Post on 02-Aug-2020
332315AEN
Repair-Parts
E4-55 Meter-Mix Dispense Systems
For metering, mixing, and dispensing of silicone material.For professional use only.
Not approved for use in European explosive atmosphere locations.
See page 2 for model information, including maximum working pressure and approvals.
Important Safety InstructionsRead all warnings and instructions in this manual and in the E4-55 Meter-Mix Dispense Systems-Operations manual. Save all instructions.
Models
Models
Related Manuals
Part No.Maximum Working
Pressures Description
E4-55-55M-LR
3000 (21,207)
PLC, Encoder Controlled, 1:1 to 2:1 Variable Ratio, 55-Gallon Meter Mix Machine. Machine uses B443M Base Pumps with check assemblies for enhanced control. Machine has 6 in. (15 cm) ram air cylinders, Parallel Low-Rider frame with Shrouded Casters.
E4-55-55M-L2
PLC, Encoder Controlled, 1:1 to 2:1 Variable Ratio, 55-Gallon Meter Mix Machine. Machine uses B443M Base Pumps with check assemblies for enhanced control. Machine has 6 in. (15 cm) ram air cylinders, In Line Low-Rider frame with Shrouded Casters.
Manual Description
332314 E4-55M Meter-Mix Dispense Systems,Operation
Page 2
PNEUMATIC CIRCUIT DIAGRAMSAND
PARTS LIST
E4-55M
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Related Manuals
Page 9
123417
16U232
123111FAA081100
122763
080024
1130706305-73239018
121051
REFER TO TABLE A
Page 10
94/1027/98
NOTE:COLOR KIT -MODEL #SK560 (3-GALLON)SEE MANUAL SK56001M(REF ~ SHOWN)orMODEL SK553 (3-QUART)SEE MANUAL SK55301M(REF ~ NOT SHOWN)
SEE MODEL SK556BARREL STACK
MANUAL SK55601M(KIT INCLUDES:
SA914-3A (2-SH263-1A)SM327-12 & SM327-WJ
Page 11
PARTS LIST (E4-55 MODELS)
PART NO. DESCRIPTION QTY
080024 FITTING,NIPPLE,3/4NPTM,4",304 SS 2113070 FITTING,NIPPLE,REDUCER,3/8-14 2121051 PLUG,3/8" NPT,SST 2122763 FITTING,ELBOW,STR,3/4NPT,90 2123111 FITTING,NIPPLE,HEX,3/4NPT,3K,SS 2123417 FITTING,ADPTR,3/4 NPTM X 3/4 JIC 2239018 VALVE,BALL,SST 216U232 VALVE,BALL, 3/4, SS,4500PSI 26305-73 FITTING,ELBOW,90,1/4NPT,FF,316SS 294/1027/98 ADAPTER,JIC12X1/2NPT,MM,SS 2FAA081100 VALVE,CHECK 3/4NPT,FXF,7KPSI,SS 2
TABLE A - Hoses for M4-55 Machines
PART NO. DESCRIPTION LENGTH
MATERIAL
COMPONENT TYPE
24R216 HOSE,ASSY,"A",3/4X120 120"24R217 HOSE,ASSY,"A",3/4X156 156"24R218 HOSE,ASSY,"A",3/4X180 180"16U736 HOSE,ASSY,3/4X120,SS,BRD,WHT 120"16U737 HOSE,ASSY,3/4X156,SS,BRD,WHT 156"16U738 HOSE,ASSY,3/4X180,SS,BRD,WHT 180"24R243 HOSE,CLPD,120L,3/4ID,1-1/16JIC 120" A or B Industrial
A
B
Medical
Page 12
Related Manuals
Page 13
FAA
0600
14 (2
)
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Ass'y #080006 Ass'y #080292 Ass'y #080005 Ass'y #080291
316SS ~ 1/4" N.P.T. 316SS ~ 1/2" N.P.T. Brass ~ 1/4" N.P.T. Brass ~ 1/2" N.P.T.
1. Insert Lock Screw 080272 080273 080278 080279
2. Insert 080268 080269 080274 080275
3. O-Ring 00009V 00059V 00009B 00059B
4. Poppet 080270 080271 080276 080277
5. Spring 040182 040186 040182 040186
6. Body 080299 080300 080297 080298
F.A.I. PART NUMBERS
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Page 41
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Related Manuals
Page 49
All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original instructions. This manual contains English. MM 332315
Graco Headquarters: MinneapolisInternational Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2013, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.www.graco.com
Graco Standard WarrantyGraco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERSThe Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco InformationFor the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.Phone: 612-623-6921 or Toll Free: 1-800-746-1334 Fax: 330-966-3006