Custom Project Lifecycle
Transcript of Custom Project Lifecycle
Custom Project LifecycleIt’s never been easier to get your hands on custom SeaDek; although it may take some time. Please refer to the guide below to get a rough idea of the entire custom project process.
Step 1
Check our website for your boat kit (seadek.com ► Shop ► Made to Order ► Find Your
Boat). If you don’t see your boat on our website, please
contact our Customer Advocate Team for availability. If we don’t have your drawing
on file, proceed to Step 2.
SeaDek has an extensive network of Certified Fabricators
and Installers trained to work on custom projects. Please use the Certified Locator Map on our website to find one near
you. If a Certified Expert isunavailable, or you would
prefer DIY, proceed to Step 3.
To proceed, purchase a Template Kit and template the boat yourself. Ship your finished
templates back to the addressin the bottom right corner.
Once your template has been scanned, a drawing will be
generated. This may take up to7 business days to complete.
Next, you will receive your drawing and a quote via email. Please provide payment info at this time. Once your information
is confirmed, a Dry Fit will be generated and mailed out atno cost to you. Please allow 5
business days for Dry Fit creationand 3-7 days for shipping.
Part #3B i l l Thompson737- 1 84-8309
Part #5B i l l Thompson737- 1 84-8309
31 2 3
Swi tc
h te
ak d
i rec
t i on
en l arge pad by 1 /4 ”
A d d ha tch
Please contactour Customer
Advocate Team for more information,
or to begin creating your custom
SeaDek kit today!
Please ship Templatesand Dry Fits to:Attention Scans
851 Greensboro RoadCocoa, FL 32926
[email protected] 321-632-4466
4-047 - Custom Project Lifecycle - Rev C 06-12-2021
Step 3
Check SeaDek.comfor Your Kit
Step 2
Search for a CertifiedFabricator or Installer
TemplateYour Boat
Step 5
Once you receive your DryFit in the mail, either approve your Dry Fit via email or ship
your Dry Fit with drawn revisions to the address in the blue box
to the right. If you approve your Dry Fit, there is noneed to ship it back.
When we receive your Dry Fitwith noted changes, we willbegin working on a revised
drawing. This process generally takes 5 business days. A revised drawing will be emailed to youfor review or you may requestto purchase a second Dry Fit.
Once you have approved your Dry Fit or revised drawing, your custom representative will send your kit off to production. Please note that our standard
production lead time is 15 business days. You will receive
an email upon completion with shipping information.
This process, timeline, and costs are specific to orders within the 48 contiguous United States. Please reach outto [email protected] for information on orders originating outside of the contiguous United States.
Step 7
ReceivingYour Dry Fit
Step 6
Revisions(Optional)
Production& Shipping
Step 4
Drawing& Dry Fit