Post on 08-Mar-2019
CFIP PhoeniX CMicrowave solution for broadcast applications
�� Ideal for Studio to Transmitter / Transmitter to Studio, Intercity Relay and ENG backhaul where both ASI and IP connectivity is essential�� Supports mixed ASI, IP & E1 traffic, user - configurable, supporting future migration over to all IP�� Available in full duplex (ASI, IP and E1) and Simplex (ASI Only) configurations�� Available in 1+1 Hot-Standby fully protected and Space Diversity configurations with Adaptive Hitless Modulation�� System throughput of up to 360 Mbps per radio with AES encryption�� Modular platform, future-proof design with flexible network configurations, up to 16 native ASI interfaces with low latency and low jitter�� Phoenix C platform can be configured for all indoor or split mount indoor / outdoor applications�� Comprehensive web browser control and monitoring with error logging and alarm notifications
LUMPh-C
Max Tx Power of CFIP PhoeniX series radios
ModulationStandard / High / Very High Tx Power, dBm
4, U4 GHz L6, U6 GHz 7 GHz 8GHz 10, 11, 15 GHz 13 GHz 18, 23, 26 GHz 38 GHz
4QAM +33 +19/+27/+33 +19/+27/+32 +19/+27/+31 +19/+25 +19/+25/+29 +19 +17
16QAM +32 +18/+26/+32 +18/+26/+31 +18/+26/+31 +18/+24 +18/+24/+28 +18 +16
32QAM +31 +17/+25/+31 +17/+25/+30 +17/+25/+30 +17/+23 +17/+23/+27 +17 +15
64QAM +29 +15/+23/+29 +15/+23/+28 +15/+23/+28 +15/+21 +15/+21/+25 +15 +13
128QAM +29 +15/+23/+29 +15/+23/+28 +15/+23/+28 +15/+21 +15/+21/+25 +15 +13
256QAM +26 +12/+20/+26 +12/+20/+25 +12/+20/+25 +12/+18 +12/+18/+22 +12 +10
Solution for fully protected and duplex link
Channel filters
Antenna
Ethernet switch Management traffic4 ASI ports
ETSI
Frequency Bands 4/6/7/8/10/11/13/15/18/23/26/32/38/42 GHz
Channel Bandwidths 7, 14, 28, 40, 56 MHz
Modulation 4QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM with hitless ACM
Capacity up to 362 Mbps
Configurations 1+0, 1+1 (HSB, SD, FD), 2+0 link bonding
Synchronization SyncE, 1588v2
Encryption AES 256bit
Traffic/Management ports 3x 10/1000Base-T, RJ-45 – for traffic and/or managment access, 2x SFP (1000BseSX/LX) – for traffic, also work as Extension/Protection ports/Aggregation ports,
USB B – separate serial IP management access, N-Type Female – for connection to ODU
Management MIB, SNMP v1/v2c /v3, Web GUI (HTTP/HTTPS), Telnet, FTP, SSH, Serial interface (USB IP port) , in-band or out-band management
Ethernet switch Managed Gigabit Ethernet Layer 2
QoS IPv4 TOS/DSCP, 802.1p mapped in 4 prioritization queues with VLAN support, IPv6 Traffic Class
VLAN support 802.1Q (up to 4K VLAN entries)
IDU Operational use ETSI EN 300 019, Part 1-3, Class 3.2
Max. power consumption for IDU: <22 W (full port connection) for CFIP ODU: SP 13-27W, HP 21-39W ; VHP 39-55 W
CFIP PhoeniX ODU CFIP PhoeniX IRFU
Ports
Antenna N-Type or flange A) N-Type or flange; B) SMA Tx and Rx ports
IF to IDU N-Type SMA
RSSI BNC 2-port or multi-meter
Power --- (over IF port) 2-pin power port (alternative to IF port)
Mechanical & Electrical
Temperature range -33°C to +55°C -33°C to +55°C
Dimensions: HxWxD / weight 288 x 288 x 80mm / 3.5kg 19” 2U rack 90x430x260 / 5.8 kg
Optional modulesCFIP PhoeniX-C IDU
External ASI module for CFIP PhoeniX-C IDU, 4x BNC, 2x SFP ports
CFIP PhoeniX ODU (outdoor unit)
CFIP PhoeniX IRFU (indoor unit with built-in duplexer)
CFIP PhoeniX IRFU (indoor unit for external filters)
16E1/T1 external module for CFIP PhoeniX-C IDU, 16x RJ-45, 2x SFP ports
25
For more detailed information about SAF products visit our website www.saftehnika.com or contact your SAF representative.Product features may vary between different models, configuration and all data are subject to change without prior notice.
SAF Tehnika © 2016