Post on 15-Jan-2016
description
BINP for FAIRBINP for FAIR
Yu.ShatunovYu.Shatunov
MoscowMoscow17-18 May 200617-18 May 2006
Research and Development Contractbetween GSI and BINP
1. Kickers for synchrotrons and storage rings2. Septum magnets for synchrotrons and storage rings 3. Technical design of ER and interaction region for collider mode
including modification for AIC/NUSTAR 4. Luminosity monitor and electron spectrometer for ELISE/NUSTAR 5. Pbar-Target and Collection 6. Ultra Cold Electron Target for NESR7. Prototype High Voltage Section for the NESR Electron Cooler 8. Resistive coil magnets for FAIR 9. Production of vacuum chambers for SIS18 quadrupoles (addressed in
EU-FP 6 Construction contract No. 515876)10. Study for High radiation resistant magnets for Super-FRS (R&D
contract No. RU/03533872/SE-05007 is already placed)11. Prototype Design for the RF-Cavities at SIS100 /300 (Continuation of
the study with purchase order No. 4500054244)
Subject and Objectives of the Contract
BINP for FAIR
• Super-FRS target high radiation resistant magnets• Electron-ions collider (eA) e-linac electron spectrometer P_bar-ions collisions• Electron colling:
NESR (e-coller, e-target); e-cooler for P_bar –A collider,
HESR e-cooler• Kickers for synchrotrons and storage rings• Septum for synchrotrons and storage rings• Superferric dipole and quads for CR • RF for SIS-100 (300)• Polarized P-P_bar collider at HESR
target,magnets
EICAIC
SIS-100(300)
pulse dipoleseptums, kickers
RF
e-cool
P-P_barcollider
SIS-18
vacuumchamber
CR quads
e-cool
Layout and Design Parameters of the Super-FRS
• The main technical challenges are at the Pre-Separator
• The physical performance of the new facility can be directly deduced from the experience with the FRS
Design Parameters
1500R
Tm20Bρ
%2.5p
Δp
mrad20φ
mrad,40φ
mradmmπ40εε
ion
max
y
x
yx
First stage of Super-FRS
productiontarget
ΔBρ/Bρ beamQ Q SQ
High power target based on liquid lead alloy technology
• Operating temperature range (300-400°C) provides annealing of radiation damages in all corresponding subsystems.
• It provides cheap and reliable solution for bearings and rotation feed-through in high radiation area.
•Shaft cooling unit
(tested on 75 kW beam power)
High radiation resistant dipole magnet
Power ~ 120 kWWeight~ 90 t
Cu
MO
High radiation resistant sextupole magnet
e-A collider
Spectrometer dp/p = 2 10-4
Full tracking simulation including detectors
10% of full(azimuthal) anglecoverage
sphericalabberations
e
A
(magnets cost 1.5 MEuro)
Quads for CR
CR septum quadrupole CR superferric quadrupole (wide)
Superconducting septums for SIS-100
1T Lambertson magnet 3T septum magnet (fast)
Simulations based on TR-Nov-2005 report.
SIS 100 extr/emrg kicker 2D simulations.
BINP proposal.
Ceramic
vacuum chamber
Ferrite8C11
Busbars
nonhomogeneous field
more homogeneous
field
Magnetic field, A/m, 0-10e5
SIS 100 extr/emrg kicker 3D simulations.
Magnetic field, A/m, 0-10e5
Design of RF-station for SIS-100 (10-th harmonic)
Frequency range 1.1-2.7 MHRF voltage 19 kV Ferrite type 400 NN-2 Number of ferrite for unit 68Number of unit 29Cost per unit 0.5 Euro
Conceptual Design for a PolarizedProton-Antiproton Collider Facility at HESR
5 6 7 8 9 10 11 12 13 14 150
1 1031
2 1031
3 1031
4 1031
5 1031
6 1031
Kinetic Energy, GeV
Lu
min
osi
ty, c
m^(
-2)s
^(-1
)
Layout of the P-P_bar collider
1212 bunches
…… for BINP
• Super-FRS target 0.5 high radiation resistant magnet 1.3• Electron-ions collider (eA) e-linac + ring 4.5 + 3.5 electron spectrometer (magnets) 1.5 P_bar-ions collisions 2.0
• Electron cooling:
NESR (e-cooler, e-target) 4.0 e-cooler for P_bar –A collider, 0.5
HESR e-cooler 5-7• Kickers for synchrotrons and storage rings 0.2/per unit• Septum for synchrotrons and storage rings• Superferric dipole and quads for CR • RF for SIS-100 (300) 0.5/per unit• Polarized P-P_bar collider at HESR + 17.0
M€