Post on 15-Jul-2020
Cards & Card Hardware
2
Car
ds &
Car
d H
ardw
are
5 Cards & Card Hardware
Cards & Card Hardware
130 131
Car
ds &
Car
d H
ardw
are
Contents
Cards & Card Hardware
Page
132 RFID technology
135 Data acquisition readers / Coding station
136 Card printers
Cards & Card Hardware
132 133
Car
ds &
Car
d H
ardw
are
Card Sets, Card Data Capture Readers, Card Coding Stations and Card Printers
RFID technologyprimion offers an extensive range of credentials with different technologies, in order to be able to implement many different customer and market require-ments.
When it comes to contactless read technologies, there are active and passive transponders. The widely-used passive RFID technology, which is also the one that we deploy, does not require any energy supply but draws the power it needs from the high-frequency signal emitted by a reader device. As oppo-sed to the active transponders therefore, passive transponders do not require any battery.
In order to initialise our readers and also to programme the offline compon-ents for our pkt system, we offer a range of card sets that are detailed in this catalogue.
In addition you will also find details of data capture readers and card coding equipment that we offer.
You will also find details here of third-party card printers that we have tested and released for use with the prime WebSystems software.
Ordering Information Mifare classicKP02-001.01 Project card for initialising Mifare Classic readers
Programming cards for pkt systems with Mifare Classic modules
KP02-002.01 Mifare Classic pkt project card set I Consisting of:- Up to 3 x pkt Programming cards- 1 x pkt Time transfer card- 1 x pkt Transactions transfer card- 1 x pkt Special authorisation transfer card- 1 pkt Automatic permanent release transfer card One card set is included free-of-charge with each project.
KP02-102.01 Mifare Classic pkt project card set- Consisting of up to 3 cards
KP02-103.01 Mifare Classic pkt Time transfer card
KP02-104.01 Mifare Classic pkt Bookings transfer card
KP02-105.01 Mifare Classic pkt Special authorisation transfer card
KP02-106.01 Mifare Classic pkt Automatic permanent release transfer card
Ordering Information KP02-110.01 Mifare Classic pkt project card set II
Consisting of:- 1 x pkt digital cylinder NG Service card - 1 x pkt digital cylinder NG Disassembly card - 1 x pkt digital cylinder NG Battery change cardOne card set is included free-of-charge with each project.
KP02-111.01 Mifare classic Service card
KP02-112.01 Mifare classic Disassembly card
KP02-113.01 Mifare classic Battery change card
Mifare DESFire EV1KP04-001.01 Project card for initialising Mifare DESFire EV1 readers
Programming cards for pkt systems with Mifare DESFire EV1 modules
KP04-002.01 Mifare DESFire EV1 pkt project card set I Consisting of:- Up to 4 x pkt Programming cards- 1 x pkt Time transfer card- 1 x pkt Transactions transfer card- 1 x pkt Special authorisation transfer card- 1 pkt Automatic permanent release transfer cardOne card set is included free-of-charge with each project.
KP04-102.01 Mifare DESFire EV1 pkt Programming card
KP04-103.01 Mifare DESFire EV1 pkt Time transfer card
KP04-104.01 Mifare DESFire EV1 pkt Booking transfer card
KP04-105.01 Mifare DESFire EV1 pkt Special authorisation transfer card
KP04-106.01 Mifare DESFire EV1 pkt Automatic permanent release transfer card
KP04-110.01 Mifare DESFire EV1 pkt project card set II Consisting of: - 1 x pkt Digital cylinder G3 Service card - 1 x pkt Digital cylinder G3 Disassembly card - 1 x pkt Digital cylinder G3 Battery change cardOne card set is included free-of-charge with each project.
KP04-111.01 Mifare DESFire EV1 Service card for pkt Digital cylinder G3
KP04-112.01 Mifare DESFire EV1 Disassembly card for pkt Digital cylinder G3
KP04-113.01 Mifare DESFire EV1 Battery change card for pkt Digital cylinder G3
Cards & Card Hardware
134 135
Car
ds &
Car
d H
ardw
are
Ordering Information LEGIC primeK100-025.66 IAM card LEGIC prime card coding authorisation card
Only required if the cards are not coded by primion
LEGIC advant®
KP01-001.01 Project card for initialising LEGIC advant® readers
LEGIC advant® cards
K100-029.07 IAM card LEGIC advant® card coding authorisation cardOnly required of the cards are not coded by primion
K100-025.09 LEGIC advant® pkt Initialisation card (SAM 63)
Programming cards for pkt systems with LEGIC advant® modules
KP01-002.01 LEGIC advant® pkt project card set I Consisting of:- Up to 4 x pkt Programming cards- 1 x pkt Time transfer card- 1 x pkt Transactions transfer card- 1 x pkt Special authorisation transfer card- 1 pkt Automatic permanent release transfer card One card set is included free-of-charge with each project.
KP01-102.01 LEGIC advant® pkt Programming card Consisting of up to 4 cards
KP01-103.01 LEGIC advant® pkt Time transfer card
KP01-104.01 LEGIC advant® pkt Bookings transfer card
KP01-105.01 LEGIC advant® pkt Special authorisation transfer card
KP01-106.01 LEGIC advant® pkt Automatic permanent release transfer card
KP01-110.01 LEGIC advant® pkt project card set II Consisting of: - 1 x pkt digital cylinder G3 Service card - 1 x pkt digital cylinder G3 Disassembly card- 1 x pkt digital cylinder G3 Battery change cardOne card set is included free-of-charge with each project.
KP01-111.01 LEGIC advant® Service card for pkt Digital cylinder G3
KP01-112.01 LEGIC advant® Disassembly card for pkt Digital cylinder G3
KP01-113.01 LEGIC advant® Battery change card for pkt Digital cylinder G3
Ordering Information sprox data acquisition reader
L364-130.01 - LEGIC advant® for use with prime WebSystems
L364-157.01* - Hitag for use with prime WebSystems
L364-187.01 - Mifare DESFire EV1 for use with prime WebSystems
L365-157.01* - Hitag, USB for use with prime LiteAccess
Coding station
O002-001.01 - For 1 KB / 4 KB Mifare credentials, with USB connection- With customer-specific configuration file- For coding or recoding1 KB or 4 KB Mifare credentials
O002-002.01 - For LEGIC prime and LEGIC advant®, with USB connection- With customer-specific configuration file
Data acquisition readers / Coding station
These devices are designed for gathering data from credentials such as cards or key tags, which is then used to generate new person records or to search for existing records.
The readers, equipped with RFID technology were developed for use in central security offices, or similar locations, as table-top devices. The device can easily be connected 1:1 with a standard PC or laptop through the RS232 interface (L364-XXX.01) for use with prime WebSystems or with a USB connection (L365-157.01) for use with prime LiteAccess.
A credential, e.g. card or key tag is placed on the reading field to capture the data. The data from a large number of credentials can be captured quickly and easily within a very short time, using these data acquisition readers from primion.
Features» Flexible application» Suitable for use with Access Control and Time & Attendance recording systems» Angled work surface for ease of handling (L364-XXX.01)» Available for various card technologies» Serial (RS232) PC connection (L364-XXX.01)» USB connection (L365-157.01)» Compact construction
Read distances can vary depending on environmental and installation conditions.
Data acquisition reader with serial interface
Data acquisition reader with USB interface
Card coding station
Cards & Card Hardware
136 137
Car
ds &
Car
d H
ardw
are
Card Printers
Datacard SD260The Datacard SD 260 sets the standard. It offers outstanding print quality, reliability, easy operation and efficiency in a small footprint. The Datacard SD260 makes desktop ID card printing easier and more economical than ever before.
IDP 680i plusThe IDP 680i plus with RFID-ribbon-technology is a re-transfer card printer which can print without margins in outstanding quality on the front and back of a plastic-card. The print speed counts up to 120 single-sided printed, full-coloured plastic-cards per hour.
The printer is connected to your PC by a USB 2.0 interface or can be integra-ted in your company's network using the integrated Ethernet interface card.
The possibility of printing, encoding and laminating of a plastic-card in one go (by connecting the lamination module LM), make the IDP 680i plus, besides other features, the perfect solution in card printing.
Datacard SD360 DuplexThe new Datacard SD 360 is the successor to the successful Datacard SP 55 Plus. Building on the technical features of the Datacard SD260, the SD360 additionally offers the option of double-sided printing using the integrated Duplex station.
Features» Simple operation for everyone » Awesome print quality» Outstanding speed» Incredible connectivity Ethernet and USB are on-board as standard
Technical DataPrint resolution 300 dpi, edge-to-edge printing
Print technology Direct-to-card dye-sublimation / resin thermal transfer
Double-sided printing SD260 SD360 Duplex
Manual, by reinserting the cardAutomatic
Connections USB + Ethernet network interface
Print speed, colour Approx. 18 seconds / card side
Print speed, b/w Approx. 4.8 seconds / card side
Card type PVC, PVC composite material, ISO 7810, 54 mm x 86 mm
Card thicknesses 0.51 mm to 0.94 mm
Card input hopper capacity Approx. 100 cards (0.76 mm)
Card output hopper capacity Approx. 25 cards (0.76 mm)
Special features Recognises colour ribbons and adjusts machine parameters automatically
Dimensions (W x H x D) 390 mm x 170 mm x 221 mm
Weight 4.6 kg
Scope of delivery USB cable, power cable, Windows printer driver (XP and Vista), English manual
Ordering InformationH03013-0032.01 Datacard printer SD 260 with 100 card Input Hopper
H03013-0033.01 Datacard printer SD 360 duplex with 100 card Input Hopper
AccessoriesH03013-0034.01 Datacard YMCKT colour ribbon SD260 w/ SD360, for 250 cards
H03013-0035.01 Cleaning card set, 1 set = 10 cardsSpecial cleaning cards for SD260 / SD360
Technical DataPrint resolution 300 dpi
Print technology Dye sublimation printing with re-transfer-film
Print speed 1c / 0c 1c / 1c 4c / 0c 4c / 1c 4c / 4c
Approx. 27 sec. / cardApprox. 58 sec. / card Approx. 36 sec. / card Approx. 69 sec. / cardApprox. 76 sec. / card
Card type ISO format 85.60 mm x 53.98 mm in acc. with ISO 7810ff.
Card thicknesses 0.25 mm - 2.0 mm
Chip encoding Can be retrofitted
Card feeder Drawer for approx. 300 cards
Card thicknesses 0.51 mm to 0.94 mm
Card output Approx. 100 cards
Interface USB 2.0 / Ethernet
Power supply 100 VAC - 240 VAC
Dimensions (W x H x D) 381 mm x 343 mm x 347 mm
Weight Approx. 22 kg
Device warranty 24 months
Ordering InformationH03018-0001.01 Re-Transfer card printer IDP 680i plus
H03013-0033.01 Datacard printer SD 360 duplex with 100 card Input Hopper
AccessoriesH03018-0013.01 LM Laminating station for connection to IDP680i Plus
Thermal-transfer laminating method
H03018-0002.01 Legic coding solution II for Re-Transfer card printer IDP 680i Plus
H03018-0010.01 Mifare coding solution II for Re-Transfer card printer IDP 680i Plus
H03018-0003.01 5-Patch colour ribbon for IDP680i / IDP680i plus for printing plastic cards
H03018-0006.01 4-Patch colour ribbon for IDP680i / IDP680i plus for printing plastic cards
H03018-0009.01 4-colour film, including overlay, i-Series with 5 zones, incl. cleaning roller
H03018-0008.01 Cleaning rollers, 5 pieces
H03018-0004.01 Re-Transfer film for IDP i-Series
H03018-0005.01 Cleaning cards for IDP i-Series (set of 10)