Post on 30-Oct-2015
description
Professional Report
ATMINDOJl., K.L. Yos Sudarso No. 100Phone : (62) (61) 6619 133
Medan 20115 - IndonesiaFax : (62) (61) 6615 124
PO BOX 1253E-mail : boiler@atmindo.co.id
PT. ATMINDO
Company Profile
PT. ATMINDO
Company Background
Preface
PT. ATMINDO is active in the design, manufacture, erected and has commissioned more than 200 boilers. PT. ATMINDO has since more than 20 years engineered and manufactured water tube boilers for the palm oil and sugar industry. At the present, more than 250 boilers are operated successfully in Indonesia and in several other countries.
Sizes range from 10 t/h until 50 t/h with life pressure of approximately 20 - 38 bar (g). These boilers are manufactured 100% in PT. ATMINDOs workshop. The workshop is equipped with membrane wall manufacturing equipment.
All boilers are erected, commissioned and lifetime maintained by our own technical crews.
In regards to the manufacture and erection of the boilers, PT. ATMINDO strictly applies International boiler code using only imported materials with accepted inspection certificates for the manufacturing of pressure parts.The company also holds certificates to ISO 9001 and AD 2000 Merkblatt HP0.
Due to the in depth design and manufacturing of our boilers, we can guarantee our customers a highest quality standard and a full technical back up service. All major materials, components and accessories are ready on stock. Experienced boiler engineers and field crews are on permanent stand by to quickly respond to any question or action requested by customers.
We have also active in other market sector for example oil and gas project where we have experienced to build the pressure vessel tank, piping systems etc
Enclosed are our reference lists of boilers manufactured since 1983 for your perusal.
Management Organization Chart PT. ATMINDO
1. LIM CHER WEE-Director
2. LEE CHEE KONG-General Manager
3. TAN KIA MENG-Senior Production Manager4. Ir. DUDDY WANGSAHARDJA-Marketing Representative Jkt.5. JHONSON H. SILALAHI, ST-Technical Manager
6. Ir. DOLI R. MARPAUNG-Service & Parts Manager
7. RUDI SUSANTO, ST-Purchasing8. RAMELAN SITORUS, SE-Finance & Accounting Manager
9. PIETER SIMANJUNTAK-Human Resources Manager10. Ir. HENDRIK A.M. SIRAIT-Quality Assurance Manager11. Asril M-Manufacturing List of Expert/Senior Engineer/EngineerNo.N a m aDisciplineExperience
1.Jhonson Silalahi, STMechanical engineer : boiler design, piping, project management8 years
2.Ir Doly Raja MarpaungMechanical engineer : boiler design, service, repair14 years
3.Asril M.Mechanical engineer : boiler fabrication and construction, material20 years
4.Ir. Hendry SiraitMetallurgy : welding engineer, quality control8 years
5.Ir. SuparlanMechanical engineer : plant engineer, piping, pressure vessel, tools12 years
6.Ir. Tunggul SitorusElectrical engineer : instrument, control, commissioning13 years
7.Ir. Annes TurnipCivil engineer : boiler foundation, structure, road engineer16 years
8.Wilmar Esau Nainggolan, STMechanical engineer : boiler design, piping8 years
9.Ir. Misno UtomoMechanical engineer : boiler design, service, repair10 years
10.Dedi Susanto, STMechanical engineer : boiler design, estimator, specification10 years
11.Irwansyah Nasution, STIndustrial engineer : boiler design, estimator, specification8 years
Board of Commissioners
1. Mr. Fadjar Judisiawan, ST. MM-President Commissioner
Office:Kementrian Badan Usaha Milik Negara
Gedung 16 Lantai Departemen Keuangan Lt.11
Jl. Dr. Wahidin No. 2 - 4
Jakarta Pusat - Indonesia
Phone : (62-21) 34833203
2. Mr. Lai Kim Teng-Commissioner
Office:Sphere Corporation Sdn Bhd.
Lot 1640, Lebuh Raja Lumu
Kawasan Perusahaan PKNS
Pendamaran Industrial Estate, 42000 Port Klang, Selangor Dahrul Ehsan
Malaysia
Phone : (603) 31687177Company Coordinates
Head Office and Workshop :Company Name:P.T. ATMINDOEstablished:1972
Address:Jalan K. L. Yos Sudarso No. 100
Medan 20115
Indonesia
Telephone:(62-61) 6619-133 (Hunting Line)
Fax:(62-61) 6615-124
E-mail:boiler@atmindo.co.id
Contact person
: 1. Service & Parts Ir. Mhd. Doli R. MarpaungPermit
: 1. Surat Keputusan Menteri Perindustrian
No.102/M/AK/III/1971 tanggal 9 Maret 1971
2. Lampiran Surat Keputusan Menteri Perindustrian No.102/M/SK/III/1971
3. Surat Keterangan Direktorat Jenderal Industri, Mesin, Logam Dasar dan Elektronika No.2085/DJ-IMLDE/XI/93 tanggal 13 November 1993
Jakarta Representative Office :
Century Tower 11th Floor, Suite 1107
Jalan H. R. Rasuna Said Kav X-2 No.4
Jakarta Selatan 12950 - Indonesia
Phone/Fax : (62-21) 252-0443
E-mail: atmindojkt@cbn.net.id Contact person : Mr. Ir. Duddy Wangsahardja
Products
Water Tube Boiler - The Solid Fuel Membrane Wall Boiler (SFMW)
In today's global economy, many types of combustible solid wastes are valuable energy resources therefore we are active in developing and designing boiler that allows to burn separately or in conjunction with other fuels. This versatility provides cost-effective options to meet energy requirements. Recycling and reduction of our world's waste stream is not only environmentally necessary, but also makes good business sense. Many industrial processes produce solid wastes of a high heating value, ideally suited for energy recovery.
With many years of experiences, it has helped us to design and develop combustion equipment that is highly efficient, reliable and environmentally friendly by applying the principle of correct biomass combustion. Many types of biomass and combustible solid waste can be profitably used as fuel. These include bark, wood waste, shavings, sawdust and agricultural wastes such as sugar cane residue (bagasse), coffee refuse, sunflower shells and even poultry litter. These wastes produce insignificant levels of acid gas when compared to the fossil fuels they replace and are considers CO2 neutral since the carbon dioxide produced is used in the growth cycle of renewable fuel sources. Furthermore, reduction in volume of these wastes minimizes landfill requirements and related disposal costs.
The boilers main feature is the use of membrane wall and a water-cooled grate either as fixed grate or VibroGrate.
The boiler is a 2-drum design with 3 horizontal passes. The 1st pass comprises a well-defined furnace and a radiation room where the segregation of coarse fly ash takes place. The 2nd and 3rd pass contain the evaporator banks and the superheater, which is protected from heat overload.
An economizer and/or air preheater can be furnished for increase of efficiency up to 90%.
The SFMW (Solid Fuel Membrane Wall) Boiler
VibroGrate
The principle of VibroGrate has been known for more than 50 years and has proven to be the best equipment for biomass combustion. The VibroGrate stoker combines spreader technology with automatic ash removal and water-cooled grates. It can be fired based on combustion conditions regardless to cooling air requirements.
This water-cooling allows auxiliary fuel firing without ash cover protecting the grate. The ability to minimize undergrate air reduces excess air, ensures the most efficient use of overfire air that optimizes emission control and efficiency.
Other benefits of VibroGrate is:
Automatic ash removal allows continuous operation without shutdowns to clean Few moving parts which reduces down time and maintenance costs Ability to minimize undergrate air lowers excess air and allows maximum use of overfire air for emission control and optimum combustion Effective air seals between stationary and moving surfaces allows greater air controlFire Tube Boiler (Package Boiler)
PT. ATMINDO has within the last 10 years engineered, manufactured, commissioned and maintained more than 50 boilers of this type. Sizes range from 1 t/h until 20 t/h with life steam pressure from 6 bar (g) to 20 bar (g).
ATMINDOMAT
Combi Boiler (SFW)
Based on its own market know how as well as technical experience, PT. ATMINDO developed in close corporation with customers a combi boiler with a water tube combustion chamber and a fire tube rear end. Sizes range from 3 t/h to 12 t/h with life steam pressure from 10 to 25 bar (g).
This type of boiler is mainly supplied to smaller plantations and industries, which have access to waste solid fuel.
Pressure Vessels
ATMINDO designs, manufactures, installs and maintains a variety of pressure vessels such as sterilizers, heat exchangers, etc. These are many low-pressure vessels with a diameter up to 3,5 m and length up to 30 m.
Sterilizer
Pressure Vessel Doors
PT. ATMINDO manufactures and installs pressure vessel doors. The main market is at the moment the palm oil industries (sterilizer doors).
General Machinery
Partly as accessories to its own products and partly as a separate product, PT. ATMINDO is active in the design and manufacture of various machineries such as tanks, piping, etc.Key Machines and Equipment
Workshop Membrane wall welding machine
-1 piece Fin tube welding machine- 2pieces
Tube bending machines- 2pieces
CNC tube bending machine- 1piece
Membrane wall bending machine- 1piece
SAW circumferential welding machine- 3pieces
Rotary welding table- 1piece
Flame cutting machine (oxy/fuel)- 1piece
CNC oxygen cutting machine- 1piece
Plasma arc cutting machine- 1piece
Plate shear- 1piece
Horizontal boring and milling machine- 1piece
Vertical boring machine- 1piece
Radial drilling machine- 3pieces
Milling machine- 1 piece
Welding machines TIG-10pieces
Welding machines MIG / flux core- 4 pieces
Welding machines SMAW-32pieces
Heat treat equipment (jackets)- 1set
Band saw- 1piece
Plate bending machine up to 16 mm- 1piece
Plate bending machine up to 30 mm- 1piece
Plate bending machine up to 45 mm- 1piece
Steel grit blasting equipment- 1set
Horizontal lathe machines- 9pieces
Vertical lathe up to diameter 3.300 mm- 1piece
Shaping machine- 4pieces
Dishing machine- 2piece
Flanging machine- 1piece
Universal steel worker- 1piece
Hydraulic press (500 ton) - 1pieceKey Machines and Equipment
Site
Welding machine TIG- 5pieces
Welding machine SMAW-45pieces
Welding genset SMAW- 2pieces
Generating set 50 Kva- 8pieces
Generating set 100 Kva- 5pieces
Tube expander- 7set
SFB Radio-11unit
Transformer 24 v-33unit
Disk cutter 16-20unit
Hoists 10 ton-30unit
Hoists 5 ton-30unit
Hoists 3 ton-11unit
Oxygen cutter-24unit
Grinding disk 7-38unit
Grinding disk 4-24unit
Electric drilling machine-25unit
Magnetic drilling machine- 5unit
Erection & Comm.
Service senters
Manufacturing
Asril M
Quality Assurance
Hendry A.M.S.
Service & Part
Doli R.M.
Technical
Jhonson H.S.
Marketing
Duddy W.
Investment
Human Resources
Pieter S.
Finance
Ramelan S.
Purchasing
Rudi Susanto
Senior Production Manager
Tan Kia Meng
General Manager
Lee Chee Kong
Director
Lim Cher Wee
22
_1147594783.bin