Post on 16-Dec-2015
description
Applications
STS 440 is primarily designed for commercialbuildings such as offices, shops, hotels and airports as well as glazed structures such as conservatories, winter gardens and restaurants.
The STS 440 is suitable for rectangular fabric shades installed externally in front of or above horizontal and vertical glazing, including drawing vertically bottom to top.
A stainless steel wire acts as both a guide and restraint for the hembar and eliminates the need for relieving rollers or other forms of intermediate fabric support.
Design Specifications
A single 85 mm galvanized steel roller
incorporating both the drive motor and the spring compensation cassette with integral tension adjustment gear.
Extruded aluminium hem bar supporting the free end of the fabric.
Extruded aluminium headbox.
Shading Tension System 440 External wire guided tension system
Two 5 mm diameter stainless steel cables.
A continuous nylon coated tension to deploy and retract the blind.
Two 6.5 m capacity cable drums, one on either end of the fabric roller.
Design Options
Relieving roller for intermediate fabric support.
Finishes
Aluminium components - polyester powder finish, 30% gloss.
Steel - galvanised against corrosion.
Installation Option
Available with either with back fix or bottom fix headbox and return pulleys.
Maximum width: 4 mMaximum draw: 6.5 mMaximum fabric area: 16 m2Maximum fabric weight: 450 g/m2
1 / 4
STS 440 Components
7 Hem bar end cap
1 Head box back fix 2 Head box bottom fix 3 Return pulley back fix
5 Fabric roller 6 Motor with cable spool without mounting plate
4 Return pulley bottom fix
8 Hem bar
4
71
5
1
8
3
6
2 / 4
Tess 440 Technical specifications
System dimensions
Maximum width (m) 4
Maximum draw (m) 6.5
Maximum fabric area (m2) 16
Motor
Torque (Nm) 15
Current 0.65 amps
Supply 230 V AC single phase
Other voltages and frequencies available on request
System weights and structural loading
Base weight for a 1m wide system - 18 kg, additional metre width - 8 kg
Load created by fabric tension & guide wire - 100 kg per anchor point
Wind speed 11 metres / sec max.
Max. draw with Back fix return pulleys 5.0m
Max. draw with Bottom fix return pulleys 6.5m
Maximum draw (screen)
Maximum fabric area 16 m2
Maximum fabric weight 450 g/m2
Minimum width Std motor 1080 mm
Minimum width Radio motor 1230 mm
Maximum widthMinimum width
1.1 1.5 2 2.5 3 4
6.5
6
5
4
3
2
1
0
System width (m)
Sys
tem
dra
w (
m)
3 / 4
211
221
System width
79
79CRS
12 12
12
7525
53
25 A
25
180M
IN
Syst
em D
raw
- b
ack
fix
10
16020 21 30
10C
RS
55
78 67
140
MIN
191
Syst
em D
raw
- b
otto
m f
ix
25
25
142
10
156
5575
CRS
10CRS
30
220
10CRS
155
5015
Tess 440 Installation
All measurements in mm.
Horiso 2012 horiso.com 4 / 4