Post on 03-Jul-2020
Eurocard
1
Automatic Transfer Tool User and Installation Guide Version 1.1, 2014
Eurocard
1
Table of Contents 1. Automatic Transfer Tool ............................................................................................................. 2
1.1 Purpose of document .......................................................................................................................... 2 1.2 System requirements and prerequisites ............................................................................................ 2 1.3 Definitions ............................................................................................................................................ 2
2 Getting started ............................................................................................................................. 3 3 Configuration ............................................................................................................................... 3
3.1 Log in to e-admin/e-view .................................................................................................................... 3 3.2 Configure Automatic Transfer Tool User ........................................................................................ 4 3.3 Download and install “Automatic transfer tool” ............................................................................. 7 3.4 Configure Automatic Transfer Tool ............................................................................................... 10
3.4.1 Start Automatic Transfer Tool ..................................................................................................... 10 3.4.2 Set user id and password .............................................................................................................. 11 3.4.3 Possible errors to the connectivity test ......................................................................................... 12
3.4.3.1 Error – No Connection ......................................................................................................................... 12 3.4.3.2 Error Authentication failed ................................................................................................................... 13
3.5 Configure Card Transfer ................................................................................................................. 14 3.5.1 Select destination directory and type for card transaction files ................................................... 16 3.5.2 Select types of transactions .......................................................................................................... 18 3.5.3 Select “Travel Expense Management” – TEM – system ............................................................. 19 3.5.4 Set backup and Transfer Options ................................................................................................. 20 3.5.5 Set schedule and filename for “Non Billed” advance transactions .............................................. 21
3.5.5.1 Configure a daily non billed transmission ............................................................................................ 21 3.5.5.2 Configure a weekly download .............................................................................................................. 22 3.5.5.3 Configure a monthly download ............................................................................................................ 23
3.5.6 Set schedule and filename for “Billed” transactions .................................................................... 24 3.5.7 Save Card configuration .............................................................................................................. 25 3.5.8 Possible Errors ............................................................................................................................. 26
3.6 Configure TAC Transfer .................................................................................................................. 27 3.6.1 Select destination directory and type for TAC transaction files .................................................. 29 3.6.2 Select types of transactions .......................................................................................................... 31 3.6.3 Select “Travel Expense Management” – TEM – system ............................................................. 32 3.6.4 Set backup and Transfer Options ................................................................................................. 33 3.6.5 Set schedule and filename for “Non Billed” transactions ............................................................ 34
3.6.5.1 Configure a daily non billed transmission ............................................................................................ 34 3.6.5.2 Configure a weekly download .............................................................................................................. 35 3.6.5.3 Configure a monthly download ............................................................................................................ 36
3.6.6 Set schedule and filename for “Billed” transactions .................................................................... 37 3.6.7 Save TAC configuration .............................................................................................................. 38
3.6.7.1 Possible Errors ...................................................................................................................................... 39 3.7 Run Transfers manually ................................................................................................................... 40
Eurocard
2
1. Automatic Transfer Tool
1.1 Purpose of document This document contains a User and Installation Guide for the Automatic Transfer Tool. Readers of this document should be aware of the e-admin/e-view application and know how to access it. For further information of the e-admin/e-view application please read the e-admin/e-view manual.
The document describes how to install and configure the Automatic Transfer Tool on a customer PC, Windows workstation or server. 1.2 System requirements and prerequisites The reader is expected to have access to e-admin/e-view as well as the Automatic Transfer Tool module.
The users of Automatic Transfer Tool should be configured by Eurocard.
In order to install the application on the PC “Local Administrative rights” will be required.
Further you need to have an internet connection, so you are able to communicate with e-admin/e-view.
The Automatic Transfer Tool has been tested with the following operating systems: Microsoft® Windows® 7.0 Microsoft® Windows® 8.0 Microsoft® Windows® 8.1 Microsoft® Windows® server 2003 SP2 Microsoft® Windows® server 2008 R2 Standard SP1 Microsoft® Windows® server 2012 R2 .NET freamework 4.0 Further the firewall must be open for TPC/IP port 53 and 443 In order to install the software to your PC and have space for transfer files required disk space is identified to 50 MB. 1.3 Definitions
Term Description Automatic Transfer Tool Administrator
A person with access to e-admin/e-view, who has the Automatic Transfer Administrator module
Automatic Transfer Tool User
A user id used as credentials by Automatic Transfer Tool to collect the relevant transactions from e-admin/e-view
Eurocard
3
2 Getting started An Automatic Transfer Tool agreement should be made between Eurocard and the customer.
When the agreement is signed, Eurocard will create user id(s) for both the Automatic Transfer Tool Administrator and the Automatic Transfer Tool User
The agreements states which arrangements (TAC, Card or both) the user should be linked to.
Eurocard will send a welcome mail to the Automatic Transfer Tool Administrator stating the 6 digit user id for accessing e-admin/e-view.
3 Configuration 1: Log in to e-admin/e-view.
2: Configure static password for the Automatic Transfer Tool User.
3: Download and install Automatic Transfer Tool Software. Please note that Local Admin rights are required and that you might need support from your IT–department for this.
4: Configure and test access to e-admin/e-view from the Automatic Transfer Tool. 3.1 Log in to e-admin/e-view
Eurocard
4
3.2 Configure Automatic Transfer Tool User Select File download .
Select the “Automatic transfer tool user manager” tab
.
Eurocard
5
Select relevant user, in this case 939314 and click the name of the user.
Passwords should… - be between 6 and 44 characters - not contain more than two identical characters in a row - contain the permitted characters a–z and 0–9 - differentiate between uppercase and lowercase letters - contain at least one number, but not more than three numbers in a row
Eurocard
6
Enter password and confirm password . Press save to store the password credentials for the Automatic Transfer Tool user”.
You should now see the following confirmation.
Eurocard
7
3.3 Download and install “Automatic transfer tool” Select “Download Automatic transfer tool application” and press save or run . It is advised that the program is installed on your local PC.
You will probably meet the following – choose ”Run”.
Eurocard
8
The InstallShield® Wizard will start – choose ”Next” to continue installation.
Click ”Install” to install the software.
Eurocard
9
Note that the application automatically will be stored in the Program Files directory, accessable through the Start Menu\All programs\AutomaticTransfer Click ”Finish” to complete the installation, and close the InstallShield Wizard.
After installation the Automatic Transfer will run automatically as a windows service – called ”Automatic Transfer”
If you later need to update the configuration you can open the Configuration dialogue Start Menu\All programs\AutomaticTransfer.
It is not necessary to have the configuration window open on the computer after installation.
Eurocard
10
3.4 Configure Automatic Transfer Tool 3.4.1 Start Automatic Transfer Tool Make sure that you are connected to the internet prior to this step.
Enter start programs ! all programs and locate the “Automatic Transfer Tool” – press enter
A screen like below should be shown with three menu items to the left “Connectivity”, “Card Transfer” and “Travel Account” – default will be Connectivity
Eurocard
11
3.4.2 Set user id and password Enter user id and password for the “Automatic Transfer Tool user” as you configured it in the e-admin/e-view.
Press “Save” to store the credentials
It is not preferable to have the same user-id/password on more than one PC/server, so in case you need to have it working on more than one PC/server, please order an extra user.
Eurocard
12
The application will now test the connection.
If successfull the line with ”Save” becomes green – this means that user id and password have been verified by contacting the e-admin/e-view service via the Internet.
If it becomes red – please look in the following section for possible error scenarios. 3.4.3 Possible errors to the connectivity test
3.4.3.1 Error – No Connection
If you get this message you are probably not able to connect to the e-admin/e-view Automatic Transfer Service – either due to no internet connection, perhaps access is blocked in your company’s firewall or other security policies stated by your company. Contact your local IT support initially to verify these matters.
Eurocard
13
Another reason could be that you are using a “proxy server”. The proxy gateway parameters can be configured in “Connectivity”.
3.4.3.2 Error Authentication failed
The user id and password entered do not match the ”Automatic Transfer Tool user” as given by Eurocard and configured in e-admin/e-view under “Automatic Transfer Tool user manager”.
Eurocard
14
3.5 Configure Card Transfer Configure the setup for credit card transfers by pressing the “Card Transfer” .
Eurocard
15
The Card Transfer configuration page is displayed.
Eurocard
16
The workflow for configuring Cards: 1: Select the destination directory (Section 3.5.1) 2: Select types of transaction in Card transaction files (Section 3.5.2) 3: Select your “Travel Expense Management” (TEM) system (Section 3.5.3) 4: Set backup and transfer options (Section 3.5.4) 5: Select schedule and filename for “Non billed” – advance transactions (Section 3.5.5) 6: Select schedule and filename for “Billed Transactions”. (Section 3.5.6) 7: Save the Cards configuration 3.5.1 Select destination directory and type for card transaction files
Enter the destination directory directly or press the “Explorer” button to browse for directory .
Eurocard
17
If you press the ”Explorer” then locate the applicable directory and press “OK”.
Eurocard
18
3.5.2 Select types of transactions
Select types of transaction by clicking in the tick boxes You can choose: – Purchase Transactions – recommended – Annual Fees – Payments – Transactions directed to account
Eurocard
19
3.5.3 Select “Travel Expense Management” – TEM – system
To make sure you get the file in the correct format. Select your Business Travel Expense Management system from the list.
Eurocard
20
3.5.4 Set backup and Transfer Options
You can choose to “Save empty transfer files” – most business systems prefer that a file arrives even though it is empty.
“Create dated backup files” is recommended if file import to your business system should fail, because then you have an archive of the downloaded file.
Please notice that if the file contains full cardnumber information, backup files should be deleted, when it has been imported into the Business Travel Expense Management System, to minimize the risk of card information being misused
Eurocard
21
3.5.5 Set schedule and filename for “Non Billed” advance transactions
Non billed transactions are transactions, which have not yet been presented on an invoice.
You can select a schedule on daily, weekly or monthly basis.
In addition set a “minimum starting date” – i.e. instruct the system not to download transactions older than a specific date, which can be of use when creating a cut over between two business systems.
You will only receive the transactions you have not yet downloaded.
3.5.5.1 Configure a daily non billed transmission
Activate non billed transactions and define transfer time – Eurocard recommends late night.
Enter the file name in the example MyNonBilledCards – don’t enter a file suffix like .DAT since it will automatically be added depending on business system
Eurocard
22
3.5.5.2 Configure a weekly download
Works just like a daily download, except for day of week is selected.
Eurocard
23
3.5.5.3 Configure a monthly download
Works just like a daily download, except that day of month is chosen from the drop down list.
Eurocard
24
3.5.6 Set schedule and filename for “Billed” transactions
If you would like a monthly transmission after billing then activate the billed transactions, select day of month to transfer.
Activate billed transactions, Transfer Time and Day of Month when the transfer should take place. Specify file name and minimum billing date.
Eurocard
25
3.5.7 Save Card configuration
Press the “Save” button to store the card transfer configuration.
Eurocard
26
If all validations pass, the line with “Save” becomes green.
3.5.8 Possible Errors
Invalid directory – non existing or not authorized.
Eurocard
27
3.6 Configure TAC Transfer Click the “Travel Account” to start configuration for Travel Account file delivery.
The Travel Account configuration page is displayed.
Eurocard
28
Eurocard
29
The workflow for configuring TAC will be: 1: Select the destination directory (Section 3.6.1) 2: Select types of transaction for the TAC transaction files (Section 3.6.2) 3: Select your “Travel Expense Management” (TEM) system (Section 3.6.3) 4: Set backup and transfer options (Section 3.6.4) 5: Select schedule and filename for “Non billed” – advance transactions (Section 3.6.5) 6: Select schedule and filename for “Billed Transactions” (Section 3.6.6) 7: Save the TAC configuration 3.6.1 Select destination directory and type for TAC transaction files
Enter the destination directory directly or press the “Explorer” button to browse for directory .
Eurocard
30
If you press the ”Explorer” then locate the applicable directory and press “OK”.
Eurocard
31
3.6.2 Select types of transactions
Select types of transaction by clicking in the tick boxes You can choose: – Purchase Transactions – recommended – Annual Fees – Payments – Transactions directed to account
Eurocard
32
3.6.3 Select “Travel Expense Management” – TEM – system
To make sure you get the file in the correct format. Select your Business Travel Expense Management system from the list.
Eurocard
33
3.6.4 Set backup and Transfer Options
You can choose to “Save empty transfer files” – most business systems prefer that a file arrives even though it is empty.
“Create dated backup files" is recommended if file import to your business system should fail, because then you have an archive of the downloaded files. Please notice that if the file contains full cardnumber information, backup files should be deleted when it has been imported into the Business Travel Expense Management System, to minimize the risk of card information being misused.
Eurocard
34
3.6.5 Set schedule and filename for “Non Billed” transactions
Non billed transactions are transactions, which have not yet been presented on an invoice.
You can select a schedule on daily, weekly or monthly basis.
In addition set a “minimum starting date” – i.e. instruct the system not to download transactions older than a specific date, which can be useful when creating a cut over between two business systems.
You will only receive the transactions you have not downloaded yet.
3.6.5.1 Configure a daily non billed transmission
Activate non billed transactions and define transfer time – Eurocard recommends late night.
Enter the file name in the example MyNonBilled – don’t enter a file suffix like .DAT since it will automatically be added depending on business system.
Eurocard
35
3.6.5.2 Configure a weekly download
Works just like a daily download, except for day of week is selected.
Eurocard
36
3.6.5.3 Configure a monthly download
Works just like a daily download, except that day of month is chosen from the drop down list.
Eurocard
37
3.6.6 Set schedule and filename for “Billed” transactions
If you would like a monthly transmission after billing, activate the billed transactions, select day of month to transfer.
Activate billed transactions, Transfer Time and Day of Month when the transfer should take place. Specify file name and minimum billing date.
Eurocard
38
3.6.7 Save TAC configuration
Press the “Save” button to store the TAC configuration.
Eurocard
39
If all validations pass, the line with “Save” becomes green.
3.6.7.1 Possible Errors
Invalid directory – non existing or not authorized.
Eurocard
40
3.7 Run Transfers manually Transfers run automatically according to the schedule entered in the configuration. If necessary they can be run manually by selecting the “Run Transfer Now” option.
After the download is completed the confirmation message box is displayed.