Post on 14-Aug-2020
K.C. Industrial Trading Sdn. Bhd.
Brand COOLMAN
Coolman A88 4" (100mm) Dry Cutting Blade
Description
The COOLMAN A88 Dry Segmented Blade are ideal for cutting thoughsurfaces like brick, granite, concrete, roof, pavers. It is engineered for fastand smooth cutting in many general applications. It can be used dry, sousers can remove the mess that wet cutting creates (Please wear dustmask for health purposes), so users can easily finish their job even atconstruction sites. It can also be used wet, so the blade’s life can beprolonged and lesser chipping. It can be used on angle grinders and tilessaw.
Specifications : - Application Material : Bricks & Blocks, Concrete, Granite, Hard Bricks,Harden Roof Tiles, Paver- Segment Height : 10mm- Segment Width : 1.8mm - Cut Depth : 1" (25.4mm) - Operating Min Speed : 9,072 Rpm - Operating Max Speed : 15,000 Rpm - Bore Diameter : 16mm/ 20mm- Usage : Dry Cut, Wet Cut - Equipment : Angle Grinder , Stone Cutter
Brand COOLMAN
Coolman C88 4" (100mm) Cutting Blade
Description
The COOLMAN C88 Continuous Rim Blade will cover most of theapplications. Definitely a great value for fast, chip-free cutting in a widevariety of ceramic, tiles, marble and granite. Wet cut is recommended forthis blade.
Specifications : - Application Material : Ceramic Tiles, Granite, Marble, Medium Hard Tiles- Characteristic : Precise, Eco-cut, Longer Life - Segment Height : 5.5mm- Segment Width : 1.5mm - Cut Depth : 1" (25.4mm) - Operating Min Speed : 9,072 Rpm - Operating Max Speed : 15,000 Rpm - Bore Diameter : 16mm/ 20mm- Usage : Dry Cut, Wet Cut - Equipment : Angle Grinder , Stone Cutter
1 of 73
2 of 73
Brand COOLMAN
Coolman CT88 4" (105mm) Cutting Blade
Description
The COOLMAN CT88 Thin Turbo Rim Blade will cover most of theapplications. Definitely a great value for fast, chip-free cutting in a widevariety of ceramic, tiles, marble, granite and also hard tiles. Wet cut isrecommended for this blade.
Specifications : - Application Material : Ceramic Tiles, Granite, Marble, Medium Hard Tiles- Characteristic : Fast Cut, Longer life Span, Precise - Core Ingredient : Synthetic Diamond- Segment Height : 10mm- Segment Width : 1.4mm - Cut Depth : 1" (25.4mm) - Operating Min Speed : 9,072 Rpm - Operating Max Speed : 15,000 Rpm - Bore Diameter : 16mm/ 20mm- Usage : Dry Cut, Wet Cut - Equipment : Angle Grinder , Stone Cutter - Grade : Precise Premium
Brand COOLMAN
Coolman G88 4" (100mm) Cutting Blade
Description
The COOLMAN G88 Dry Segmented Blade are ideal for cutting thoughsurfaces like brick, granite, concrete, roof, pavers. It is engineered for fastand smooth cutting in many general applications. It can be used dry, sousers can remove the mess that wet cutting creates (Please wear dustmask for health purposes), so users can easily finish their job even atconstruction sites. It can also be used wet, so the blade’s life can beprolonged and lesser chipping. It can be used on angle grinders and tilessaw.
Specifications : - Application Material : Brick Wall, Green Concrete, Premix, Roof Tile,Sand Brick, Stone Brick - Characteristic : Cost Saving, Fast Cut - Segment Height : 10mm- Segment Width : 1.8mm - Cut Depth : 1" (25.4mm) - Operating Min Speed : 9,072 Rpm - Operating Max Speed : 15,000 Rpm - Bore Diameter : 16mm/ 20mm- Usage : Dry Cut, Wet Cut - Equipment : Angle Grinder , Stone Cutter - Grade : Soft Standard
3 of 73
Brand COOLMAN
Coolman TCT10030AT 4" (100mm) CuttingBlade
Description
The COOLMAN TCT saw blade designed for the professional contractorand remodeler. It contain with 100% pure raw materials ensure to performgreat performance and long life span. Ideal for any construction projectinvolving wood or wood composite.
Specifications : - Application Material : Formwork, Hard Wood, Oriented Stand Board,Plywood, Soft Wood- Characteristic : Able to cut wood with Nails, Finishing Crosscut - Core Ingredient : 100% Raw Material Tungsten Carbide - Tooth Design : Alternate Top Bevel Ground - Tooth Count : 30 Teeths- Hook Angle : 10 Degree- Cut Depth : 1" (25.4mm) - Operating Min Speed : 9,072 Rpm - Operating Max Speed : 15,000 Rpm - Bore Diameter : 16mm/ 20mm- Usage : Dry Cut- Equipment : Circular Saw - Grade : Supreme
4 of 73
Brand COOLMAN
Coolman T88 4" (100mm) Cutting Blade
Description
The COOLMAN T88 Continuous Turbo Rim Blade is ideally used forcutting a wide range of materials for general use such as cured concrete,bricks, stone, and granite. It can be used on right angle grinders and tilessaw.
Specifications : - Application Material : Burnt Clay Brick, Cured Concrete, Harden RoofTile, Paver, Reinforcement Concrete, Roof Tile - Characteristic : Fast Cut, Safety & Stability- Segment Height : 10mm- Segment Width : 2mm - Max Cut Depth : 1" (25.4mm) - Operating Min Speed : 9,072 Rpm - Operating Max Speed : 15,000 Rpm - Bore Diameter : 16mm/ 20mm- Usage : Dry Cut, Wet Cut - Equipment : Angle Grinder , Stone Cutter - Grade : Hard Premium
Brand LAUNTOP.
LT7500MXE GASOLINE GENERATOR
Description
Specifications :
Voltage : 240VFrequency : 50HzRate & Max AC Output : 5.5/6.6DC Output : 12hpStarting System : Manual / Electric Fuel Consumption : < 460 g/kW h Displacement : 420ccEnergy Speed : 3000/3600rpmOil Capacity : 1.1LFuel Tank Capacity : 25LDimension : 745 x 555 x 650Noise level at 7M : <75Net Weight : 90kgs
Brand LAUNTOP.
LT3800MX GASOLINE GENERATOR
5 of 73
Description
Specifications :
Voltage : 240VFrequency : 50HzRate & Max AC Output : 3.0/3.3DC Output : 12hpStarting System : Manual Fuel Consumption : < 550 g/kW h Displacement : 223ccEnergy Speed : 3000/3600rpmOil Capacity : 0.6LFuel Tank Capacity : 16LDimension : 685 x 512 x 550Noise level at 7M : <72 db(A)Net Weight : 68kgs
Brand LAUNTOP.
LT1200CL GASOLINE GENERATOR
Description
Specifications :
Voltage : 240VFrequency : 50HzRate & Max AC Output : 0.9/1.0DC Output : 12hpStarting System : Manual Fuel Consumption : < 920 g/kW h Displacement : 87ccEnergy Speed : 3000/3600rpmOil Capacity : 0.4LFuel Tank Capacity : 5.2LDimension : 465 x 375 x 380Noise level at 7M : <93Net Weight : 27kgs
Brand RILON
TIG200A TIG MACHINE C/W TIG TORCHARGON REGULATOR WITH FLOWMETER
Description
Rilon TIG 200A Tig Machine has an advanced inverter technology thatdelivers superior TIG performance. It has Untouch Start DC Tig Operationwhich allows you to strike the arc easily with high frequency, and makes iteasy to establish an arc under a variety of conditions. It also hasautomatic Hot Start to boost the current during starting to make striking anarc easier. The integral gas and power connector for simple torchconnections and quick changes between TIG and stick welding. It haswide range input voltage : 220V ± 15%. It can auto reconnect for singlephase (110V) or 220V 50/60Hz input power. It also has energy savingcompare to the traditional TIG machine more efficient.
Specifications :
Input Voltage/ Phase/ Frequency : 220V/1P/50-60HzOutput Current/ Voltage/ Duty Cyle : 200A/18V/60%@25°C and 155A/16.2V/100%@25°CAmps Input at Rated Output : 26A @ 200AOutput Range/OCV : 10-200A/40VDimension : 400mm x 153mm x 291mmWeight : 9kgs
6 of 73
7 of 73
Brand RILON
RILON ARC 200T WELDING INVERTER
Description
Classical ARC200T is an excellent, professional, reliable and rugged.Classical ARC200T is a great choice for welding on mild steel, low alloyand stainless steel as well as cast iron and hardfacing for maintenance,repair, light fabrications and hobby projects.
Classic ARC 200T welding machine has an outstanding ARC stability withlow spatter. It has the features of Auto Protection against over voltage andover current. It's auto adaptive arc force minimizes electrode sticking in thepuddle without compromising arc stability or increased spatter. ThisARC200T Welding Machine has an automatic hot start which able toboost the current during starting to make striking an arc easier. It has awide range for input voltage 220/230±15%.It has a super portable withadjustable shoulder strap (you can carry anywhere) and energy saving.
Specifications :
Input voltage/ Phase/ Frequency : 220V/1P/50-60HzOutput Current/ Voltage/ Duty Cycle : 160A/26.5V/30%@25°C and 130A/25.2V/100% @25°CAmps Input at Rated Output : 30.8A @160AOutput range/ OCV : 30-160A/ 60VDimension : 395mm x 155mm x 301mmWeight : 7.5kgs
Brand RILON
RILON ARC 160 WELDING MACHINE
Description
The Classic ARC 160 is dependable, professional, reliable and rugged.This Classic ARC 160 able to deliver up to 160 amps DC for stick weldingin vocational education, industrial productions, maintenance and repair orfarm shop environments.
Classic ARC 160 welding machine has an outstanding ARC stability withlow spatter. It has the features of Auto Protection against over voltage andover current. It's auto adaptive arc force minimizes electrode sticking in thepuddle without compromising arc stability or increased spatter. This ARC160 Welding Machine has an automatic hot start which able to boost thecurrent during starting to make striking an arc easier. It has a wide rangefor input voltage 1P220/230±15% or 1P110/220±15% . It has a superportable with adjustable shoulder strap (you can carry anywhere) andenergy saving.
Specifications :
Input Voltage/ Phase/ Frequency : 220V/1P/50-60HzOutput Current/ Voltage/ Duty Cycle : 145A/25.6V/30%@25°C and 108A/ 24.3V/100% @25°CAmps Input at Rated Output : 26.2A @145AOutput range/ OCV : 40-145A/ 80VDimension : 290mm x 132mm x203mm Weight : 5.5kgs
8 of 73
Brand TSUNAMI
TSUNAMI JLM400A AUTO SELF-PRIMINGPUMP
Description
JLM series is an automatic cold and hot water turbine self-priming pump. It is widely used in living water taking,pumping well water, tap water and 100°C hot water,household boosting, garden and farming irrigations.
It is suitable for non-flammable or non-explosive clear waterwithout abrasive or fiber and not aggressive to stainless steelas well as irrigating 100°C hot water.
Specifications :
Power : 300WVoltage/ Frequency : 230V/ 50HzSpeed : 2,860rpmMax Flow : 2m3/ hrCurrent : 2.5ASuction : 8mMax Head : 30mInlet Diameter : 25mmNet Weight : 9kgs
Brand TSUNAMI
TSUNAMI JLM200A AUTO SELF-PRIMINGPUMP
Description
JLM series is an automatic cold and hot water turbine self-priming pump. It is widely used in living water taking,pumping well water, tap water and 100°C hot water,household boosting, garden and farming irrigations.
It is suitable for non-flammable or non-explosive clear waterwithout abrasive or fiber and not aggressive to stainless steelas well as irrigating 100°C hot water.
Specifications :
Power : 200WVoltage/ Frequency : 230V/ 50HzSpeed : 2,860rpmMax Flow : 2m3/ hrCurrent : 2ASuction : 8mMax Head : 25mInlet Diameter : 25mmNet Weight : 8.8kgs
9 of 73
Brand TSUNAMI
TSUNAMI HPC12100 HIGH PRESSURECLEANER (100BAR)
Description
TSUNAMI HPC12100 High Pressure Cleaner basically hasfour poles electric motor fits overload protection. It's motor iscover with aluminium casing. It also has a commercial gradedirect drive brass cylinder ceramic plungers radial directionpump. 8" semi filled wheel with 5m cable and 8m highpressure hose. The pressure is adjustable as well as it hastrigger gun with safety lock.
Specifications :
Voltage : 240VFrequency : 50HzOutput : 2.2kWRevolution : 1,450rpmMax Pressure : 100barFlow : 12 l/minMax Water Inlet Temperature : 50°C
Brand AR BLUE CLEAN
AR BLUE CLEAN BC610 HIGH PRESSURECLEANER (130BAR)
Description
AR Blue Clean BC610 High Pressure Cleaner is equipped by :
• Triplex pump with ceramic plungers, connecting rod system• Automatic by-pass valve• Pressure adjustment• Pressure gauge• Built-in detergent suction• Single phase motor w/thermal protector• Power supply cord length 5m• Water filter• 8m high pressure soft type hose, gun and lance• Adjustable high/low pressure and fan/pencil jet spray head
Specifications :
• Absorbed Power : 2.2kW• Max Pressure : 130 bar• Flow Rate : 8.3 l/min• RPM : 2,800• Weight : 18 kgs• Max Temperature : 60 °C • V/ Hz : 230V / 50 Hz
10 of 73
Brand Lavor
LAVOR ONE PLUS 130 HIGH PRESSURECLEANER C/W STANDARD ACCESSORIES
Description
LAVOR ONE PLUS 130 High Presure Cleaner is light and ultra compactcold water high pressure cleaner with innovative design. Lavor One Plus 130 is versatility and light weight with 3 pistons,aluminium pump head with built-in by pass valve. It has automatic stopsystem as well as access storage system. Trolley with ergonomic handleand granting excellent mobility. Lavor One Plus 130 also comes withhose holder. Specifications :
• Max pressure : 130 Bar• Delivery Rate : 420 l./h• Absorbed power : 1800 W • Weight : 6.9 kg
Brand Lavor
LAVOR SPLIT 120 HIGH PRESSURECLEANER C/W STANDARD ACCESSORIES
Description
LAVOR SPLIT 120 is Ultra compact and portable cold water highpressure cleaner with innovative design. LAVOR SPLIT 120 has built-ininduction motor powered. Low maintenance motor with three pistons,aluminium pump head with built-in by-pass valve. Automatic stop system.Ultracompact and portable. Ergonomic handle. Gun with quick connection.
Specifications :
• Max Pressure : 120 Bar• Delivery Rate : 360 l/h • Absorbed Power : 1,800 W
11 of 73
Brand Lavor
LAVOR SPLIT 120 HIGH PRESSURECLEANER C/W STANDARD ACCESSORIES
Description
LAVOR SPLIT 120 is Ultra compact and portable cold water high pressurecleaner with innovative design. LAVOR SPLIT 120 has built-in inductionmotor powered. Low maintenance motor with three pistons, aluminiumpump head with built-in by-pass valve. Automatic stop system.Ultracompact and portable. Ergonomic handle. Gun with quick connection.
Specifications :
Max Pressure : 120 BarDelivery Rate : 360 l/h Absorbed Power : 1,800 W
Brand Lavor
LAVOR ONE PLUS 130 HIGH PRESSURECLEANER C/W STANDARD ACCESSORIES
Description
LAVOR ONE PLUS 130 High Presure Cleaner is light and ultra compactcold water high pressure cleaner with innovative design. Lavor One Plus 130 is versatility and light weight with 3 pistons,aluminium pump head with built-in by pass valve. It has automatic stopsystem as well as access storage system. Trolley with ergonomic handleand granting excellent mobility. Lavor One Plus 130 also comes with hoseholder.
Specifications :
• Max pressure : 130 Bar• Delivery Rate : 420 l./h• Absorbed power : 1800 W • Weight : 6.9 kg
Brand AR BLUE CLEAN
AR BLUE CLEAN BC610 HIGH PRESSURECLEANER (130BAR)
Description
AR Blue Clean BC610 High Pressure Cleaner is equipped by :
Triplex pump with ceramic plungers, connecting rod system Automatic by-pass valvePressure adjustmentPressure gaugeBuilt-in detergent suctionSingle phase motor w/thermal protectorPower supply cord length 5mWater filter8m high pressure soft type hose, gun and lanceAdjustable high/low pressure and fan/pencil jet spray head
Specifications :
12 of 73
Absorbed Power : 2.2kWMax Pressure : 130 barFlow Rate : 8.3 l/minRPM : 2,800Weight : 18 kgsMax Temperature : 60 °C V/ Hz : 230V / 50 Hz
Brand GEKA
ELIFLUX BAB-S SUBMERGED ARCWELDING FLUX
Description
GEKA ELIFLUX BAB-S is categorised as a Submerged Arc Welding Flux.
Brand GEKA
ELIFLUX BFB SUBMERGED ARC WELDINGFLUX
Description
ELIFLUX BFB is categoried as a Submerged Arc Welding Flux.
Brand GEKA
ELCOR R 81 Ni RUTILE TYPE FLUX COREDWIRE
Description
ELCOR R 81 Ni is categorised as a Rutile Type Flux Cored Wire.
Standards :
TS EN ISO 17632-A : T 46 4 1Ni P C 1EN ISO 17632-A : T 46 4 1Ni P C 1AWS A5-29 : E 81 T1-Ni1 C
Chemical Composition of Welding Wire %(Typical) :
C : 0.05Si : 0.50Mn : 1.30 P : <0.015S : <0.015Ni : 0.90
Mechanical Properties-% (Typical) :
(Typical values : with CO2 gas)
Yield Strength (N/mm²) : min. 460Tensile Strength (N/mm²) : 560-690Impact Strength (ISO-V/-40°C) : 50 JImpact Strength (ISO-V/-30°C) : 80 JElongation (%) : >24Heat Treatment : AW
13 of 73
Brand GEKA
ELCOR R 71 RUTILE TYPE FLUX COREDWIRE
Description
GEKA ELCOR R 71 is categorised as a Rutile Type Flux Cored Wire.
Standards :
TS EN ISO 17632-A : T 42 4 P C 1 H5EN ISO 17632-A : T 42 4 P C 1 H5AWS A5.20 : E 71 T-1C-J
Chemical Composition of Welding Wire %(Typical) :
C : 0.06Si : 0.5Mn : 1.3P : 0.015Si : 0.015
Mechanical Properties :
Yield Strength (N/mm²) : min. 420Tensile Strength (N/mm²) : 500-640Impact Strength (ISO-V/-40°C) : min. 50 JElongation (%) : min. 22Heat Treatment : AW
14 of 73
Brand GEKA
ELOX SG 316L STAINLESS STEEL GASSHIELDED WELDING ROD
Description
GEKA ELOX SG 316L is categorised as Stainless Steel Gas ShieldedWelding Rod.
Standards :
TS EN ISO 14343-A : W Z 19 12 3 LEN ISO 14343-A : W Z 19 12 3 LAWS A5.9 : ER 316 L
Chemical Composition of Welding Wire %(Typical) :
C : 0.02Si : 0.5Mn : 1.6Mo : 2.2Cr : 18.5Ni : 11.5
Mechanical Properties (TIG) :
Yield Strength (N/mm²) : min. 420Tensile Strength (N/mm²) : 570-700Impact Strength (ISO-V/+20°C) : min. 63 JElongation (%) : min. 35
15 of 73
Brand GEKA
ELOX SG 308L STAINLESS STEEL GASSHIELDED WELDING ROD
Description
ELOX SG 308L is categorised as Stainless Steel Gas Shielded WeldingRod.
Standards :
TS EN ISO 14343-A : W 19 9 LEN ISO 14343-A : W 19 9 LAWS A5.9 : ER 308 L
Chemical Composition of Welding Wire-%(Typical) :
C : <0.02Si : 0.5Mn : 1.7Cr : 20.1Ni : 9.8
Mechanical Properties (TIG) :
Yield Strength (N/mm²) : min. 390Tensile Strength (N/mm²) : 540-660Impact Strength (ISO-V/+20°C) : min. 63 JElongation (%) : min. 35
Brand GEKA
SG CrMo 2 HEAT RESISTING ARCWELDING WIRES & RODS
Description
GEKA SG CrMo 2 is category as a Heat Resisting Arc Welding Wires &Rods.
Standards :
TS EN ISO 21952-A : G Z Cr Mo 2 SiEN ISO 21952-A : G Z Cr Mo 2 SiTS EN ISO 21952-A : W Z Cr Mo 2 SiEN ISO 21952-A : W Z Cr Mo 2 SiAWS A5.28 : ER 90 S-B3
Chemical Composition of Welding Wire-%(Typical) :
C : 0.08Si : 0.6Mn : 0.5Mo : 1.0Cr : 2.4
Mechanical Properties (TIG) :
Yield Strength (N/mm²) : min. 540Tensile Strength (N/mm²) : 620-760Impact Strength (ISO-V/+20°C) : min. 47 JElongation (%) : min. 20Heat Treatment : 690°C/1h/300°C air
16 of 73
Brand GEKA
SG 2 GAS SHIELDED ARC WELDINGWIRES & RODS
Description
GEKA SG 2 is a gas Shielded Arc Welding Wires & Rods .
Standards :
TS EN ISO 14341-A : G3 Si 1TS EN ISO 636-A : W3 Si 1EN ISO 14341-A : G3 Si 1EN ISO 636-A : W3 Si 1AWS A5.18 : ER 70 S-6
Chemical Composition of Welding Wire-%(Typical) :
C : 0.08Si : 0.85Mn : 1.45
Mechanical Properties (MAG/M21) :
Yield Strength (N/mm²) : min. 420Tensile Strength (N/mm²) : 500-640Impact Strength (ISO-V/-30°C) : min. 47 JElongation (%) : min. 22
Brand GEKA
TEMPO B 65 LOW ALLOYED HIGHSTRENGTH ELECTRODE
Description
GEKA TEMPO B 65 is a low alloyed high strength electrode.
Standards :
TS EN ISO 18275-A : E 55 6 1 NiMo B 42 H5EN ISO 18275-A : E 55 6 1 NiMo B 42 H5AWS A5.5 : E 8018 - G H4
Chemical Composition of Weld Metal-%(Typical) :
C : 0.06Si : 0.3Mn : 1.2Ni : 0.8Mo : 0.35
Mechanical Properties :
Yield Strength (N/mm²) : min. 550Tensile Strength (N/mm²) : 630-750Impact Strength (ISO-V/-60°C) : 100 JElongation (%) : min. 22
17 of 73
Brand GEKA
LASER B 55-S LOW HYDROGENELECTRODE
Description
GEKA LASER B 55-S is a low hydrogen electrode.
STANDARDS :
TS EN ISO 2560-A : E 46 6 B 42 H5EN ISO 2560-A : E 46 6 B 42 H5AWS A5.1 : E 7018 - 1 H4
Chemical Composition of Weld Metal-%(Typical) :
C 0.08Si 0.4Mn 1.4
Mechanical Properties :
Yield Strength : min. 460Tensile Strength (N/mm²) : 530-650Impact Strength (ISO-V/-60°C) : min. 47 JElongation (%) : min. 24
18 of 73
Brand GEKA
LASER B 43 LOW HYDROGEN ELECTRODE
Description
Laser B 43 is a Low Hydrogen Electrode
Standards :
TS EN ISO 2560-A : E 38 4 B 42 H5EN ISO 2560-A : E 38 4 B 42 H5AWS A5.1 : E 7016 - 1 H4
Chemical Composition of Weld Metal- %(Typical) :
C 0.08Si 0.5Mn 0.7
Mechanical Properties :
Yield Strength : min. 400Tensile Strength (N/mm²) : 490-600Impact Strength (ISO-V/-50°C) : min. 47 JElongation (%) : min. 24
GEKA WELDING CONSUMABLES
Description
GEKA Welding Consumables are manufactured by GEDIK WELDINGwhich was established in Turkey in 1963 and today is a global industryleader in the field of welding consumables and equipment. GEKA wasunder internationally registered trademarks and has been manufacturesabout 90,000 tons/year of superior quality coated weldingelectrodes,brazing rods, special repair and maintenance products,as wellas gas-shielded arc, submerged arc and flux-cored welding wires.
GEDIK WELDING is one of the largest manufacturers in Europe andexports its products to more than 80 countries around the world.
GEDIK WELDING able and willing to serve all industrial sectors, is fullyprepared to explore alternative solutions in order to satisfy its customers.The company is therefore able to supply customized welding products andinnovative engineering solutions, tailor-made to respond to the diverseneeds of its clientele.
Continuous efforts are also undertaken to expand and improve its widerange of multi sector products and services, relying on its own in-houseknow-how and technology. The company's R&D efforts are managed byexpert teams at its modern laboratory facilities in Istanbul, where cutting-edge, durable, relevant and economical solutions and products areconstantly being generated.
GEDIK WELDING also contributes to the advancement of welding scienceand technology via R&D projects carried out in collaboration withISTANBUL GEDIK UNIVERSITY. Further, the non-profit organisation,Gedik Educational Foundation (GEV),conducts various internationally-recognised welding education, training and certified programmes.
19 of 73
Brand DEWALT
DWE8200S 4"GRINDER
Description
DWE8200S 4"grinder has 850 watts of powerful motor with 64% increaseof operating capacity.Slim and compact design provides comfortable handling.High PowerSmall Angle Grinder.Cut-off brushes to prolong motor life.Operates at 12,000 rpm.The metalgear case dissipates heat.Sliding switch is convenient.
Specifications :
Power Input : 850WMax Disc Diameter : 100mmNo Load Speed : 12,000rpmSpindle Thread : M10Weight : 1.75kgs
Brand DEWALT
DWD024K 13MM IMPACT DRILL
Description
Dewalt DWD024 13MM Hammer Drill 650W with 10pcs DrillBits
Features :- Low weight ensures the drill is easy to use and it reducesuser fatigue- Compact design enables comfortable use and allowsaccess to tight spaces- An excellent power to size ratio results in a powerful;durable drill in a compact size- Trigger sensitive variable speed switch allows a user todrill slowly for precision accuracy when starting to drill a hole- Rubber back handle increase comfort to the user indrilling and hammer drilling applications- "Lock on" button gives the user the option to keep themachine continually running when doing repetitive operations
Specifications : - Power Input : 650W- No Load Speed : 0-2800 rpm - Blows per Minute : 0-47,600 bpm - Max. Drilling Capacity : [Wood] 30 mm - Max. Drilling Capacity : [Steel] 13 mm - Max. Drilling Capacity : [Masonry] 16 mm - Spindle Thread : 1/2″ x 20 U.N.F - Weight : 1.8 kg - Length : 255 mm - Height : 180 mm
Items In The Box : - x 1 unit Dewalt DWD024 13mm Drill- x 1 pcs Chuck Key- x 1 pcs Side Handle- x 1 pcs Depth Adjustment Rod- x 1 Manual Book- x 5 pcs Masonry Drill Bit Set- x 5 pcs Wood Drill Bit Set
Warranty Claim Procedure :
20 of 73
*** 3 Years Warranty only entitled for 1 time componentreplacement within warranty period such as : Motor,Armature, Field Coil ****** 1 Year Warranty only entitled for 1 time componentreplacement (1 year from date of purchase) such as :Battery, Charger, Switch, PCB ***
Show Our Company Original Invoice to Us for WarrantyClaim
KINDLY CONTACT US FOR FURTHER INFO :
K.C. INDUSTRIAL TRADING SDN BHDNO 17, GROUND FLOOR, JALAN 2/32,6TH MILES, OFF JALAN KEPONG, 52000, KUALA LUMPUR.
TEL : 03-62513500, 03-62513535, 03-62513555
** The above pictures are for illustration purpose only**
#dewaltdwd024 #dewaltdrill #dewaltdwd024drill13mm#dewaltdrill
Brand DEWALT
DWD014 10MM DRILL
Description
Dewalt DWD014 (3/8”) 10MM Hand Drill 550W
Features :
- Compact design enables comfortable one handed use and allowsaccess to tight spaces
- Variable speed dial switch ensures control to suit different hole sizes indifferent materials
- An excellent power to size ratio results in a powerful, durable drill in acompact size
- Low weight ensures the drill is easy to use and it reduces user fatigue
- Trigger sensitive variable speed switch allows a user to drill slowly forprecision accuracy when starting to drill a hole
- "Lock on" button gives the user the option to keep the machinecontinually running when doing repetitive operations
Applications :
- Metal Drilling
- Wood Drilling
- Plastic Drilling
Specifications :
- Power Input : 550W
- No Load Speed : 0-2800 rpm
- Blows per Minute : 0-47,600 bpm
- Max. Chuck Capacity : 10mm
21 of 73
- Max. Drilling Capacity : [Wood] 25 mm
- Max. Drilling Capacity : [Steel] 10 mm
- Spindle Thread : 1/2″ x 20 U.N.F
- Weight : 1.3 kg
Items In The Box :
- x 1 unit Dewalt DWD014 10mm Drill
- x 1 pcs Manual Book
- x 1 Chuck Key
Warranty Claim Procedure :
*** 3 Years Warranty only entitled for 1 time component replacementwithin warranty period such as : Motor, Armature, Field Coil ***
*** 1 Year Warranty only entitled for 1 time component replacement (1year from date of purchase) such as : Battery, Charger, Switch, PCB ***
***NOT COVER BY WARRANTY Components , such as : Carbon Brush,AC Cord, Handle/Holder, Gear Case (body), Guard, Grease/Lubricant,etc. ***
KINDLY CONTACT US FOR FURTHER INFO :
K.C. INDUSTRIAL TRADING SDN BHD
NO 17, GROUND FLOOR, JALAN 2/32,
6TH MILES, OFF JALAN KEPONG,
52000, KUALA LUMPUR.
(Kindly Shop at our Shopee Website to purchase our products: shopee.com.my/shop/85302551 )
TEL : 03-62513500, 03-62513535, 03-62513555
** The above pictures are for illustration purpose only**
#dewaltdwd014 #dewaltdrill #dewaltdwd014drill10mm #dewaltdrill #drill#drillforwood #drillfor steel #dwdrill
22 of 73
Brand DEWALT
DW862 4"DIAMOND CUTTER
Description
Dewalt DW862 4" Diamond Cutter specifically for for cutting MarbleGranite and other porcelain stone. Targeted application are mainlyfor floor work, can be used with wet kit for wet operation to ensure longerlife of the cutting blade. However, there's no bevel function. Wet/Dry LockON switch.
Specifications :
Power Input : 1,270WNo Load Speed : 13,500Wheel Diameter : 110mmMax Depth of Cut : 34mmWeight : 3kgsCord Length : 2.5m
Brand DEWALT
DW830 5"GRINDER
Description
Dewalt DW830 5"Grinder. provides high speed for fast materialremoval. Adjustable guard can be adjusted to redirect sparks away fromuser. with it's high power-to-weight ratio for greater efficiency and reduceduser fatigue. Built in Sealed ball and roller bearings for extended motorlife.
Specifications :
Power Input : 1,400WMax Disc Diameter : 125mmNo Load Speed : 10,000rpmSpindle Thread : M14Weight : 3.1kgsSpindle Lock : YES
Brand DEWALT
DW810BT 4"GRINDER
Description
Dewalt DW810 4"Grinder has an advanced fan system provides maximumairflow prolonging motor life. With it's sealed toggle switchable to provideprotection from dust and filings extending switch life. Spindle lock for quickand easy disc changes. Additional, tool-free adjustable guard allows easypositioning for left or right handed use and compact gear case allows usein tight and confined areas.
Specifications :
Power Input : 680WMax Disc Diameter : 100mmNo Load Speed : 1,100rpmSpindle Thread : M10Weight : 1.8kgsSpindle Lock : YES
DW304PK RECIPROCATING SAW
23 of 73
Brand DEWALT
Description
Dewalt DW304PK Reciprocating Saw is ideal for plumbers, electricians,heating, HVAC , and builders. It has 4 position blade clamp which allowsfor flush cutting and increased versatility. With a 29mm stroke length,DW304PK delivers excellent cutting performance.
Specifications :
Power Input : 1,050WNo Load Stroke Rate : 0-2,800spmStroke Length : 29mmMax Cutting Capacity for Wood : 280mmMax Cutting Capacity for Steel : 100mmMax Cutting Capacity for PVC : 130mmWeight : 3.5kgs
Brand DEWALT
DCF805C2A 10.8V COMPACT IMPACTDRIVER
Description
Dewalt DCF805C2A Compact Impact Driver is a hexagonal quick couplingprovides comfort. It has 6.35mm ‘drop in‘ keyless hex driver allows forquick and one handed fitment. Reverse option is available and LED lightto lit the areas.
Specifications :
Voltage : 10.8VDriver Size : 6.35mmNo Load Speed : 0-2,450rpmImpacts per Minute : 0-3,400ipmMax Torque : 107NmTotal Length : 158mm
Brand DEWALT
DCD734C2 14.4V COMPACT DRILL DRIVER
Description
Dewalt DCD734C2 14.4V Drill Driver has a 13mm single sleeve chuckand spindle lock for quick and easy bit change with one hand. Two speedsettings, variable speed and reverse switch for maximum control. It alsohas intelligent trigger design allows for total control of application. In totalit has 16 position adjustable torque control for consistent screw drivinginto a variety of materials with different screw sizes. With a bright whiteLED with delay feature for improved visibility and flashlight functionality.
Specifications :
Voltage : 14.4VNo of Speed Settings : 2No Load Speed : 0-400rpm/ 0-1,300rpmMax Torque : 38Nm/ 22NmChuck Capacity : 1.5-13mmChuck Type : Plastic and ratchetingMax Drilling Capacity for Wood : 30mm
24 of 73
Brand DEWALT
DCD700C2 10.8V COMPACT DRILL DRIVER
Description
Dewalt DCD700C2 10.8V Compact Drill Driver has a compact and lightweight design. It able to operate 2 speed settings, variable speed andreverse switch. It also has an electronic motor brake for addedcontrol. With its 15 position torque control, you will be able to screwdriveinto a variety of materials of different screw sizes!
Specifications :
Voltage : 10.8VNo of Speed Setting : 2No Load Speed : 0-400rpm/ 1,500rpmMax Torque : 24NmChuck Capacity : 10mmChuck Type : Plastic Max Drilling Capacity for Wood : 20mmMax Drilling Capacity for Metal : 10mm
Brand DEWALT
D26414 DIGITAL LED HOT AIR GUN
Description
Dewalt D26414 Digital LED Hot Gun is a high quality motor which deliverslonger life. It has a variable temperature that control with LCD displaywhich offers increments of 10°C Set and Forget temperature setting. Itable to auto selects the last temperature selected when switching the uniton use. Thermal protection components prevents overheating for constantheat control.
Specifications :
Power Input : 2,000WOperating Temperature : 50°C-600°CAir Flow : 650 I/minNozzle Diameter : 22mmOverheating Protection : YESWeight : 0.85kgsLength : 265mmHeight : 210mm
Brand DEWALT
D26411 HOT AIR GUN (BASIC)
Description
Dewalt D26411 Hot Air Gun is durable hot air gun for professionalcontinuous operation. It has an excellent temperature control and memorysetting for consistent temperature requirements. With it's light weightergonomics and compact designs for increase comfort and applicationuse.
Specifications :
Power Input : 1,800WOperating Temperature : 50℃-400℃ / 50℃-600℃Air Flow : 250/ 450 I/minNozzle Diameter : 22mmOverheating Protection : YESWeight : 0.8KGsLength : 253mm
25 of 73
Height : 210mm
Brand MAKITA
LW1401 PORTABLE CUTTING MACHINE
Description
Makita LW1401 14" Portable Cutting Machine is a metal-cutting solutionbuilt for light gauge metal stud and strut, pipe, all thread, conduit, tubing,rebar, and more. The 15 AMP motor delivers 3,800 RPM for the mostdemanding metal cutting applications. It is engineered to cut up to 5"round stock, 4-11/16” square tube, and 4” x 7-5/8” or 2-3/4” x 9-1/8”rectangular tubing. It also features fence adjustment up to 45 degreesright or left, and a “tool-less” vice adjustment for increased productivity.The LW1401 weighs only 37 pounds with a locking pin that secures thecutting head in the down position for easy transport and storage.Additional features include a large ergonomic handle and two-stage lock-off power button.
Specifications :
Continuous Rating Input : 2,200WWheel Diameter : 355mmNo Load Speed : 3,800rpmCapacity at 45º (Round) : 127mmCapacity at 45º (Square) : 115m x 103mmCapacity at 45º (Triangular) : 100 x 100 x 10mmNet Weight : 18.3kgsPower Supply Cord : 2.5m
Brand MAKITA
LS1040 10" COMPOUND MITER SAW
Description
Makita LS1040 10" Compound Miter Saw has dual post compoundpivoting arm as miter cuts 0°-45°(left) and 0°-52°(right). Positive miterstops at 9 settings: 15°, 22.5°, 30°, 45°, right or left and 0° (90°cuts).Bevel cuts up to 45° to the left. Makita LS1040 10"Compound MiterSaw is a precision machined aluminum base ensures accurate cuts and itable to performs compound cutting operations. It's shaft lock for easyblade changes.
Specifications :
Continuous Rating Input : 1,650WBlade Diameter : 260mmMiter Angle : 45°L/ 52°RBevel Angle : 45°L/45°RMax Cutting Capacity : 90° (90.5 x 95mm)Max Cutting Capacity : 45° (90.5 x 67mm)No load Speed : 4,600rpmNet Weight : 12.4kgsPower Supply Cord : 2.5m
Brand MAKITA
JR3050T RECIPRO SAW
26 of 73
Description
Makita JR3050T Reciprocating Saw is well-built and well balanced midclass. High cutting efficiency supported by the powerful motor. MakitaJR3050T is ideal for framers, carpenters, electricians,plumbers andgeneral construction. With this Makita JR3050T Reciprocating Saw, it isspecifically designed for dust proofing with air from inside prevent the dustcollected around the slider and ring, rubber seal protect gear room againstdust. Operator can adjust the shoe position by pressing the red button. Ithas tool-less blade change system.
Specifications :
Continuous Rating Input : 1,010WLength of Stroke : 28mmStrokes Per Minutes : 2,800spmCapacity for Pipe : 130mmCapacity for Wood : 255mmOverall Length : 452mmNet Weight : 3.3kgsPower Supply Cord : 2.5m
Brand MAKITA
HR4002 ROTARY HAMMER
Description
Makita HR4002 Rotary Hammer has 2 modes of operation which ishammering with rotation and hammering only. Makita HR4002 RotaryHammer is highly efficient by high speed. When the drill bits hits againstthe reinforcement, the torque limiter operates to stop. Aluminium housingprovides high quality and toughness. It's ergonomically designed handlewith rubberized soft grip provides more control and comfort.One-Touch Sliding Chuck enables easy bit change.
Specifications :
Continuous Rating Input : 1,050WImpact Energy : 6.1JCapacity for Concrete (TCT Bit) : 40mmCapacity for Concrete (Core Bit) : 105mmImpacts Per Minute : 2,500IPMNo Load Speed : 680rpmNet Weight : 6.8kgsPower Supply Cord : 5.0m
Brand MAKITA
HR2810 ROTARY HAMMER
Description
Makita HR2810 Rotary Hammer has a high efficiency in bothdrilling and chipping. It has 3 operation modes (hammering,hammering with rotation and merely rotation). One touch
27 of 73
sliding chuck for easy bit change and ergonomically designedhandle with rubberized soft grip provides more control andcomfort. It has one-touch sliding chuck for easy bit change.
Specifications :
Continuous Rating Input : 800WImpact Energy : 2.9JCapacity for Concrete (TCT Bit) : 28mmCapacity for Steel : 13mmImpacts Per Minute ; 4,500IPMNo Load Speed : 1,100rpmNet Weight : 3.8kgsPower Supply Cord : 2.5m
Brand MAKITA
HR2470 ROTARY HAMMER
Description
Makita HR2470 Rotary Hammer provides efficient and powerfuloperations, courtesy of its high-performance motor. This Makita hammerdrill machine is reliable.Get through all your drilling tasks quickly andefficiently with the powerful Makita HR2470 Rotary Hammer Drill. It isergonomically designed and is super compact that allows for one-handeduse.
Specifications :
Continuous Rating Input : 780WImpact Energy : 2.4JCapacity for Concrete : 24mmCapacity for Core Bit : 54mmCapacity for Steel : 13mmCapacity for Wood : 32mmImpacts Per Minute : 4,500IPMNo Load Speed : 1,100rpmNet Weight : 2.9-3.3kgsPower Supply Cord : 4.0m
Brand MAKITA
HM1201 DEMOLITION HAMMER
Description
Makita HM1201 Demolition Hammer has a powerful impact from durablealuminium body. Anti-vibration spring on rear handle for reduced operatorfatigue. There's automatic brush cut-out when periodic service is due.
Specifications :
Continuous Rating Input : 1,130WImpact Energy : 13JImpact Per Minutes : 2,000IPMOverall Lenght : 480mmNet Weight : 901kgsPower Supply Cord : 5.0m
28 of 73
Brand MAKITA
HM0810 DEMOLITION HAMMER
Description
Makita HM0810 Demolition Hammer is compact and lightweight for maximum control. Makita HM0810 DemolitionHammer has a soft rubber grip side handle and anti-vibrationspring on rear handle for reduced operator fatigue. It is easyto grip round shape barrel protected by rubber cover.
Makita HM0810 Demolition Hammer s ideal for lightchiseling, chipping and scaling operations.
Specifications :
Continuous Rating Input : 900WImpact Energy : 7.2JOverall Length : 428mmNet Weight : 6.3kgsPower Supply Cord : 5.0mm
Brand MAKITA
HG5012 HEAT GUN
Description
Makita HG5012 Heat Gun is a basic heat gun with a convenient 2 stepsswitch controlling temperature and air flow. It can apply on strips paintingand varnish, thaws frozen metal pipes, loosens tile and putty. It's non sliphandle for easy operations.
Specifications :
Continuous Rating Input : 1,600WAir Temperature for High Setting : 500°CAir Temperature for Low Setting : 350°CAir Flow for High Setting : 500L/minAir Flow for Low Setting : 350L/minNet Weight : 0.58kgs
Brand MAKITA
GD0601 DIE GRINDER
Description
Makita GD0601 Die Grinder combines power and speed with motor-protection features for improved grinding performance. The GD0601 isengineered with a powerful AC/DC motor with 25,000 RPM in a slim bodydesign, and a conveniently located slide-switch for on/off function. Thiscombination of power and ease-of-use features makes the GD0601 idealfor a range of grinding tasks.
Specifications :
Continuous Rating Input : 400WCapacity for Collet : 3mm, 6mmWheel Diameter : 38mmNo Load Speed : 25,000rpmNet Weight : 1.68-1.84kgsPower Supply Cord : 2.5m
GA7050 7"GRINDER
29 of 73
Brand MAKITA
Description
Makita GA7050 7"Grinder is consider most compact in class. It has asmall and rotatable gear housing as well as a large trigger switch for easyoperation. Makita GA7050 with it's lightweight design for optimal maneuverability andcontrol Labyrinth construction features a complex series of channels to preventpenetration of dust and debris into the field.
Specifications :
Continuous Rating Input : 2,000WWheel Diameter : 180mmNo Load Speed : 8,500rpmNet Weight : 3.98-5.00kgsPower Supply Cord : 2.5m
Brand MAKITA
GA4030 4" GRINDER
Description
Makita GA4030 4"Grinder has all ball bearing construction for durabilityand longer tool life
Specifications :
Continuous Rating Input : 720W Wheel Diameter : 100mmNo Load Speed : 11,000rpmNet Weight : 1.73-2.02kgsPower Supply Cord : 2.5m
Brand MAKITA
FS2500 SCREW DRIVER
Description
Makita FS2500 Screw Driver has the variable speed trigger withforward/reverse switch as well as one touch locator allows for easy locatorinstallation/removal.
Specifications :
Continuous Rating Input : 570WCapacity for Drywall Screw :5mmCapacity for Self-Drilling Screw : 6mmDriving Shank (Hex) : 6.35mmNo Load Speed : 2,500rpmNet Weight : 1.6kgsPower Supply Cord : 2.5m
30 of 73
Brand MAKITA
9237C 7" POLISHER
Description
Makita 9237C Polisher specifically designed for high-quality detailing &polishing. With this Makita 9237C Polisher presents a consistent powerand speed control with new durability and performance features. Wherebythe outcomes is very fast and powerful polisher clear coat finishes, stonepolishing and more. Detailers will appreciate the variable speed dial and trigger so they canmatch the speed to the application, and the constant speed control isengineered to maintain consistent speed even under load. The 9237C hasa rubberized loop handle that provides added comfort for users and addedprotection for delicate work surfaces. For increased durability, the Polisherhas a wire mesh intake cover to prevent wool bonnet fibers and otherdebris from entering the motor.
Specifications :
Continuous Rating Input : 1,200WCapacity for Wool Pad : 180mmCapacity for Wool Bonnet : 180mmNet Weight : 3.4kgsPower Supply Cord : 2.5m
Brand MAKITA
9215SB DISC SANDER
Description
Makita 9215SB Disc Sander consists a powerful motor in well-balancedbody for fast and steady sanding.
Specifications :
Continuous Rating Input : 570WWire Cup Brush : 110mmAbrasive Disc Size : 150mmNo Load Speed : 4,500rpmOverall Length : 225mmNet Weight : 2.9kgsPower Supply Cord : 2.5m
Brand MAKITA
6413 DRILL
Description
Makita 6413 Drill has a rubberized and comfort grip. Makita 6413 has a chuck capacity of 1.5-10mm . It has an in-line designbrings drilling pressure in line with center of drill bit axis as well as ballbearing construction ensures high durability.
Specifications :
Capacity on Steel : 10mmCapacity on Wood : 25mmInput : 450WNo Load Speed : 3,400rpmOverall Length : 228mmNet Weight : 1.3kgsPower Supply Cord : 2m
31 of 73
Brand MAKITA
6412 DRILL
Description
Makita 6413 Drill has a rubberized and comfort grip. Makita 6413 has a chuck capacity of 1.5-10mm . It has an in-line designbrings drilling pressure in line with center of drill bit axis as well as ballbearing construction ensures high durability.
Specifications :
Capacity on Steel : 10mmCapacity on Wood : 25mmInput : 450WNo Load Speed : 3,000rpmOverall Length : 228mmNet Weight : 1.2kgsPower Supply Cord : 2m
**Comes with chuck key**
Brand MAKITA
N5900B 9"CIRCULAR SAW
Description
Makita N5900B 9"Circular Saw is the most respected saw on the marketfor the last 30 years and has been upgraded with as high as 2,000W ofmotor to run this machine. It is fit as a real work horse whereby designedto use it daily which is a perfect companion for the builders. It has anexcellent saw for ripping and crosscut which apply from ply to hardwood.
Specifications :
Continuous Rating Input : 2,000WMax Cutting Capacity for 90° : 85mmMax Cutting Capacity for 45° : 60mmMax Cutting Capacity for 50° : 53mmBlade Diameter : 235mmNo Load Speed : 4,100rpmOverall Length : 380mmNet Weight : 6.8kgsPower Supply Cord : 2.5m
Brand MAKITA
5806B 7"CIRCULAR SAW
Description
Makita 5806B 7"Circular Saw has a powerful motor for smooth operationseven in heavy duty cutting .
Specifications :
Continuous Rating Input : 1,050WBlade Diameter : 185mmMax Cutting Capacity for 90° : 66mm Max Cutting Capacity for 45° : 44mmNo Load Speed : 5,200rpmOverall Length : 282mmNet Weight : 3.5kgsPower Supply Cord : 2.5m
32 of 73
Brand MAKITA
4300BV JIG SAW
Description
Makita 4300BV Jig Saw is a proven great performer that bringsconvenient to the user. Makita 4300BV Jig Saw is a robust tool and astrength to cut through a wide range of materials.
Specifications :
Continuous Rating Input : 390WCapacity for Wood : 55mm Capacity for Steel : 6mmLength of Stroke : 26mmStrokes per Minute : 0-3,100spmOverall Length : 225mmNet Weight : 2.5kgsPower Supply Cord : 2.5m
Brand MILWAUKEE.
TKSE 2500Q 1/4" SCREWDRIVER SELFDRILLING SCREWS
Description
Milwaukee TKSE 2500Q 1/4" Screwdriver Self Drilling Screws consist ofmetal gearbox for exact seating of bearings and gearsMilwaukee TKSE 2500Q 1/4" Screwdriver Self Drilling Screws has a Quietsnap-action clutchMilwaukee TKSE 2500Q 1/4" Screwdriver Self Drilling Screws isvery easy to remove "snap-on" depth setting noseIt has a soft grip
Specifications :
Max Static Stalling Torque : 25 NmSelf-trapping/ Wood Screws : 6.5/ 6 mmNo Load Speed : 0-2,500 rpmBit Reception : 1/4“ Power Input : 725 WWeight : 1.4 kgs
Brand MILWAUKEE.
SSD 1100X SAWZALL RECIPROCATINGSAW
Description
Milwaukee SSD 1100X Reciprocating Saw has a high cutting performancedue to powerful 1100 watt motor combined with a 28 mm saw strokeMilwaukee SSD 1100X Reciprocating Saw has FIXTEC blade clamp forfast and easy blade changes without any keyMilwaukee SSD 1100X Reciprocating Saw has water & finger protectionnose for safer work and better rust protectionVariable speed trigger switchDurable long lasting slider crople mechanismSupplied with a SAWZALL™ blade and 4 m cable
Specifications :
33 of 73
Power Input : 1,100 WNo Load Stroke Rate : 0-2,900 spmStroke : 28 mmWeight : 3.2 kgs
Brand MILWAUKEE.
PLH 32X SDS PLUS ROTARY HAMMER
Description
Milwaukee PLH 32X SDS Plus Rotary Hammer is a tough, durablehammer with excellent drilling performance in concrete from the hightorque motor and gears and a 3.8 joule single blow energy.Milwaukee PLH 32X SDS Plus Rotary Hammer consist of 900 watt motorcombined with optimised drilling speed results in unsurpassed drillingperformanceElectronics with accelerator switchGood balance and easy handling from the compact L-shape design withAVS (Anti-Vibration-System) and soft grip handleFast tool changing from the FIXTEC system with keyless chuckHeavy Duty magnesium gear casing for optimum seating of gears for alonger operational life
Specifications :
Blow Energy : 3.8 JNo Load Hammer Action (EPTA) : 0-4,500 bpmNo Load Speed : 0-800rpmMax Drilling Concrete : 32 mmMax Drilling Masonry : 32mmMax Drilling Wood : 40 mmPower Input : 900 WWeight : 3.6 kgs
Brand MILWAUKEE.
M18 FPD FUEL GEN II CORDLESS 2 SPEEDPERCUSSION DRILL
Description
POWERSTATE™ Brushless Motor delivers 135 Nm of Peak Torque andup to 2,000 RPM for Faster Drilling SpeedsREDLINK PLUS™ Intelligence prevents damage to the tool and batterydue to overloading or overheatingREDLITHIUM-ION™ Batteries deliver more work per charge and morework over the life of the battery
Specifications :
Voltage : 18VNo Load Speed Gear 1 : 0-550 rpmNo Load Speed Gear 2 : 0-2,000 rpmChuck Capacity : 13 mmMax Drilling Masonry : 13 mmMax Drilling Steel : 13 mmMax Drilling Wood : 45 mmMax Percussion Rate : 32,000 bpmMax Torque : 135NmWeight with Battery Pack : 2.5 kgs
Brand MILWAUKEE.
M18 CHX-502C ROTARY HAMMER
34 of 73
Description
FUEL™ Technology: Delivers faster than corded speed, corded durability,and all day work on one charge.POWERSTATE™ Brushless Motor: Provides 4.5J of impact energy, 0-1,350 RPM and 0-5,000 BPM.REDLITHIUM-ION™ Battery Packs: Provide all day work on one charge,maximum power and more recharges.REDLINK PLUS™ Intelligence: Integrates full-circle communicationbetween tool, battery and charger to protect from overloading,overheating, and over-discharging.AVS Anti-Vibration System: Minimises vibration for maximum comfort
Specifications :
Voltage : 18VBlow Energy (EPTA) 2.5JMax Drilling Concrete : 26mmMax Drilling Steel : 13mmMax Drilling Wood : 30mmFull Load Hammer Action : 0-4,900bpmWeight with Battery Pack : 3.5kgs
Brand MILWAUKEE.
CHPX-502C M18 FUEL 28MM ROTARYHAMMER
Description
FUEL™ Technology: Delivers faster than corded speed, corded durability,and all day work on one charge.POWERSTATE™ Brushless Motor: Provides 4.5J of impact energy, 0-1,350 RPM and 0-5,000 BPM.REDLITHIUM-ION™ Battery Packs: Provide all day work on one charge,maximum power and more recharges.REDLINK PLUS™ Intelligence: Integrates full-circle communicationbetween tool, battery and charger to protect from overloading,overheating, and over-discharging.AVS Anti-Vibration System: Minimises vibration for maximum comfort
Specifications :
Voltage : 18V Blow Energy (EPTA) : 4.5JMax Drilling Concrete : 28mmMax Drilling Steel : 13mmMax Drilling Wood : 30mmFull Load Hammer Action : 0-5,000 bpmWeight with Battery Pack : 4.3kgs
Brand MILWAUKEE.
HDE13RQD 13MM HIGH TORQUE ROTARYDRILL
Description
Milwaukee HDE 13RQD is a rotary drill that comes with a greatperformance in low speed and high torque applications. It is built withcompact and powerful 825W motor. Reverse operation of the machine isapplicable. It was a user friendly machine by having a 4m Quick-LockCable (detachable) for better allocation.
35 of 73
Milwaukee HDE 13RQD is a low speed machine with max of 500rpm andcomprises of 101Nm of static stalling torque. It is applicable on drillingsteel, aluminium as well as wood. Whereby this machine it able to bringthe conveniences and a great performance for the users especially forheavy duty applications.
Specifications :
Power Input : 825WNo Load Speed : 0-500 rpmStatic Stalling Torque : 101Nm Max Drilling Capacity (Steel/ Aluminium/ Wood) : 13/ 20/ 38 Chuck (keyed) : 1.5-13mmChuck Spindle : 1/2"x 20Gear neck diameter : 46mmWeight : 3.2kgs
Gedik Welding
ANGLE DRILL
36 of 73
GRINDER
AIR HOSE FITTING
37 of 73
Brand ROBIN
UFRL - FILTER, REGULATOR,LUBRICATOR
Description
Size :
UFRL-02UFRL-03UFRL-04
UFRL - FILTER, REGULATOR,LUBRICATOR
Description
Size :
UFRL-02UFRL-03UFRL-04
38 of 73
UFR - FILTER, REGULATOR
Description
Size:
UFR-02UFR-03UFR-04
UF - FILTER
Description
Size:
UF-03UF-04UF-05
SM
Description
20SM30SM40SM
SH
Description
20SH30SH40SH
39 of 73
PH
Description
20PH30PH40PH
PM
Description
20PM30PM40PM
40 of 73
PF
Description
20PF30PF40PF
HOUSE Safety Boots
HSS, SDS, SDS-MAX DRILL BIT
MOIL POINT & CHISEL (SDS, SDS-MAX &DEMOLITION)
41 of 73
Brand SATA
DRILL
KING TOYO
42 of 73
CO2 WELDING TORCH
TIG WELDING TORCH
TADO AUTOMATIC PUMP
Wacker Neuson Compactor
43 of 73
IRWIN TOOLS
309L, 308L, 316L
Description
CLASSIFICATION : ER309L, ER308L, ER316L (STAINLESS STEEL)
SIZE :
1.6MM2.0MM2.4MM
44 of 73
ALTIG 308L-LF
Description
CLASSIFICATION : ER308L ( STAINLESS STEEL)
SIZE :
1.6MM2.0MM2.4MM
ALTIG SG2
Description
CLASSIFICATION : ER70S-G (STEEL)
SIZE :
1.6MM2.0MM2.4MM
TG-S50
Description
CLASSIFICATION : ER70S-G (STEEL)
SIZE :
1.2MM1.6MM2.0MM2.4MM
TGS-316L
Description
CLASSIFICATION : ER316L (STAINLESS STEEL)
SIZE :
1.2MM1.6MM2.0MM2.4MM
45 of 73
TGS-1CM
Description
CLASSIFICATION : ER80S-G (STEEL)
SIZE :
1.2MM1.6MM2.0MM2.4MM
TGS-308L
Description
CLASSIFICATION : ER308L (STAINLESS STEEL)
SIZE:
1.2MM1.6MM2.0MM2.4MM
WELDING FLUX
AS 460
Description
CLASSIFICATION : F7A5-EM12K
SIZE : 25KG / PKT
46 of 73
SOLID MIG WIRES
Description
CLASSIFICATION : ER70S-6 (MILD STEEL)
SIZE : 0.8MM
TIG RODS
MIG WIRES
WELDING ELECTRODES
47 of 73
WELDING CONSUMABLES
FLUX CORE WIRE
Description
CLASSIFICATION : E71-T (MILD STEEL)
SIZE : 1.2MM
48 of 73
LB-52-18
Description
CLASSIFICATION : E7018 (HIGH TENSILE STEEL)
SIZE:
2.6MM3.2MM4.0MM5.0MM
LB-52U
Description
CLASSIFICATION : E7016 (HIGH TENSILE STEEL)
SIZE
2.6MM3.2MM4.0MM5.0MM
LB-52
Description
CLASSIFICATION : E7016 (HIGH TENSILE STEEL)
SIZE:
2.6MM3.2MM4.0MM5.0MM
RB-26
Description
CLASSIFICATION : E6013 (MILD STEEL)
SIZE:
1.6MM2.0MM2.6MM3.2MM4.0MM5.0MM
49 of 73
STAINARC 308L/316L/309L/312
Description
CLASSIFICATION : AWS A5.4 (STAINLESS STEEL)
308L/316L SIZE:
2.0MM2.6MM3.2MM4.0MM
309L/312 SIZE:
2.6MM3.2MM4.0MM
WELDING CONSUMABLES
CASTARC 50/100/150
Description
CLASSIFICATIONS : JIS Z3252 (CAST IRON)
2.6MM3.2MM4.0MM
STABLEARC 18
Description
CLASSIFICATION : E7018 (HIGH TENSILE STEEL)
SIZE:
50 of 73
2.6MM3.2MM4.0MM5.0MM
HARDFACING
Description
CLASSIFICATION : JIS Z3251 (HARD SURFACING)
700R350R
POWERWELD S-12
Description
CLASSIFICATION : E6013 (MILD STEEL)
SIZE:
2.0MM2.6MM3.2MM4.0MM5.0MM
YAMA DIE GRINDER
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
AIR TACKER
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
51 of 73
KUANI IMPACT WRENCH
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
SK WELDING GAUGE
52 of 73
CLP 12000 MAGNETIC PUMP
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
53 of 73
SHOWFOU SUBMERSIBLE PUMP
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
54 of 73
HCP SUBMERSIBLE PUMP
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
MOBILE LIGHT TOWER
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
55 of 73
BENCH / VERTICAL DRILLING MACHINE
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
ELECTRODE QUIVER
ELECTRODE OVEN
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
FLUX OVEN
Description
Cash before delivery within Klang Valley only.
56 of 73
Minimum order RM 500.00 and above.
CONCRETE MIXER
Description
3T MINI MOTOR CONCRETE MIXER
3T MINI ENGINE CONCRETE MIXER
7T DIESEL CONCRETE MIXER
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
PORTABLE VENTILATION FAN
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
57 of 73
FULL BODY HARNESSES
FULL COW-HIDE GLOVES
SEMI LEATHER BLUE JEANS GLOVES
SAFETY VESTS (ZIP TYPE)58 of 73
Brand PROGUARD
COTTON GLOVEES
INDUSTRIAL RUBBER GLOVES
59 of 73
FULL PALM SEMI LEATHER GLOVES
TIG LEATHER GLOVES
HYDRAULIC BOTTLE JACK
SLING BELT
60 of 73
DIAMOND BLADE
DISSOLVING PAPER
PRO OX-100 OXYGEN MONITORING KIT
Brand LPS
GALVANIZE SPRAY
61 of 73
CHEMICAL GLOVES
Description
Chemical, Cotton, MIG, TIG and other Gloves
Brand SAWA
CUTTING & GRINDING DISC
Description
Cash before delivery within Klang Valley only.Minimum order RM 500.00and above.
62 of 73
Brand SHAKO
SHAKO - FILTER REGULATORLUBRICATORS
Brand NITTO
NITTO - CUTTER
Description
NITTO Drill Cutter
Brand SANRITSU
SANRITSU - ELECTRODE HOLDER
Brand HARRIS
HARRIS - CUTTING TORCH
63 of 73
Brand ACE WELD
ACE WELD - CO2 REGULATOR
Brand KINGS
KINGS
64 of 73
Brand HARRIS
HARRIS - REGULATOR
MASK
65 of 73
Brand MASK
Brand NITTO
NITTO-MAGNETIC DRILL
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand NITTO
COUPLINGS SET
66 of 73
Brand BOSTON/UNIGAWA/YOKOWA/YOKO FLEX
UNIGAWA AIR HOSE
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand UNI-ARC
UNI-ARC WELDING CABLE
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand SWAN
SWAN
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
BLACK EAGLE
67 of 73
Brand BLACK EAGLE
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand DAB
DAB
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand B3
B3 SAFETY SHOES
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
68 of 73
Brand 3M
3M
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand PROGUARD
SAFETY VESTS (FLIP TYPE)
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand AUWELD
AUWELD
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand STARWILL
STARWILL
69 of 73
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand KOBELCO
WELDING CONSUMABLES
Brand RILON
RILON
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
70 of 73
Brand SAF
SAF-FRO
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand M10
M10
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
71 of 73
Brand SATA
SATA
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand TOPTUL
TOPTUL
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Brand MAKITA
MAKITA
Description
Cash before delivery within Klang Valley only.
Minimum order RM 500.00 and above.
Tel 03-6251 3555Tel 03-6251 3535Tel 03-6251 3500Fax 03-6251 3688E-Mail sales@kcindustrial.com.myWebsite www.kcindustrial.com.my
K.C. Industrial Trading Sdn. Bhd.
No. 17, Jalan 2/32, 6th Miles, Off Jalan Kepong, 52000, Kuala Lumpur, WilayahPersekutuan, Malaysia
72 of 73
K.C. Industrial Trading Sdn. Bhd.
73 of 73