Post on 12-Jan-2016
description
www.�irsecurity.com/proMNTNX1R_INSTALLATION_DIAGRAM_EN_R2
Dimension (units: mm)
Weight (corner mount adapter only): 1.7kg / 3.7lbs
MNTNX1RCorner Mount Adapter
Make sure to install in an area that can support the weight of the camera and accessories.
Package Contents
Compatible Products
MNTNV16WMNTNV16CMNTNB1XJMNTNB1XJW
DNZ30TL2RMNTNZ30C
Visit www.�irsecurity.com/pro for the latest compatibility list
Corner Mount Adapter 1pcs M8x25 Hex Bolt 4pcsSpring Washer 4pcsFlat Washer 4pcs
170.
0
119.
0
80.0
119.
090
.0
24384.048.0
Φ100.0Φ35.0
Φ56.0
Φ84.0
4-M8 EQU
4-M84-M66-M4
40.0
8-Φ9.0
130.0
138.
0
80.0
Corner Mount Adapter
M8×60 Bolt 4pcs
M8×25 Hex Bolt 4pcs
Flat Washer 4pcsSpring Washer 4pcsNut 4pcs
Spring Washer 4pcsFlat Washer 4pcs
13
2
4
Mark 4 holes through the corner mount adapter.
Drill holes into the surface. Insert the M8x60 bolts (4pcs) into the holes.
Place the corner mount against the wall. Use 1pcs spring washer, 1pcs �at washer, and 1pcs nut on each M8x60 bolt (4pcs) to secure the corner mount adapter to the surface.
5
Place 1pcs spring washer and 1pcs �at washer on each M8x25 hex bolt (4pcs). Attach the mount (not included) to the corner mount adapter using the M8x25 hex bolts (4pcs).
M8x60 Hex Bolt 4pcsSpring Washer 4pcsFlat Washer 4pcsNut 4pcs