Post on 30-Jul-2018
bemofaçadevarieTy
BEMO METAL FAÇADES
bemofaçaderange
2
3
CONTENT
PrOduCTs
Façade composite panelsFaçade panelsPrIMO Clip-on façadeFaçade shinglesFaçades with standing seam profilesCorrugated profilesTrapezoidal profiles
32 – 51
32 – 3536 – 3940 –4142 – 4546 – 4950 – 5354 – 57
FaçadE varIETy
Façade systemsvariety of materialsColour varietyLight and shadow effectsHeat-bridge free with TEKOFIXsustainability and quality
6 – 31
6 – 1112 – 1516 – 19 20 – 23 24 – 27 28 – 31
BraNd PHILOsOPHy 4 – 5
rOOF sysTEMs 58– 59
4
5
BraNd PHILOsOPHy
The leaf is the archetype of the roof. It has the only correct shape for the very special place at which it grows. Its sustainable design is matched perfectly to the respective environmental conditions. Its range of variety thrills and invites the viewer to indulge in his fantasy.
BEMO PrOduCTs arE OrIENTEd TO THE grEaTEsT arCHITECT OF aLL TIME: NaTurE.
The BEMO leaf is therefore the outwardly visible symbol of a powerful brand name for extraordinary buildings and exceptional solutions for roofs and façades.
In addition to the highest quality, we pay close attention to long-life and recyclability when selecting materials. Our mobile production lines can be used everywhere in the world, thereby significantly reducing transport costs and corresponding emissions. using out patented production method, we create shapes that allow planners and architects the free space they need to overcome traditional conventions.
The rich variety of nature can be re-created in architecture based on our exemplary selection when combining materials, surfaces and colours.
Our 3d software, developed by us in-house, supports you in the planning and measurement of the supporting structure right up to the design of the substructure, thereby ensuring high quality without any unpleasant surprises. “german Technology” in production and the countless number of possible combinations of available surfaces, materials, shapes and colours allow practically any design idea to be implemented.
We therefore approach our ideal very closely: nature.
The besT ideal is naTure – The besT Technology “made in germany”.
6
7
FaçadE sysTEMs
limiTless varieTy – for your ideas.
We start with your design concept – and then we implement it. Metal façades provide endless design possibilities. The play with materials, surfaces or shapes places almost no limits on your fantasy. Metal façades fulfil almost all requirements. This already starts with the selection of materials. steel, stainless steel, aluminium or copper? Flat, corrugated, perforated, rounded or individually cut? Which variety would you like?
a THOusaNd – aNd MOrE POssIBLITIEs
Brushed or colour-coated surfaces? Red, blue, green, mint or aubergine? Gloss, matt or metallic? Or perhaps a façade with colour gradients that change according to the light incidence? For instance, from orange to violet? All that is possible - and even more. Immerse yourself in the BEMO world of a thousand colour possiblities – and more. The standard range of colours is already quite something. Combine colours with surfaces. Have your own individual colour mixed, or even better, design your own colour with our support. Our colour laboratory in Switzerland makes this possible, and sets new standards in the process. We provide a limitless variety of possibilities in the implementation of your ideas. Let us inspire you!
8
9
give your building a new face – wiTh bemo.
FaçadE sysTEMs
a façade is not just the eye-catcher of a building, it also protects and insulates for years against wind and weather. using the unique BEMO variety of materials, surfaces, colours and shapes, façades can be designed exactly according to your function and design requirements. The manifold BEMO range thereby opens up whole new design possibilities. For example, the patented BEMO-MONrO system, which allows a whole new design language that for a long time previously could not be implemented. a revolution for façades in freeform architecture.
varIETy IN dEsIgN – PErFECTION IN IMPLEMENTaTION.
In addition to design freedom, we naturally also provide technical perfection. For example using the non-heat conducting TEKOFIX substructure, the BEMO-FLON long-term surface coating or our 3D rendering software to support you in your planning.
10
museum, Prato // italyArchitecture: NIO architects
11
FaçadE sysTEMs
The besT Technical suPPorT – righT from The sTarT.
We already support you in the draft phase. Our field technicians and design team support you in all questions concerning the planning and tendering of a BEMO façade . We will happily create renderings of the highest quality or static and building-physics analyses for your tendering documents. Our motivation is to contribute to a successful project that you and we can be proud of each and every time.
Our 3d PLaNNINg – INdIsPuTaBLy THE BEsT.
Based on the worldwide unique metal freeform BEMO-MONRO system, we have continuously optimized our 3D planning and are therefore the indisputable technology leaders in metal roof and façade area. You can build on this high-quality basis when planning your project. Heat-bridge free distance constructions for back-ventilated curtain façades and the correspon-ding proof and calculation modules, as well as static calculation programs, are quickly online and can be accessed easily.
12
13
we sTarT wiTh The maTerial – and The varieTy of iTs surfaces
varIETy OF MaTErIaLs
IT dOEsN’T aLWays HavE TO BE varIEgaTEd aNd COLOurFuL.
Just let the material work. High-quality base materials with a natural finish often have their own particular charm. surface treatment by brushing or stuccoing can thereby accentuate the natural effect of the material. BEMO provides an enormous variety of metal base materials for this, with treated or natural-finish surfaces – for all BEMO profiles.
14
15
varIETy OF MaTErIaLs
aluminium steel copper Titanium zinc
surfaces for meTal façades – aT Their mosT beauTiful
aluminium, with its high level of protection against corrosion and good formability, is our main material – painted, stucco, with natural finish, or pre-weathered. stainless steel with natural finish, polished or brushed – a material with the highest resistance to chemicals and the special design effect. available for all single-sheet BEMO profiles and flashings.alu-zinc aZ 185 – “zinc oxide” can always be delivered from stock. additional metals such as copper or zinc are available on request on a project-by-project basis.
We will be happy to support you in the static analysis and any questions regarding the chemical resistance of the materials.
stainless steel
16
17
we Provide you wiTh unlimiTed colours – and The colour laboraTory.
COLOur varIETy
dEvELOP yOur OWN rEquIrEd COLOur.
Let us know your required shade and we will mix your special colour. you will be our guest for a day at our swiss colour laboratory – develop the colour you need for your project, and the leading coating manufacturer worldwide will apply it to your selected parent material. We then produce your optimally planned façade profile from this.
Our “standard colour chart”, with its large selection, is already in a class of its own. And best of all: all colours are available in base material aluminium for all products from the BEMO range – even for all connecting pieces – always in the same shade. Naturally, the same applies for the approx. 40,000 colours from our “supplementary range”. These can already be delivered from a project requirement of 500 sq.metres. All gloss grades are available, from matt to high gloss.
18
19
COLOur varIETy
TwenTy Three – forTy Thousand – infiniTe
TWENTy THrEE BasE COLOurs aNd FOrTy THOusaNd varIaNTs – WITH BEMO yOu arE sPOILT FOr CHOICE.
Twenty three base colours, forty thousand variants and an infi nite number of possibilities in our colour laboratory. you alone set the limits. With BEMO you will always fi nd the right colour shade for your project. Just let yourself be inspired by our universe of colours.
20
21
façades wiTh a difference – The Play of lighT and shadow
LIgHT aNd sHadOW
BrINg yOur FaçadE TO LIFE. Façades with perforated profiles change depending on the fall of light, the position of the sun, or special lighting. They can be used in innumerable situations – and their design possibilities are just as innumerable. all BEMO façade profiles are available perforated. using different hole patterns – for an exciting design or an energy-saving shading solution on outdoor façades, for extraordinary lighting effects or for acoustic measures within the building.
22
23
LIgHT aNd sHadOW
we maKe The façade exciTing – and colourful
With their perforated profi les in base material aluminium, they provide a wide selection of hole patterns – for all BEMO products. For standing seam and corrugated profi les, façade panels and façade composite panels. The hole pattern that can be used thereby depends on the structural requirements – and here too, we will be happy to advise you. various profi le geometries and colours can also be combined into a unique, comprehensive design from the same base material and hole pattern. Or you keep the colour and vary the hole pattern. There are hardly any limits to façade design with BEMO.
rv 3-5 rv 5-8 sw 11-14
24
25
To ensure The heaT remains in The building – The bacK-venTilaTed curTain façade wiTh TeKofix
HEaT-BrIdgE FrEE WITH TEKOFIX
TEKOFIX IMPrOvEs OHTC By uP TO 75 %.
BEMO, with its TEKOFIX console, has a heat-bridge free substructure approved by building authorities currently for back-ventilated curtain façades. TEKOFIX guarantees you heat-bridge freedom for the entire façade structure. With TEKOFIX, the OHTC of your façade improves by up to 75 %. The unique BEMO solution doesn’t just save energy, but it also permits the thickness of the insulation to be signifi cantly reduced.
Special aluminium support profi les for TEKOFIX round-off the system and allow for easy installation of all BEMO façade products, resulting in a high-quality technical solution for an individualised design and a façade that demonstrably meets the requirements of building physics.
26
27
22 °C
21 °C
20 °C
18 °C
14 °C
8 °C
6 °C
0 °C
-4 °C
TEKOFIX provides security when planning. a special, web-based OHTC program allows the design of your façade to be exactly calculated, taking punctiform thermal bridges into consideration, as required by the current ENEv. TEKOFIX OHTC tables are the perfect calculation basis for the planner. We provide structural pre-dimensioning “online” for all common substructures. and we create a structural analysis on request.
TEKOFIX FEELs FINE BEHINd EvEry FaçadE.
The BEMO substructure with TEKOFIX consoles has been specially developed for back-ventilated curtain façades. It is suitable for all façade products and all materials. Whether metal, stone, façade composite panels fi bre cement of ceramic panels, brick, glass wool or plastic – TEKOFIX feels fi ne behind every façade.Additional information on the unique TEKOFIX solution is available at www.tekofi x.de.
HEaT-BrIdgE FrEE WITH TEKOFIX
irresPecTive of which model you choose – we have already done The calculaTions for you.
28
29
QualiTy wiThouT comPromises – for façades wiTh The highesT lifeTime
susTaINaBILITy aNd quaLITy
LONg-LIFE aNd rECyCLaBLE.
We only use materials of the very highest quality, are regularly monitored both by ourselves and outside agencies, and expect the same from our longstanding suppliers. We use 100 % recyclable aluminium as the preferred material for our façade products; due to its characteristics, it ensures a long-life for our façade products.
Our individual project consultation is aimed at the technically correct use of the BEMO products to ensure a long life-time for the project.
Deutsche Gesellschaft für Nachhaltiges Bauen e.V.
®
German Sustainable Building Council
Member of the
30
31
susTaINaBILITy aNd quaLITy
so ThaT red remains red – and gloss remains gloss
a FaçadE COaTINg Has TO rOLL WITH PuNCHEs.
above all, uv radiation has also intensified considerably in our latitudes in the past years and decades. Many common paint systems therefore lose their “shine” relatively quickly, or fade completely. after just a short period of time, lavish repainting with all of its negative environmental impact often becomes inevitable.
BEMO recommends the BEMO-FLON paint system for all façade products made using aluminium as base material. BEMO-FLON is a fluoropolymer coating with exceptional UV resistance and best chemical characteristics. Its hydrophobic surface, similar to that of Teflon, allows for complete removal, e.g. of graffiti using the BEMO-FLON cleaning agent. Connection parts such as window frames or doors can be painted using the same original colour shade as the façade covering, and can therefore be visually adapted to the principal area.
Minimum shade change for BEMO-FLON
BEMO-FLON weather test: Colour shade raL 5014 powder blue
Hours of quv-B exposure
shade change dE
(source: Monopol ag)
standard powder
PvdF (70/30 blend)
BEMO-FLON
standard powder
PvdF (70/30 blend)
BEMO-FLON
residual gloss %
Hours of quv-B exposure
Perfect gloss retention for BEMO-FLON
32
3333
FaçadE COMPOsITE PaNELs
as a covering material for back-ventilated curtain façades, as an underside covering or when used in the interior – our façade composite panels are used everywhere, where there is a design requirement for flat surfaces in high quality. They are comprised of two high-quality aluminium cover sheets and a plastic core in the specification “flame-retardant“, or with an “incombustible“ core when higher fire resistance is required. They can be fixed with screws and rivets visible, or invisibly with glue or as a clipped coffer.
Individually cut sizes can be laid in a random structure, offset or in a grid – and naturally, you have a free choice of colour. The high-quality BEMO-FLON coating thereby ensures that the colour remains true for a long time.
THE HEaT-BrIdgE FrEE TEKOFIX suBsTruCTurE Is THE PErFECT BasIs FOr a FaçadE THaT MEETs THE HIgHEsT TECHNICaL sTaNdard.
façade comPosiTe Panels – design aT The highesT level
34
Closed edge with TEKOFIXPerforated Open edge Edged
3535
FaçadE COMPOsITE PaNELs
THE NuMErOus BENEFITs:
The whole range of BEMO colour variety, also for our composite panels. all flashings and connectors from the same primary material. Formats up to max. 2 000 mm width and 7 200 mm length – planned to fi t
for your project and cut at our factory. Perforated models with perforation up to 45 %. Closed cutting edges, pre-drilling of panels and corner lipping
from our own production. Can be laid in a random structure, off set or in a grid. single or multiple colours. Can be delivered in flammability ratings B-s1,dO and a2-s1,dO.
On request, we will support you in all phases of your project, from the design of your façade right up to implementation planning, including the TEKOFIX substructure.
overview of bemo façade comPosiTe Panels
ENErgy savINgssusTaINaBILITy aNd
quaLITy
a2
LIgHT aNd
sHadOW
MaTErIaL
varIETyCOLOur varIETy
façade composite panelscolours in stock similar to (b-s1, do)
3003 / 7016 / 9006 / 9007 / 9010 / Manganese / azure blue / Intensive green
approval number Z-33.2-1559
outer coating BEMO-FLON
covering sheet Two aluminium covering sheets, each 0.5 mm, EN aW-3105 or 3005 alloy
core 3 mm polyethylene / inorganic fi ller material*
format sizes b: 800 – 2 000 mm, l: to 7 200 mm
stock sizes b: 1 270 mm, l: 4 200 mm
hole patterns Press cuts up to max. 45 % perforation
weight Polyethylene: 7.6 kg/m2 / inorganic fi ller material: 8.1 kg/m2 *
flammability ratingas per din en 13501-1
Polyethylene: B-s1, dO / inorganic fi ller material: a2-s1, dO *
* no stock goods; deliverable on project basis
36
3737
FaçadE PaNELs
The range of variety is almost limitless. various materials and, combined with flat or serrated (toothed) structures, in flexible grid dimensions, with the whole variety of colours within the BEMO colour palette, laid vertically, horizontally or diagonally – there is no limit to the design possibilities. The BEMO façade panels can be fixed either hidden or visible.
WE WILL BE HaPPy TO dEvELOP yOur sPECIaL “BuILdINg PaNEL“ WITH yOu, aNd PrOduCE THIs IN Our OWN EdgINg PrOFILE WOrKsHOP – uP TO LENgTHs OF 8 METrEs. Suitable fastening systems are available with the heat-bridge free TEKOFIX substructure and our clip-on system.
façade Panels – limiTless range of varieTy
38
Box panel special panelssliding panel slot-in panel Perforated panels Panels with TEKOFIXZP 35-800
3939
FaçadE PaNELs
overview of bemo façade Panels
THE NuMErOus BENEFITs:
The whole range of BEMO colour variety, also for our façade composite panels. In all metals, e.g. aluminium, steel, stainless steel, zinc, or copper. selectable surfaces: e.g. natural fi nish or brushed. all flashings and connectors from the same primary material. Formats from 100 mm to 600 mm width and up to 8 000 mm length –
planned to fi t and cut at our factory on state-of-the-art machines. Perforated models with perforation up to 62 %. Can be laid horizontally, vertically or diagonally. Can be laid in a random structure, off set or in a grid. single or multiple colours. screwed into the substructure or floating using the BEMO clip holders. Conical shapes possible.
On request, we will support you in all phases of your project, from the design of your façade right up to implementation planning, including the TEKOFIX substructure.
ENErgy savINgssusTaINaBILITy
aNd quaLITyLIgHT aNd sHadOW
MaTErIaL varIETy
COLOur varIETy
façade panelsBox
panelslot-in panel
sliding panel ZP 35-800
material thick-ness in mm
steel 0.75 – 1.5 0.75 – 1.0 0.75 – 1.0 –
aluminium 0.9 – 2.0 0.9 – 1.5 0.9 – 2.0 0.9 – 1.5
coatings PE / PvdF / BEMO-dur / BEMO-FLON
surfaces stucco / brushed / alu-zinc / pre-weathered / cladded
max. lengths 8.00 m
hole patterns rv 3.00 – 5.00 rv 5.00 – 8.00
material aluminium
material thick-ness in mm 0.9 – 2.0
40
single clip on T profi le with TEKOFIX substructure PrIMO panel with folded edgesType s on T profi leType K with u wall holder PrIMO panel with substructureType K on coff er
41
PrIMO CLIP-ON FaçadE
overview of Primo cliP-on façade
THE NuMErOus BENEFITs:
The whole range of BEMO colour, material and surface variety, also for our PrIMO clip-on façade. Perforated models possible with perforation up to 62 %. Can be laid in a random structure, off set or in a grid. single or multiple colours. variable grid sizes possible, also in combination with each other. Large grid size up to 800 mm possible. Permanent and unlimited expansion capability. Easy and very fast assembly of the panels. Panels can be replaced easily and quickly. special solutions doable for windows and corners. substructure can be selected for each application.
On request, we will support you in all phases of your project, from the design of your façade right up to implementation planning, including the TEKOFIX substructure.
Primo clip-on façadegrid dimension 200 – 400 500 600 800
material thick-ness in mm
steel 0.75 – 1.5 1.25 – 1.5 1.25 – 1.5 1.5
aluminium 0.9 – 1.2 1.2 – 2.0 1.5 – 2.0 2.0
coatings PE / PvdF / BEMO-dur / BEMO-FLON
surfaces stucco / brushed / alu-zinc / pre-weathered / cladded
max. lengths 8.00 m
hole patterns rv 3.00 – 5.00 rv 5.00 – 8.00
material aluminium
material thick-ness in mm 0.9 – 2.0
ENErgy savINgssusTaINaBILITy
aNd quaLITyLIgHT aNd sHadOW
MaTErIaL varIETy
COLOur varIETy
42
43
FaçadE sHINgLEs
Our metal façade shingles provide a very special, architectural alternative. The variety is simply limitless BEMO. all metal materials in the BEMO range can be used. Combined with various surfaces, whether colour-coated or in natural finish, they provide innumerable alternatives.
dIaMONd, rECTaNguLar Or squarE – THE BEMO FaçadE sHINgLEs CaN BE PrOduCEd IN varIOus sIZEs. Fastening is easy as pie – one screw or a nail is enough for each shingle. BEMO façade shingles are eminently suitable for restoration measures on existing façades – even in arched structures. On new façades, façade shingles made of high-quality materials, e.g. stainless steel achieve a special emphasis.
façade shingles – for a cusTomized arrangemenT
44
rM200 rM250 rM340 special shingles
45
FaçadE sHINgLEs
overview of bemo façade shingles
THE NuMErOus BENEFITs:
The whole range of BEMO colour, material and surface variety, also for our façade shingles. variable grid sizes possible, also in combination with each other. Large grid size up to 800 mm possible. Easy and very fast assembly of the shingles. shingles can be replaced easily and quickly. special solutions for windows and corners. substructure can be selected for each application.
On request, we will support you in all phases of your project, from the design of your façade right up to implementation planning.
façade shingles
formats 20 x 20 cm 25 x 25 cm 34 x 34 cmspecial
formats up to 0.6 sq.m.
material aluminium / steel / stainless steel / zinc / copper
material thickness 0.7 mm (other thickness on request)
surfaces stucco / brushed / alu-zinc / pre-weathered / cladded
coating PE / PvdF / BEMO-dur / ML / BEMO-FLON
ENErgy savINgssusTaINaBILITy
aNd quaLITyLIgHT aNd sHadOW
MaTErIaL varIETy
COLOur varIETy
46
4747
FaçadEs WITH sTaNdINg sEaM PrOFILEs
your architectural idea requires flowing transitions and non-cubic structures? In that case, the BEMO standing seam façade provides you with all design possibilities. Individual, flowing lines adapted to almost every building shape can be reproduced using the BEMO-MONrO system.
CurvEd aNd rOuNdEd Or FrEE sHaPEs FrOM THE rOOF arEa arE INTEgraTEd aNd CONTINuEd sEaMLEss IN THE FaçadE arEa. IN ONE LENgTH. NON-PENETraTIvE.
To do this, the BEMO standing seam profile is flanged on in a special holding system, free of secondary movement. For cylindrical or “free“ building shapes, the BEMO-DOME substructure compensates the tolerance and ensures that the tracks keep to the line – in any direction you choose! The BEMO variety of materials and colours is of course also available for your standing seam façade.
sTanding seam –always eleganT
48
straight Conical Freeform BEMO-MONrO
Perforated arched Crimp-arched BEMO-dOMEsubstructure
Bullnose
4949
FaçadEs WITH sTaNdINg sEaM PrOFILEs
THE NuMErOus BENEFITs:
The whole range of BEMO colour variety, also for our standing seam façades. In all metals, e.g. aluminium, steel, stainless steel, zinc, or copper. selectable surfaces: e.g. natural fi nish or brushed, painted or stucco. all flashings and connectors from the same primary material. variable widths from 100 mm. Lengths as required due to possibility of
on-site production. Parallel, conical or freeform tracks. arching of the tracks with radii from 800 mm. Perforated models with perforation up to 62 %. Can be laid horizontally, vertically or diagonally. The non-penetrative assembly of the BEMO standing seam holders in aluminium or
using thermal holders for the version free of thermal-bridges. 3-dimensional adjustment of the substructure to the structure by means of
BEMO-dOME substructure. seamless transitions from the roof into the façade.
3D planning is based on an on-site 3D scan to ensure economical assembly and a high level of workmanship.
overview of The bemo sTanding seam
bemo standing seam
materials aluminium steel stainless steel Copper Titanium
zincmaterial thick-ness in mm 0.8 – 1.2 0.63 – 0.75 0.6 – 0.7 0.8 – 1.0 0.7 – 1.0
coatings BEMO-FLON / PvdF / Polyester
surfaces stucco / brushed / alu-zinc / pre-weathered / cladded
Production lengths Factory production up to 38 m, on-site production > 38 m
building authority approvalZ-14.1-182 BEMO-FLaT-rOOF aluminium standing seam profi le roof elementsZ-14.1-640 BEMO-FLaT-rOOF steel standing seam profi le roof elements also available: FM approvals, asTM, BBa certifi cate, avis Technique, gOsT
Profi le types N50 N65
Profi le widths 333 mm, 429 mm, 529 mm, 600 mm
305 mm, 333 mm, 400 mm, 500 mm, 600 mm
variable profi les from 100 mm from 100 mm
hole patterns rv 3.00 – 5.00 rv 3.5 – 5.00 rv 5.00 – 8.00 sW 11-14
material aluminium
material thick-ness in mm 1.0 – 1.2
ENErgy savINgssusTaINaBILITy
aNd quaLITyLIgHT aNd sHadOW
MaTErIaL varIETy
COLOur varIETy
50
5151
COrrugaTEd PrOFILEs
The classic in façade design is the corrugated profile. Especially in residential buildings, but also in industrial and commercial buildings, corrugated profiles are an attractive and sustainable façade solution. When combined with the numerous possibi-lities in colours, surfaces and materials, they give your building a special touch.
EXECuTEd IN HIgH-quaLITy aLuMINIuM Or ECONOMICaL sTEEL – COrrugaTEd PrOFILEs aLWays ENsuE aN INTErEsTINg arCHITECTuraL aMBIENCE IN THE dEsIgN OF THE FaçadE.
You can select from four different sine waves, depending on the size of the façade area. Each profile can therefore be used horizontally or vertically. Back-ventilated curtain façades are preferably assembled on the heat-bridge free TEKOFIX subst-ructure. Also as covering for coffer systems in industrial and commercial buildings. An extensive range of system accessories rounds off our offer of corrugated profiles.
corrugaTed Profiles – The classic meTal façade
52
WP 18-76 WP 55-177WP 27-111 Perforated corrugated profi le
Corrugated profi le with TEKOFIXWP 42-160
5353
COrrugaTEd PrOFILEs
THE NuMErOus BENEFITs:
The whole range of BEMO colour variety, also for our corrugated profi les. In all metals, e.g. aluminium, steel, stainless steel, zinc, or copper. selectable surfaces: e.g. natural fi nish or brushed, painted or stucco. all flashings and connectors from the same primary material. Lengths up to 17.50 metres. Perforated models with perforation up to 40 %. Can be laid horizontally, vertically or diagonally. Heat-bridge free assembly on the TEKOFIX substructure.
The BEMO technical team supports you in the planning, tendering and dimensioning on-site.
overview of bemo corrugaTed Profiles
corrugated profi lesWP 18-76 / WP 27-111 WP 42-160 / WP 55-177
material thick-ness in mm
steel 0.63 – 0.88 0.75 – 0.88
aluminium 0.7 – 1.00 0.9 – 1.00
alu-zinc 0.63 – 0.88 0.75 – 0.88
stainless steel 0.7 0.7
copper 0.7 – 1.00 0.7 – 1.00
Titanium zinc 0.8 – 1.00 On request
coatings PE / PvdF / BEMO-dur / ML / BEMO-FLON
surfaces stucco / brushed / alu-zinc / pre-weathered / cladded
max. lengths depending on material; 17.50 m
Test report on structural type testing for corrugated-steel profi les, test report no. T14-181 dibt no. z-14.1-548 for aluminium corrugated profi les and their connections
hole patterns rv 3.00 – 5.00 rv 5.00 – 8.00
material aluminium
material thick-ness in mm 0.9 – 1.0
ENErgy savINgssusTaINaBILITy
aNd quaLITyLIgHT aNd sHadOW
MaTErIaL varIETy
COLOur varIETy
54
5555
TraPEZOIdaL PrOFILEs
THE BEMO TraPEZOIdaL PrOFILE PrOvIdEs THE MOsT ECONOMICaL sOLuTION FOr FaçadEs. IN aLL BEMO COLOurs – WITH aLL BEMO surFaCEs aNd MaTErIaLs.
depending on the profile geometry, they can have wide clearances between the required fastening points, thereby reducing the work involved on the substructure.
Design variants are provided by the various profile geometries. Evenly profiled geometries appear harmonious from a distance – unevenly profiled geometries increase the surface appearance. The BEMO trapezoidal profiles are suitable for covering coffer systems, for direct assembly on the substructure for unheated buildings, or as a covering for back-ventilated curtain façades.
TraPezoidal Profiles –The economical soluTion
56
TP 20-75 TP 20-100 TP 35-207 TP 40-100 TP 45-150 TP 50-250
5757
TraPEZOIdaL PrOFILEs
THE NuMErOus BENEFITs:
The whole range of BEMO colour variety, also for our trapezoidal profi les. In all metals, e.g. aluminium, steel, stainless steel, zinc, or copper. selectable surfaces: e.g. natural fi nish or brushed, painted or stucco. all flashings and connectors from the same primary material. Lengths up to 19.50 metres. Perforated models. Can be laid horizontally, vertically or diagonally. Heat-bridge free assembly on the TEKOFIX substructure, as profi le for unheated buildings, or
as a covering for coff er systems.
The BEMO technical team supports you in the planning, tendering and dimensioning on-site.
overview of bemo TraPezoidal Profiles
Trapezoidal profi lesTP 20-75 / TP 20-100 / TP 35-207 / TP 40-100 / TP 45-150 / TP 50-250
material thick-ness in mm
steel 0.50 – 0.88 (depending on the profi le)
aluminium 0.50 – 1.00 (depending on the profi le)
alu-zinc 0.50 – 0.88 (depending on the profi le)
stainless steel 0.70 (not TP 20-75 and TP 20-100)
copper 0.70 – 1.00 (not TP 20-100)
coatings PE / PvdF / ML / BEMO-FLON
surfaces stucco / brushed / alu-zinc / pre-weathered / cladded
max. lengths depending on material and profi le; up to 19.5 m
Test report on structural type testing for steel trapezoidal profi les, test report no. T14-159, test report on the structural type testing for aluminium trapezoidal profi les, test report no. T14-188* not TP 20-100
hole patterns rv 3.00 – 5.00 rv 5.00 – 8.00
material aluminium
material thick-ness in mm 0.9 – 1.0
ENErgy savINgssusTaINaBILITy
aNd quaLITyLIgHT aNd sHadOW
MaTErIaL varIETy
COLOur varIETy
58
hotel and resort // ukraineArchitecture: Foster & Partners
swimming pool // The netherlandsArchitecture: 4a Architekten GmbH
conference centre lausanne // switzerlandArchitecture: Richter Dahl Rocha & Associés architectesPhoto: Sérgio Guerra
bus station graz // austriaArchitecture: Zechner & Zechner ZT
5959
bemo is your ParTner for excellence in archiTecTure – for façades and roofs
rOOF sysTEMs
BEMO has a unique range of services for metal roofs of all sizes, for every roof shape and for every climate zone. Naturally in the unique variety of materials and colours that you already know from BEMO façades.
BEMO is the indisputable global leader in technology for complex metal-roof projects. due to our patented production technology and incomparable 3d planning instruments, we always and everywhere deliver the highest quality “Made in germany”. using materials of the highest quality, thorough planning and low-wear assembly systems, BEMO ensures the long-life of the cladding materials. gladly also for your project. We are able to directly produce our roof profiles anywhere in the world using our mobile production machines.
BEMO has the knowledge and technology to implement your ideas. visions become reality.
60
dEsIgN aNd varIETy
BEMO specialises in projects whose implementation initially seems impossible. The award-winning, patented BEMO-MONrO system allows a design language that could not be implemented for a long time previously. a revolution for the design of roofs and façades in freeform architecture.
We create an interesting architectural ambience with inno-vative surfaces and materials. Our colour coatings are in all conceivable shades – and in all gloss grades. The variable design of the tracks ensures optimal fidelity to the track on every building. We provide a limitless variety in the implementation of your ideas.
susTaINaBILITy
We expend a lot of energy to make sure that a building needs as little of it as possible. The best method is the use of innovative systems.
The BEMO gFK thermal holder is free of highly heat-conduc-tive components and thereby aids in a heat-bridge free roof construction. using our system-compliant mounting rails, we achieve completely non-penetrative surfaces for the use of solar modules within photovoltaics and solar heating.
The aluminium we use has an exceptional ecological balance. It is up to 100 percent recyclable.
ECONOMy
appealing building design must not only meet the highest aesthetic demands. Economic feasibility and cost-efficiency also play a decisive role. Thanks to our mobile production technology, we can produce at the site of the project, thereby avoiding a good deal of material transport. as well as quality, in our material range we place emphasis on long-life and maintenance costs, e.g. due to surfaces with very long cleaning intervals.
The 3d measurement of the substructure detects tolerances and prepares the material for simple and safe assembly. This means economic efficiency, from planning to implemen-tation and right through to the maintenance of the building.
61
THE sKy’s THE LIMIT
quaLITy aNd PErFECTION
We only use quality material from renowned suppliers. The multitude of available materials, surfaces and colours can be combined optimally. Our 3d planning and flexible substructure systems provide a secure basis for our BEMO-MONrO freeform system. Our patented production machines are mobile and therefore available everywhere. Our File-to-Factory soft ware ensures perfect implementation of planning during production.
you can rely on a perfect implementation of your project in excellent quality – completely.
INdIvIduaLITy
We support the courage of unusual approaches and distinc-tive architecture. variable widths of standing seam tracks and lengths of over 100 metres are both flexible and secure. Concave and convex arches down to the smallest radii can be achieved, and the tracks can always be adjusted to run along the required building shape. BEMO-MONrO allows for implementation of freeform and double-curved structures with one metal roofi ng – without any loss in quality of the appearance.
The combination of BEMO materials, surfaces and colours provides innumerable design possibilities. To create free-dom for individuality of all kinds.
INTErNaTIONaLITy
BEMO is a global brand comprised of several strong, independent companies.
With branches and partners in Europe, North- and south america, the Middle East and singapore, we are represented globally with seven production locations and numerous mobile production lines. an international network of fi rst class assembly companies help us and our customers in the implementation of premium quality projects irrespective of the geographical location.
Our sales and technology team is multilingual and experi-enced in global projects with the most varied requirements. Wherever you are implementing your project: We are on site!
The sKy’s The limiT
62
www.bemo.com 1055
34-1
1
/04/
16
bemo sysTems gmbhFriedrich-List-straße 2574532 Ilshofen-Eckartshausengermany
T: +49 7904 9714 70F: +49 7904 9714 246E: sales@bemo.comW: www.bemo.com
bemo Project engineering (ME) L.L.CP.O. Box 14546ras al Khaimah, uaE
T: +971 7 244 4566F: +971 7 244 4577E: sales@bemo.comW: www.bemo.com
bemo uKThe yard, Church streetHeage, Belperderbyshire, dE56 2BW, uK
T: +44 1773 853 694F: +44 1773 857 599E: sales@bemouk.comW: www.bemo.com
bemo dıs cephe çatı Kaplama sistemleri Ticaret ve sanayiLimited sirketigöktürk Cad. suvenue sitesi C Blokdaire 7, göktürk, 34077İstanbul – Türkiye E: pazarlama@bemo.comW: www.bemo.com