Custom Project LifecycleIt’s never been easier to get your hands on custom SeaDek; although it may take some time. Please refer to the guide below to get a rough idea of the entire custom project process.

Step 1

Check our website for your boat kit (seadek.com ► Shop ► Made to Order ► Find Your

Boat). If you don’t see your boat on our website, please

contact our Customer Advocate Team for availability. If we don’t have your drawing

on file, proceed to Step 2.

SeaDek has an extensive network of Certified Fabricators

and Installers trained to work on custom projects. Please use the Certified Locator Map on our website to find one near

you. If a Certified Expert isunavailable, or you would

prefer DIY, proceed to Step 3.

To proceed, purchase a Template Kit and template the boat yourself. Ship your finished

templates back to the addressin the bottom right corner.

Once your template has been scanned, a drawing will be

generated. This may take up to7 business days to complete.

Next, you will receive your drawing and a quote via email. Please provide payment info at this time. Once your information

is confirmed, a Dry Fit will be generated and mailed out atno cost to you. Please allow 5

business days for Dry Fit creationand 3-7 days for shipping.

Part #3B i l l Thompson737- 1 84-8309

Part #5B i l l Thompson737- 1 84-8309

31 2 3

Swi tc

h te

ak d

i rec

t i on

en l arge pad by 1 /4 ”

A d d ha tch

Please contactour Customer

Advocate Team for more information,

or to begin creating your custom

SeaDek kit today!

Please ship Templatesand Dry Fits to:Attention Scans

851 Greensboro RoadCocoa, FL 32926

endusersales@seadek.com 321-632-4466

4-047 - Custom Project Lifecycle - Rev C 06-12-2021

Step 3

Check SeaDek.comfor Your Kit

Step 2

Search for a CertifiedFabricator or Installer

TemplateYour Boat

Step 5

Once you receive your DryFit in the mail, either approve your Dry Fit via email or ship

your Dry Fit with drawn revisions to the address in the blue box

to the right. If you approve your Dry Fit, there is noneed to ship it back.

When we receive your Dry Fitwith noted changes, we willbegin working on a revised

drawing. This process generally takes 5 business days. A revised drawing will be emailed to youfor review or you may requestto purchase a second Dry Fit.

Once you have approved your Dry Fit or revised drawing, your custom representative will send your kit off to production. Please note that our standard

production lead time is 15 business days. You will receive

an email upon completion with shipping information.

This process, timeline, and costs are specific to orders within the 48 contiguous United States. Please reach outto endusersales@seadek.com for information on orders originating outside of the contiguous United States.

Step 7

ReceivingYour Dry Fit

Step 6

Revisions(Optional)

Production& Shipping

Step 4

Drawing& Dry Fit