Birdie Video over IP Receiver by ATecoM. General Information Converts an IP/UDP-encapsulated...
-
Upload
collin-hardy -
Category
Documents
-
view
232 -
download
1
Transcript of Birdie Video over IP Receiver by ATecoM. General Information Converts an IP/UDP-encapsulated...
Birdie
Video over IP Receiverby ATecoM
General Information
Converts an IP/UDP-encapsulated MPEG-TS (SPTS or MPTS) to DVB-ASI.
Available as stand-alone product or for integration into 3rd party products
Small form factor of 1/3 19” (100x220mm) Optional AC PSU as 1/3 19” unit (supplying up to 2 “Birdie” units) Low power consumption (< 30W) DC input (12-36V= or 36-72V=)
Configuration samples Up to 3 “Birdie” units in 1RU (external PSU) 2 “Birdie” units + 1 AC-PSU (for both units) in 1RU Single board (external PSU)
Available End of Q1/2007 Full Production Q2/2007
Pictures
MPEG-TS Processing WAN-Interface
100/1000BaseT 1000BaseT SX (optional)
Multicast support UDP/IP & RTP de-
encapsulation according to Pro-MPEG CoP-3
FEC according to Pro-MPEG CoP-3
Adaptive Clock Recovery for absorption of network jitter
DVB-ASI output EN 50083-9 188 or 204 Byte Byte- and Packet mode
Full set of statistics
Statistics Ethernet Interface
According to IF-MIB RTP/RTCP
Valid, missing, fixed, duplicate, re-ordered &out of range packets
ProMPEG FEC Discarded packets
Adaptive Clock Recovery Bitrate (min., act., max) Output buffer level (min., act., max.)
Management Management ports
RS232 10/100BaseT Inband over WAN interface
Full SNMP support (V3 & V2c)
Embedded Web-Server Permanent storage of
configuration parameters Performance monitoring
Outlook Features under development
2nd ASI Output (independent streams) IP Timestamp Option for network jitter
analysis Seamless ASI protection switching
Development based on demand DVB-ASI to IP converter