Post on 23-Nov-2014
EchoLife HG510 Home Gateway
Quick Installation Guide
Copyright © 2005 Huawei Technologies Co., Ltd. All Rights Reserved
No part of this manual may be reproduced or transmitted in
any form or by any means without prior written consent of
Huawei Technologies Co., Ltd.
Trademarks
, HUAWEI are trademarks of Huawei Technologies Co.,
Ltd.
All other trademarks and trade names mentioned in this
manual are the property of their respective holders.
Notice
The information in this manual is subject to change without
notice. Every effort has been made in the preparation of this
manual to ensure accuracy of the contents, but all statements,
information, and recommendations in this manual do not
constitute the warranty of any kind, express or implied.
i
Table of Contents
ECHOLIFE HG510 HOME GATEWAY QUICK GUIDE......... 1
EchoLife HG510 Home Gateway Packing List ......................................1
Getting to Know......................................................................................1
Before Installation ..................................................................................3
Connecting the HG510...........................................................................4
FAQs ......................................................................................................7
Technical Specifications.........................................................................8
Huawei Technologies Proprietary
1
EchoLife HG510 Home Gateway
Quick Guide
Welcome to purchase the EchoLife HG510 Home Gateway device(the
HG510 for short). With your HG510, you can access the Internet using
your high-speed ADSL connection.
This manual shows how to install your HG510.
EchoLife HG510 Home Gateway Packing List
Item Quantity
HG510 1
Power adapter 1
Ethernet cable 1
Phone cable 1
Splitter 1
EchoLife HG510 Home Gateway Quick Guide 1
Qualification Card 1
Getting to Know
The HG510 is a kind of Internal ADSL modem for high speed internet
access. It has a 10/100Base-T Ethernet router to provide Internet
Huawei Technologies Proprietary
2
connectivity to all computers on your LAN.
Rear Panel
The rear panel provides ports for the HG510 to receive/send data and
get power supply..
Label Function
ADSL RJ-11 connector: connects the device to a phone jack using the supplied cable
On/Off Switches the device on and off
RST To reset to default settings, Hold the Reset button for more than 5 seconds and then release the button.
PWR Connects to the supplied power adapter
LAN1-4 RJ-45 connector: connects the device to your computer's Ethernet port, or to the upstream port on your LAN's hub, using the cable provided.
Front Panel
The front panel provides LED indicators to indicate the device status.
Label Color Function
ALARM Red Flashes on/off rapidly during the training mode
Flashes on/off slowly: No ADSL link
Off: The ADSL link is established and active
ADSL LINK
Green On: The ADSL link is established and active
Off: No ADSL link
ADSL ACT
Green Flashes on/off during ADSL data transfer
On: No data transfer
LAN1-4 Green On: The LAN link is established and active
Huawei Technologies Proprietary
3
Label Color Function Off: No LAN link
Flashes during data transfer
PWR Green On: The device is powered on
Off: The device is powered off
Before Installation
The HG510 is used indoors only. Pay attention to the following when
installing and using the HG510.
Environment
Huawei Technologies Proprietary
4
Cleaning
Before cleaning the HG510, cut off the power supply.
Clean it using a piece of soft cloth. Do not use liquid or gas solution.
Power supply
• Use the power adapter delivered with the HG510.
• The voltage of the power supply shall meet the requirement of the
input voltage of the power adapter.
• In the case of thundering, unplug the power adapter;If the HG510
is not in use for a long time, unplug the power adapter.
• Do not open the cover of the HG510.
Connecting the HG510
You need to connect the device to the phone jack, the power outlet,
and your computer or network.
Huawei Technologies Proprietary
5
Before cable connection,turn off power of your
computer(s),LAN/hub/switch (if applicable),and the HG510.
Cable connection:
SPL
ITT
ER
10/100Base-T NICPSTN
LIN
EMO
DE
M
Telephone
PH
ON
E
To PC EthernetDC Power in
Reset
SwitchPower
DC IN
Follow the steps listed below to install it.
Stage Description See in
1 Connect the ADSL line. Step1
2 Connect the Ethernet cable. Step2
3 Attach the power connector. Step3
4 Turn on the HG510 and power up your system Step4
Step1 Connect the ADSL line
Method one: Plug one end of the twisted-pair ADSL cable into the
ADSL port on the rear panel of HG510 and insert the other end into the
wall socket.
Method two: You can use a separate splitter. External splitter can
Huawei Technologies Proprietary
6
divide the data and voice, then you can access the Internet and make
calls at the same time.The external splitter has three ports:
• LINE: connect to the wall jack
• PHONE: connect to the phone sets
• MODEM: connect the ADSL port of HG510
Plug one end of the twisted-pair ADSL cable into the ADSL port on the
rear panel of HG510 and insert the other end into the MODEM port of
the external splitter.
Note: Although you use the same type of cable, ADSL and
PHONE ports are not interchangeable. Do not route
the ADSL connection through the PHONE port.
Setp2 Connect the Ethernet cable
Attach one end of a provided network cable to a regular hub port and
the other to the Ethernet port on the HG510.
Step3 Attach the power adapter
Connect the AC power adapter to the PWR connector on the rear of
the device and plug in the adapter to a wall outlet or power strip.
Step4 Turn on the HG510 and power up your system
Press the power switch on the rear panel of the device to the ON
position.
Turn on and boot up your computer(s) and any LAN devices such as
hubs or switches.
Huawei Technologies Proprietary
7
FAQs
Failure Instruction
Power light is out.
• Ensure the power adapter is well connected
• Ensure the right power adapter is used
ADSL LINK light is out.
• Ensure the ADSL line is well connected
• Test with a phone to ensure the phone cable before entering the house is valid
• Check that there is no junction box before connecting HG510, which has such components like capacitors or diodes that could hinder back high frequency signals
• Ensure the router and phones are properly connected.
LAN LINK light is out
• Ensure you use the right cables from the router to your computer
• Ensure the connection is secured;Check if the NIC LED lights up;
• Ensure your NIC works normally by examining whether the item of ¡°Networking Device¡± is labeled with ¡°?¡± or ¡°!¡±. If it is, you may delete it and then click <Refresh> to reinstall.
• Otherwise you may try the NIC in another slot. As a last resort, you have to replace the NIC.
Fail to access the Internet
Take the most common access mode as an example, in which a dial-up application is installed on your computer
• Ensure that any of the problems above is not the reason
• Ensure that the dial-up application is correctly installed and set on your computer
• Ensure that you have entered the right user name and password
• Ensure ¡°Use Proxy Server¡± is set properly for IE, if the problem still remains even after you have logged into successfully
Huawei Technologies Proprietary
8
Failure Instruction
• Try to access more than one Web sites, in case of some Web server’s being in failure
Technical Specifications
Item Specification
Whole-system consumption 10W
Power supply O/P 15V DC/400mA
Dimensions(L�W�H) 147.7mm�130.0mm�35.3mm
Operating temperature 0℃-40℃
Storage temperature -10℃-65℃
This product has been designed to comply with the requirements on
environmental protection. For the proper storage, use and disposal of
this product, national laws and regulations must be observed.
Huawei Technologies Co., Ltd.
Administration Building, Huawei Technologies
Co., Ltd., Bantian, Longgang District,
Shenzhen, P. R. China
Postal Code: 518129
Website: http://www.huawei.com
Email: support@huawei.com