EMERALD ICE
description
Transcript of EMERALD ICE
EMERALD ICE
User friendly
Feature rich
Easy to program
Easy to customize
Audio help
AUDIO HELP
• Press Help button
followed by any
button on the phone
• A friendly voice will
take you step-by-
step through the use
of that feature or any
other that may have
been programmed
on the telephone.
Headset
• Pressing the
Headset button
will turn the
headset on and
off. When the
headset is
enabled that
button will
light.
Announce • Press Announce to change between
answering modes
• • Green LED - Voice Announce
Hands-free reply mode – can reply to
intercom call using speaker phone -
Solid Red LED when intercom call is
received.
• • Red LED - Voice Announce Privacy
Mode – intercom call is heard but
caller can’t hear you. - Slow Flashing
Red LED when intercom call is
received.
• • No LED lit - Tone Ringing Mode –
Intercom caller waits for response
from you. Fast Flashing Green LED
when intercom call is received.
Caller ID
• Caller ID
• Press to see call log. Use volume up and down arrows to scroll through recent calls.
DND
• Do Not Disturb
• Can not be used
when calls are
forwarded.
• Callers will go to
your voicemail
when in DND
LNR
• LNR
• Last Number Redial
Page
• Press Page
• Pages all extensions
Call Park
• Press Call Park button
• Use to Park a call at an
extension.
• Press Park and then
press the extension
where you want the call
to be parked.
• To pick up a parked call
– press Call Park and
the extension where the
call is parked.
Forward Forward• There are several choices for forwarding
your calls:• Direct – Forward all of your calls,• Busy – Forward your calls when your
telephone is busy.• Follow Me – Forward calls at your
extension to the extension where you are currently working (conference room, associate’s office, etc.)
• Follow Preset – Invoke call forward at your extension so that it can be changed from another extension.
• No Answer – Forward your calls for no answer conditions.
• External – Forward calls transferred to your extension to a different telephone number. This feature must be enabled for your extension in database administration
• Forward conditions can be set as follows for each call forward type:-Intercom calls only.-Intercom and outside line (including transferred outside lines) calls.-Outside line (CO Line) calls only.
Voicemail
• Press Voicemail
to access your
voicemail
BUTTON PROGRAMMING
• Press • Press the button that you
want to program. • Press chg• Select dir (directory
example 405) then press save
• OR pgm (program example #4 for Do Not Disturb) then press save
Speed Dial Programming
•Press •Enter the Speed Dial bin (500 – 519) •Press show•Press chg•Enter the # to store•To call the speed dial – assign it to a button or dial the bin # (ex 500)
* 500 – 519 are personal speed dials. 600 – 699 are system speed dials.