.2 605.00 744.50
1 (d) 7.8 284.00 350.00
1Z\v 8.5 583.50 629.00
1Z\x (d) 9.2 284.00 356.00
2 (d) 11.2 284.00 356.00
2Z\x (d) 11.4 284.00 366.00
3 (d) 11.6 284.00 367.50
5 x 5 x 2 14.5 607.50 662.50
2Z\x (d) 15.2 546.50 692.00
3 16.6 505.50 636.50
4 16.7 546.50 744.50
6 x 6 x 1 23.0 829.50 964.00
1Z\x 25.0 733.50 923.00
2 (d) 21.6 709.00 883.50
2Z\x (d) 21.4 709.00 883.50
3 (d) 26.5 709.00 883.50
4 (d) 25.0 896.50 964.00
5 23.2 709.00 883.50
8 x 8 x 2 33.5 868.00 1197.50
3 33.6 1197.50 1553.00
4 (d) 41.8 1255.00 1621.50
5 34.0 1255.00 1631.50
6 (d) 42.3 1388.00 1907.00
10 x 10 x 2 62.0 1511.50 2208.00
3 60.0 1511.50 1875.00
4 61.0 1580.50 2020.00
5 52.0 1389.50 2062.50
6 59.0 1615.50 2089.00
8 64.7 2179.00 2436.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
www.victAULic.coM PL2011-A-FP44
couplings, Spare Parts and FittingsSE
cti
on
3
co
UPLi
nG
S, S
PAR
E P
AR
tS,
An
d F
itti
nG
S
Size Reducing Tee No. 29T with Threaded Branch
Inches Aprx. Wgt. Each
Lbs
Price Each
Run x Branch Painted Galv.
12 x 12 x 3 80.0 $2035.50 $2627.50
4 82.0 2180.50 2800.50
5 75.0 2305.50 2994.50
6 75.0 2333.50 3022.50
8 80.0 2398.50 3092.50
10 84.0 2510.00 3097.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
+ Quoted on application. Contact Victaulic for pricing and availability.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
no. 50 concentrc reducers, no. 51 eccentric reducers
reducersRequest publication 07.01.
no. 50
no. 51
REdUcERS – concEntRic oR EccEntRic *
Size Concentric Reducer No. 50 Eccentric Reducer No. 51
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.
1Z\v x C\v 1.9 $295.50 $324.00 3.2 + +
1 1.9 309.50 340.50 3.2 + +
1Z\x x C\v 1.4 348.50 376.50 4.5 + +
1 0.8 (d) 76.50 90.00 4.5 $326.50 $382.00
1Z\v 1.0 (d) 76.50 90.00 4.5 319.00 +
2 x C\v 0.9 (d) 76.50 90.00 2.0 + +
1 0.7 (d) 76.50 90.00 2.3 360.00 404.00
1Z\v 1.2 (d) 83.50 98.50 4.6 393.50 +
1Z\x 1.0 (d) 76.50 90.00 4.6 80.00 94.50
2Z\x x C\v 1.3 606.50 654.50 3.3 911.50 1027.00
1 3.3 104.00 120.00 3.5 849.00 940.00
1Z\v 3.3 (d) 76.50 90.00 3.5 85.00 99.00
1Z\x 3.6 (d) 76.50 90.00 3.7 392.50 448.50
2 3.9 (d) 76.50 90.00 4.3 (d) 160.00 218.00
3 x C\v 1.5 610.00 682.00 4.8 + +
1 1.3 (d) 83.50 102.00 4.8 911.00 1002.00
1Z\v 3.0 134.50 155.00 4.8 825.00 +
1Z\x 5.1 (d) 92.50 112.50 5.1 453.00 530.00
2 1.6 (d) 67.50 82.50 6.0 (d) 182.50 250.00
2Z\x 1.6 (d) 92.50 111.50 7.0 (d) 182.50 256.00
3Z\x x 3 2.0 (d) 98.00 118.50 7.0 1000.50 +
4 x 1 2.4 (d) 101.50 125.00 6.5 1844.00 +
1Z\v 4.6 780.50 874.50 – – –
1Z\x 6.9 (d) 140.50 185.50 8.1 1115.50 1204.50
2 2.4 (d) 90.00 110.50 8.0 (d) 223.00 311.50
2Z\x 2.7 (d) 111.50 135.50 7.6 (d) 223.00 311.50
3 2.5 (d) 111.50 135.50 7.8 (d) 223.00 311.50
3Z\x 2.9 (d) 111.50 135.50 8.0 1561.50 +
5 x 2 9.0 1098.00 1212.50 5.2 1230.00 +
2Z\x 11.0 227.00 277.00 10.8 1048.50 +
3 4.9 (d) 129.00 160.00 11.1 1013.00 1129.00
4 4.3 (d) 154.00 193.00 12.0 (d) 303.00 427.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
45
couplings, Spare Parts and Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 3
c
oU
PLin
GS, S
PAR
E PA
RtS, A
nd
FittinG
S
Size Concentric Reducer No. 50 Eccentric Reducer No. 51
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.
6 x 1 5.0 (d) $204.00 $254.50 14.5 $1910.50 $2074.50
1Z\x 5.5 + + + + +
2 6.6 (d) 204.00 254.50 14.5 1742.50 1897.50
2Z\x 14.2 (d) 227.00 279.00 14.2 2074.50 2258.50
3 6.4 (d) 204.00 254.50 15.0 (d) 402.50 564.50
4 6.5 (d) 178.50 231.00 17.0 (d) 353.00 518.50
5 6.4 (d) 263.00 327.00 17.0 (d) 423.00 600.00
8 x 3 9.3 (d) 363.50 453.00 22.0 2024.00 2204.50
4 10.4 (d) 363.50 455.50 23.0 1769.50 2019.00
5 11.6 (d) 363.50 458.50 23.0 1769.50 2019.00
6 11.9 (d) 462.00 578.50 24.0 (d) 712.50 969.50
10 x 4 19.7 (d) 861.00 1060.00 32.0 3245.00 3891.50
5 36.3 1895.00 2162.00 34.0 3056.50 3597.50
6 20.0 (d) 941.50 1174.00 36.9 2305.50 2733.00
8 22.1 (d) 941.50 1194.00 40.3 1951.50 2427.00
12 x 4 44.0 4123.50 4907.50 48.0 3408.50 +
6 24.6 (d) 1123.00 1388.00 50.0 3079.50 3709.00
8 52.0 (d) 1685.00 1989.50 53.5 3001.00 3591.50
10 38.0 (d) 1685.00 2086.00 57.0 2687.50 3187.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
www.victAULic.coM PL2011-A-FP46
couplings, Spare Parts and FittingsSE
cti
on
3
co
UPLi
nG
S, S
PAR
E P
AR
tS,
An
d F
itti
nG
S
no. 52 reducer – male threaded small end
reducer - male threaded small endRequest publication 07.01.
no. 52
REdUcER – MALE tHREAdEd SMALL End
Nominal Size
Aprx. Wgt. Ea. Price Each
Inches Inlet x Outlet Lbs Painted Galv.
1Z\x x 1 0.8 $80.00 $98.00
1Z\v 0.8 83.50 98.50
2 x C\v 0.9 80.00 98.00
1 0.7 80.00 98.00
1Z\v 1.2 80.00 98.00
1Z\x 1.0 80.00 98.00
2Z\x x 1 1.0 108.00 124.50
1Z\v 1.2 113.00 139.50
1Z\x 1.3 118.50 139.50
2 1.4 80.00 98.00
3 x C\v (s) 1.2 574.50 611.50
1 1.3 87.00 104.50
1Z\x 1.5 98.00 117.50
2 1.5 98.00 117.50
2Z\x 1.7 118.50 139.50
4 x 1 2.3 112.00 135.50
1Z\x (s) 2.5 262.50 343.50
2 2.6 119.00 143.00
2Z\x 2.6 119.50 147.00
3 2.5 146.50 173.50
5 x 4 (s) 4.5 832.00 905.50
6 x 1 5.5 227.00 279.00
2 5.7 227.00 279.00
2Z\x 5.8 227.00 279.00
3 5.8 227.00 279.00
4 (s) 6.5 1366.50 1514.00
5 (s) 17.5 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
+ Quoted on application. Contact Victaulic for pricing and availability.
(s) steel. Victaulic fittings are made of ductile iron, except those marked (s)
47
couplings, Spare Parts and Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 3
c
oU
PLin
GS, S
PAR
E PA
RtS, A
nd
FittinG
S
www.victAULic.coM PL2011-A-FP48
section 4 – aquaflex stainless steel sprinkler fittings
AquaFlex® Stainless Steel Sprinkler Fittings
49www.victAULic.coM PL2011-A-FP
series aQB Braided flexible hose assembly
series aQB
BRAidEd FLExiBLE HoSE ASSEMBLy witH BRAckEt, HoSE And Z\x” oR C\v” REdUcERRequest publication 10.85.
SERiES AQB witH 24” BEE BRAckEt
Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Lbs. Part No. Quantity Each
31 x Z\x 3.49 A31HAQFBEB 10 $73.00
C\v 3.49 A31TAQFBEB 10 73.00
48 x Z\x 3.99 A48HAQFBEB 10 80.00
C\v 3.99 A48TAQFBEB 10 80.00
60 x Z\x 4.19 A60HAQFBEB 10 88.00
C\v 4.19 A60TAQFBEB 10 88.00
72 x Z\x 4.29 A72HAQFBEB 10 96.50
C\v 4.29 A72TAQFBEB 10 96.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERiES AQB witH 48” BEE BRAckEt
Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Lbs. Part No. Quantity Each
31 x Z\x 3.69 A31HAQFB48 10 $78.50
C\v 3.69 A31TAQFB48 10 78.50
48 x Z\x 3.84 A48HAQFB48 10 85.50
C\v 3.84 A48TAQFB48 10 85.50
60 x Z\x 4.29 A60HAQFB48 10 94.00
C\v 4.29 A60TAQFB48 10 94.00
72 x Z\x 4.69 A72HAQFB48 10 102.00
C\v 4.69 A72TAQFB48 10 102.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
series aQB Braided flexible hose assembly with hat furring channel
series aQB
BRAidEd FLExiBLE HoSE ASSEMBLy witH HAt FURRinG cHAnnEL, HoSE And Z\x” oR C\v” REdUcERRequest publication 10.85.
SERiES AQB witH 24” 1-BEE2 BRAckEt FoR HAt FURRinG cHAnnEL
Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Lbs. Part No. Quantity Each
31 x Z\x 3.93 A31HAQFBHB 10 $90.50
C\v 3.93 A31TAQFBHB 10 90.50
48 x Z\x 4.08 A48HAQFBHB 10 98.00
C\v 4.08 A48TAQFBHB 10 98.00
60 x Z\x 4.53 A60HAQFBHB 10 106.00
C\v 4.53 A60TAQFBHB 10 106.00
72 x Z\x 4.93 A72HAQFBHB 10 114.00
C\v 4.93 A72TAQFBHB 10 114.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
www.victAULic.coM PL2011-A-FP50
AquaFlex Stainless Steel Sprinkler Fittings SE
cti
on
4
AQU
AFL
Ex
StA
inLE
SS
StE
EL S
PR
ink
LER
Fit
tin
GS
series aQu unbraided flexible hose assembly
series aQu
UnBRAidEd FLExiBLE HoSE ASSEMBLy witH BRAckEt, HoSE And Z\x” oR C\v” REdUcERRequest publication 10.85.
2443
SERiES AQU witH 24” BEE BRAckEt
Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Lbs. Part No. Quantity Each
31 x Z\x 3.19 A31HAQFBEE 10 $54.00
C\v 3.19 A31TAQFBEE 10 56.00
48 x Z\x 3.34 A48HAQFBEE 10 64.50
C\v 3.34 A48TAQFBEE 10 66.50
60 x Z\x 3.69 A60HAQFBEE 10 72.50
C\v 3.69 A60TAQFBEE 10 74.50
72 x Z\x 4.19 A72HAQFBEE 10 81.00
C\v 4.19 A72TAQFBEE 10 83.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERiES AQU witH 48” BEE BRAckEt
Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Lbs. Part No. Quantity Each
31 x Z\x 3.69 A31HAQFU48 10 $59.50
C\v 3.69 A31TAQFU48 10 62.50
48 x Z\x 3.84 A48HAQFU48 10 71.00
C\v 3.84 A48TAQFU48 10 73.00
60 x Z\x 4.29 A60HAQFU48 10 78.00
C\v 4.29 A60TAQFU48 10 80.50
72 x Z\x 4.69 A72HAQFU48 10 87.00
C\v 4.69 A72TAQFU48 10 89.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
51
AquaFlex Stainless Steel Sprinkler Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 4
AQ
UA
FLEx S
tAin
LES
S S
tEEL SPR
ink
LER Fittin
GS
BillTo:
ShipTo:
TagEmailPhone No.
Fax No.
State
Company Name
Quantity (as specified below): If units of different size, type or other option are required, please attach additional form(s) with their specification(s) separately.
NOTE: For Concealed Pendent sprinklers, Cover Plate is not included in cost of product and must be ordered seprately.
Address
Order No.
Company Name
Address
StateZip Code Zip Code
DateThis form must be filled out completely with each order and sent alongwith your purchase order. Please FAX to Customer Care – 877-766-9769.
SprinklerFrame Class Style K Factor Finish Hose Length Undefined Deflector Style Temperature
Bulb/Response
BracketType
3 - 31" 2 - 24" 00
4 - 48" 4 - 48"
4 - White 6 - 60"
7 - 72"
AquaFlex® Pre-Assembled System Order Form
A - AquaFlex AUH - Unbraided Hose
ABH - Braided Hose
27
38
B - Pendent C - 155°F/68°C 4 - K5.6
P - Concealed Pendent
Q - Quick
S - Standard
1 - Brass
2 - Chrome
www.victAULic.coM PL2011-A-FP52
AquaFlex Stainless Steel Sprinkler Fittings SE
cti
on
4
AQU
AFL
Ex
StA
inLE
SS
StE
EL S
PR
ink
LER
Fit
tin
GS
series aQB and aQu aquaflex flexible sprinkler fittings with pre-assembled sprinklers
pre-assembled series aQB and aQu
AQUAFLEx FLExiBLE SPRinkLER FittinGS witH PRE-ASSEMBLEd SPRinkLERSRequest publication 10.85.
SERiES AQB BRAidEd FLExiBLE SPRinkLER FittinG witH PRE-ASSEMBLEd SPRinkLER
Hose Length Bracket Length Aprx. Wgt. Ea. Sprinkler Price Each
Inches Inches Lbs. Model No. White Painted Chrome Plated Brass
31 24 4.6 V2707 $98.50 $98.50 –
4.6 V2708 101.50 101.50 –
4.6 V3802 – – $114.00
48 4.6 V2707 104.50 104.50 –
4.6 V2708 107.50 107.50 –
4.6 V3802 – – 120.00
48 24 5.1 V2707 106.00 106.00 –
5.1 V2708 108.50 108.50 –
5.1 V3802 – – 121.50
48 5.1 V2707 111.50 111.50 –
5.1 V2708 114.50 114.50 –
5.1 V3802 – – 126.50
60 24 5.3 V2707 114.00 114.00 –
5.3 V2708 117.00 117.00 –
5.3 V3802 – – 130.00
48 5.3 V2707 120.00 120.00 –
5.3 V2708 123.00 123.00 –
5.3 V3802 – – 135.00
72 24 5.4 V2707 122.50 122.50 –
5.4 V2708 125.00 125.00 –
5.4 V3802 – – 137.00
48 5.4 V2707 127.50 127.50 –
5.4 V2708 131.50 131.50 –
5.4 V3802 – – 143.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERiES AQU UnBRAidEd FLExiBLE SPRinkLER FittinG witH PRE-ASSEMBLEd SPRinkLER
Hose Length Bracket Length Aprx. Wgt. Ea. Sprinkler Price Each
Inches Inches Lbs. Model No. White Painted Chrome Plated Brass
31 24 4.3 V2707 $80.00 $80.00 –
4.3 V2708 83.00 83.00 –
4.3 V3802 – – $95.50
48 4.3 V2707 85.50 85.50 –
4.3 V2708 88.50 88.50 –
4.3 V3802 – – 101.00
48 24 4.5 V2707 90.50 90.50 –
4.5 V2708 93.50 93.50 –
4.5 V3802 – – 106.00
48 4.5 V2707 96.50 96.50 –
4.5 V2708 99.50 99.50 –
4.5 V3802 – – 111.50
60 24 4.8 V2707 98.00 98.00 –
4.8 V2708 101.00 101.00 –
4.8 V3802 – – 113.50
48 4.8 V2707 104.00 104.00 –
4.8 V2708 107.00 107.00 –
4.8 V3802 – – 119.50
72 24 5.3 V2707 107.00 107.00 –
5.3 V2708 110.00 110.00 –
5.3 V3802 – – 122.50
48 5.3 V2707 113.00 113.00 –
5.3 V2708 115.50 115.50 –
5.3 V3802 – – 127.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
53
AquaFlex Stainless Steel Sprinkler Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 4
AQ
UA
FLEx S
tAin
LES
S S
tEEL SPR
ink
LER Fittin
GS
series aQi Braided flexible hose assembly, for institutional applications
series aQi
BRAidEd FLExiBLE HoSE ASSEMBLy witH BRAckEt FoR inStitUtionAL APPLicAtionSRequest publication 10.88.
SyStEM witH inStitUtionAL BRAckEt And oPtionAL 5.5, 9.0 oR 13” REdUcERS
Size Reducer Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Inches Lbs. Part No. Quantity Each
31 x Z\x 5.5 3.35 A31HAQIB55 10 $73.00
9.0 3.75 A31HAQIB90 10 79.00
13.0 4.25 A31HAQIB13 10 85.50
48 x Z\x 5.5 3.85 A48HAQIB55 10 80.00
9.0 4.25 A48HAQIB90 10 86.00
13.0 4.75 A48HAQIB13 10 92.50
60 x Z\x 5.5 3.95 A60HAQIB55 10 88.00
9.0 4.35 A60HAQIB90 10 94.50
13.0 4.85 A60HAQIB13 10 101.00
72 x Z\x 5.5 4.05 A72HAQIB55 10 96.50
9.0 4.45 A72HAQIB90 10 102.50
13.0 4.95 A72HAQIB13 10 109.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
series aQc Braided flexible hose assembly, for clean room applications
series aQc
BRAidEd FLExiBLE HoSE ASSEMBLy FoR cLEAn RooM APPLicAtionS
(Series AQC is ordered using Order Form SF-34)Request publication 10.86.
Size Aprx. Wgt. Ea. Price
Inches Lbs. Each
24 x Z\x 1.4 +
48 x Z\x 1.8 +
72 x Z\x 2.2 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
www.victAULic.coM PL2011-A-FP54
AquaFlex Stainless Steel Sprinkler Fittings SE
cti
on
4
AQU
AFL
Ex
StA
inLE
SS
StE
EL S
PR
ink
LER
Fit
tin
GS
series aQd Braided flexible hose assembly, for industrial duct systems
series aQd
BRAidEd FLExiBLE HoSE ASSEMBLy FoR indUStRiAL dUct SyStEMSRequest publication 10.87.
Size Base Mount Radius Round Duct Dia. Aprx. Wgt. Ea. Victaulic Price
Inches Inches Lbs. Part No. Each
24 x Z\x 6.1 Round 12 – 14 2.23 A24HAQD96R $755.50
9.4 Round 16 – 24 2.23 A24HAQD99R 755.50
18.9 Round 26 – 72 2.23 A24HAQD91R 755.50
Square N/A 2.23 A24HAQD96S 755.50
48 x Z\x 6.1 Round 12 – 14 2.64 A48HAQD96R 829.50
9.4 Round 16 – 24 2.64 A48HAQD99R 829.50
18.9 Round 26 – 72 2.64 A48HAQD91R 829.50
Square N/A 2.64 A48HAQD96S 829.50
72 x Z\x 6.1 Round 12 – 14 3.05 A72HAQD96R 935.50
9.4 Round 16 – 24 3.05 A72HAQD99R 935.50
18.9 Round 26 – 72 3.05 A72HAQD91R 935.50
Square N/A 3.05 A72HAQD96S 935.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
series aQs sub-assemblies – hoses less Brackets
series aQs
SUB-ASSEMBLiES – HoSES LESS BRAckEtSRequest publication 10.85.
BRAidEd HoSE witH BRAncH LinE niPPLE And REdUcER – no BRAckEt
UnBRAidEd HoSE witH BRAncH LinE niPPLE And REdUcER – no BRAckEt
Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Lbs. Part No. Quantity Each
Unbraided Hose Only
31 x Z\x 1.90 A31HAQFBUE 10 $46.00
C\v 1.90 A31TAQFBUE 10 48.50
48 x Z\x 2.15 A48HAQFBUE 10 54.00
C\v 2.15 A48TAQFBUE 10 56.00
60 x Z\x 2.40 A60HAQFBUE 10 61.50
C\v 2.40 A60TAQFBUE 10 64.50
72 x Z\x 2.90 A72HAQFBUE 10 73.50
C\v 2.90 A72TAQFBUE 10 75.50Braided Hose Only
31 x Z\x 2.20 A31HAQFBBE 10 $57.50
C\v 2.20 A31TAQFBBE 10 61.50
48 x Z\x 2.70 A48HAQFBBE 10 76.00
C\v 2.70 A48TAQFBBE 10 76.00
60 x Z\x 2.90 A60HAQFBBE 10 84.50
C\v 2.90 A60TAQFBBE 10 84.50
72 x Z\x 3.00 A72HAQFBBE 10 88.50
C\v 3.00 A72TAQFBBE 10 88.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
55
AquaFlex Stainless Steel Sprinkler Fittings
www.victAULic.coM PL2011-A-FP
SEctio
n 4
AQ
UA
FLEx S
tAin
LES
S S
tEEL SPR
ink
LER Fittin
GS
series aQs system sub-assemblies and, individual components
series aQs
SyStEM SUB-ASSEMBLiES And individUAL coMPonEntS
Size Aprx. Wgt. Ea. Victaulic Box Price
Description Inches Lbs. Part No. Quantity Each
1-BEE2 Bracket Subassembly24 1.29 A000AQFBEE 10 $25.50
48 1.29 A000AQFB48 10 31.50
1-BEE2 Bracket Subassembly for Hat Furring Channel 24 1.53 A000AQFHCA 10 45.50
1-BEE2 Bar Stock25 0.50 A000AQFB25 10 7.00
50 1.00 A000AQFB50 10 8.00
1-BEE2 Middle Open-Gate Bracket – 0.18 A000AQFBSQ 10 7.00
1-BEE2 End Bracket – Concealed or Flush – 0.18 A000AQFEBT 10 7.50
Reducing Nipple – 5Z\x”/139 mm LengthZ\x 0.65 A000AQFRNH 10 14.00
C\v 0.65 A000AQFRNT 10 14.00
Reducing Nipple – 9” LengthZ\x 1.05 A090AQFRNH 10 19.00
C\v 1.05 A090AQFRNT 10 19.00
Reducing Nipple – 13” LengthZ\x 1.55 A130AQFRNH 10 25.50
C\v 1.55 A130AQFRNT 10 23.50
90° Reducing Elbow – 4”/101,6 mm LengthZ\x 0.70 A000AQFRE4 10 26.00
C\v 0.70 A000AQFRE6 10 26.00
90° Reducing Elbow – 6”/152,4 mm LengthZ\x 1.00 A000AQFRE5 10 26.00
C\v 1.00 A000AQFRE7 10 26.00
Institutional Bracket – .025 A000AQFINB 10 8.00
Branch Line Nipple – .025 A000AQFBLN 10 14.00
Bracket Wing Nut Bolt – 0.05 A000AQFWNB 500 2.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
www.victAULic.coM PL2011-A-FP56
AquaFlex Stainless Steel Sprinkler FittingsSE
cti
on
4
AQU
AFL
Ex
StA
inLE
SS
StE
EL S
PR
ink
LER
Fit
tin
GS
section 5 – pressfit® system products
Pressfit® System Products
57www.victAULic.coM PL2011-A-FP
system for carbon steel pipethe Victaulic® pressfit® system for carbon steel pipe offers economy, speed and reliabilty for joining small diameter pipe for fire protection, heating/air conditioning and many other services. pressfit products for carbon steel pipe are externally zinc elec-troplated. pressfit carbon steel is not intended for use in open loop water systems. request 12.02.
the system incorporates schedule 5 steel pipe from C\v - 2”/20 mm - 50 mm with a system of pressfit couplings, elbows, tees, reducers and adapters. the pressfit system for carbon steel is Boca approved, listed by sBcci pst and esi and is ul/ulc listed and fm approved for 175 psi/1200 kpa fire protection service. products are rated to 300 psi/2065 kpa for heating water and other general services.
pressfit for carbon steel pipegasket selection
gasket selection o-RinG SELEction MUSt ALwAyS BE SPEciFiEd on yoUR oRdER
GRADE TEMP. RANGE COMPOUNDCOLOR CODE * GENERAL SERVICE RECOMMENDATIONS
STANDARD O-RING
E –30°F to +230°F EPDM GreenStripe
Recommended for hot water service within the specified tem-perature range plus a variety of dilute acids, oil-free air and many chemical services. Not recommended for petroleum services. Not recommended for steam services.
AVAILABLE O-RING
T –20°F to +180°F Nitrile OrangeStripe
Recommended for petroleum products, air with oil vapors, veg-etable and mineral oils within the specified temperature range. Not recommended for hot water services over +150°F/+66°C steam, or for hot dry air over +140°F/+60°C.
* Pressfit stainless steel products must only be used on services compatible with o-ring and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.
wARninG•Before attempting to install any Pressfit system products, carefully read and
fully understand the “Pressfit Products installation instructions” (i-500) and the operating and maintenance manual supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.
style 500 loose o-rings
style 500
LooSE o-RinGS
G - _ _ _ -500-0 _ -0Request publication 12.02.
StyLE 500 - SPARE PARtS - LooSE o-RinGS
Nominal Size Inches
Grade “E” or “T” O-Rings
Price Each
C\v $5.50
1 6.00
1Z\x 9.00
2 12.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Contact Victaulic for delivery time.
+ Quoted on application. Contact Victaulic for pricing and availability.
www.victAULic.coM PL2011-A-FP58
Pressfit System For iPS Steel PipeSE
cti
on
5
PR
ES
SFit
SyS
tEM
Fo
R i
PS
StE
EL P
iPE
style 505 standard coupling
style 505
StAndARd coUPLinG
(P x P) F - _ _ _ -505-Z- _ -0Request publication 12.02.
StyLE 505 – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. Pieces
Aprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.16 $26.00
1 10 0.22 27.50
1Z\v 10 0.31 32.50
1Z\x 5 0.43 36.50
2 5 0.69 47.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
style 510 90° elbow
style 510
90° ELBow
(P x P) F - _ _ _ -510-Z- _ -0Request publication 12.02.
StyLE 510 – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. Pieces
Aprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.42 $36.50
1 10 0.61 42.00
1Z\v 5 1.06 50.50
1Z\x 2 1.38 68.50
2 2 2.30 90.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
style 509 90° elbow - short tangent
style 509
90° ELBow - SHoRt tAnGEnt
(P x P ) F - _ _ _ -509-Z- _ -PRequest publication 12.02.
StyLE 509 – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. Pieces
Aprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.32 $52.00
1 10 0.50 53.50
1Z\v 5 0.80 71.50
1Z\x 2 1.04 86.50
2 2 1.50 109.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
59
Pressfit System For iPS Steel Pipe
www.victAULic.coM PL2011-A-FP
SEctio
n 5
PR
ES
SFit SyStEM
FoR
iPS
StEEL PiP
E
style 506 slip coupling
style 506
SLiP coUPLinG
(P x P) F - _ _ _ -506-Z- _ -0Request publication 12.02.
StyLE 506 – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.23 $36.50
1 10 0.32 45.00
1Z\v 5 0.43 55.50
1Z\x 5 0.58 68.50
2 5 0.87 87.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
style 511 45° elbow
style 511
45° ELBow
(P x P) F - _ _ _ -511-Z- _ -0Request publication 12.02.
StyLE 511 – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.34 $37.00
1 10 0.53 40.00
1Z\v 5 0.88 47.50
1Z\x 2 1.27 64.50
2 2 1.97 84.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
style 580 male adapter – threaded
style 580
MALE AdAPtER – tHREAdEd
(P x M) F - _ _ _ -580-Z- _ -MRequest publication 12.02.
StyLE 580 MALE AdAPtER – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v x Z\x 10 0.30 $31.50
C\v 10 0.35 31.50
1 10 0.42 37.50
1 x C\v 10 0.42 40.00
1 10 0.51 42.00
1Z\v x 1Z\v 5 0.52 52.50
1Z\x x 1Z\x 5 0.81 67.00
2 x 2 5 1.17 83.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
www.victAULic.coM PL2011-A-FP60
Pressfit System For iPS Steel Pipe SE
cti
on
5
PR
ES
SFit
SyS
tEM
Fo
R i
PS
StE
EL P
iPE
style 580 female adapter – threaded
style 580
FEMALE AdAPtER – tHREAdEd
(P x F) F - _ _ _ -580-Z- _ -FRequest publication 12.02.
StyLE 580 FEMALE AdAPtER – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v x Z\x 20 0.19 $33.00
C\v 20 0.26 33.00
1 x Z\x 20 0.38 33.00
C\v 10 0.37 47.00
1 10 0.35 47.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
style 520 tee – female reducing Branch
style 520
tEE – FEMALE REdUcinG BRAncH
(P X P X F) F - _ _ _ -520-Z- _ -FRequest publication 12.02.
StyLE 520 – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v x Z\x 10 0.35 $53.50
1 x Z\x 10 0.41 58.00
C\v 10 0.55 54.50
1 10 0.58 61.00
1Z\v x Z\x 10 0.57 61.00
C\v 5 0.65 58.50
1 5 0.74 65.50
1Z\x x Z\x 5 0.77 65.00
C\v 5 0.85 65.00
1 5 0.91 75.50
2 x Z\x 5 1.14 82.00
C\v 5 1.22 74.00
1 5 1.28 86.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
style 550 reducer insert
style 550
REdUcER inSERt
(P x T) F - _ _ _ -550-Z- _ -TRequest publication 12.02.
StyLE 550 – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. PiecesAprx. Weight
Each UnitPrice Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
1 x C\v 10 0.21 $30.50
1Z\v x C\v 10 0.26 32.00
1 10 0.29 32.50
1Z\x x 1 5 0.35 33.00
1Z\v 5 0.41 34.00
2 x 1Z\v 5 0.53 38.00
1Z\x 5 0.59 40.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
61
Pressfit System For iPS Steel Pipe
www.victAULic.coM PL2011-A-FP
SEctio
n 5
PR
ES
SFit SyStEM
FoR
iPS
StEEL PiP
E
style 520 tee – reducing Branch
style 520
tEE – REdUcinG BRAncH
(P x P x P) F - _ _ _ -520-Z- _ -PRequest publication 12.02.
StyLE 520 – REdUcinG BRAncH witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
1 x C\v 10 0.41 $57.00
1Z\v x C\v 10 0.55 61.00
1 10 0.58 61.00
1Z\x x C\v 5 0.73 67.50
1 5 0.76 68.50
2 x C\v 5 1.10 75.50
1 5 1.13 86.00
1Z\x 5 1.16 106.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
style 520 straight tee
style 520
StRAiGHt tEE
(P x P x P) F - _ _ _ -520-Z- _ -PRequest publication 12.02.
StyLE 520 tEE – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.32 $55.50
1 10 0.44 59.50
1Z\v 5 0.62 71.50
1Z\x 5 0.86 81.50
2 2 1.37 101.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
style 520 end-of-line – threaded reducing Branch
style 520
End-oF-LinE tEE witH tHREAdEd REdUcinG BRAncH
(P x C x F) F - _ _ _ -520-Z- _ -CRequest publicaion 12.02.
StyLE 520 End-oF-LinE tEE witH tHREAdEd REdUcinG BRAncH – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size Center to EndAprx. Weight
Each Unit Price Each †
Inches Inches Lbs
W/Standard O-Ring
Grade “E” or “T”
1 x Z\x 2.90 0.49 $75.50
C\v 2.90 0.66 75.50
1 2.90 0.70 82.00
1Z\v x Z\x 3.30 0.68 82.00
C\v 3.30 0.78 79.00
1 3.30 0.89 86.50
1Z\x x Z\x 3.60 0.92 75.50
C\v 3.60 1.02 86.50
1 3.60 1.09 100.00
2 x Z\x 4.20 1.37 113.00
C\v 4.20 1.46 105.00
1 4.20 1.54 124.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
www.victAULic.coM PL2011-A-FP62
Pressfit System For iPS Steel PipeSE
cti
on
5
PR
ES
SFit
SyS
tEM
Fo
R i
PS
StE
EL P
iPE
style 520 end-of-line – pressfit reducing Branch
style 520
End-oF-LinE tEE witH PRESSFit REdUcinG BRAncH
(P x D x P) F - _ _ _ -520-Z- _ -DRequest publication 12.02.
StyLE 520 End-oF-LinE tEE witH PRESSFit REdUcinG BRAncH – witH StAndARd o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size Center to EndAprx. Weight
Each Unit Price Each †
Inches Inches Lbs
W/Standard O-Ring
Grade “E” or “T”
1 x C\v 2.90 0.49 $75.50
1 2.90 0.70 78.50
1Z\v x C\v 3.30 0.66 81.50
1 3.30 0.70 82.00
1Z\x x C\v 3.60 0.88 88.00
1 3.60 0.91 91.50
2 x C\v 4.20 1.32 113.00
1 4.20 1.36 140.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
style 522 Brass Body Ball Valve
series 522
PRESSFit SyStEM BRASS Body BALL vALvE
Carbon Steel Pressfit Ends (P x P) V - _ _ _ -522-Z- _ -MRequest publication 12.02.
SERiES 522 – PRESSFit EndS witH o-RinG GRAdE “E” oR “t” oR witH oPtionAL o-RinG GRAdE “o”
Nominal Size End to EndAprx.
Weight Each Price Each †
Inches Inches Lbs
Pressfit Ends (P x P)
With Grade “E” or “T” O-Ring
C\v 6.46 1.3 $209.00
1 7.56 2.0 253.00
1Z\v 8.28 2.8 332.00
1Z\x 8.97 3.7 448.00
2 10.69 4.7 514.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice of o-ring clearly on order.
63
Pressfit System For iPS Steel Pipe
www.victAULic.coM PL2011-A-FP
SEctio
n 5
PR
ES
SFit SyStEM
FoR
iPS
StEEL PiP
E
www.victAULic.coM PL2011-A-FP64
section 6 – pipe preparation tools
Pipe Preparation tools
LEASE PURcHASE AGREEMEnt
Some tools manufactured by Victaulic are available through a lease purchase agreement. Contact Victaulic for details.
65www.victAULic.coM PL2011-A-FP
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-easy® roll grooving tools – field portableVe12
Vic-easy® roll grooving tools – field portable
Ve12 VE12 is designed for manual grooving of C\v– 2” steel, stainless steel, aluminum and PVC pipe.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE12 R000012VE0 17/20 $650.00 $1399.00
vE12 RAtinGS – MAxiMUM cAPAcity †
Pipe Material Pipe Size/Schedule
VE12 C\v 1 1Z\v 1Z\x 2
Steel 5 – 10 5 – 40
Stainless 40S only
Aluminum * 5 – 10 5 – 40
PVC Plastic 40
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
Ve26 s/c
Ve26 VE26 is designed for manual grooving of 2 – 6” steel, stainless steel, aluminum, PVC, and copper tube.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE26S – Steel, Stainless Steel R100026VE0 22/25 $618.00 $1326.00
VE26C – Copper Tube R200026VE0 22/25 618.00 1326.00
VE26SS – Lightwall Stainless Steel R700026VE0 22/25 618.00 1326.00
VE26P – Aluminum and PVC Pipe R750026VE0 22/25 618.00 1326.00
vE26 RAtinGS – MAxiMUM cAPAcity †
Pipe Material Pipe Size/Schedule
VE26 2 2Z\x 3 3Z\x 4 5 6
VE26S – Steel 5 – 40 5 – 10
VE26S – Stainless 40S Only
VE26C – Copper K, L, M and DWV
VE26P – Aluminum * 5 – 40 5 – 10
VE26P – PVC Plastic 40
VE26SS – Lt. Wall SS 5S – 10S
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
Ve26/Ve46 power drive kit
Ve26/Ve46 power drive kit
Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the new and improved VE26/VE46 to alternately groove pipe using stationary power drive.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE26/VE46 Power Drive Kit R075-026-KIT 7/9 N/A $244.50
www.victAULic.coM PL2011-A-FP66
Pipe Preparation toolsSE
cti
on
6
PiPE
PR
EPA
RAt
ion
to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Ve46
Ve46 VE46 is designed for manual grooving of 3Z\x– 6” steel, stainless steel, aluminum and PVC.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE46 – Steel R000046VE0 28/31 $680.00 $1603.50
VE46P – Aluminum and PVC Plastic R200046VE0 28/31 680.00 1603.50
vE46 RAtinGS – MAxiMUM cAPAcity †
Pipe Material Pipe Size/Schedule
VE46 3Z\x 4 4Z\x 5 6
VE46S – Steel 5 – 40
VE46S – Stainless 40S Only
VE46P – Aluminum * 5 – 40
VE46P – PVC Plastic 40 40 – 80
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
Ve226 B/s/m/c/Bss/mss/p
Ve226 B/s/m/c/Bss/mss/p †
VE226 is designed for use with a standard C\,” square drive for roll feed with operator supplied ratchet wrench to roll groove C\v– 6” steel, stainless steel, aluminum, PVC and copper tube. Included are feeler gauges and allen wrench for depth stop setting. Built-on mount fits Victaulic VPD752 and Ridgid 300® power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822).
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per Month Tool
List Price ^
VE226B – C\v– 1Z\x”/26 – 48 mm R2022260FS 27/42 $674.00 $1484.50
VE226S – 1Z\v– 6”/42 – 168 mm R2002260FS 27/42 674.00 1484.50
VE226M – 2 – 6”/60 – 168 mm R3002260FS 27/42 674.00 1484.50
VE226C – 2 – 6”/60 – 168 mm R1002260FS 27/42 674.00 1484.50
VE226BSS – C\v– 1Z\x”/26 – 48 mm R00X2260FS 27/42 674.00 1484.50
VE226MSS – 2 – 6”/60 – 168 mm RXM02260FS 27/42 674.00 1484.50
VE226P – 2 – 6” Aluminum and PVC Plastic R6002260FS 27/42 674.00 1484.50
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
vE226 RAtinGS – MAxiMUM cAPAcity †
Pipe Material Pipe Size/Schedule
VE226 C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 4Z\x 5 6
VE226S – Steel 5 – 40 5 – 10
VE226S – Stainless 40S Only
VE226B – Steel 5 – 40
VE226B – Stainless 40S Only
VE226B – Aluminum * 5 – 40
VE226B – PVC Plastic 40 40 – 80
VE226M – Steel 5 – 40 5 – 10
VE226M – Stainless 40S Only
VE226C – Copper K, L, M and DWV
VE226BSS – Lt. Wall SS 5S – 10S
VE226MSS – Lt. Wall SS 5S – 10S
VE226P – Aluminum * 5 – 40 5 – 10
VE226P – PVC Plastic 40 – 80 40
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
* 6061-T4 or 6063-T4 Alloy must be used.
67
Pipe Preparation tools
www.victAULic.coM PL2011-A-FP
SEctio
n 6
PiP
E P
REPA
RAtio
n to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Ve226 power drive kit
Ve226 power drive kit Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive. * Ridgid is a registered trademark of the Ridge Tool Company.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE226 Power Drive Kit † R700-226-KIT 75/115 N/A $2415.50
† Drive unit not included.
www.victAULic.coM PL2011-A-FP68
Pipe Preparation toolsSE
cti
on
6
PiPE
PR
EPA
RAt
ion
to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-easy roll grooving tools – field fabricationVe106
Vic-easy roll grooving tools – field fabrication
Ve106 groove-n-go VE106 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v– 6”/32 – 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with 1Z\v– 3”/25 – 80 mm carbon steel roll sets; 4 – 6”/100 – 150 mm carbon steel rolls are installed.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE106 Groove-N-Go R000106110 140/200 N/A $4680.00
vE106 RAtinGS – MAxiMUM cAPAcity †
Pipe Material Pipe Size/Schedule
VE106 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6
Steel 5 – 40 Std. Rolls
Stainless 40S Std. Rolls
Lt. Wall SS 5S – 10S RX Rolls*
Copper K, L, M and DWV Copper Rolls
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
* RX Rolls – “RX” is the Victaulic part code designator for grooving roll sets specifically designed for roll grooving lightwall stainless steel pipe.
vE106 GRoovinG RoLLS *
Pipe Material Part NumberPipe Size
Range
Purchase List Price
Each Set †
Standard
R912106UA6 1Z\v– 6” Upper $148.00
R912106L03 1Z\v– 3” Lower 416.50
R904106L06 4 – 6” Lower 416.50
Copper RR02106006 2 – 6” 583.00
Stainless RX RX12106L06 1Z\v– 6” Lower 460.50
EndSealRZ02106003 1Z\v– 3” Set 610.00
RZ04106006 4 – 6” Set 610.00
Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details.§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.
69
Pipe Preparation tools
www.victAULic.coM PL2011-A-FP
SEctio
n 6
PiP
E P
REPA
RAtio
n to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Ve272sfs
Ve272sfs The VE272SFS portable roll groover mounts easily to the Victaulic VPD752 or Ridgid 300® Power Drive. The VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick and easy. The VE272SFS is also equipped with Victaulic Company’s patented, Enhanced-Tracking grooving rolls. The tool is supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed.
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Requires a VPD752 or Ridgid 300 power drive.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE272SFS R000272SFS 184/250 $1062.00 $5648.50^
Optional Stabilizer (8 – 12” only) R4002720FS – 108.50 1533.00
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
vE272SFS RAtinGS – MAxiMUM cAPAcity †
Pipe Material Pipe Size/Schedule
VE272SFS C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12
Steel 5 – 40 Std. Rolls 5 – 20Std. Rolls
Stainless 40S Std. Rolls
Lt. Wall SS 5S – 10S RX Rolls
Aluminum *‡
5 – 40 RP Rolls5 – 20
RP Rolls
PVC Plastic ‡ 40 ‡§ 40 –80 RP Rolls 40 ‡
Copper K, L, M and DWV Copper Rolls
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
‡ Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RP02272L02
vE272SFS GRoovinG RoLLS *
Pipe Material
Part Number
Pipe Size Range
Purchase List Price
Each Set †
Standard
R900268001 C\v” $2169.50
R900268002 1 – 1Z\x” 1869.00
R902272003 2 – 3Z\x” 1050.00
R904272006 4 – 6” 1121.50
R908272012 8 – 12” 1250.50
CopperRR02272006 2 – 6” 1301.00
RR08272008 8” 1827.50
Stainless RX
RX02272003 2 – 3Z\x” 1463.50
RX04272006 4 – 6” 1570.00
RX08272012 8 – 12” 1573.00
Endseal
RZ02272003 2 – 3Z\x” 1708.50
RZ04272006 4 – 6” 1747.00
RZ08272012 8 – 12” 1818.00
PVC/Aluminum
RP02272003 2 – 3Z\x” 1128.50
Contact Victaulic4 – 6” +
8” +
Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details.§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.
+ Quoted on application. Contact Victaulic for pricing and availability.
www.victAULic.coM PL2011-A-FP70
Pipe Preparation toolsSE
cti
on
6
PiPE
PR
EPA
RAt
ion
to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-easy roll grooving tools – shop fabricationVe268
Vic-easy roll grooving tools – shop fabricationNOTE: All shop models shipped set for 220 power, unless specified otherwise.
Ve268 † Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is equipped with a pipe stabilizer for 8 – 12” nominal pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (2 – 12” pipe) * (8 – 12” rolls are installed, unless otherwise specified).
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Request RP-268 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require differ-ent incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may be required.)
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price
VE268 R000268VE0 735/766 $2541.00 $22944.00^
^ For proper operation, a pipe stand is required. See Accessories for details.
vE268 RAtinGS – MAxiMUM cAPAcity †
Pipe Material Pipe Size/Schedule
VE268 C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12
Steel 5 – 40 Std. Rolls 5 – 20Std. Rolls
Stainless 40S Std. Rolls
Lt. Wall SS 5S – 10S RX Rolls
Aluminum *‡
5 – 40 RP Rolls5 – 20
RP Rolls
PVC Plastic ‡ 40 ‡§ 40 – 80 RP Rolls 40 ‡
Copper K, L, M and DWV Copper Rolls
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
‡ Use RP Rolls.* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RP02272L02
71
Pipe Preparation tools
www.victAULic.coM PL2011-A-FP
SEctio
n 6
PiP
E P
REPA
RAtio
n to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
vE268 GRoovinG RoLLS *
Pipe Material
Part Number
Pipe Size Range
Purchase List Price
Each Set †
Standard
R900268001 C\v” $2169.50
R900268002 1 – 1Z\x” 1869.00
R902272003 2 – 3Z\x” 1050.00
R904272006 4 – 6” 1121.50
R908272012 8 – 12” 1250.50
CopperRR02272006 2 – 6” 1301.00
RR08272008 8” 1827.50
Endseal
RZ02272003 2 – 3Z\x” 1708.50
RZ04272006 4 – 6” 1747.00
RZ08272012 8 – 12” 1818.00
Stainless RX
RX02272003 2 – 3Z\x” 1463.50
RX04272006 4 – 6” 1570.00
RX08272012 8 – 12” 1573.00
PVC/Aluminum
RP02272003 2 – 3Z\x” 1128.50
Contact Victaulic4 – 6” +
8” +
Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details.NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.
+ Quoted on application. Contact Victaulic for pricing and availability.
www.victAULic.coM PL2011-A-FP72
Pipe Preparation toolsSE
cti
on
6
PiPE
PR
EPA
RAt
ion
to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-easy tool accessoriesVpd752 Victaulic power drive
Vic-easy tool accessories
Victaulic power drive – Vpd752
Power drive features safety foot switch and bi-directional speed chuck. Z\x horsepower, 15 amp motor operates on standard 120V power source.
VPD753 for single phase, 220V power source also available. Contact Victaulic for pricing.
Capacities: See appropriate tool. †
Optional: Universal Drive Shaft.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price
Victaulic Power Drive - VPD752 R000752110 140/165 $850.00 $6053.50
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
Vaps112 pipe stand
Vaps112 Vic-Easy Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design allows for rotational and forward/traverse movement. They are designed for direct use with Vic-Easy roll grooving tools: VE272SFS, VE268, VE270FSD.
Capacities: 1 – 12” IPS pipe †
Load Rating: 1075 lbs
Vertical Stroke: 14Z\x” for adjusting rod; 8Z\x” leg adjustment; 23” total
Min. Pipe Height from Floor: 23” on 12” pipe; 21” on 1” pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price
VAPS 112 R000112PS0 190/220 $636.00 $4587.00
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
73
Pipe Preparation tools
www.victAULic.coM PL2011-A-FP
SEctio
n 6
PiP
E P
REPA
RAtio
n to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
hole cutting toolsVhct900
hole cutting tools
Vhct900 Includes three-piece hole cutting tool (Base, drill motor and feed assembly), arbor assembly, coupon remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded 120/1/60 – 10 amp electrical supply. (220/1/60 – 10 amp no cost option)
Capacities: 1 – 3Z\x” holes for Z\x– 3” Mechanical-T, Vic-Let connections.
Tool Model Part Number
Tool Weight/ Shipping Weight/
LbsRental
Per MonthTool
List Price
VHCT900 R000900HCT 36/61 $1379.00 $4226.50
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
hct908
hct908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x” carbon and stainless steel pipe. This allows for use of Mechanical-T®, Vic-Let®, Vic-O-Well and Style 922 Outlet Tee. The speed is variable and requires 110 volt power supply to operate.
Capacities: 1 – 4Z\x” holes for Z\x– 4” Mechanical-T, Vic-Let connections.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price
HCT908 R000908HCT 35/48 $570.00 $2579.00
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
pressfit toolspft505
pressfit® tools
pft505 The Pressfit Tool is supplied in a carrying case with a Pressfit System Product Assembly and Tool Operation Manual.
The Pressfit Tool is electrically powered and hydraulically driven and requires a 110v/60 cycle/6.5 amp – AC current supply.
NOTE: Jaws available only for rent with the rental of a Pressfit Tool.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs List Price
PFT505 Pressfit Tool – Tool Only R000505PFT 43 +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
pft505 Jaws
pft505 Jaws only Individual Pressfit jaws are available for rental or purchase. Specify size required on order.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsJaw Size
Inches List Price
Pressfit Jaws Only
R3DC500050
15
Z\x +
R3DC500075 C\v +
R3DC500100 1 +
R3DC500125 1Z\v +
R3DC500150 1Z\x +
R3DC500200 2 ‡ +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
www.victAULic.coM PL2011-A-FP74
Pipe Preparation toolsSE
cti
on
6
PiPE
PR
EPA
RAt
ion
to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
pft509
pft509 pressfit tool The Pressfit Tool is supplied in a carrying case with a Pressfit System Product Assembly and Tool Operation Manual.
The Pressfit Tool is battery powered and hydraulically driven.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs Tool List Price
Radial Press, Charger, 4 Jaws, 2 Batteries, Steel Carrying Case R000509PFT 46 +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
pft509 Jaws
pft509 Jaws only Individual Pressfit jaws are available for rental or purchase. Specify size required on order.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsJaw Size
Inches List Price
Pressfit Jaws Only
RJAW509050
15
Z\x +
RJAW509075 C\v +
RJAW509100 1 +
RJAW509150 1Z\x +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
pressfit accessories
pressfit accessories Tool Model Part Number List Price
Battery Charger NE90000510 +
Individual Batteries NE90000509 +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
pressfit insertion gauges
pressfit insertion gauges
Request Part No. R000500SET for Pressfit Gauges. Contact Victaulic for pricing.
75
Pipe Preparation tools
www.victAULic.coM PL2011-A-FP
SEctio
n 6
PiP
E P
REPA
RAtio
n to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
wARninG•Always read and understand all operating and maintenance instructions before
attempting to use any victaulic pipe preparation tools.
•Any victaulic pipe preparation tools must be used by trained operators onLy. operators that use victaulic Pipe cut-off tools must be knowledgeable in sound welding and safety procedures.
Misuse of any equipment and lack of adherance to proper safety procedures may result in serious personal injury, property damage, and/or product damage.
* Pressfit stainless steel products must only be used on services compatible with o-ring and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.
how to order
how to order When ordering tools or tool parts, please include the following information:A. PARTS ORDERS1. Tool Model Number. Example: VE436MC. 2. Tool Serial Number. The serial number can be found on the tool name plate. Example: 0436 xxxx. 3. Part Number and Description. Example: Part #105, Upper Shaft. 4. Where to send the part(s). Company Name, Address and Telephone Number5. Attention: Person’s Name6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. B. TOOL ORDERS1. Tool Model Number. Example: VE416FSD. 2. Tool Description. Example: Vic-Easy VE416FSD Roll Grooving Tool. 3. Where to send the tool. Company Name, Address and Telephone Number4. Attention: Person’s Name5.Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. C. TOOL RENTAL ORDER1. A completed and signed tool rental agreement. 2. Purchase Order Number. 3. Tool Model Number. Example: VE272SFS4. Tool Description. Example: Vic-Easy VE272SFS Roll Grooving Tool. 5. Where to send the tool. Company Name, Address and Telephone6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. NOTES: Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving. PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116. Copper/nickel pipe - contact Victaulic for details. Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets. Note: Vic-Easy tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove Dimension charts and to ANSI/AWWA C-606 standards. SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done. Optional rolls are available at an additional cost.
www.victAULic.coM PL2011-A-FP76
Pipe Preparation toolsSE
cti
on
6
PiPE
PR
EPA
RAt
ion
to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
terms and conditions of tool rental
terms and conditions of tool rental1. Lessor rents to Lessee and Lessee leases from Lessor the tool(s) and accessories listed on the reverse side hereof, which are designed for use in the preparation
of pipe to receive Victaulic products, hereinafter called the leased property; for the term specified, commencing when the leased property is delivered to carrier for delivery to Lessee.
2. Rental Rate. Lessee agrees to pay rent at the rates specified on this agreement. The rental shall be due and payable at the end of each month during the term of the lease. Terms of payment: net 30 days from date of invoice. If lease is terminated any time during the initial month, the rental shall be payable at the then current published monthly rental rate. If lease is terminated any time during a subsequent month, the rental will be prorated. (This agreement is valid for one (1) year, at the time of signing. It will be automatically renewed with price in effect at the time of renewal until the signee terminates the agreement.)
3. On-Account Payment. Lessee, on executing the agreement, has made an on-account payment to Lessor which shall be returned to Lessee upon termina-tion of the lease, or applied to any open invoices on the Lessee’s account, provided Lessee is not in default under any of the term of the lease and has returned leased property in good condition, less ordinary wear and tear.
4. Freight. Outbound: F.O.B. Shipping Point (Our Option) – Freight Collect. Return: Lessee shall pay all shipping charges for return of the leased property.
5. Use. All leased property is for the exclusive use of Lessee only, and may not be assigned, transferred, sublet or loaned to or used by any other party, without prior written consent of the Lessor.
6. Ownership. The property leased is and shall at all times remain the sole property of the Lessor, and Lessee shall have no right, title or interest therein except as expressly set forth in this Lease.
7. Taxes. Lessee shall pay all taxes, assessments, license and registration fees levied on the leased property while in the Lessee’s possession and Lessee shall keep the leased property free and clear of all liens and encumbrances. Lessee shall pay all sales taxes invoiced by Victaulic Company unless the lessee provides the lessor with a valid sales tax exemption certificate for the state where the tool is delivered.
8. Access. Lessor shall at all times have free access to the leased property and to the premises on which located, for the purpose of examining the leased property.
9. Return of Property. Lessee shall return all leased property, properly crated, freight prepaid, and insured for its market value to Lessor at one of the locations indicated on the back cover. If Lessee fails to return the leased property upon termination, Lessee shall pay rent at the then current monthly rental rate until returned, and Lessor shall also have the right to remove the leased property from Lessee’s premises, without recourse to any legal proceedings.
10. Repairs and Servicing. If leased property, excluding Tool Bits, becomes worn or unserviceable from normal recommended use, Lessor will supply replacement tools and/or parts, without cost, upon return of the leased property to Lessor.
11. Damage or Loss. If leased property is damaged by reason of other than normal recommended use, Lessee shall indemnify Lessor for the cost of repairs. If leased property is not returned to Lessor in accordance with the terms of this Agreement for any cause or reason whatsoever, including, without limiting the generality of the foregoing, loss, theft, damage, accident, neglect, abuse or destruction, by fire or otherwise, whether due to Lessee’s fault or not, Lessee shall pay to Lessor as liquidated damages an amount to be determined by Lessor not to exceed the list price of all leased property, as published in the most current Victaulic price list for Pipe Preparation tools.
12. Indemnity. Lessee assumes full responsibility for the operation of the leased property and shall indemnify, protect, save and keep harmless the Lessor, its agents and servants from and against all losses, damages, penalties, claims, actions, suits, costs, expenses and disbursements, including legal expenses of what-soever kind in nature imposed upon, incurred by, or asserted against the Lessor in any way relating to or arising out of this Lease or of the Lessee’s delivery, pos-session, use, operation or return of the leased property. The indemnities contained in this paragraph shall continue in full force and effect, notwithstanding the termination of this Lease.
13. Lessor’s remedies on default. If the Lessee, with regard to any item or items of property, fails to pay any rent or other amount herein provided when the same shall become due and payable, or if the Lessee, with regard to any item or items of leased property, fails to observe, keep or perform any other provisions of this lease required to be observed, kept, or performed by the Lessee, or if any execution or other writ or process shall be issued in any action or proceeding against the Lessee, whereby the said leased property may be taken, the Lessor shall have the right to exercise any one or more of the following remedies: (a) To declare the entire amount of rent hereunder immediately due and payable as to any or all items of leased property, without notice or demand to the Lessee. (b) To sue for and recover all rents, and other payments, then accrued or thereafter accruing, with respect to any or all items of leased property. (c) To take possession of any or all items of leased property without demand or notice, wherever the same shall be located, without any court order or other pro-cess of law. The Lessee hereby waives any and all damage occasioned by such taking of possession. Any said taking of possession shall not constitute a termina-tion of this lease as to any or all items of leased property unless the Lessor expressly so notifies the Lessee in writing. (d) To terminate this lease as to any or all items of leased property. (e) To pursue any other remedy at law or in equity. Notwithstanding any such repossession or any other action, which the Lessor may take, the Lessee shall be and remain liable for the full performance of all obli-gations on its part to be performed under this lease; provided however, that if the Lessor is able to obtain any monies for said leased property from re-rental or sale thereof, which the Lessor specifically is not in any manner obligated to do, said monies, less expenses, shall be credited to the last payments of the Lessee’s obligation. Waiver of any default herein is not a waiver of any subsequent default. All such remedies are cumulative and may be exercised concurrently or sepa-rately.
14. Bankruptcy. Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as amended, is commenced by or against the Lessee, or if the Lessee is adjudged insolvent, or if the Lessee makes any assignment for the benefit of his creditors, or if a writ of attachment or execution is levied on any item or items of leased property and is not released or satisfied within 10 days thereafter, or if a receiver is appointed in any proceeding or action, to which the Lessee is a party, with authority to take possession or control of any item or items of the leased property, the Lessor shall have any may exercise any one or more of the remedies set forth in Paragraph 13 hereof; and this lease shall, at the option of the Lessor, without notice immediately terminate and shall not be treated as an asset of the Lessee after the exercise of said option.
15. Concurrent Remedies: The rights and remedies provided in this lease for the benefit of the Lessor shall be cumulative and shall not be exclusive but in addi-tion to any other remedies to which the Lessor may be entitled. the Lessee waives trial by jury in any action or proceeding arising hereunder.
16. Lessor’s expenses: The Lessee shall pay the Lessor all costs and expenses, including attorney’s fees, incurred by the Lessor in exercising any of its rights or rem-edies hereunder or enforcing any of the terms, conditions, or provisions hereof.
17. Binding Effect of Lease. This lease agreement shall inure to the benefit of and be binding upon the parties hereto and their respective heirs, executors, administrators, personal or legal representatives, successors and assigns.
18. Applicable Law and Severability. This lease shall be governed by and construed under the laws of the State of Pennsylvania. If any provision herein is invalid, it shall be considered deleted from this lease, and shall not invalidate the remaining provisions of this lease.
77
Pipe Preparation tools
www.victAULic.coM PL2011-A-FP
SEctio
n 6
PiP
E P
REPA
RAtio
n to
oLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
terms and conditions of tool sale
terms and conditions of tool saleControlling Provisions: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waive is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
Minimum Order: $100.00 net for any single order.
Terms of Payment: As stated on invoice. Maximum permissible interest rate thereafter.
Shipping Terms: F.O.B. shipping point (our option), freight prepaid and allowed on single orders having a net price value of $7,500 and over, for shipment at one time to one destination within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
The most economical routing to recognized delivery points will be used, at our discretion. If special routing is desired, orders should so state. Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Shipping dates are estimated as closely as possible. We use our best efforts to ship within the time estimated, but cannot guarantee to do so. In the event production or shipment is delayed, we reserve the privilege of changing shipping estimate. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be countermanded without our written consent. No material will be taken back without our written consent. Orders for non-standard material may not be cancelled nor will we accept return of such material for credit.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
Weights: All weights are approximate shipping weights and subject to change without notice.
Victaulic Company maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment without notice and without incurring obligation.
Warrantystandard product warranty applies. see inside Back cover. notE: Reconditioned tools shall be warranted 30 days from date of purchase.
www.victAULic.coM PL2011-A-FP78
Pipe Preparation toolsSE
cti
on
6
PiPE
PR
EPA
RAt
ion
to
oLS
terms and conditions of sale
terms and conditions of SaleCONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
TERMS OF PAYMENT: As stated on inovice. Maximum legal interest rate charged thereafter.
MINIMUM INVOICE CHARGES: $100 net for any single order.
SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders having a net price value of $7500 and over, for shipment at one time to one destination into distributor stock, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipping and handling charges on orders less than net price value of $7500, F.O.B. shipping point (our option) will be paid by the customer. The most economical routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or handling that has been requested by the customer, and is a deviation to our normal handling methods, will be added to the order and paid by the customer.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Victaulic will endeavor to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent.
Orders for non-standard (i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the right to change the designation of products from standard to non-standard and vice versa. This may be done at any time without notice, and without incurring obligation. For further information contact Victaulic.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
WEIGHTS: All weights are approximate shipping weights and subject to change without notice.
Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment without notice and without incurring obligation.
Warranty, Victaulic u.s., central and south america sales and service centers
WarrantyWe warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been defective.
THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.
This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Victaulic’s factory or which has been used in a manner contrary to Victaulic’s instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.
EFFECTIVE AUGUST 4, 2008
Fire ProtectionPrice List
2011-AFP
EFFEctivE SEPtEMBER 12, 2011
VICTAULIC
WORLD HEADQUARTERS
P.O. Box 31Easton, PA 18044-0031 USA
4901 Kesslersville RoadEaston, PA 18040 USA
1-800-PICK-VIC(1-800-742-5842)1-610-559-33001-610-250-8817 (fax)pickvic@victaulic.com
www.victaulic.com
UNITED STATES
P.O. Box 31Easton, PA 18044-0031
1-610-559-33001-610-250-8817 (fax)pickvic@victaulic.com
CENTRAL AND SOUTH AMERICA
P.O. Box 31Easton, PA 18044-0031 USA
4901 Kesslersville RoadEaston, PA 18040 USA
1-610-559-33001-610-559-3608 (fax)vical@victaulic.com
4901 Kesslersville RoadEaston, PA 18040 USA
UPdAtEd 9/2011 PL2011-A-FP 0560 REv vVictaulic is a registered trademark of Victaulic company. © 2011 Victaulic company. all rights reserVed.
www.victaulic.comthe Victaulic website is an information resource that can help you with your piping projects. among the many resources available at the site:
• fully searchable product and project databases • free product submittals • free product literature • piping software demos and modules • information on new product innovations • support services, and more...
Piping. Systems. Solutions.
2011-A FPFire Protection Price List