CFIP PhoeniX CMicrowave solution for broadcast applications

�� Ideal for Studio to Transmitter / Transmitter to Studio, Intercity Relay and ENG backhaul where both ASI and IP connectivity is essential�� Supports mixed ASI, IP & E1 traffic, user - configurable, supporting future migration over to all IP�� Available in full duplex (ASI, IP and E1) and Simplex (ASI Only) configurations�� Available in 1+1 Hot-Standby fully protected and Space Diversity configurations with Adaptive Hitless Modulation�� System throughput of up to 360 Mbps per radio with AES encryption�� Modular platform, future-proof design with flexible network configurations, up to 16 native ASI interfaces with low latency and low jitter�� Phoenix C platform can be configured for all indoor or split mount indoor / outdoor applications�� Comprehensive web browser control and monitoring with error logging and alarm notifications

LUMPh-C

Max Tx Power of CFIP PhoeniX series radios

ModulationStandard / High / Very High Tx Power, dBm

4, U4 GHz L6, U6 GHz 7 GHz 8GHz 10, 11, 15 GHz 13 GHz 18, 23, 26 GHz 38 GHz

4QAM +33 +19/+27/+33 +19/+27/+32 +19/+27/+31 +19/+25 +19/+25/+29 +19 +17

16QAM +32 +18/+26/+32 +18/+26/+31 +18/+26/+31 +18/+24 +18/+24/+28 +18 +16

32QAM +31 +17/+25/+31 +17/+25/+30 +17/+25/+30 +17/+23 +17/+23/+27 +17 +15

64QAM +29 +15/+23/+29 +15/+23/+28 +15/+23/+28 +15/+21 +15/+21/+25 +15 +13

128QAM +29 +15/+23/+29 +15/+23/+28 +15/+23/+28 +15/+21 +15/+21/+25 +15 +13

256QAM +26 +12/+20/+26 +12/+20/+25 +12/+20/+25 +12/+18 +12/+18/+22 +12 +10

Solution for fully protected and duplex link

Channel filters

Antenna

Ethernet switch Management traffic4 ASI ports

ETSI

Frequency Bands 4/6/7/8/10/11/13/15/18/23/26/32/38/42 GHz

Channel Bandwidths 7, 14, 28, 40, 56 MHz

Modulation 4QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM with hitless ACM

Capacity up to 362 Mbps

Configurations 1+0, 1+1 (HSB, SD, FD), 2+0 link bonding

Synchronization SyncE, 1588v2

Encryption AES 256bit

Traffic/Management ports 3x 10/1000Base-T, RJ-45 – for traffic and/or managment access, 2x SFP (1000BseSX/LX) – for traffic, also work as Extension/Protection ports/Aggregation ports,

USB B – separate serial IP management access, N-Type Female – for connection to ODU

Management MIB, SNMP v1/v2c /v3, Web GUI (HTTP/HTTPS), Telnet, FTP, SSH, Serial interface (USB IP port) , in-band or out-band management

Ethernet switch Managed Gigabit Ethernet Layer 2

QoS IPv4 TOS/DSCP, 802.1p mapped in 4 prioritization queues with VLAN support, IPv6 Traffic Class

VLAN support 802.1Q (up to 4K VLAN entries)

IDU Operational use ETSI EN 300 019, Part 1-3, Class 3.2

Max. power consumption for IDU: <22 W (full port connection) for CFIP ODU: SP 13-27W, HP 21-39W ; VHP 39-55 W

CFIP PhoeniX ODU CFIP PhoeniX IRFU

Ports

Antenna N-Type or flange A) N-Type or flange; B) SMA Tx and Rx ports

IF to IDU N-Type SMA

RSSI BNC 2-port or multi-meter

Power --- (over IF port) 2-pin power port (alternative to IF port)

Mechanical & Electrical

Temperature range -33°C to +55°C -33°C to +55°C

Dimensions: HxWxD / weight 288 x 288 x 80mm / 3.5kg 19” 2U rack 90x430x260 / 5.8 kg

Optional modulesCFIP PhoeniX-C IDU

External ASI module for CFIP PhoeniX-C IDU, 4x BNC, 2x SFP ports

CFIP PhoeniX ODU (outdoor unit)

CFIP PhoeniX IRFU (indoor unit with built-in duplexer)

CFIP PhoeniX IRFU (indoor unit for external filters)

16E1/T1 external module for CFIP PhoeniX-C IDU, 16x RJ-45, 2x SFP ports

25

For more detailed information about SAF products visit our website www.saftehnika.com or contact your SAF representative.Product features may vary between different models, configuration and all data are subject to change without prior notice.

SAF Tehnika © 2016