Post on 16-Jan-2022
Easy Origami Box
1 2
Step 1) Start with a square sheet of paper. Fold the paper in
half horizontally. Crease it well and then unfold it.
Step 2) Fold the paper in half vertically. Crease it well and then
unfold it.
3
3 Step 3) Fold the corner of the paper
to the center. You’ll do this on each
of the 4 corners.
4 5 & 6
Step 4) Fold the top half of the model in half to the center.
Step 5) Fold the bottom half of the model in half to the center.
Step 6) Crease both these folds very well and then unfold them.
7 7 Step 7) Rotate the model 180° and repeat Step 6.
8 9
Step 8) Unfold the top and bottom triangles of paper.
Step 9) Fold the and left sides of the model to the center.
Part of this crease is already here which will make it a bit easier.
10 11
12
Step 10) Slowly pull the model open at
the tops. The creases here are already
made.
Step 11) When you pull the model open
it should take a shape that looks like this.
The creases are all already made so eve-
rything should fall into place.
Step 12) Fold the flap of paper down
along the intersection of the two trian-
gles. This will form the edge of the box.
Fold the top triangle of paper up a little
bit to fit into place at the bottom of the
box. 12
Now you have a completed box!
If you want to make a lid, you
can either use larger paper or
when you get to Step 3, just
don’t fold the corners all the way
into the center.
Completed box Completed box with lid