Post on 26-Jan-2017
A presentation on
BFRI and BFIDC tour, 2015
Institute of Forestry and Environmental Sciences, Chittagong University
6th Semester, Group-6Course Title: Saw Milling, Seasoning and Preservation
Contents Preface BFRI Wood seasoning and
timber physics division Wood working and
engineering division Veneer and composite
wood products division Wood preservation
division BFIDC FIDCO
Preface In our 6th semester B.Sc (hons) in
Forestry we have a course titled ‘Saw milling, Seasoning and Preservation of Wood’. To get practical knowledge about this course our honorable course teacher Md. Akhter Hossain conducted a fieldtrip to BFRI and BFIDC on 28 december, 2015.
BFRI at a glancePrevious name Forest Products Research Laboratory (FRL)
Present name Bangladesh Forest Research Institute (BFRI)
Established 1955
Location HQs at Chittagong City
Land Area 1100 ha. (including 28 ha. at HQs)
Disciplines 11 research Divisions under Forest Management Wing, 06 under Forest Products Wing and 02 Common Services Divisions
Field Station 21 with a total area of 1072 ha.
Wood seasoning and timber physics division
Under Forest Products Wing, BFRI.
Research Activity: Physical properties of wood and Wood seasoning process
Achievement: Invention of wood seasoning solar kiln is the
best achievement of this division.
Wood seasoning Seasoning is the procedure of reducing moisture
content at a desired level.
Process of Seasoning:1. Air seasoning2. Kiln seasoning3. Solar kiln seasoning
Among these three BFRI is now only practicing Solar kiln seasoning.
Solar Kiln
Dr. M. A. Sattar invented Solar kiln in 1980.
Features of Solar kiln:
The Solar kiln is comprised of a wooden frame superstructure.
The roof has been covered with ordinary thick glass and has an inclination towards the south at an angle equal to the latitude of the location to ensure maximum absorption of solar radiation.
Continue…. The walls have
been made with a layer of white transparent polythene sheet or glass.
Corrugated galvanized iron sheet, painted black on both sides have been fixed beneath the glass roof as an absorber of solar radiation.
Continue…. One 24inch diameter fan driven by ¼ horse-
power motor has been incorporated for air circulation.
Two vents, one inlet and another outlet, of 8inch*9inch have been provided for the control of the humidity inside the kiln.
Dimension of the kiln: 12ft long, 8ft wide, 9ft high at the north wall and 5.5ft high at the south wall.
Bearing capacity: It can accommodate 125 cft timber of maximum 7.5 ft long.
Physical Properties
Machines:
Moisture meter Universal Testing Machine (UTM)
Continue…
UTM Moisture Meter
Continue…UTM:
UTM is used for measuring- Static Bending Test (modulus of rupture and
elasticity) Compression parallel to grain Compression perpendicular to grain Nail holding capacity Cleavage test Tension perpendicular to grain Toughness Shear test
Wood working and engineering division
Under Forest Products Wing, BFRI.
Research Activity:1. Saw milling process2. Saw doctoring3. Furniture making and development
Continue
Achievement: They have invented some technologies to
produce novelty items from different colored wood gluing together.
One of the special achievement of this division is the invention of technology for using Rubber wood in furniture making.
Wood Preservation Division Under Forest Products Wing, BFRI.
Research activity: Enhancing durability of wood
Achievement: They have invented BB (Boric acid+Borax), CCB
(Copper Sulphate, Sodium di-chromate, Boric acid) solutions for wood preservation.
BB solution
Elements: Boric Acid(H3BO3), Borax(Na2B4O7.10H2O)
Ratio for 10% solution: Boric Acid:Borax=2:2 and 9 times water
Use: Used in the preservation of interior furniture
making wood.
CCB Solution
Elements:Copper Sulphate (CuSO4. 5H2O), Sodium di-chromate (Na2Cr2O7.2H2O), Boric acid (H3BO3)
Ratio for 10% solution:CuSO4.5H2O: Na2Cr2O7.2H2O: H3BO3=2:2:1
Use:Used in the preservation of wood for exterior construction purpose.
Veneer and Composite Wood Division Under Forest Products Wing, BFRI.
Research activity: Ensuring maximum utilization of less
used woods and wood residues Developing technologies for making
furniture from bamboo.
Continue…Procedure of making bamboo furniture: Splitter: For splitting bamboo into pieces Four side planner: For resizing bamboo pieces Seasoning: At 20-25% moisture content level Treatment: Dipping in BB solution for 48 hours. Seasoning: At 8-10% moisture content level Hot pressure treatment: Using urea formaldihyde
glue at 150 C temperature heat and 200 psi pressure
BFIDC at a glance
Bangladesh Forest industries Development Corporation(BFIDC) was established in 1959.
Previous name was Pakistan Forest industries Development Corporation(PFIDC)
Headquarter of BFIDC is located at 73 Motijheel Commercial Area, Dhaka-1000.
In Chittagong BFIDC is located in Chandgaon.
Continue…Wood preservation division: In BFIDC, now a days they make
revolution by marketing rubber made furniture which have great positive impact on the low supply of wood crisis. Rubber wood is very cheap in market value but with some preservation process it may provide a very good and durable furniture.
Continue… Wood preservation
done by two way. They are:
1.pressure treatment
Establishment:1959-1960
Pressure: 100 PSI Time:1-3 hour Preservative: 10%
BB solution 65ft in length and
1200cubic ft lumber can preserve in the cylinder at a time
Continue…
Steam Control room: Cylinder-2 Length-90 ft
Continue…
2.non-pressure treatment They also preserve the wood by dipping the wood
into water mixing with chemical which prevent wood decay and other harmful process when the pressure process is delayed.
Continue…Saw milling division: They have two saw mill of their own .
Continue…Furniture making department:
THANKS ALL