Post on 11-Oct-2020
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(m)
HA(mm)
Wt(kg)
20 2,0 620 3225 2,5 730 4030 3,0 840 4735 3,5 950 5440 4,0 1060 6245 4,5 1170 69
Cantilever spread for 1 track (type I)
HA
L
F2Rd F2Rd
F1Rd
92
42
65
2111
Resistance:F1Rd (kN) = 2,5 F2Rd (kN) = 1,6
Note:Upper member marked with hole.
Fasteners:Supplied complete with U-bolts 2191 Other fasteners: Hook bolt to HEB 3253 U-bolt for wooden pole 2192
Associated parts:Clamp for suspension 5311 Cross arm for feeder 2351 o/w Earth rope clamp for cantilever 6216
Drawing number:351.00045
Ordering information:Length 2,5 m, on HEB 1802111.25.18 Cantilever spread for 1 track (type I)
Mast range:Section HEB 160 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
F1Rd
HA
L
880
20°
92
42
65
2112 Cantilever for inclined catenary, long (type II)
Type L(m)
HA(mm)
Wt(kg)
35 3,5 750 6240 4,0 810 7145 4,5 880 7950 5,0 930 8855 5,5 990 9660 6,0 1040 105
Resistance:F1Rd (kN) = 2,5
Fasteners:Supplied complete with U-bolts and long shank bolts. Fasteners to wooden pole: Bracket for termination 3217 Compression clamp 2194
Associated parts:Clamp for suspension within the 880 dimension 5311 Clamp for suspension 5312 Suspension bracket for 1,5 kV or 15 kV 5314 Earth rope clamp for cantilever 6216
Drawing number:353.00002, .00038
Ordering information:Length 4,5 m, on HEB 2202112.45.22 Cantilever for inclined catenary, long (type II)
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(m)
L1(m)
L2(m)
Wt(kg)
50 5,0 3,75 1,25 9855 5,5 3,75 1,75 10660 6,0 3,75 2,25 11465 6,5 3,75 2,75 12170 7,0 3,75 3,25 129
Cantilever for 2 tracks (type III / UNP 65)
F2Rd
F1Rd
F2RdF2Rd
F1Rd
F2Rd
F3RdF3Rd F3Rd
1600
L1
L
L2 1520
65
42
166
2113
Resistance:F1Rd (kN) = 2,5 F2Rd (kN) = 1,6 F3Rd (kN) = 0,6
Fasteners:Supplied complete with U-bolts.
Associated parts:Clamp for suspension 5313 Pull-off arm for cantilever 2141 Drop bracket 2143 Cross arm for feeder 2351 o/w Earth rope clamp for cantilever 6216
Drawing number:353.00164, .00848 - .00850
Ordering information:Length 7,0 m, on HEB 2402113.70.24 Cantilever for 2 tracks (type III / UNP 65)
Mast range:Section HEB 200 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
F2Rd
F1Rd
F2RdF2Rd
F1Rd
F2Rd
F3Rd F3Rd
H
L
100
50
168
2113.1 Cantilever for 2 tracks (type III / UNP 100)
Type L(m)
H(m)
Wt(kg)
50 5,0 1,60 14455 5,5 1,60 15560 6,0 1,60 16765 6,5 1,60 17870 7,0 1,60 19075 7,5 1,60 20180 8,0 1,60 21385 8,5 2,00 22490 9,0 2,00 23695 9,5 2,00 247100 10,0 2,00 259
Mast range:Section HEB 200 - 260
Resistance:F1Rd (kN) = 2,5 F2Rd (kN) = 1,6 F3Rd (kN) = 0,6
Fasteners:Supplied complete with U-bolts.
Associated parts:Clamp for suspension 5313 Drop bracket 2143 Cross arm for feeder 2351 o/w Earth rope clamp for cantilever 6216
Drawing number:353.00208, .00857 - .00859
Ordering information:Length 8,5 m, on HEB 2202113.1.85.22 Cantilever for 2 tracks (type III / UNP 100)
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(m)
H(m)
060 6,0 1,6065 6,5 1,6070 7,0 1,6075 7,5 2,0080 8,0 2,0085 8,5 2,0090 9,0 2,0095 9,5 2,5100 10,0 2,5105 10,5 2,5110 11,0 2,5115 11,5 3,0120 12,0 3,0125 12,5 3,0130 13,0 3,0
Cantilever for 2 tracks (UPE 140)
6000 - 13000
1600
- 30
00410
65
140
2113.2
Fasteners:Supplied complete with U-bolts
Drawing number:353.00541
Ordering information:Length 11,5 m, on HEB 2602113.2.115.26 Cantilever for 2 tracks (UPE 140)
Mast range:Section HEB 240 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
F2Rd
F1Rd
F3Rd
HA
L
L1
H
400-
700
65
42
96
2114 Cantilever for 1 track with pull-off arm (type IV)
Type L(m)
H(m)
HA(mm)
Wt(kg)
46.15 4,6 1,5 1320 9246.20 4,6 2,0 1320 10146.25 4,6 2,5 1320 10851.15 5,1 1,5 1370 10151.20 5,1 2,0 1370 11051.25 5,1 2,5 1370 11755.15 5,5 1,5 1390 10755.20 5,5 2,0 1390 11555.25 5,5 2,5 1390 12262.15 6,2 1,5 1500 11962.20 6,2 2,0 1500 12762.25 6,2 2,5 1500 134
Mast range:Section HEB 160 - 240
Resistance:F1Rd (kN) = 2,5 F2Rd (kN) = 1,6 F3Rd (kN) = 0,6
Fasteners:Supplied complete with U-bolts and long shank bolts. Associated parts for wooden pole: Bracket for termination 3217 Compression clamp 2194
Associated parts:Clamp for suspension 5311 Bracket for steady army Type 65 5413 Cross arm for feeder 2351 o/w Earth rope clamp for pull-off arm 6217
Drawing number:351.00041 - .00043
Ordering information:Length 5,5 m, pull-off arm 2,0 m, on HEB 2402114.55.20.24 Cantilever for 1 track with pull-off arm (type IV)
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(m)
Wt(kg)
07 0,7 1711 1,1 21
Cantilever for inclined catenary, short
F1Rd
L
40/8
8090
45
ø22ø18F2Rd
2117
Resistance:F1Rd (kN) = 1,0 F2Rd (kN) = 4,5
Fasteners:Supplied complete with U-bolts.
Drawing number:352.00002
Ordering information:Length 0,7 m, on HEB 1802117.07.18 Cantilever for inclined catenary, short
Mast range:Section HEB 160 - 200 220 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type H(mm)
Wt(kg)
20 2000 4625 2500 53
Type Cantilever L(m)
Wt(kg)
1.16 lll / UNP 65 1,6 29,71.18 lll / UNP 65 1,8 32,01.20 lll / UNP 65 2,0 34,41.22 lll / UNP 65 2,2 36,81.24 lll / UNP 65 2,4 39,21.26 lll / UNP 65 2,6 41,61.28 lll / UNP 65 2,8 43,91.30 lll / UNP 65 3,0 46,32.16 lll / UNP 100 1,6 29,82.18 lll / UNP 100 1,8 33,32.20 lll / UNP 100 2,0 34,52.22 lll / UNP 100 2,2 36,92.24 lll / UNP 100 2,4 39,32.26 lll / UNP 100 2,6 41,72.28 lll / UNP 100 2,8 44,02.30 lll / UNP 100 3,0 46,4
Pull-off arm for cantilever (type III / UNP 65)
Drop tube for cantilever (type III)
FRd
370-
870
H
1520
96
65
42FRd
L10
0
100
2141
2143
Resistance:FRd (kN) = 0,6
Fasteners:Supplied complete with bolts.
Associated parts:Bracket for steady arm Type 60, 65 5413 Earth rope clamp for cantilever 6216
Drawing number:353.00343
Ordering information:Heigth 2000 mm2141.20 Pull-off arm for cantilever (type III / UNP 65)
Resistance:FRd (kN) = 0,6
Fasteners:Supplied complete with U-bolts.
Associated parts:Bracket for steady arm 5411 o/w
Drawing number:357.00053
Ordering information:Cantilever III / UNP 65, length 2,8 m2143.1.28 Drop tube for cantilever (type III)
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet for tubular cantilever FL 200 / 260
Mast distance
Syst
em h
eigh
t
Stagger Stagger
Fa
Ts
Axis of rotation
System heightMast distance
System heightMast distance
System heightMast distance
System height 2.20, Mast distance 3.50
1.602.80
1.202.80
1.002.50
2152
2153
Mast distance
Syst
em h
eigh
t
Stagger Stagger
Fa
Ts
Axis of rotation
System height 2.20, Mast distance 3.50
2152
2153
5133 o/w
2159
2155
2156
2159
53212154
2157 54515541 o/w
2158
2159 5541 o/w
Insulation without stand-off
2158
2150
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
2150.1
Axis of rotation
System height 2.20, Mast distance 3.50
System heightMast distance
System heightMast distance
System heightMast distance
1.602.80
1.202.80
1.002.50
5133 o/w
2151
2159
2155
2156, 2158
2159
53212154
2157 54515541 o/w
Insulation with stand-off
System sheet for tubular cantilever FL 200 / 260
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Z(mm)
L(m)
1.04 14 0,3801.06 14 0,5801.08 14 0,7801.10 14 0,9801.12 14 1,1802.04 23 0,3802.06 23 0,5802.08 23 0,7802.10 23 0,9802.12 23 1,180
Stand-off bracket moveable for tubular cantilever FL 200 / 260
Mast bracket for tubular cantilever FL 200 / 260
H
M 1
6
L
Z
ø16
60
22
ø16
M 1
6115
2151
2152
Note:When ordering state height H. Height min. 1,0 m Height max. 2,2 m
Fasteners:Supplied complete with U-bolts.
Associated parts:Solid core insulator 5133 o/w
Drawing number:353.00138
Ordering information:Z = 14, length 0,980 m, height 2,0 m, on HEB 2202151.1.10.20.22 Stand-off bracket moveable for tubular cantilever FL 200 / 260
Fasteners:Supplied complete with U-bolts.
Associated parts:Rod insulator 5133 o/w
Drawing number:353.00180, .00895
Ordering information:on HEB 2002152.20 Mast bracket for tubular cantilever FL 200 / 260
Mast range:Section HEB 200 - 260
Material:Al-cast
Mast range:Section HEB 100 - 160 180 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
115 75
ø165
4
Z
M 1
6
L
300
22
Ø16
115 75
Z
54
Ø16
15002153.3.1
2153.3.2
R
2153
2153.3
Mast bracket for tubular cantilever FL 200 / 260
Pair of cross arms for 2 tubular cantilevers FL 200 / 260
Type Z(mm)
1 142 22
Type Z(mm)
1 142 22
Material:Al-cast
Mast range:Section HEB 100 - 160 180 - 260
Fasteners:Supplied complete with U-bolt.
Associated parts:Rod insulator 5133 o/w
Drawing number:353.00181, .00772 - .00774
Ordering information:Z 14 mm, on HEB 2402153.1.24 Mast bracket for tubular cantilever FL 200 / 260
Mast range:Section HEB 160 180 - 260
Note:L = left as seen from the track R = right as seen from the track
Fasteners:Supplied complete with U-bolts
Associated parts:Rod insulator 5133 o/w
Drawing number:451.00211
Ordering information:Z 22 mm, Right, on HEB 2402153.3.2.R.24 Pair of cross arms for 2 tubular cantilevers FL 200 / 260
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Material D(mm)
Wt(kg)
Insulator
1.1 Fe stainless 70 4,9 5133-34, 5136, 5138-391.2 Fe stainless 70 4,9 51352.1 Fe hot dip galv 70 4,9 5133-34, 5136, 5138-392.2 Fe hot dip galv 70 4,9 51353.1 Al 80 4,4 5133-34, 5136, 5138-393.2 Al 80 4,4 5135
Type Material D(mm)
Wt(kg)
Insulator
1 Fe stainless 70 4,9 5133-34, 5136, 5138-391.2 Fe stainless 70 4,9 51352 Fe hot dip galv 70 4,9 5133-34, 5136, 5138-392.2 Fe hot dip galv 70 4,9 51353.1 Al 80 4,4 5133-34, 5136, 5138-393.2 Al 80 4,4 5135
Top tube for tubular cantilever FL 200 / 260
Strut tube for tubular cantilever FL 200 / 260
L
øD
M 16
13
ø17
30
50
øD
M 16
30
L
50
2154
2155
Note:Length L min. 2,0 m Length L max. 3,5 m Available in steps of 0,3 m Other tube lengths available on request. x.2 = Supplied without screw M 16 for insulator
Associated parts:Bracket with clevis 2159 Rotatable support 5322 o/w
Drawing number:353.00103, 353.00746 - .00750
Ordering information:Cantilever top tube Fe stainless, for insulator 5133, length 2,9 m2154.1.1.29 Top tube for tubular cantilever FL 200 / 260
Note:Length L min. 2,0 m Length L max. 3,2 m Available in steps of 0,1 m Other tube lengths available on request. x.2 = Supplied without screw M 16 for insulator
Associated parts:Clevis clamp 2159
Drawing number:353.00104, .00754 - .00758
Ordering information:Strut tube Fe stainless, for insulator 5135, length 2,6 m2155.1.2.26 Strut tube for tubular cantilever FL 200 / 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
13
L
17
øD
L
17
13
øD
2156
2157
Cantilever brace tube for tubular cantilever FL 200 / 260
Steady arm tube for tubular cantilever FL 200 / 260
Type Material D(mm)
Wt(kg)
1 Fe stainless 38 2,62 Fe hot dip galv 38 2,33 Al 50 1,6
Type Material D(mm)
Wt(kg)
1 Fe stainless 38 2,62 Fe hot dip galv 38 2,33 Al 50 1,6
Note:Length L min. 0,3 m Length L max. 2,4 m Available in steps of 0,1 m Other tube lengths available on request.
Drawing number:353.00105, .00775, .00776
Ordering information:Brace tube Fe stainless, length 1,2 m2156.1.12 Cantilever brace tube for tubular cantilever FL 200 / 260
Note:Length L min. 0,8 m Length L max. 4,2 m Available in steps of 0,2 m Other tube lengths available on request.
Associated parts:Clevis clamp 2159 Drop bracket 5451
Drawing number:353.00106, .00777, .00778
Ordering information:Steady arm tube Fe stainless, length 3,4 m2157.1.34 Steady arm tube for tubular cantilever FL 200 / 260
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Pull-off rope for tubular cantilever FL 200 / 260
Clevis clamp for tube ø 30 - 80 mm for tubular cantilever FL 200 / 260
Clamp with flag for tube ø 30 - 80 mm for tubular cantilever FL 200 / 260
L
14
ø16
14
ø16
50 - 80 mm
30 - 50 mm
1117
30 - 50 mm
50 - 80 mm
1117
2158
2159
2159.1
Note:Length L min. 0,3 m Length L max. 2,4 m Available in steps of 0,1 m Other rope lengths available on request.
Drawing number:353.00161
Ordering information:Length 0,50 m2158.05 pull of rope for tubular cantilever FL 200 / 260
Note:State tube diameter when ordering. Standard diameters: 38, 48, 55, 60, 70 and 76 mm. Other diameters on request.
Drawing number:353.00107, .00108
Ordering information:for tube ø 38 mm2159.38 Clevis clamp for tube ø 30 - 80 mm for tubular cantilever FL 200 / 260
Note:State tube diameter when ordering. Standard diameters: 38, 48, 55, 60, 70 and 76 mm. Other diameters on request.
Drawing number:353.00347, .00348
Ordering information:for tube ø 38 mm2159.1.38 Clevis clamp for tube ø 30 - 80 mm for tubular cantilever FL 200 / 260
Material:Rope: Fe stainless Crimp connector: Cu
Material:G-AlSiMg
Material:G-AlSiMg
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet for fully insulated tubular cantilever
Stagger
cw
cc
Mast distance
Stagger
Syst
em h
eigh
t
2163
21612164 2166 2166
2165 5581 o/w
Cantilever on tangient track and inside of curve
Cantilever on tangient track and outside of curve
2160
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
2160.1
Mast distance
Stagger
cw
Mast distance
Stagger
cw
2162
2165
2161
2166
2162
2161
2167
2167
Cantilever on tangient track with stitch-wire suspension
Cantilever on inside of curve with stitch-wire suspension
System sheet for fully insulated tubular cantilever
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Model
1 with hinge2 with double hinge
Mast bracket with hinge for fully insulated tubular cantilever
Termination bracket for fully insulated tubular cantilever
75
5x3011
20
ø18
118
22
ø24
2161.1
2161.2
2161
2162
Associated parts:Cantilever tube 2163 Support tube 2164
Drawing number:522.00133, .00135 - .00137, .00139, .00144
Ordering information:with hinge, on HEB 2002161.1.20 Mast bracket with hinge for fully insulated tubular cantilever
Associated parts:Universal hook 3344
Drawing number:522.00086, .00142, .00143
Ordering information:on HEB 1802162.18 Termination bracket for fully insulated tubular cantilever
Material:Bracket Fe hot dip galv Fittings CuSn
Mast range:Section HEB 160 180 - 240 260
Mast range:Section HEB 160 180 - 240 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
ø3
8ø16
20
L
20
L
50
ø55
t = 18
2163
2164
Cantilever top tube, synthetic for fully insulated tubular cantilever
Strut tube, synthetic for fully insulated tubular cantilever
Material:Tube GF-EP Fittings CuAl
Weight:Wt (kg/m) = 1,4 (without fittings)
Note:State length L when ordering. Max. length in stock 7,0 m.
Associated parts:Strut tube 2164
Ordering information:Length 2,45 m2163.245 Cantilever top tube, synthetic for fully insulated tubular cantilever
Material:Tube GF-EP Fittings CuAl
Weight:Wt (kg/m) = 2,4 (without fittings)
Note:Clamp range 50-150 mm2 State length L when ordering. Max. length in stock 8,0 m.
Associated parts:Steady arm tube 2165 Kevlar cable 4451
Ordering information:Length 3,25 m2164.325 Strut tube, synthetic for fully insulated tubular cantilever
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type D(mm)
Length in stock(m)
38 38 7,055 55 8,0
Type Model D(mm)
H(mm)
1.38 with eye 38 451.55 with eye 55 602.38 with hook 38 402.55 with hook 55 503.55 groove type 55 87
Steady arm tube, synthetic for fully insulated tubular cantilever
Tube clamp drop suspension for fully insulated tubular cantilever
øD
25
ø16
55
H HH
6
t = 4.5
t = 10
2166.1. 2166.2.
2166.3.
øD
L
2165
2166
Note:State length L when ordering.
Associated parts:Eye clamp 2166 Double tube clamp 2167 Drop bracket 5452
Ordering information:Tube ø 38 mm, length 3,90 m2165.38.390 Steady arm tube, synthetic for fully insulated tubular cantilever
Note:t = thickness
Associated parts:Type 1 Shackle 3357 Steady arm 5583 Type 2 Turnbuckle 2169 Shackle 3357 Type 3 Contact wire swivel clip, groove type 5557
Drawing number:356.00096 - .00099
Ordering information:with eye, on tube ø 38 mm2166.1.38 Tube clamp drop suspension for fully insulated tubular cantilever
Material:Tube GF-EP Fittings CuAl
Material:CuAl
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
A
M 10
O
17 10
95
12
140
55
34
28
13
13 12
ø50
12
ø22
33
17
180 - 250
10
26
2167
2168
2169
Double tube clamp for fully insulated tubular cantilever
Pulley suspension for fully insulated tubular cantilever
Turnbuckle M 8 for fully insulated tubular cantilever
Type Model
1 with suspension clip, with eye
2 with suspension clip, without eye
3 without suspension clip, with eye
4 without suspension clip, without eye
Material:CuAl
Note:For double tube cantilever over 2 tracks. A = Suspension clip O = Eye
Associated parts:Shackle 3357 o/w Pulley suspension 2168
Ordering information:with suspension clip, with eye2167.1 Double tube clamp for fully insulated tubular cantilever
Material:Clevis CuAl Pulley Polyamid
Associated parts:Shackle 3357
Ordering information:2168 Pulley suspension for fully insulated tubular cantilever
Material:Fe stainless
Associated parts:Shackle 3357 o/w
Ordering information:2169 Turnbuckle M 8 for fully insulated tubular cantilever
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet for Liracos
Mast distance
Syste
m he
ight
Stagger Stagger
cw
Ts
Axis of rotation
Axis of rotation
System heightMast distance
System heightMast distance
System heightMast distance
System height 1.60, Mast distance 3.50
System height 1.60, System height 3.50
1.602.80
1.202.80
1.002.50
2171,2172
2173.1 5324
5584
2178
2159.1
54532175
2174
2171,2172
2177
2177
System heightMast distance
System heightMast distance
System heightMast distance
1.602.80
1.202.80
1.002.50
Cantilever on tangient track and inside of curve Cantilever on tangient track and outside of curve
Cantilever with pull-off on cable Cantilever with head- and pull-off cable
System height 1.60, Mast distance 3.50
System height 1.60, System height 3.50
2170
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
2170.1
Mast distance
cwAxis of rotation
Axis of rotation
2171,2172
5584
2177
2159.1
54532173.1
2171,2172
cw
Stagger
Mast distance
Stagger
2173.2
2159.1
Axis of rotationcw
Mast distance
Stagger5584
2177
5453
2159.1
2173.1
Cantilever for one track
Cantilever for one track
2166
Cantilever for two tracks
System sheet for Liracos
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Description
1 with eye fitting2 without eye fitting
Type Description FRd(kN)
1 1 threaded bolt 33 3 threaded bolts 15
Pole range(mm)
d(mm)
180 180 - 260260 260 - 300300 300 - 440
Mast bracket on HEB for Liracos
Mast bracket on round pole for Liracos
30 53
ø18
ø17
12
2171.1
2171.2
ø19
1217
5343
FRd
2171
2172
Fasteners:Supplied complete with U-bolts.
Associated parts:Top tube 2173 Strut tube 2174 Pull-off registration 2177
Drawing number:356.00045, .00120 - .00124
Ordering information:with eye fitting, on HEB 2002171.1.20 Mast bracket on HEB for Liracos
Associated parts:Top tube 2173 Strut tube 2174 Pull-off registration 2177
Drawing number:356.00046, .00125 - .00129
Ordering information:1 threaded bolt, on tubular mast ø 180 mm2172.1.180 Mast bracket on round pole for Liracos
Material:Bracket Fe stainless Eye fitting Al-cast
Mast range:Section HEB 100 - 160 180 - 220 240 - 260
Material:Bracket Fe stainless Eye fitting Al-cast
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
Tube D(mm)
Wt(kg)
38 38 1,555 55 2,6
ø16
L
øD
16
ø16
L
øD
16
2173.1.
2173.2.
øD
14
ø16
L140 20 17
L
t = 12
2173
2174
Top tube for Liracos
Strut tube for Liracos
Type Fittings
1 Clevis type on one end2 Clevis type on both ends
Type D(mm)
L1(mm)
Wt(kg)
55 55 105 2,670 70 110 3,9
Material:Tube GFK Fittings Alu-cast
Note:Length L max. 4,20 m Available in steps of 0,10 m. Other tube lengths available on request.
Associated parts:Tube clamp 2166.3. Rotable support 5324
Drawing number:356.00034, .00035, .00055, .00068, .00069, .00072
Ordering information:Type 1, tube ø 38 mm, length 2,20 m2173.1.38.220 Top tube for Liracos
Material:Tube GFK Fittings Alu-cast
Note:Length L max. 4,20 m Available in steps of 0,10 m. Other tube lengths available on request.
Associated parts:Pull-off registration 2177 Steady arm tube cable 2178
Drawing number:356.00038, .00039
Ordering information:Tube ø 55 mm, length 3,00 m2174.55.300 Strut tube for Liracos
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Steady arm tube for Liracos
Pull-off registration for Liracos
L
17
ø14
FRd
ø38
22
L
2175
2177
Weight:Wt (kg) = 1,5
Note:Length L min. 1,00 m Length L max. 5,25 m Available in steps of 0,25 m. Other tube lengths available on request.
Associated parts:Drop bracket 5453
Drawing number:356.00036, .00037
Ordering information:Length 2,50 m2175.250 Steady arm tube for Liracos
Resistance:FRd (kN) = 13
Note:Length L min. 0,30 m Length L max. 3,40 m Available in steps of 0,05 m. Other cable lengths available on request.
Drawing number:356.00048
Ordering information:Length 1,45 m2177.145 Pull-off registration for Liracos
Material:Tube GFK Fittings Al-cast
Material:Cable Kevlar Fittings Al
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
L
45
18
62/1
0
2178
2179
Steady arm tube suspension cable for Liracos
Adapter for Liracos top tube on stand off brackets for steady arm
Material:Cable Kevlar Fittings Al
Note:Length L min. 0,50 m Length L max. 2,40 m Available in steps of 0,10 m.
Drawing number:356.00049
Ordering information:Length 1,50 m2178.150 Steady arm tube suspension cable for Liracos
Note:Adaptor for fitting the top tube 2173 to bracket 5431
Drawing number:356.00071
Ordering information:2179 Adaptor for Liracos top tube on stand off brackets for steady arm
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet tubular cantilever, simple
21812182
2186
21812182
2185
2159
55655566
2187
21812182
21812182
2186
2186
2159 2159
55655566
21872187
Tubular cantilever over one track with delta suspension
Tubular cantilever over two tracks with delta suspension
2185
55655566
4291 o/w
4291 o/w 4291 o/w
2196
2180
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
2180.1
Tubular cantilever over one track with drop bracket for steady arm
Tubular cantilever over two tracks with drop bracket for steady arm
21812182
2186
21812182
21855455
5584
2159
5552 o/w5565
2187
21812182
21812182
2186
2186
2159 2159
5584 55845455 54552185
5552 o/w 5552 o/w5565
21875565
2187
System sheet tubular cantilever, simple
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet tubular cantilever, simple
21812182
2186
21812182
2185
2159
21812182
21812182
2186
2186
2159 2159
Tubular cantilever over one track with flat laying steady arm
Tubular cantilever over two tracks with flat laying steady arm
2185
2187
5571
2187 2187
5571 5571
5552 o/w
5552 o/w 5552 o/w 33573357
3357
2180.2
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
2180.3
Cross span with delta suspension
Cross span with flat laying steady arm
Cross span with contact wire clamp, direct
3231 o/w
43414424 44514451
3231 o/w
21882189
21882189
55655566
55655566
44914491
4291 o/w4291 o/w
2196
2188 o/w
3231 o/w
4341
5571 5571
4424 445144513231 o/w2188
2189218821894491
4491
5552 o/w5552 o/w 3357 33572188 o/w
3231 o/w
43414424 44514451
3231 o/w21882189
21882189
5552 o/w5552 o/w
44914491
2188 o/w
Cross span straight
Cross span Y-Type51713352
3341
System sheet cross span
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Used for
1 for cantilever tube2 for 1 anchor cable3 for 2 anchor cable
Bracket for cantilever tube on mast HEB
30
75ø1
8
ø16
M 1
6
60
ø18
19
2181.1
2181.3
2181.2
t=10
t=12
2181
Fasteners:Supplied complete with U-Bolt.
Associated parts:Cantilever tube 2185 Anchor cable 2186
Drawing number:353.00368, .00386, .00768 - .00771
Ordering information:for cantilever on HEB 2002181.1.20 Bracket for cantilever tube on mast HEB
Material:Bracket Fe stainless Eye fitting Fe galvanized
Mast range:Section HEB 160 180 - 240 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
Pole range(mm)
d(mm)
180 180 - 260260 260 - 300300 300 - 440
30
75ø16
60
ø18
19
2182.1
2182.2
2182.3
t=10
ø18
t=12
2182 Bracket for cantilever tube, on tubular pole
Type Used for
1 for cantilever tube2 for 1 anchor cable3 for 2 anchor cable
Material:Bracket Fe stainless Eye fitting Fe galvanized
Fasteners:Supplied complete with band bracket.
Associated parts:Cantilever tube 2185 Anchor cable 2186
Drawing number:353.00369, .00388, .00389
Ordering information:for 1 anchor cable on tubular pole ø 200 mm2182.2.180 Bracket for cantilever tube, on tubular pole
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Used for
1 for cantilever tube2 for 1 anchor cable3 for 2 anchor cable
Bracket for 2 cantilever tubes, on mast HEB
32 50
75ø1
8
ø18
ø19
ø60
t=10
2183.1
2183.2
2183.3
800
2183
Fasteners:Supplied complete with U-Bolt.
Associated parts:Cantilever tube 2185 Anchor cable 2186
Drawing number:353.00370, .00390, .00391, .00641, .00642, .00644 - .00647
Ordering information:for 1 anchor cable on HEB 2002183.2.20 Bracket for 2 cantilever tubes, on mast HEB
Material:Bracket Fe stainless Eye fitting Fe galvanized
Mast range:Section HEB 160 180 - 240 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
Pole range(mm)
d(mm)
180 180 - 260260 260 - 300300 300 - 440
7532 50
ø18
ø18
ø19
ø60
t=10
800
t=12
2184.1
2184.2
2184.3
2184 Bracket for 2 cantilever tubes, on tubular pole
Type Used for
1 for cantilever tube2 for 1 anchor cable3 for 2 anchor cable
Material:Bracket Fe stainless Eye fitting Fe galvanized
Fasteners:Supplied complete with band bracket.
Associated parts:Cantilever tube 2185 Anchor cable 2186
Drawing number:353.00371, .00392, .00393
Ordering information:for 2 anchor cables on tubular pole ø 200 mm2184.3.180 Bracket for 2 cantilever tubes, on tubular pole
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Cantilever tube with insulator to bracket, 1,5 kV
Insulating anchor cable with turnbuckle
L
70
Ø70
Ø16
FRd
L1 222
L
17
14
18
FRd
2185
2186
Resistance:FRd (kN) = 5
Note:MRd (Nm) on Insulator fastening = 180 Length L min. 2,0 m Length L max. 12,0 m Available in steps of 0,5 m. Other lengths available on request. In case of double insulation (2187) 3 kV.
Associated parts:Insulating anchor cable 2186 Insulated suspension for tube 2187 Bracket for cantilever tube 2181 o/w
Drawing number:353.00365
Ordering information:Length L = 8,5 m2185.085 Cantilever tube with insulator to bracket, 1,5 kV
Resistance:FRd (kN) = 13
Note:Length L min. 1,0 m Length L max. 15,0 m Other cable lengths available on request.
Drawing number:353.00394
Ordering information:Length L = 8,5 m2186.08500 Insulating anchor cable with turnbuckle
Material:Insulation Synthetic material Tube Fe galvanized
Material:Cable Kevlar Fittings Al Turnbuckle Fe galvanized
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
192
240
2187.xx.1
2187.xx.2.1/2187.xx.2.2
240
180
2187.xx.4
210
M16
2187.xx.5
185
24
2187.xx.6
2187.xx.7
255
2187.xx.3
Ø16
68
F2Rd
F1Rd
2187 Insulated suspension for tube ø 55 and ø 70 mm, 3 kV
Type Used for
1 with clamp for stitch wire for cable ø 6 mm
2.1 with pulley for stitch wire for cable ø 6 mm
2.2 with pulley for kevlar rope ø 10 mm
3 with hinged rope clamp4 with contact wire swivel clip, groove
type5 for steady arm tube6 with eyebolt for suspension, delta
cable7 with feeder suspension clamp
Material:Insulation Synthetic material Fittings Fe stainless
Resistance:valid for all types F1Rd (kN) = 2 F2Rd (kN) = 4
Note:When ordering state tube diameter. Standard diameters 55 and 70 mm
Fasteners:Supplied complete with U-Bolts.
Associated parts:Hinged rope clamp 5351 Contact wire swivel clip 5557 Steady arm tube with eye end fitting 5523 Delta cable 5565 o/w Feeder suspension clamp 5353
Drawing number:353.00351 - .00351-7
Ordering information:On tube ø 70 mm, with contact wire swivel clip, groove type 2187.70.4 Insulated suspension for tube ø 55 and 70 mm, 3 kV
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Used for
1 with delta cable clamp for cable ø 6 mm
2.1 with pulley for steel cable ø 6 mm
2.2 with pulley for Kevlar rope ø 10 mm
3 with hinged rope clamp4 with contact wire swivel clip, groove
type5 for steady arm tube6 with eyebolt for suspension, delta
cable7 with feeder uspension clamp
Insulated suspension for cross span, short, 3 kV
197
2188.1
195
2188.2.1/2188.2.2
139
Ø16
2188.4
2188.3
F1Rd
144
24
2188.6
2188.7
169
2188.5
220
F2Rd
150
68
2188
Resistance:valid for all types F1Rd (kN) = 1 F2Rd (kN) = 2
Note:on cross span ø 4,5 - 9 mm / 35 - 50 mm2
Associated parts:Hinged rope clamp 5351 Contact wire swivel clip 5557 Steady arm tube wih eye end fitting 5523 Delta cable 5565o/w Feeder suspension damp 5353
Drawing number:353.00353 - .00353-6, 451.00359
Ordering information:with hinged rope clamp2188.3 Insulated suspension for cross span, short, 3 kV
Material:Insulation Synthetic material Fittings Fe stainless
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
198
2189.1
199
2189.2.1/2198.2.2
214
2189.3
139
Ø16
2189.4
24
144
2189.6
2189.7
170
M16
2189.5
F1Rd
F2Rd
150
68
2189 Insulated suspension for cross span, long, 3 kV
Type Used for
1 with delta cable clamp for cable ø 6 mm
2.1 with pulley for steel cable ø 6 mm
2.2 with pulley for Kevlar rope ø 10 mm
3 with hinged rope clamp4 with contact wire swivel clip, groove
type5 for steady arm tube6 with eyebolt for suspension, delta
cable7 with feeder uspension clamp
Material:Insulation Synthetic material Fittings Fe stainless
Resistance:valid for all types F1Rd (kN) = 1 F2Rd (kN) = 4
Note:on cross span ø 4,5 - 9 mm / 35 - 50 mm2
Associated parts:Hinged rope clamp 5351 Contact wire swivel clip 5557 Steady arm tube with eye end fitting 5523 Delta cable 5565 o/w Feeder suspension damp 5353
Drawing number:353.00352 - .00352-6, 451.00360
Ordering information:with pulley for Kevlar rope ø 10 mm2189.2.2 Insulated suspension for cross span, long, 3 kV
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Used for
1 with delta cable clamp for cable ø 6 mm
2.1 with pulley for steel cable ø 6 mm
2.2 with pulley for Kevlar rope ø 10 mm
3 with hinged rope clamp4 with pin ø 10 mm
Suspension pulley for light rail system
Insulated suspension for kevlar cross span
114
2190.1
8792
3813
2190.2.1/2190.2.2
2190.3
2190.4
15
ø10
24 98
155
2189.2
2190
Drawing number:448.00027
Ordering information:2189.2 Suspension pulley for light rail system
Note:for kevlar cross span ø 10 mm
Associated parts:Hinged rope clamp 5351
Drawing number:353.00397, .00397-2, .00397-3, .00397-5
Ordering information:with pulley for Kevlar rope ø 10 mm2190.2.2 Insulated suspension for Kevlar cross span
Material:Insulation Synthetic material Fittings Fe stainless
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Section(mm)
A(mm)
B(mm)
C(mm)
16 160 170 192 18618 180 191 212 20720 200 211 232 22722 220 232 252 24824 240 253 272 26926 260 274 292 290
Type Pole range(mm)
A(mm)
B(mm)
C(mm)
15 150 - 200 211 138 22718 180 - 200 211 138 22719 190 - 245 253 162 26921 210 - 225 232 160 248
U-bolt for spread cantilever
U-bolt for spread cantilever on wooden pole
Compression clamp for horizontal cantilever on wooden pole
A
B
100
M 1
6
C
B
A
30
M 1
6
C
280
M 16
2191
2192
2194
Drawing number:359.00036
Ordering information:on HEB 2202191.22 U-bolt for spread cantilever
Drawing number:359.00025
Ordering information:on wooden pole ø 175 mm2192.15 U-bolt for spread cantilever on wooden pole
Drawing number:359.00026
Ordering information:2194 Compression clamp for horizontal cantilever on wooden pole
Mast range:Wooden pole ø 150 - 255
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
M 1
61
8
33
0
ø16
LNP 70
578
L18
0
ø 6
578
180
2195
2196
2197
Mast bracket for tubular cantilever
Hinged suspension in cross span
Contact wire support Delta
Type L(mm)
03 30004 40005 50006 600
Mast range:Section HEB 160 - 260
Drawing number:354.00022
Ordering information:on HEB 2202195.22 Mast bracket for tubular cantilever
Material:Rope Fe A2 Fittings Fe A2
Note:Thimble and crimp connector are delivered loose. Other lengths on request.
Drawing number:413.00043-1
Ordering information:Length 600 mm2196.06 Hinged suspension in cross span
Material:Fe A2
Drawing number:413.00043
Ordering information:2197 Contact wire support Delta
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet TTC
1300
21101/2110221103 o/w
1271/1272
21200
21100
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(m)
Wt(kg)
030 3,0 304035 3,5 345040 4,0 386045 4,5 427050 5,0 468055 5,5 509060 6,0 550065 6,5 591070 7,0 632
TTC-Boom
500
L
600
400
480
21101
Note:Dimensioning by F+F
Associated parts:Drop tube 21103 o/w
Drawing number:342.00201
Ordering information:Type 050, length 5,0 m21101.050 TTC-Boom
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
600
360
500
580 3555
L
1016
21102
Type L(m)
Wt(kg)
070 7,0 947075 7,5 1002080 8,0 1057085 8,5 1112090 9,0 1166095 9,5 1221100 10,0 1276105 10,5 1331
TTC-Boom long
Note:Dimensioning by F+F
Associated parts:Drop tube 21103 o/w
Drawing number:342.00300
Ordering information:Type 085, length 8,5 m21102.085 TTC-Boom long
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(mm)
20 200024 240028 2800
Type L(mm)
20 200024 240028 2800
Drop tube on TTC
Double drop tube on TTC
500
120/120
L
305
±200
765765
600
500
120/120
L
305
±200
440
600
21103
21104
Fasteners:Supplied complete with attachment brackets and hook bolts.
Drawing number:523.00788
Ordering information:Type 20, length 2000 mm21103.20 Drop tube on TTC
Fasteners:Supplied complete with attachment brackets and hook bolts.
Drawing number:523.00789
Ordering information:Type 24, length 2400 mm21104.24 Double drop tube on TTC
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
500
120/120
L
305
±200
650440440
600
L
45° ±15°
L
45° ±15°
21105
21106
21107
Triple drop tube on TTC
Ties/Struts for drop tube 120 x 120 on TTC and TTC long
Ties/Struts for double drop tube 120 x 120 on TTC and TTC long
Type L(mm)
20 200024 240028 2800
Fasteners:Supplied complete with attachment brackets and hook bolts.
Drawing number:523.00790
Ordering information:Type 28, length 2800 mm21105.28 Triple drop tube on TTC
Drawing number:372.00588
Ordering information:21106 Ties/Struts for drop tube 120 x 120 on TTC and TTC long
Drawing number:372.00589
Ordering information:21107 Ties/Struts for double drop tube 120 x 120 on TTC and TTC long
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet SIC on drop tube
L
1300
L
1300
ZackZick
21201 5325/53265153.1
214025462/5462.1
5552/55575546
5463
5546
21200
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(mm)
04 40506 62508 815
Hinged stand-off bracket on tube 120 x 120
140/
140
L
330
21201.04
330
140/
140
L
21201.06
330
L 140/
140
21201.08
21201
Drawing number:372.00390, .00393, .00395
Ordering information:Type 04, length 405 mm21201.04 Hinged stand-off bracket on tube 120 x 120
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet SIC on mast
5552/5557
5546
532521301 5153.1 21402
4463
4677
294713
005463
1300
5462/5462.1
21300
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(mm)
13 131019 190024 242531 3125
SIC on mast
L ±200
740
21301.13
L ±375
740
21301.19
L ± 550
740
21301.24
740
L ±55021301.31
140/
140
140/
140
140/
140
140/
140
21301
Drawing number:372.00474, .00476, .00479, .00480
Ordering information:Type 19, mast HEB 20021301.19.20 SIC on mast
Mast range:Section HEB 200 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
1600
1400
(180
0)
1740
MSH 200/200
MSH 150/100
21302
21303
Double SIC on mast
Frame for double SIC
Mast range:Section HEB 200 - 260
Drawing number:329.00029, 372.00474, .00476, .00479, .00480
Ordering information:Mast HEB 24021302.24 Double SIC on mast
Associated parts:For double SIC on Mast 21302
Drawing number:329.00069
Ordering information:21303 Frame for double SIC
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet support with reduced system height, on drop tube 120 x 120
1500 - 2000
1500 - 2000
21201 53255153.1 21402
5552/5557
55465463
21401
54614463
550
950
21400
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(mm)
25 25030 30035 35040 40045 450
Type L(mm)
09 90011 110013 130015 150017 170019 1900
Spacer
Cantilever tube ø 70
L
ø70/
5 ø18
230
L
ø70 ø48
21401
21402
Drawing number:371.00162-3
Ordering information:Length 250 mm21401.25 Spacer
Note:For SIC on mast 21301
Drawing number:371.00293
Ordering information:Length 900 mm21402.09 Cantilever tube ø 70
Material:Fe stainless
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
5411
5315 ff
5111 ff5431 ff 5521 5552 ff
6211
6211 2311 ff
5111 ff6821 ff
5331 ff5341 ff
5111 ff
5331 ff5341 ff
6214621862192252
2221 ff
6219
2251
5531
System sheet gantry beam 2220
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Gantry L(m)
B(mm)
H(mm)
Upper boom angle(mm)
Lower boom angle(mm)
Greatest part length(m)
Wt(kg/m)
60 J 60 8,0 - 16,0 380 400 60 / 6 60 / 6 - 2970 J 70 12,5 - 20,0 400 400 70 / 7 70 / 7 - 3880 J 80 16,0 - 23,5 420 400 80 / 8 80 / 8 14,3 4990 J 90 20,0 - 26,5 440 500 90 / 9 90 / 9 18,8 62100 J 100 20,0 - 29,5 600 600 100 / 10 80 / 8 19,5 73120 J 120 23,0 - 32,0 640 600 120 / 12 100 / 10 20,2 97130 J 130 27,0 - 34,5 660 700 130 / 12 120 / 80 / 10 19,9 114130 / 8 J 130 / 8 32,0 - 37,0 860 800 130 / 12 120 / 80 / 12 14,2 128140 / 9 J 140 / 9 36,0 - 40,0 880 900 140 / 13 120 / 12 17,2 152
Gantry beam with parallel ends, single beam
BB
600
260
400
325
J 60 - 90
J 100 - 130
J 130/8 J 140/9
jsH
L
960
B
2221
Note:Dimensioning by F+F. Beams are supplied ready assembled.
Joint typeJ 80 - J 130 one spliced joints J 130 / 8 - J 140 / 9 two HV joints
Length grading:Available in steps of 0,50 m.
Support:J 60 Upper and lower boom 2244 J 70 - J 90 Upper boom / Lower boom 2244 / 2245 J 100 - J 130 Upper and lower boom 2246 J 130 / 8 - J 140 / 9 according to local conditions
Drawing number:342.00093 - .00099, .00142, .00143
Ordering information:J 90 / Length 22,0 m2221.090.220 Gantry beam with parallel ends, single beam
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
je
J 130/8 J 140/9
J 100 - 130
J 60 - 90
H
js
L
26
04
00
325
B
600
BB
960
2222
Type Gantry L(m)
B(mm)
H(mm)
Upper boom angle(mm)
Lower boom angle(mm)
Greatest part length(m)
Wt(kg/m)
60 J 60 8,0 - 16,0 380 400 60 / 6 60 / 6 - 2970 J 70 12,5 - 20,0 400 400 70 / 7 70 / 7 - 3880 J 80 16,0 - 23,5 420 400 80 / 8 80 / 8 14,3 4990 J 90 20,0 - 26,5 440 500 90 / 9 90 / 9 18,8 62100 J 100 20,0 - 29,5 600 600 100 / 10 80 / 8 19,5 73120 J 120 23,0 - 32,0 640 600 120 / 12 100 / 10 20,2 97130 J 130 27,0 - 34,5 660 700 130 / 12 120 / 80 / 10 19,9 114130 / 8 J 130 / 8 32,0 - 37,0 860 800 130 / 12 120 / 80 / 12 14,2 128140 / 9 J 140 / 9 36,0 - 40,0 880 900 140 / 13 120 / 12 17,2 152
Gantry beam with parallel ends, outside beam
Note:Dimensioning by F+F. Beams are supplied ready assembled.
Joint typeJ 80 - J 130 one spliced joints J 130 / 8 - J 140 / 9 two HV joints
Length grading:Available in steps of 0,50 m.
Support:J 60 Upper and lower boom TAB>2244 J 70 - J 90 Upper boom / Lower boom 2244 / 2245 J 100 - J 130 Upper and lower boom 2246 J 130 / 8 - J 140 / 9 according to local conditions
Drawing number:342.00093 - .00099, .00142, .00143
Ordering information:J 120 / Length 32,0 m2222.120.320 Gantry beam with parallel ends, outside beam
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Gantry L(m)
B(mm)
H(mm)
Upper boom angle(mm)
Lower boom angle(mm)
Greatest part length(m)
Wt(kg/m)
60 J 60 8,0 - 16,0 380 400 60 / 6 60 / 6 - 2970 J 70 12,5 - 20,0 400 400 70 / 7 70 / 7 - 3880 J 80 16,0 - 23,5 420 400 80 / 8 80 / 8 14,3 4990 J 90 20,0 - 26,5 440 500 90 / 9 90 / 9 18,8 62100 J 100 20,0 - 29,5 600 600 100 / 10 80 / 8 19,5 73120 J 120 23,0 - 32,0 640 600 120 / 12 100 / 10 20,2 97130 J 130 27,0 - 34,5 660 700 130 / 12 120 / 80 / 10 19,9 114130 / 8 J 130 / 8 32,0 - 37,0 860 800 130 / 12 120 / 80 / 12 14,2 128140 / 9 J 140 / 9 36,0 - 40,0 880 900 140 / 13 120 / 12 17,2 152
Gantry beam with parallel ends, centre beam
6955
je
J 60 - 90
J 100 - 130
J 130/8 J 140/9
je
js
L
H
260
400
325
960-je
B
600
BB
2223
Note:Dimensioning by F+F. Beams are supplied ready assembled.
Joint typeJ 80 - J 130 one spliced joints J 130 / 8 - J 140 / 9 two HV joints
Length grading:Available in steps of 0,50 m.
Support:J 60 Upper and lower boom 2244 J 70 - J 90 Upper boom / Lower boom 2244 / 2245 J 100 - J 130 Upper and lower boom 2246 J 130 / 8 - J 140 / 9 according to local conditions
Drawing number:342.00093 - .00099, .00142, .00143
Ordering information:J 130 / Length 28,5 m2223.130.285 Gantry beam with parallel ends, centre beam
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Section(mm)
L(m)
Terminations FRd(kN)
Wt(kg/m)
120 120 5,0 - 8,0 1 7,5 28,0140 140 8,5 - 10,0 2 7,5 43,0160 160 10,5 - 12,0 2 7,5 49,0180 180 12,5 - 13,5 3 7,5 56,0200 200 14,0 - 15,0 3 7,5 62,0220 220 15,5 - 16,5 3 7,5 71,0240 240 17,0 - 18,5 3 7,5 79,0
Termination beam for tensile force 7,5 kN, 1-3 terminations
1
2
3
L
FRd
FRd
FRdFRdFRd
FRd
Pro�l UNP
320
min. 250min. 250 js
/14
/13
/12
/14
/13
/12
/14 /1
4
/13
2231
Note:Dimensioning by F+F. 1 = 1 Termination 2 = 2 Terminations 3 = 3 Terminations
Length grading:Available in steps of 0,50 m. Other lengths available on request.
Associated parts:Support 2271 o/w Bracket for termination 3224 o/w Hinged termination bracket 2277 Counterweight wheel 2276
Drawing number:361.00151 - .00157
Ordering information:Section 120 mm, Length 7,5 m2231.120.075 Termination beam for tensile force 7,5 kN, 1-3 terminations
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
1
2
3
L
FRd
FRd
FRdFRdFRd
FRd
Pro�l UNP
320
min. 250min. 250 js
/14
/13
/12
/14
/13
/12
/14 /1
4
/13
2232
Type Section(mm)
L(m)
Terminations FRd(kN)
Wt(kg/m)
120 120 5,0 - 7,5 1 12,0 28,0140 140 8,0 1 12,0 43,0160 160 8,5 2 12,0 49,0180 180 9,0 - 10,5 2 12,0 56,0200 200 11,0 - 12,0 2 12,0 62,0220 220 12,5 - 13,5 3 12,0 71,0240 240 14,0 - 15,0 3 12,0 79,0
Termination beam for tensile force 12 kN, 1-3 terminations
Note:Dimensioning by F+F. 1 = 1 Termination 2 = 2 Terminations 3 = 3 Terminations
Length grading:Available in steps of 0,50 m. Other lengths available on request.
Associated parts:Support 2271 o/w Bracket for termination 3224 o/w Hinged termination bracket 2277 Counterweight wheel 2276
Drawing number:361.00151 - .00157
Ordering information:Section 180 mm, Length 10,0 m2232.180.100 Termination beam for tensile force 12 kN, 1-3 terminations
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Section(mm)
L(m)
Terminations FRd(kN)
Wt(kg/m)
120 120 5,0 - 5,5 1 16,0 28,0140 140 6,0 - 8,0 1 16,0 43,0200 200 8,5 - 10,0 2 16,0 62,0220 220 10,5 - 12,0 2 16,0 71,0240 240 12,5 - 13,0 2 16,0 79,0
Termination beam for tensile force 16 kN, 1-2 terminations
1
2
L
FRd
FRdFRd
Profil UNP
320
min. 250min. 250 js
/13
/12
/13
/12
/13
2233
Note:Dimensioning by F+F. 1 = 1 Termination 2 = 2 Terminations
Length grading:Available in steps of 0,50 m. Other lengths available on request.
Associated parts:Support 2271 o/w Bracket for termination 3224 o/w Hinged termination bracket 2277 Counterweight wheel 2276
Drawing number:361.00151 - .00157
Ordering information:Section 240 mm, Length 12,5 m2233.240.125 Termination beam for tensile force 16 kN, 1-2 terminations
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Double support bracket for gantry beam
Support bracket for gantry beam J 60 - 90 with parallel ends
Support bracket for gantry beam J 70 - 90 with parallel ends
M 20
M 20
380 100
15
0
M 20
M 20
380 100
10
080
80
M 20
L
M
2243
2244
2245
Note:M = M 16 crooted
Fasteners:Supplied complete with long shank bolts.
Drawing number:433.00008
Ordering information:on HEB 2402243.24 Double support bracket for gantry beam
Fasteners:Supplied complete with U-bolts.
Drawing number:433.00074
Ordering information:on HEB 2402244.24 Support bracket for gantry beam J 60 - 90 parallel ends
Fasteners:Supplied complete with U-bolts.
Drawing number:433.00074
Ordering information:on HEB 2002245.20 Support bracket for gantry beam J 70 - 90 with parallel ends
Mast range:Section HEB 160 L = 240 mm 180 L = 260 mm 200 L = 280 mm 220 L = 300 mm 240 L = 320 mm 260 L = 340 mm
Mast range:Section HEB 160 - 260
Mast range:Section HEB 160 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
M 20
M 20
580 100
150
2246 Support bracket for gantry beam J 100 - 130 with parallel ends
Mast range:Section HEB 160 - 260
Fasteners:Supplied complete with U-bolts.
Drawing number:433.00075
Ordering information:on HEB 2402246.24 Support bracket for gantry beam J 100 - 130 with parallel ends
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(mm)
Gantry T(mm)
Wt(kg)
27.1 2700 60 - 90 2115 23427.2 2700 100 - 130 1915 23429.1 2950 60 - 90 2365 26229.2 2950 100 - 130 2165 26232.1 3200 60 - 90 2615 29032.2 3200 100 - 130 2415 29034.1 3450 60 - 90 2865 31834.2 3450 100 - 130 2665 318
Drop bracket for gantry beam
FRd
T
L
2x 100/50
600
100/100
2251
Resistance:FRd (kN) = 7,5
Note:Gantry beam 2221 o/w
Fasteners:Supplied complete with carrying angles and hook bolts.
Associated parts:Mast bracket for steady arm 5411 o/w Earth rope clamp 6219
Drawing number:348.00122 - .00125
Ordering information:Length 3,45 m, on J 1202251.34.2 Drop bracket for gantry beam
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
100/100
FRd
600
2x 100/50
T
L
400
2252
2253
Upright on gantry beam
Rung for upright on gantry
Type L(mm)
Gantry T(mm)
Wt(kg)
27.1 2700 60 - 90 2115 23427.2 2700 100 - 130 1915 23429.1 2950 60 - 90 2365 26229.2 2950 100 - 130 2165 26232.1 3200 60 - 90 2615 29032.2 3200 100 - 130 2415 29034.1 3450 60 - 90 2865 31834.2 3450 100 - 130 2665 31837.1 3700 60 - 90 3115 34637.2 3700 100 - 130 2915 34639.1 3950 60 - 90 3365 37439.2 3950 100 - 130 3165 37442.1 4200 60 - 90 3615 40242.2 4200 100 - 130 3415 40246.1 4600 60 - 90 4015 40246.2 4600 100 - 130 3815 40252.1 5200 60 - 90 4615 51452.2 5200 100 - 130 4415 514
Resistance:FRd (kN) = 7,5
Note:Gantry beam 2221 o/w
Fasteners:Supplied complete with carrying angles and hook bolts.
Associated parts:Cross arm for upright 2253 Cross arm for suspension 2311 o/w Earth rope clamp 6211 Earth rope clamp 6219
Drawing number:348.00102
Ordering information:Length 3,20 m, on J 602252.32.1 Upright on gantry beam
Fasteners:Supplied complete with square U-bolts.
Drawing number:348.00012
Ordering information:2253 Rung for upright on gantry
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(mm)
Gantry T(mm)
Wt(kg)
63.2 6300 100 - 130 6215 272
Type L(mm)
Gantry Wt(kg)
T1(mm)
T2(mm)
34 3450 130/8, 140/9 86,9 2550 265037 3700 130/8, 140/9 90,5 2800 290042 4200 130/8, 140/9 98,7 3300 340046 4600 130/8, 140/9 104,7 3700 380052 5200 130/8, 140/9 114,2 4300 4400
Upright, strong, on gantry
Upright on gantry beam
J130
/8
J140
/9
L
100/100
600
FRd
T1 T2
FRd
630
2x 160/65/6
T L
160
130
2254
2255
Resistance:FRd (kN) = 7,5
Note:Gantry beam 2221 o/w
Fasteners:Supplied complete with carrying angles and hook bolts.
Associated parts:Cross arm for suspension on request
Drawing number:348.00055
Ordering information:L = 6300 mm, on gantry 100 - 1302254.63.2 Upright, strong, on gantry
Resistance:FRd (kN) = 7,5
Note:Gantry beam 2221 o/w
Fasteners:Supplied complete with carrying angles and hook bolts.
Drawing number:348.00121, .00126 - .00129
Ordering information:Length 5200 mm2255.52 Upright on gantry beam
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
J130
/8
J140
/9
L
100/100
600
FRd
T1 T2
2256 Drop bracket for gantry beam
Type L(mm)
Gantry Wt(kg)
T1(mm)
T2(mm)
34 3450 130/8, 140/9 86,9 2550 2650
Resistance:FRd (kN) = 7,5
Note:Gantry beam 2221 o/w
Fasteners:Supplied complete with carrying angles and hook bolts.
Drawing number:348.00121
Ordering information:Length 3450 mm2256.34 Drop bracket for gantry beam
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Gantry
1 60 - 902 100 - 130
Type Gantry
1 60 - 902 100 - 130
Drop tube for 1 tubular cantilever on gantry
Drop tube for 2 tubular cantilevers on gantry
120 / 120
850
T
A
120 / 120
850
T
2261
2262
Note:When ordering state length T.
Fasteners:Supplied complete with attachment brackets and hook bolts.
Associated parts:Mast bracket 2152 Hinged bracket 2153
Drawing number:353.00486
Ordering information:on J 80, length T 3,80 m2261.1.380 Drop tube for 1 tubular cantilever on gantry
Note:When ordering state length T and distance A.
Fasteners:Supplied complete with attachment brackets and hook bolts.
Associated parts:Mast bracket 2152 Hinged bracket 2153 Anchor 2264
Drawing number:353.00488
Ordering information:on J 120, length T 3,80 m distance A 0,90 m2262.2.380.090 Drop tube for 2 tubular cantilevers on gantry
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
T2
T1
120/120 A
T
A
2263
2264
Drop tube for 1 tubular cantilever on termination beam
Anchor for 2 drop tubes on gantry
Type Gantry
1 60 - 902 100 - 130
Support range:Profil UNP 120 - 240
Note:When ordering state length T1, T2 and distance A.
Fasteners:Supplied complete with attachment brackets and U-bolts.
Associated parts:Mast bracket 2152 Hinged bracket 2153
Drawing number:353.00346
Ordering information:for UNP 200, T1 0,40m, T2 2,20 m, A 1,30 m2263.200.040.220.130 Drop tuve for 1 tubular cantilever on termination beam
Note:When ordering state length T and distance A.
Fasteners:Supplied complete with hook bolts and U-bolts.
Associated parts:Supplied complet with hook bolts and U-bolts.
Drawing number:353.00143
Ordering information:for J 90, T 2,00m, A 0,90 m2264.1.200.090 Ancor for 2 drop tubes on gantry
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Drop tube for 1 tunnel support on termination beam
120/120
T
2265
Note:When ordering state length T.
Fasteners:Supplied complete with attachment brackets and U-bolts.
Associated parts:Tunnel support 2422
Drawing number:353.00333
Ordering information:for UNP 200 mm, length T 2,20 m2265.200.220 Drop tube for 1 tunnel support on termination beam
Support range:Profil UNP 120 - 240
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet terminations on termination beam
2282
2274 2276, 2277
2281
4331.215, 4332
2282
2273
4322
4323 o/w
2276, 2277
2271 3224 o/w
2281
2272
4322
4323 o/w
2276, 2277
2274 2276, 2277 2263
2275
4322
4323 o/w
2231 o/w
2150
4441, 3521 4441, 3521
4441, 3521
2282
2265
2422
Conterweight tensioned contact wire and
carrying cable
Counterweight tensioned contact wire,
fixed termination for carrying cable
Counterweight tensioned contact wire and
carrying cable
Counterweight tensioned carrying cable
2270
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Support for termination beam
Support for termination beam with one deviation and one weight guide
555 85
650 L
100
100
L RF
G
610
L RF
G
2271
2272
Note:G = Track axis F = Pulling direction L = left R = right
Fasteners:Supplied complete with U-bolts.
Termination beam:Profil UNP 120-240
Drawing number:523.00099, 523.00616
Ordering information:for UNP 120, on HEB 240, left2271.12.24.L Support for termination beam
Note:Length L min. 3,00 m Length L max. 5,00 m Available in steps of de 0,5 m. G = Track axis F = Pulling direction L = left R = right Counterweight rod 4322 Counterweight 4323 o/w
Fasteners:Supplied complete with U-bolts.
Termination beam:Profil UNP 120-240
Consisting of:Support for termination beam, complete 523.00111 Lower cross arm 523.00193 Tube for weight guide 4374 Spacer 4375
Drawing number:523.00183
Ordering information:for UNP 120, on HEB 240 L = 4,50 m, right2272.12.24.45.R Support for termination beam with one deviation and one weight guide
Mast range:Section HEB 180-260
Mast range:Section HEB 180-260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
650130
870
85
L
100
100
L RF
G
555 100
10
0
L RF
G
2273
2274
Support for termination beam with one deviation and two weight guides
Support for termination beam with one deviation
Mast range:Section HEB 180-260
Note:Length L min. 3,00 m Length L max. 5,00 m Available in steps of de 0,5 m. G = Track axis F = Pulling direction L = left R = right Counterweight rod 4322 Counterweight 4323 o/w
Fasteners:Supplied complete with U-bolts.
Termination beam:Profil UNP 120-240
Consisting of:Support for termination beam, complete 523.00112 Lower cross arm 523.00194 Tube for weight guide 4374 Spacer 4375
Drawing number:523.00692, 00696, .00725 - .00727, .00735 - .00739
Ordering information:for UNP 200, on HEB 260 L = 4,50 m, right2273.20.26.45.R Support for termination beam with one deviation and two weight guides
Mast range:Section HEB 180-260
Note:G = Track axis F = Pulling direction L = left R = right
Fasteners:Supplied complete with U-bolts.
Termination beam:Profil UNP 120-240
Drawing number:523.00113
Ordering information:for UNP 220, on HEB 240, left2274.22.24.L Support for termination beam with one deviation
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Support for termination beam for one weight guides
Conterweight wheel (1:3 ratio) on termination beam
555
650
85 100
L
L RF
G
200
10
0
F
G
L RF
560
2275
2276
Note:Length L min. 3,00 m Length L max. 5,00 m Available in steps of de 0,5 m. G = Track axis F = Pulling direction L = left R = right Counterweight rod 4322 Counterweight 4323 o/w
Fasteners:Supplied complete with U-bolts.
Termination beam:Profil UNP 120-240
Consisting of:Support for termination beam, complete 523.00094 Lower cross arm 523.00193 Tube for weight guide 4374 Spacer 4375
Drawing number:523.00185
Ordering information:for UNP 120, on HEB 240 L = 4,50 m, left2275.12.24.45.L Support for termination beam with one deviation and two weight guides
Note:Supplied complete with equalizing pulley and wedges for counterweight wheel. G = Track axis F = Pulling direction L = left R = right Order the rope separately Steel rope flexible, stainless 4441.009
Fasteners:Supplied complete with U-bolts.
Termination beam:Profil UNP 120-240
Drawing number:523.00116, .00744, .00745
Ordering information:on UNP 140, right2276.14.R Counterweight wheel (1:3 ratio) on termination beam
Mast range:Section HEB 180-260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
150
F
G
L R
100
F
2277 Counterweight tensioning device on termination beam
Note:Supplied complete with pulleys and clevis straps. Order the cable seperately. G = Track axis F = Pulling direction L = left R = right
Fasteners:Supplied complete with U-bolts.
Termination beam:Profil UNP 120-240
Drawing number:523.00117, .00746, .00747
Ordering information:for UNP 120, right2277.12.R Counterweight tensioning device on termination beam
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System sheet Mono Anchor Boom WPE 450
2270122702
1348
2270322711/22712
1346/1347
22722.1
2270422705
128112821283
22722.2
22700
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Support Bracket for Mono Anchor Boom WPE 450
Support Bracket for Mono Anchor Boom WEB 450
ø53
740
450 4503001300
30
710
710
695
ø53
740
430 430350
660
30
22701
22702
Note:With anchor tongue for Mono Anchor Boom WPE 450 22706 on Tubular mast 300 x 500 RHS 1282
Drawing number:334.00118
Ordering information:22701 Support Bracket for Mono Anchor Boom WPE 450
Note:with anchor tongue for Mono Anchor Boom WEB 450 22705 on Rohrmast 300 x 500 WEB 450 1283
Drawing number:334.00138
Ordering information:22702 Support Bracket for Mono Anchor Boom WEB 450
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
min
. 138
0
max
. 210
0
min
. 305
max
. 102
5
9000 - 11000
11500 - 22000
22703
22704
Tensioning equipment fixed on Mono Anchor Boom, onesided
Mono Anchor Boom WPE 450
Type Used for
1 WPE 4502 WEB 450
Drawing number:361.00366 - .00370, .00397 - .00399, .00451 - .00453
Ordering information:Mast distance 10,5 m22704.10500 Mono Anchor Boom WPE 450
Drawing number:523.00772, .00773
Ordering information:WPE 45022703.1 Tensioning equipment fixed on Mono Anchor Boom, onesided
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Mono Anchor Boom WEB 450
22500 - 25500
22705
Drawing number:361.00529 - .00531
Ordering information:Mast distance 24 m21705.24000 Mono Anchor Boom WEB 450
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Used for A(mm)
1 WPE 450 13202 WEB 450 1450
Type Used for A(mm)
1 WPE 450 15202 WEB 450 1650
Bracket on Mono Anchor Boom, onesided
Bracket on Mono Anchor Boom, double sided
200
200
1600
- 22
00
120/120
660
A
200
200
1600
- 22
00
120/120
660
A
22711
22712
Associated parts:Mono Anchor Boom WPE 450 22704 Mono Anchor Boom WEB 450 22705
Drawing number:523.00774, .00778
Ordering information:WPE 45022711.1 Bracket on Mono Anchor Boom, onesided
Associated parts:Mono Anchor Boom WPE 450 22704 Mono Anchor Boom WPE 450 22705
Drawing number:523.00776, .00780
Ordering information:WEB 45022712.2 Bracket on Mono Anchor Boom, double sided
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
System Sheet Tensioning Equipment for Tensorex C+ on Mono Anchor Boom WPE 450 / WEB 450
22722.1
22722.222721
max. 15°
max. 15°
22720
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Used for A(mm)
1 WPE 450 10502 WEB 450 1170
Type Used for Wt(kg)
L(m)
1 for carrying cable 120 - 180 2,1 - 2,72 for contact wire 165 - 230 3,0 - 3,6
Tensioning Equipment on Mono Anchor Boom
Tensorex C+ on tensioning equipment
3028
1380
-210
026
067
5
A
410
ø219
max. 15°
max. 15°
435
Typ 1
Typ 2
22721
22722
Drawing number:523.00547, .00555, .00558, .00665, .00710, .00713
Ordering information:WPE 45022721.1 Tensioning Equipment on Mono Anchor Boom
Drawing number:523.00612, 525.00039, .00040
Ordering information:for contact wire22722.2 Tensorex C+ on tensioning equipment
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Cross arm for suspension on termination beam
Steady arm bracket on termination beam
Cross arm for feeder on termination beam
780
3 x
40
390
30
17
30/13
970
ø12
12
0
23
2281
2282
2283
Fasteners:Supplied complete with Lindapter.
Termination beam:Profil UNP 120-240
Drawing number:433.00129
Ordering information:on UNP 1202281.12 Cross arm for suspension on termination beam
Fasteners:Supplied complete with Lindapter.
Termination beam:Profil UNP 120-240
Drawing number:442.00065
Ordering information:on UNP 1402282.14 Steady arm bracket on termination beam
Note:Insulator 5151
Fasteners:Supplied complete with U-bolts.
Termination beam:Profil UNP 120-240
Drawing number:451.00177
Ordering information:on UNP 1402283.14 Cross arm for feeder on termination beam
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Gantry Section(mm)
L(mm)
26 260 160-240 31028 280 260 325
Gantry bolt
M 1
6
45
L
2291
Drawing number:396.00003
Ordering information:Strutting 260 mm2291.26 Gantry bolt
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Cross arm for suspension one-sided, straight
Cross arm for suspension one-sided, angled
30°
60°
12
1100
FRd
30°
RHS 100/50
FRd
12
670FRd
RHS 100/50
FRd FRd
30° 30°
2311
2312
Resistance:FRd (kN) = 3,5
Weight:Wt (kg) = 17
Note:Arm can be moved sidewards on back plate.
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00072, .00074, .00264
Ordering information:on HEB 1802311.18 Cross arm for suspension one-sided, straight
Resistance:FRd (kN) = 2,3
Weight:Wt (kg) = 20
Note:Arm can be moved sidewards on back plate.
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00075, .00077, .00162
Ordering information:on HEB 2402312.24 Cross arm for suspension one-sided, angled
Mast range:Section HEB 100 - 140 160 180 - 260
Mast range:Section HEB 100 - 140 160 180 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
50A
L
RHS 100/50
FRd
FRd
30°
FRd
30°
FRd
FRd
30°
30°
FRd
2313 Cross arm for suspension one-sided, straight, for two conductors
Type L(mm)
A(mm)
FRd(kN)
Wt(kg)
18 1800 900 2,0 29,519 1940 1340 2,2 30,7
Mast range:Profile HEB 160 180 - 240 260
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00196, .00267
Ordering information:Length 1940 mm, on HEB 2402313.19.24 Cross arm for suspension one-sided, straight, for two conductors
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(mm)
FRd(kN)
Wt(kg)
13 1340 9,5 18,518 1800 8,0 23,0
Type L(mm)
FRd(kN)
Wt(kg)
13 1340 3,0 21,018 1800 2,3 25,5
Cross arm for suspension two-sided, straight
Cross arm for suspension two-sided, angled
L
RHS 100/50
FRd FRd
FRd
30°
FRdFRd
30°
FRd
30°30°
RHS 100/50
1/4
12
3/4
L
30°
60°
30°FRd
FRd
FRd
FRd
30°
2321
2322
Note:Arm can be moved sidewards on back plate.
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00066, .00068, .00299
Ordering information:Length1340 mm, on HEB 2402321.13.24 Cross arm for suspension two-sided, straight
Note:Arm can be moved sidewards on back plate.
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00070, .00071, .00268
Ordering information:Length 1800 mm, on HEB 2202322.18.22 Cross arm for suspension two-sided, angled
Mast range:Section HEB 100 - 140 160 180 - 260
Mast range:Section HEB 100 - 140 160 180 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Cross arm for pin insulator, one-sided
Cross arm for pin insulator, two-sided
RHS 100/50
FRdFRd
Ø27
1100
FRd
RHS 100/50
Ø27
550
2331
2332
Resistance:FRd (kN) = 3,6
Weight:Wt (kg) = 16
Note:Arm can be moved sidewardsSR>on back plate. Insulator pins 5212 o/w
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00078, .00187, .00329
Ordering information:on HEB 2402331.24 Cross arm for pin insulator, one-sided
Resistance:FRd (kN) = 12
Weight:Wt (kg) = 19,5
Note:Arm can be moved sidewards on back plate. Insulator pins 5212 o/w
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00080, .00188, .00330
Ordering information:on HEB 2202332.22 Cross arm for pin insulator, two-sided
Mast range:Section HEB 100 160 180 - 260
Mast range:Section HEB 100 160 180 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Cross arm for feeder one-sided, on wide-flange mast
Cross arm for feeder two-sided, on wide-flange mast
380
15
ø27
340 340
340
ø27
380
15
2341
2342
Note:Insulator pins 5212 o/w
Fasteners:Supplied complete with U-bolts.
Drawing number:567.00183
Ordering information:on HEB 2202341.22 Cross arm for feeder one-sided, on wide-flange mast
Note:Insulator pins 5212 o/w
Fasteners:Supplied complete with long shank bolts.
Drawing number:567.00184
Ordering information:on HEB 2202342.22 Cross arm for feeder two-sided, on wide-flange mast
Mast range:Section HEB 160 - 200 220 - 260
Mast range:Section HEB 160 - 200 220 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Cantilever L(mm)
L1(mm)
C(mm)
1 2111 530 415 1102 2112 600 408 var3 2113 530 375 1904 2113.1 530 375 1905 2114 530 410 120
Type Cantilever L(mm)
L1(mm)
C(mm)
1 2111 800 740 1102 2112 875 815 var3 2113 800 740 1904 2113.1 800 740 1905 2114 800 740 120
Cross arm for feeder one-sided, on cantilever
Cross arm for feeder two-sided, on cantilever
L1
C
L
M 16
12
ø27
L1
12
ø27C30
L
2351
2352
Note:Insulator pins 5212 o/w When using insulator 5154, order washer ø 17 / 50 x 3 A2 additionally.
Fasteners:Supplied complete with long shank bolts.
Drawing number:567.00187, .00191
Ordering information:on cantilever 2113.12351.4 Cross arm for feeder one-sided, on cantilever
Note:Insulator pins 5212 o/w When using insulator 5154, order washer ø 17 / 50 x 3 A2 additionally.
Fasteners:Supplied complete with long shank bolts.
Drawing number:567.00188, .00194
Ordering information:on cantilever 21142352.5 Cross arm for feeder two-sided, on cantilever
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
ø27
12
30
M 16
L1
C
L
M 16
L1
ø27C
L
12
2353
2354
Cross arm for feeder one-sided, on gantry beam
Cross arm for feeder two-sided, on gantry beam
Type Gantry L(mm)
L1(mm)
C(mm)
1 60 - 90 530 351 2382 100 - 130 720 471 378
Type Gantry L(mm)
L1(mm)
C(mm)
1 60 - 90 800 740 2382 100 - 130 1000 940 378
Note:Insulator pins 5212 o/w When using insulator 5154, order washer ø 17 / 50 x 3 A2 additionally.
Fasteners:Supplied complete with hook bolts.
Drawing number:567.00189, .00189-1
Ordering information:on gantry J 802353.1 Cross arm for feeder one-sided, on gantry beam
Note:Insulator pins 5212 o/w When using insulator 5154, order washer ø 17 / 50 x 3 A2 additionally.
Fasteners:Supplied complete with hook bolts.
Drawing number:567.00190, .00190-1
Ordering information:on gantry J 1202354.2 Cross arm for feeder two-sided, on gantry beam
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Cross arm for cantilever FL 200 / 260
ø7
0
8ø14
45°
575
2355
Note:Retaining clamp 3424
Fasteners:Supplied complete with U-bolts.
Drawing number:567.00154
Ordering information:2355 Cross arm for cantilever FL 200 / 260
Material:Fe stainless
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type Description L(mm)
1.13 - 13401.18 - 18002.13 for post insulator 13402.18 for post insulator 1800
Type Description L(mm)
1.13 - 13401.18 - 18002.13 for post insulator 13402.18 for post insulator 1800
Termination cross arm with 2 fixed termination brackets
Termination cross arm with 4 fixed termination brackets
L
FRd FRd
FRd FRd
L27/4
6ø
18
2361.1
2361.2
FRd FRd
FRdFRd
L
2362.1
FRd FRd
FRdFRd
L
2362.2
27/4
6ø1
8
2361
2362
Resistance:FRd (kN) = 20
Note:Post insulator 5151
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00219, .00220
Ordering information:Length 1340 mm, on HEB 2202361.1.13.22 Termination cross arm with 2 fixed termination brackets
Resistance:FRd (kN) = 20
Note:Post insulator 5151
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00221, .00222
Ordering information:Length 1800 mm, on HEB 2402362.1.18.24 Termination cross arm with 4 fixed termination brackets
Mast range:Section HEB 200 - 260
Mast range:Section HEB 200 - 260
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
FRd FRd
FRdFRd
L
2363.1
FRd FRd
FRdFRd
L
2363.2
27/4
6ø1
82363 Termination cross arm with 2 fixed and 2 adjustable termination brackets
Type Description L(mm)
1.13 - 13401.18 - 18002.13 for post insulator 13402.18 for post insulator 1800
Mast range:Section HEB 200 - 260
Resistance:FRd (kN) = 20
Note:Post insulator 5151
Fasteners:Supplied complete with U-bolts.
Drawing number:451.00223, .00224
Ordering information:Length 1180 mm, on HEB 2602363.1.18.26 Termination cross arm with 2 fixed and 2 adjustable termination brackets
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type H(mm)
L(mm)
65 160 650 - 74975 270 750 - 84990 385 900 - 1099
Elastic contact wire support with FRP rod for 1,5 kV
H
L
2411
Note:Use and fastening according to local conditions.
Drawing number:383.00036
Ordering information:Length 750 mm2411.75 Elastic contact wire support with FRP rod for 1,5 kV
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Tunnel support, 15-25 kV
Tunnel support, 15-25 kV
Tunnel support, 1,5-15 kV
Tunnel support FL200T, 15 kV
2421
2422
2423
2424
Note:Hinged cantilever Catenary system height variable Use and fastening according to local conditions.
Drawing number:371.00203
Note:Hinged cantilever Catenary system height variable Use and fastening according to local conditions.
Drawing number:371.00204
Note:Fixed messenger wire Suspension tube adjustable System height variable Use and fastening according to local conditions.
Drawing number:371.00228
Note:Hinged cantilever Catenary system height variable Use and fastening according to local conditions.
Drawing number:371.00205
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
2425 Tunnel support FL260T, 15 kV
Note:Hinged cantilever Catenary system height variable Use and fastening according to local conditions.
Drawing number:371.00206
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Tunnel support, 15 kV 2431
Note:Hinged cantilever System height variable Use and fastening according to local conditions.
Drawing number:371.00221
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Spring support for single contact wire, 15 kV
Underbridge Arm for Drop Tube ø 101
2441
2442
Note:Synthetic insulator spring support Use and fastening according to local conditions.
Drawing number:372.00076, .00284, .00567
Note:Use and fastening according to local conditions.
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(mm)
04 40006 60008 80010 1000
Type L(mm)
03 30007 70008 80010 100012 120014 140016 160018 1800
Drop tube for tunnel support, inclined plate
Drop tube for tunnel support, straight plate
120/120
L
α = 0-60˚
300/
300
ø24
120/120
L
300/300
ø24
2511
2512
Associated parts:Hinged bracket 2521 o/w
Drawing number:372.00048
Ordering information:Length 800 mm, angle 45°2511.08.45 Drop tube for tunnel support, inclined plate
Associated parts:Hinged bracket 2521 o/w
Drawing number:372.00047
Ordering information:Length 1200 mm2512.12 Drop tube for tunnel support, straight plate
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
L = 150-500
ø25
α = 30-90˚
300/3
00
ø101.6
L15
260
310
300
350
ø23
2513
2514
Support bracket on tunnel wall
Drop Tube ø 101
Type L(mm)
05 50006 60007 70008 80009 90010 100011 110012 120013 130014 140015 1500
Note:Length L min. 150 mm max. 500 mm
Associated parts:Hinged bracket 2523
Drawing number:371.00145
Ordering information:Length 400 mm, angle 35°2513.400.35 Support bracket on tunnel wall
Drawing number:372.00545
Ordering information:Length 1200 mm2514.12 Drop Tube ø 101
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type α(°)
35 35°45 45°
Bracket for hinged tunnel support, straight
Bracket for hinged tunnel support, inclined
Bracket for hinged tunnel support single track
40
0
466
14
0/1
40
ø1
8
45°
140/140
ø18
31
5
α
140/140ø18 315
2521
2522
2523
Fasteners:Supplied complete with U-bolts.
Associated parts:Insulator 5152 o/w
Drawing number:371.00147
Ordering information:2521 Bracket for hinged tunnel support, straight
Fasteners:Supplied complete with U-bolts.
Associated parts:Insulator 5152 o/w
Drawing number:371.00146, .00311
Ordering information:Angle 35°2522.35 Bracket for hinged tunnel support, inclined
Fasteners:Supplied complete with bolts
Associated parts:Insulator 5152 o/w
Drawing number:371.00148
Ordering information:2523 Hinged bracket for tunnel support single track
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Type L(mm)
L1(mm)
α(°)
11.35 1390 1190 35°11.45 1390 1190 45°16.35 1840 1640 35°16.45 1840 1640 45°
Type L(mm)
08 80010 100012 120014 140016 1600
Cantilever tube for tunnel support, angled
Cantilever tube for tunnel support, straight
ø70
L1
L
α
ø7
0
L
2531
2532
Drawing number:371.00143
Ordering information:Length 1840 mm, angle 35°2531.16.35 Cantilever tube for tunnel support, angled
Drawing number:371.00144
Ordering information:Length 1200 mm2532.12 Cantilever tube for tunnel support, straight
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Conductor rail support, lateral
Conductor rail support, hinged
Conductor rail support, hinged, long
2613
2614
2615
Note:Use and attachment in accordance with local conditions. Available for 1,5 kV, 15 kV or 25 kV
Drawing number:962.00832
Note:Use and attachment in accordance with local conditions. Available for 1,5 kV, 15 kV or 25 kV
Drawing number:963.00168
Note:Use and attachment in accordance with local conditions. Available for 1,5 kV, 15 kV or 25 kV
Drawing number:962.02136, .02324
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
1100 - 1600
1100 - 1600
2616
2617
Conductor rail support, lateral
Conductor rail support, lateral
Note:Use and attachment in accordance with local conditions. Available for 1,5 kV, 15 kV or 25 kV
Note:Use and attachment in accordance with local conditions. Available for 1,5 kV, 15 kV or 25 kV
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Conductor rail support 3 kV, with sliding element
Conductor rail support 3 kV, with sliding suspension
2626
2627
Note:Use and attachment in accordance with local conditions.
Drawing number:963.00723
Note:Use and attachment in accordance with local conditions.
Drawing number:963.00898
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
1.5 kV
15 kV
25 kV
150
150
1.5 kV 15 kV 25 kV
220
220
260
260
2628 Conductor rail support with sliding suspension, mounted in centre of the track
Note:Use and fastening with drop tube according to local conditions. Available for 1,5 kV, 15 kV or 25 kV.
Drawing number:963.00534, .00534-1
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Conductor rail support with sliding suspension
Conductor rail support 15 kV, with sliding element
250
250
2° - 9
0°
2628.1
2629
Weight:Wt (kg) = 23,4
Note:Tightening torque M 16 = 190 Nm On tube ø 88,9 mm
Drawing number:962.01552
Note:Use and attachment in accordance with local conditions.
Drawing number:962.00920-4
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Gliding suspension for CR, insulator 25 kV with serration 2631
Note:Use and attachment in accordance with local conditions.
Drawing number:962.02304
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Sprung conductor bar bracket
136 60
140
2644
Weight:G (kg) = 1,11
Drawing number:962.01121
Ordering information:2644 Sprung conductor bar bracket
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Conductor rail support, retractable, motorized
Conductor rail support retractable, slave bracket
2711
2712
Note:Use and attachment in accordance with local conditions. Available for 1,5 kV, 15 kV or 25 kV
Note:Use and attachment in accordance with local conditions. Available for 1,5 kV, 15 kV or 25 kV
Furrer Freyb a u t F a h r l e i t u n g e n
® 09/20
400-
900
2000-6500
400-
900
2000-6500
2713
2714
Conductor rail support, retractable, motorized
Conductor rail support, retractable, slave bracket
Note:Use and attachment in accordance with local conditions. Available for 1,5 kV, 15 kV or 25 kV.
Note:Use and attachment in accordance with local conditions. Available for 1,5 kV, 15 kV or 25 kV.
09/20 Furrer Freyb a u t F a h r l e i t u n g e n
®
Engine and gear, direction of rotation left 2715
Associated parts:Conductor rail support, retractable, slave bracket 2714
Drawing number:963.01965
Ordering information:2715 Engine and gear, direction of rotation left