Birdie

Video over IP Receiverby ATecoM

General Information

Converts an IP/UDP-encapsulated MPEG-TS (SPTS or MPTS) to DVB-ASI.

Available as stand-alone product or for integration into 3rd party products

Small form factor of 1/3 19” (100x220mm) Optional AC PSU as 1/3 19” unit (supplying up to 2 “Birdie” units) Low power consumption (< 30W) DC input (12-36V= or 36-72V=)

Configuration samples Up to 3 “Birdie” units in 1RU (external PSU) 2 “Birdie” units + 1 AC-PSU (for both units) in 1RU Single board (external PSU)

Available End of Q1/2007 Full Production Q2/2007

Pictures

MPEG-TS Processing WAN-Interface

100/1000BaseT 1000BaseT SX (optional)

Multicast support UDP/IP & RTP de-

encapsulation according to Pro-MPEG CoP-3

FEC according to Pro-MPEG CoP-3

Adaptive Clock Recovery for absorption of network jitter

DVB-ASI output EN 50083-9 188 or 204 Byte Byte- and Packet mode

Full set of statistics

Statistics Ethernet Interface

According to IF-MIB RTP/RTCP

Valid, missing, fixed, duplicate, re-ordered &out of range packets

ProMPEG FEC Discarded packets

Adaptive Clock Recovery Bitrate (min., act., max) Output buffer level (min., act., max.)

Management Management ports

RS232 10/100BaseT Inband over WAN interface

Full SNMP support (V3 & V2c)

Embedded Web-Server Permanent storage of

configuration parameters Performance monitoring

Outlook Features under development

2nd ASI Output (independent streams) IP Timestamp Option for network jitter

analysis Seamless ASI protection switching

Development based on demand DVB-ASI to IP converter