Post on 01-Jan-2016
description
Construction Plant MaintenanceQuality Network Event
23rd August 2013
Construction Plant MaintenanceQuality Network Event
23rd August 2013
SQA Qualifications: Plant MaintenanceSQA Qualifications: Plant Maintenance
Level 1 SVQ in Plant Maintenance: G7C9-21
Level 2 SVQ in Plant Maintenance: G7CA-22
Level 3 SVQ in Plant Maintenance: G7CC-23
The above qualifications have now lapsed as from 30th June 2013 and have been replaced with a new qualification at Level 2 and Level 3 (Level 1 has been withdrawn). Any candidates currently registered will need to complete by June 2015
T
Lapsed SVQ Qualifications Lapsed SVQ Qualifications
SVQ Level 1 in Plant Maintenance
MANDATORY UNITS
PM 01 Contribute to a Safe Working Environment
PM 02 Carry Out Basic Maintenance on Plant and Equipment
PM 03 Carry Out Bench Fitting Activities
PM 04 Operate Plant Machinery and Equipment (No Load Conditions)
Lapsed SVQ QualificationsLapsed SVQ Qualifications
SQA Level 2 in Plant Maintenance
MANDATORY UNITS
PM 05 Carry Out Servicing and Maintenance of Plant and Equipment
PM 06 Remove and Replace Plant Equipment Components
PM 07 Dismantle and Assemble Plant and Equipment Components
PM 08 Maintain the Work Area
PM 09 Inspect Plant and Equipment for Operational Serviceability
PM 10 Diagnose Faults in Plant Equipment Systems and Components
Lapsed SVQ Qualifications Lapsed SVQ Qualifications
PLUS OPTIONAL UNITS (3 units required from the following 7 units)
PM 11 Repair Plant and Equipment by Soldering and Welding
PM 12 Produce One-off Components to Assist Plant and
Equipment Activities
PM 13 Move Standard Loads
PM 14 Install Plant and Equipment for Operational Activities
PM 15 Carry Out Specific Tests on Plant Equipment
PM 16 Configure Plant and Equipment for Operational Activities
PM 23 Hand Over Plant and Equipment to the Control of Others
Lapsed SVQ QualificationsLapsed SVQ Qualifications
SQA Level 3 in Plant Maintenance
MANDATORY UNITS
PM 17 Service and Maintain the Condition of Plant and Equipment
PM 18 Return Plant and Equipment to Service by Repair and Overhaul
PM 19 Conduct Testing of Plant and Equipment Following Repair
PM 20 Diagnose and Determine the Cause of Faults and Problems in Plant
and Equipment
PM 21 Control the Use of Allocated Resources for Plant Maintenance and
Repair Activities
Lapsed SVQ QualificationsLapsed SVQ Qualifications
PLUS OPTIONAL UNITS (3 units required from the following 9 units)
PM 11 Repair Plant and Equipment by Soldering and Welding
PM 12 Produce One-off Components to Assist Plant and Equipment
Activities
PM 13 Move Standard Loads
PM 14 Install Plant and Equipment for Operational Activities
PM 16 Configure Plant and Equipment for Operational Activities
PM 22 Inspect Plant and Equipment for Serviceability
PM 23 Hand Over Plant and Equipment to the Control of Others
PM 24 Provide Technical Information and Advice to Users of Plant and
Equipment
PM 25 Co-ordinate Plant Maintenance Work Activities
New QualificationsNew Qualifications
Current from June 2013 New titles: SVQ 2 in Construction Plant or Machinery
Maintenance SVQ 3 in Construction Plant or Machinery
Maintenance Level 2 and 3 only No Level 1
New QualificationsNew Qualifications
SVQ 2 in Construction Plant or Machinery Maintenance Mandatory Units
VR641 Conform to general workplace health, safety and welfare
VR642 Conform to productive work practices
VR643 Move, handle or store resources
VR659 Operate plant or machinery for non-operational activities
VR660 Service plant or machinery
VR661 Remove and replace plant or machinery components to restore operational
use
VR662 Dismantle and assemble plant or machinery components to replace worn,
damaged or faulty parts
VR663 Inspect plant or machinery for operational serviceability
VR664 Diagnose faults in plant or machinery systems or components
New QualificationsNew Qualifications
Plus Optional Units (two units from the following required)
VR665 Install, repair or modify construction resources by heating, welding,
brazing, soldering and thermal cutting
VR666 Produce one-off components to restore or maintain the operational
functions of plant or machinery
VR667 Install plant or machinery for operational activities
VR668 Carry out specific tests on plant or machinery to determine operational
serviceability
VR669 Configure plant or machinery for specific operational activities
VR672 Hand over plant or machinery to the control of others
Total of 11 units required
New QualificationsNew Qualifications
SVQ 3 in Construction Plant or Machinery Maintenance
Mandatory Units
VR209 Confirm work activities and resources for the work
VR210 Develop and maintain good working relationships
VR211 Confirm the occupational method of work
VR659 Operate plant or machinery for non-operational activities
VR664 Diagnose faults in plant or machinery systems or components
VR670 Determine and complete service to maintain plant or machinery
VR671 Determine and advise on the viability of repair or replacement for returning
plant or machinery to service
New QualificationsNew Qualifications
Plus Optional Units (one unit from the following required)
VR672 Hand over plant or machinery to the control of others
VR673 Provide technical information, advice and guidance to users of plant or
machinery
Plus Optional Units (two units from the following required)
VR665 Install repair or modify construction resources by heating, welding,
brazing, soldering and thermal cutting
VR666 Produce one-off components to restore or maintain the operational
functions of plant or machinery
VR667 Install plant or machinery for operational activities
VR669 Configure plant or machinery for specific operational activities
Total of 10 units required
Subject Specialist E.Vs.
No reportable External Verification issues found
Developmental and supportive approach to verification.
Identifying and sharing good practice.
Quality Networks.
Partnership
“ Critical Friend”
SQA Approach SQA Approach