EMERALD ICE

User friendly

Feature rich

Easy to program

Easy to customize

Audio help

AUDIO HELP

• Press Help button

followed by any

button on the phone

• A friendly voice will

take you step-by-

step through the use

of that feature or any

other that may have

been programmed

on the telephone.

Headset

• Pressing the

Headset button

will turn the

headset on and

off. When the

headset is

enabled that

button will

light.

Announce • Press Announce to change between

answering modes

• • Green LED - Voice Announce

Hands-free reply mode – can reply to

intercom call using speaker phone -

Solid Red LED when intercom call is

received.

• • Red LED - Voice Announce Privacy

Mode – intercom call is heard but

caller can’t hear you. - Slow Flashing

Red LED when intercom call is

received.

• • No LED lit - Tone Ringing Mode –

Intercom caller waits for response

from you. Fast Flashing Green LED

when intercom call is received.

Caller ID

• Caller ID

• Press to see call log. Use volume up and down arrows to scroll through recent calls.

DND

• Do Not Disturb

• Can not be used

when calls are

forwarded.

• Callers will go to

your voicemail

when in DND

LNR

• LNR

• Last Number Redial

Page

• Press Page

• Pages all extensions

Call Park

• Press Call Park button

• Use to Park a call at an

extension.

• Press Park and then

press the extension

where you want the call

to be parked.

• To pick up a parked call

– press Call Park and

the extension where the

call is parked.

Forward Forward• There are several choices for forwarding

your calls:• Direct – Forward all of your calls,• Busy – Forward your calls when your

telephone is busy.• Follow Me – Forward calls at your

extension to the extension where you are currently working (conference room, associate’s office, etc.)

• Follow Preset – Invoke call forward at your extension so that it can be changed from another extension.

• No Answer – Forward your calls for no answer conditions.

• External – Forward calls transferred to your extension to a different telephone number. This feature must be enabled for your extension in database administration

• Forward conditions can be set as follows for each call forward type:-Intercom calls only.-Intercom and outside line (including transferred outside lines) calls.-Outside line (CO Line) calls only.

Voicemail

• Press Voicemail

to access your

voicemail

BUTTON PROGRAMMING

• Press • Press the button that you

want to program. • Press chg• Select dir (directory

example 405) then press save

• OR pgm (program example #4 for Do Not Disturb) then press save

Speed Dial Programming

•Press •Enter the Speed Dial bin (500 – 519) •Press show•Press chg•Enter the # to store•To call the speed dial – assign it to a button or dial the bin # (ex 500)

* 500 – 519 are personal speed dials. 600 – 699 are system speed dials.