Post on 06-Mar-2016
description
Precision Bearing Specialists
Authorised Distributors for:
Established in 1992, taking a key rolein the distribution of High Precision Bearings.
With our specialised knowledge and many years of experiencewe have always recognised the need to fully satisfy our
customer requirements and offer the very highest standard of service.By setting ourselves these standards, it will be our ongoing goal to ensure
our customer expectations are not only met but also exceeded.Realising service efficiency is imperative, our vast comprehensive range of
stocks are monitored daily to ensure high levels are always available.As Trade Suppliers only, our reputation for loyalty to our customers
is second to none and we are proud to be recognised as one of the UK’sleading Trade only suppliers in our specialised products.
Committed to continuous growth and customer satisfaction,we can together build a successful future.
ISO 9002 REGISTEREDFULL MANUFACTURERS GUARANTEE
FULL TECHNICAL SUPPORTLATEST PRODUCT INFORMATION
COMPREHENSIVE STOCKS HELD
FEMCO The Company
Being AuthorisedDistributors for:
Schaeffler (UK) Limited,The Barden Corporation
(UK) Limited, SKF Limitedand IBC Walzlager Gmbh,
we guarantee highlycompetitive prices are
passed on to ourcustomers.
We hold extensive stocksthroughout our productrange, allowing us to
service customer demandsand requirements quickly
and efficiently.Continuous investment
programs will ensure thatstock levels are kept high
and increased to meetfuture demands.
Services Available:
24 Hour call out service.Same day despatch.Fast delivery service.
Interchange InformationSystem.
It was our founded aim toprovide customers with the
technical support andadvice required in the
Precision Bearingindustry and give help and
understanding in theproducts and applications.
We can be boastful thatour aim has been
accomplished and ourpresence in the market
has enhanced theunderstanding of the
Precision Bearing ranges.
We welcome ourcustomers to rely on our
expertise.
The most important aspectof FEMCO is our people.Working together as ateam, creating the imageonly associated with thefinest organisations.To maintain our finestandards all FEMCO staffare fully trained incustomer relations andproduct knowledge.This ongoing investmentis highly beneficial to allof our customers.The customer is ourpriority.
We pride ourselvesin a friendly andco-operative approachgiving customers theconfidence andsatisfaction they require.With our extensiveknowledge and experiencewe will ensure a quality,unsurpassed service everytime with full technicalsupport where required.
Our Company Our Service Our People
Certificate Number FS45587
FEMCO Limited
Femcooffers the
ultimatefull range
of superprecisionmachine
toolbearings
Authorised Distributors for:
Our Products
Angular contact super precision spindle bearings.Manufactured to P4S precision equal to P2 running accuracy
and envelope dimensions to P4.15 or 25 degree contact angles.
Universally ground for interchangeable mounting arrangements.A comprehensive range is also available in high speed,open or sealed, steel or ceramic ball hybrid versions.
Direct lube angular contact machine tool spindle bearings.Designed for max speed where radial oil lubrication
systems are featured.As a rule the use of DL (Direct Lube) spindle bearings results in areduction in running costs and proves more reliable than systems
using axial oil supply.
Sealed angular contactspindle bearings,greased for life.
Fully interchangeablewith the unsealed B Series.
Cost effective sincepre-greased means time
saved in preparation.Excellent in verticalmounted spindles.
Reduces running in timeby up to 50%.
Can be used to replace oillubrication systems in
most applications.
Cronidor 30.A new material created
by FAG / Bardenfor super precision
spindle bearings.Excels in both
extreme high and lowtemperatures.
In excess of 5 times the lifeof standard machine tool
bearings.Increased speed capacity
Double directionalangular contact
thrust ball bearings.60 degree contact angle.
Axially preloaded -suitable for heavy axial
load applications.Solid one piece brass
cage, ball guided.For higher speeds
available with ceramicrolling elements.
Miniture and instrumentball bearings.Full range available inmetric and inch series.Manufactured toABEC 7 precision.
Metric ballscrew support bearings.Series available 7602,7603, and the narrowerBSB Series.Manufactured toP4 precision.
Single and double rowcylindrical
roller bearings.Solid brass cage.
Available as SP and UPprecision specifications.
A wide range of lubricantsare also available.
See website for list of products available
FEMCO LimitedAuthorised
Distributor for
Our Products
A comprehensive range isavailable as high-speed ,
steel and ceramic balls (hybrid),open and sealed versions.
Angular Contact Ball Bearings.Manufactured to P4 precision,available in 15 & 25 degree contact angles. Universally ground for full
interchangeable arrangements or as dedicated matched bearing sets.Series available : 7000, 71800, 71900, 7200
BTM Series are manufactured ina back to back arrangementwith 30 or 40 degree contactangles.With a 25% lower bearingheight than the corresponding2344 series they are particularlysuitable for compact designs.With lower axial stiffness andload carrying capacity but muchhigher speed capabilities.This range is also available withceramic balls for ultra-highspeed applications .
Metric Ball Screw SupportBearings.
Manufactured to P4 precisionclass and suitable for all screwdrive and screw drive support
applications.
Available as single direction.Universally matchable design as
standard in numerous sizes.
High axial stiffness and loadcarrying capacity with lowfrictional moment providesexcellent solutions in high
speed and high accelerationapplications.
Hybrid – Ceramic BallAngular Contact Ball
Bearings.Designed for high-speed, high
rigidity applications.As ceramic balls are
considerably lighter and harderthan steel balls, they can run at
higher speeds and lowertemperatures.
Lower temperature runningleads to less heat generation,
less energy and longerlubricant life.
Sealed Angular ContactBall BearingsFilled with high speed greaseand fitted with non-contactseals these bearings offeroptimum performance in
challenging applications.Eliminating contamination andcost effective due topre-greasing, leading to timesaved in preparation.
Cylindrical Roller Bearings.Single and double row
cylindrical roller bearings in 3designs.
N 10 series, single row NN 30 series double row
NNU 49 series double rowManufactured to SP and UP
precision class, with brass,polyamide and PEEK cages.
This range of bearings isparticularly suitable for highload, high rigidity and high
speed applications.For efficient lubrication these
bearings are available with anannular groove and lubricationholes in the outer ring denoted
by (W33) suffix.Ceramic rollers are available onsome sizes for ultra-high speed
applications.
Double Direction Angular ContactThrust Ball Bearings.
Designed to axially locate spindles in bothdirections and typical used in conjunction with
cylindrical roller bearings (N and NN series).Manufactured in 2 designs:
Basic 2344 series and High Speed BTM seriesManufactured to SP, UP and P4C precision class with brass and polyamide cages.
Also with annular groove and oil lubrication holes (W33).2344 series available with 60 degree contact angle and large number of balls provides high axial stiffness
suitable for reasonably high speed applications.
See website for list of products available
FEMCO LimitedAuthorised
Distributor for:
Our Products
Thrust ball bearingsThree and five part thrust
ball bearings available.Manufactured toprecision grades
P6 and P5.
Single and double row cylindrical roller bearingsSingle row series.
Brass and nylon polyamide cages available.Manufactured to P6 and P5 precision.
Radial internal clearance options - C1, C2 and C3.Double row series.
Manufactured with a solid brass cage and to SP precisionspecification.
Double row angularcontact ball bearings
25˚ and 40˚contact angles.
Manufactured to P6 and P5precision.
Suitable for carrying axial loadsin either direction.
40˚ Angular contact ball bearingsManufactured to P6 and P5 precision, universally ground with axial
clearances of UA, UO and UL.7200 and 7300 series
available, produced with glass fibre reinforced polyamide cages.
Super precision bearing units for ballscrewsIBC manufacture a full range of cartridge bearing units and pillow block bearing units.
BSBU and BSPB series designed as fixed units for preloading.BLBU and BLPB series designed as floating end units to support the ballscrew.
BNBU series for mounting on the rotating ballscrew nut.IBC also manufacture a full range of super precision locknuts MMA, MMR, MMRB, MMRBS
and labyrinth MMRS series.
Single row deep grooveball bearingsComplete series available.Manufactured to P6, P5and P4 precision, withoptions of normal radialinternal clearance and also C2,C3 and C4.This range is availablewith steel, fibre and in somecases brass cages.Designed as open type or withseals and shieldsat one or both sides.
See website for list of products available
Head Office:Beech House
Kingswood Business ParkHolyhead Road
AlbrightonWolverhampton
WV7 3AUTel: 01902 375 888Fax: 01902 375 800
Email: femco@btconnect.comwww.femcoprecisionbearings.co.uk