Post on 06-Nov-2021
ASSEMBLY INSTRUCTIONS Version 1.1EAGLE PLUS / BIRDIE PACKAGE
BEFORE YOU GET STARTED
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 2
THANK YOU for purchasing our SIM-IN-A-BOX package.
We're sure this package will provide you with years of enjoyment. Before getting started with assembly, please confirm the following to ensure your safety and those using your simulator:
Following these simple guidelines will ensure you get the most out of your purchase, the safest way possible.
Measure and confirm you have enough space to safely install and play. The final setup size of your simulator will be approximately 10 feet tall x 14 feet deep x 13 feet wide. Make sure you have extra space for the assembly process.
Make sure you have an assistant during the assembly process. The frame assembly requires TWO PEOPLE to safely complete.
Make sure you have all required and recommended tools to ensure a safe assembly and setup process.
CONTENTS INSIDE THE BOX
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 3
COMPONENTS ∙ (1) Frame Assembly System∙ (1) Front (Hitting) Screen∙ (1) Back Screen∙ (2) Inner Walls∙ (2) Outer Wall Covers∙ (1) Lid Panel∙ (1) Above Screen Panel∙ (1) Blackout Panel∙ (1) Rolling Computer Cart∙ (2) Rolls of Turf∙ (1) Hitting Mat and Tray System∙ (1) Simulation Optimized PC∙ (1) Wireless Keyboard/Trackpad ∙ (1) Projector with Power and HDMI Cables∙ (1) GCQuad or GC2 Launch Monitor
TOOLS ∙ (1) Ratchet with 3/4” Socket∙ (1) 15 Ft Steel Fish Tape (Roll)∙ (1) Zip Ties (Bundle)∙ (1) 15’ Ratcheting Rope∙ (1) Shock Cord
REQUIRED TOOLS & ITEMS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 4
REQUIRED TOOLS (NOT INCLUDED) ∙ (2) 6-8' Ladders
RECOMMENDED TOOLS (NOT INCLUDED) ∙ Impact Drill with 3/8" Impact Adapter∙ Snips for cutting Zip Ties∙ Work Gloves∙ Eye Protection Glasses
T A B L E O F C O N T E N T S
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 5
STEP 1: FRAME ASSEMBLY
STEP 2: TURF & SCREEN
STEP 3: EXTERIOR PANELS
STEP 4: COMPONENT SETUP
STEP 5: SOFTWARE SETUP
. . . . . . . . . . . . . . . . . Page 6
. . . . . . . . . . . . . . . . . Page 20
. . . . . . . . . . . . . . . . . Page 29
. . . . . . . . . . . . . . . . Page 37
. . . . . . . . . . . . . . . . . Page 46
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 6
Locate the ONE (1) Left Base (Grey Fiberglass) and the ONE (1) Rear Base Left Corner Support (Black Steel).
Connect the components at the corners marked with the PINK color code using the bolts and nuts pre-attached to the left base.
Sim-in-a-Box Installation Guide
Step One: Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal) and connect to the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel) (Horizontal).1A
1B
Left Base
Rear Base Left Corner Support
Sim-in-a-Box Installation Guide
Step One: Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal) and connect to the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel) (Horizontal).
Sim-in-a-Box Installation Guide
Step One: Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal) and connect to the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel) (Horizontal).
x 1
Step Two: Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 7
Locate the ONE (1) Rear Base Middle Support (Black Steel / No Velcro)
Connect to the step 1 assembly at the corners marked with the DARK BLUE color code using the bolts and nuts pre-attached to the Rear Base Left Corner Support.
2A
2B
Rear Base Middle Suppprt
Step Two: Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal).
Step Two: Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal).
x 1
Step Three: Connect the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Tan Rear Base Right Corner Support (Black Steel - No Velcro) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 8
Locate the ONE (1) Rear Base Right Corner Support (Black Steel / No Velcro)
Connect to the step 2 assembly at the corners marked with the DARK BLUE color code using the bolts and nuts pre-attached to the Base Right Corner Support.
3A
3B
Rear Base Right Corner Support
Step Two: Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal).
Step Two: Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal).
x 1
Step Four: Connect the Dark Blue/Tan Rear Base Right Corner Support (Black Steel - No Velcro) (Horizontal) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 9
Locate the ONE (1) Right Base (Grey Fiberglass).
Connect to the step 3 assembly at the corners marked with the TAN color code using the bolts and nuts pre-attached to the Right Base.
4A
4B
Right Base
Step Four: Connect the Dark Blue/Tan Rear Base Right Corner Support (Black Steel - No Velcro) (Horizontal) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Step Four: Connect the Dark Blue/Tan Rear Base Right Corner Support (Black Steel - No Velcro) (Horizontal) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
x 1
Step Five: Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal). STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 10
Locate the TWO (2) Rear Side Wall Bottom Supports (Grey Fiberglass).Note: Velcro LOOP on the outside edge, velcro HOOK on the back edge.
Connect to the step 4 assembly at the corners marked with the PURPLE color code using the bolts and nuts pre-attached to the Left Base and Right Base.
5A
5B
Rear Side Wall Bottom Supports (x2)
Step Five: Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal). Step Five: Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal).
x 2
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 11
The frame assembly should now look like this:
Step Five: Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 12
Locate the TWO (2) Rear Side Wall Top Supports (Grey Fiberglass).6A
6B
Step Six: Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Step Six: Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Step Six: Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Step Six: Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Rear RIGHT SIDE Wall Top Supports
Rear LEFT SIDE Wall Top Supports
Connect to the step 5 assembly at the Rear Side Wall Bottom Supports marked with the LIGHT BLUE color code using the bolts and nuts pre-attached to the Wall Top Supports
When finished, the assembly should look like this
Step Five: Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal). Step Five: Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal).
x 2
Step Seven: Connect the White/Dark Blue Rear Top Frame Left Corner Support (Black Steel - With Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Top Frame Middle Support (Black Steel - With Velcro) (Horizontal).
Then, connect the Dark Blue/Dark Blue Rear Top Frame Middle Support (Black Steel - With Velcro) (Horizontal) to the Dark Blue/Pink Rear Top Frame Right Corner Support (Black Steel - With Velcro) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 13
Locate the THREE (3) Rear Top Frame Support components (Black Steel with Velcro).
Connect the Rear Top Frame Support components as illustrated using the pre-attached bolts and nuts.
7A
7B
Rear Top Frame LEFT CORNER Support
Rear Top Frame MIDDLE Support
Rear Top Frame RIGHT CORNER Support
Step Two: Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal).
Step Two: Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal).
Step Two: Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal).
Step Two: Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 14
Attach the assembled Rear Top Frame Support to the main assemblyas illustrated using the pre-attached bolts and nuts.
8
REQUIRED FOR THIS STEP
X 2
Sim-in-a-Box Installation G
uide
Step One:
Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (H
orizontal) and connect to the Light Pink/Dark Blue Rear Base Left C
orner Support (Black Steel) (Horizontal).
Sim-in-a-Box Installation G
uide
Step One:
Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (H
orizontal) and connect to the Light Pink/Dark Blue Rear Base Left C
orner Support (Black Steel) (Horizontal).
Step Seven: Connect the White/Dark Blue Rear Top Frame Left Corner Support (Black Steel - With Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Top Frame Middle Support (Black Steel - With Velcro) (Horizontal).
Then, connect the Dark Blue/Dark Blue Rear Top Frame Middle Support (Black Steel - With Velcro) (Horizontal) to the Dark Blue/Pink Rear Top Frame Right Corner Support (Black Steel - With Velcro) (Horizontal).Step Seven: Connect the White/Dark Blue Rear Top Frame Left Corner Support (Black Steel - With Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Top Frame Middle Support (Black Steel - With Velcro) (Horizontal).
Then, connect the Dark Blue/Dark Blue Rear Top Frame Middle Support (Black Steel - With Velcro) (Horizontal) to the Dark Blue/Pink Rear Top Frame Right Corner Support (Black Steel - With Velcro) (Horizontal).
Step Nine: Connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 15
Locate the TWO (2) Top Side Frame Supports (Grey Fiberglass).9A
9BConnect the Top Side Frame Supports as illustrated using the pre-attached bolts and nuts.
Step Nine: Connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical).
LEFT Top Side Frame Support
RIGHT Top Side Frame Support
REQUIRED FOR THIS STEP
X 1
Step
Sev
en:
Con
nect
the
Whi
te/D
ark
Blue
Rea
r Top
Fra
me
Left
Cor
ner S
uppo
rt (B
lack
Ste
el -
With
Ve
lcro
) (H
orizo
ntal
) to
the
Dark
Blu
e/Da
rk B
lue
Rear
Top
Fra
me
Mid
dle
Supp
ort (
Blac
k St
eel -
With
Vel
cro)
(Hor
izont
al).
Then
, con
nect
the
Dark
Blu
e/Da
rk B
lue
Rear
Top
Fra
me
Mid
dle
Supp
ort (
Blac
k St
eel -
W
ith V
elcr
o) (H
orizo
ntal
) to
the
Dark
Blu
e/Pi
nk R
ear T
op F
ram
e Ri
ght C
orne
r Sup
port
(Bla
ck S
teel
- W
ith V
elcr
o) (H
orizo
ntal
).St
ep S
even
: C
onne
ct th
e W
hite
/Dar
k Bl
ue R
ear T
op F
ram
e Le
ft C
orne
r Sup
port
(Bla
ck S
teel
- W
ith
Velc
ro) (
Hor
izont
al) t
o th
e Da
rk B
lue/
Dark
Blu
e Re
ar T
op F
ram
e M
iddl
e Su
ppor
t (Bl
ack
Stee
l - W
ith V
elcr
o) (H
orizo
ntal
).
Then
, con
nect
the
Dark
Blu
e/Da
rk B
lue
Rear
Top
Fra
me
Mid
dle
Supp
ort (
Blac
k St
eel -
W
ith V
elcr
o) (H
orizo
ntal
) to
the
Dark
Blu
e/Pi
nk R
ear T
op F
ram
e Ri
ght C
orne
r Sup
port
(Bla
ck S
teel
- W
ith V
elcr
o) (H
orizo
ntal
).
Sim-in-a-Box Installation Guide
Step One: Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal) and connect to the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel) (Horizontal).
Sim-in-a-Box Installation Guide
Step One: Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal) and connect to the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 16
Locate the TWO (2) Side Wall Bottom Supports (Grey Fiberglass).Note: Velcro HOOK on the outside edge.
10A
10BConnect ONE (1) Side Wall Bottom Support to the Left Base and ONE (1) Side Wall Bottom Support to the Right Base as illustrated using the pre-attached bolts and nuts.
REQUIRED FOR THIS STEP
X 1
Step Ten: Connect One Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal).
Step Ten: Connect One Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal).
Step
Ten
: C
onne
ct O
ne R
ed/L
ight
Blu
e Fr
ont R
ight
Sid
e W
all B
otto
m S
uppo
rt (G
rey
Fibe
rgla
ss)
(Ver
tical
) to
the
Red/
Purp
le/T
an R
ight
Bas
e (G
rey
Fibe
rgla
ss) (
Hor
izont
al).
Then
, con
nect
One
Red
/Lig
ht B
lue
Fron
t Lef
t Sid
e W
all B
otto
m S
uppo
rt (G
rey
Fibe
rgla
ss) (
Verti
cal)
to th
e Re
d/Pu
rple
/Lig
ht P
ink
Left
Base
(Gre
y Fi
berg
lass
) (H
orizo
ntal
).
Step
Ten
: C
onne
ct O
ne R
ed/L
ight
Blu
e Fr
ont R
ight
Sid
e W
all B
otto
m S
uppo
rt (G
rey
Fibe
rgla
ss)
(Ver
tical
) to
the
Red/
Purp
le/T
an R
ight
Bas
e (G
rey
Fibe
rgla
ss) (
Hor
izont
al).
Then
, con
nect
One
Red
/Lig
ht B
lue
Fron
t Lef
t Sid
e W
all B
otto
m S
uppo
rt (G
rey
Fibe
rgla
ss) (
Verti
cal)
to th
e Re
d/Pu
rple
/Lig
ht P
ink
Left
Base
(Gre
y Fi
berg
lass
) (H
orizo
ntal
).
Step
Ten
: C
onne
ct O
ne R
ed/L
ight
Blu
e Fr
ont R
ight
Sid
e W
all B
otto
m S
uppo
rt (G
rey
Fibe
rgla
ss)
(Ver
tical
) to
the
Red/
Purp
le/T
an R
ight
Bas
e (G
rey
Fibe
rgla
ss) (
Hor
izont
al).
Then
, con
nect
One
Red
/Lig
ht B
lue
Fron
t Lef
t Sid
e W
all B
otto
m S
uppo
rt (G
rey
Fibe
rgla
ss) (
Verti
cal)
to th
e Re
d/Pu
rple
/Lig
ht P
ink
Left
Base
(Gre
y Fi
berg
lass
) (H
orizo
ntal
).
Step
Ten
: C
onne
ct O
ne R
ed/L
ight
Blu
e Fr
ont R
ight
Sid
e W
all B
otto
m S
uppo
rt (G
rey
Fibe
rgla
ss)
(Ver
tical
) to
the
Red/
Purp
le/T
an R
ight
Bas
e (G
rey
Fibe
rgla
ss) (
Hor
izont
al).
Then
, con
nect
One
Red
/Lig
ht B
lue
Fron
t Lef
t Sid
e W
all B
otto
m S
uppo
rt (G
rey
Fibe
rgla
ss) (
Verti
cal)
to th
e Re
d/Pu
rple
/Lig
ht P
ink
Left
Base
(Gre
y Fi
berg
lass
) (H
orizo
ntal
).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 17
Locate the TWO (2) Side Wall Top Supports (Grey Fiberglass).11A
11BConnect the Top Side Wall Supports as illustrated in the noted order using the pre-attached bolts and nuts.
REQUIRED FOR THIS STEP
X 1
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
Step Six: Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Step Six: Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Step Six: Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Step Six: Connect the Pink/Light Blue Rear Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Light Blue Rear Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Front LEFT SIDE Wall Top Supports
Front RIGHT SIDE Wall Top Supports
Step Five: Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal).
Step Five: Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal). Step Five:
Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal).
Step Five: Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal).
CONNECTFIRST
CONNECTFIRST
CONNECTSECOND
CONNECTSECOND
Step Twelve: Connect the Yellow/Black Front Top Frame Left Corner Support (Grey Fiberglass) (Horizontal) to the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal).
Then, connect the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal) to the Black/Green Front Top Frame Right Corner Support (Grey Fiberglass) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 18
Locate the THREE (3) Front Top Frame Support components (Black Steel with Velcro).
Connect the Front Top Frame Support components as illustrated using the pre-attached bolts and nuts.
12A
12B
Front Top Frame LEFT CORNER Support
Front Top Frame MIDDLE Support
Front Top Frame RIGHT CORNER Support
Step Twelve: Connect the Yellow/Black Front Top Frame Left Corner Support (Grey Fiberglass) (Horizontal) to the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal).
Then, connect the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal) to the Black/Green Front Top Frame Right Corner Support (Grey Fiberglass) (Horizontal).
Step Twelve: Connect the Yellow/Black Front Top Frame Left Corner Support (Grey Fiberglass) (Horizontal) to the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal).
Then, connect the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal) to the Black/Green Front Top Frame Right Corner Support (Grey Fiberglass) (Horizontal).
Step Twelve: Connect the Yellow/Black Front Top Frame Left Corner Support (Grey Fiberglass) (Horizontal) to the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal).
Then, connect the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal) to the Black/Green Front Top Frame Right Corner Support (Grey Fiberglass) (Horizontal).
Step Twelve: Connect the Yellow/Black Front Top Frame Left Corner Support (Grey Fiberglass) (Horizontal) to the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal).
Then, connect the Black/Black Front Top Frame Middle Support (Grey Fiberglass) (Horizontal) to the Black/Green Front Top Frame Right Corner Support (Grey Fiberglass) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 19
Attach the assembled Front Top Frame Support to the main assemblyas illustrated using the pre-attached bolts and nuts.
13
REQUIRED FOR THIS STEP
DOUBLE-CHECK!
With the frame now assembled, please re-check that all assembly bolts are tight and the frame is stable and rigid.
X 2
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
Step Eleven: Connect the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Left Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the White/Yellow Left Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Yellow/Light Blue Front Left Side Wall Top Support (Grey Fiberglass) (Vertical).
Connect the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical) to the Red/Light Blue Front Right Side Wall Bottom Support (Grey Fiberglass) (Vertical).
Then, connect the Pink/Green Right Top Side Frame Support (Grey Fiberglass) (Horizontal) to the Green/Light Blue Front Right Side Wall Top Support (Grey Fiberglass) (Vertical).
STEP 2: TURF & SCREEN
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 20
Locate the Interior Turf Roll and place it inside the assembled frame. NOTE: Make sure the assembled frame and interior turf are in their final playing position.
1
STEP 2: TURF & SCREEN
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 21
Locate the Mesh Screen Backing and the Top Attachment Cord.
Attach the Top Attachment Cord to the frame by placing the hook into the steel eye hook located on the inside top of the rear LEFT support as shown.
2
REQUIRED FOR THIS STEP
X 1
STEP 2: TURF & SCREEN
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 22
Unfold the Mesh Screen Backing and thread the Top Attachment Cord through the top row of grommet holes STARTING WITH THE SECOND HOLE as shown. Thread the Top Attachment Cord through all grommet holes BUT NOT the final grommet hole.
With the Top Attachment Cord threaded, locate the separate attachment hook and tie it onto the end. Make sure the knot is propoerly tight and secure.
3A
3B
REQUIRED FOR THIS STEP
X 1
Make sure the vertical strips of velcro are facing forward.
STEP 2: TURF & SCREEN
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 23
Attach the Top Attachment Cord to the frame by placing the hook into the steel eye hook located on the inside top of the rear RIGHT support as shown.
Tighten the Top Attachment Cord by pulling on the loose end located on the left side. The included pulley system will prevent the cord from loosening once pulled.
4A
4B
REQUIRED FOR THIS STEP
X 1
STEP 2: TURF & SCREEN
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 24
With the Top Attachment Cord pulled tight and the Mesh Screen Backing spread out evenly, locate the two (2) provided Zip Ties and secure the OUTER grommet holes of the Mesh Screen Backing to the steel eye hooks holding the Top Attachment Cord on each side of the frame.
Once attached, make sure the two Zip Ties are secured tightly.
5A
5B
REQUIRED FOR THIS STEP
X 1
STEP 2: TURF & SCREEN
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 25
Locate the long Zip Tie provided and place it around both the center of the Rear Top Frame Support and the Top Attachment Cord as illustrated below.
6A
6B
REQUIRED FOR THIS STEP
X 1
Use Zip Tie to raise the Mesh Screen Backing until it is LEVEL with both sides, and then secure as shown.
STEP 2: TURF & SCREEN
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 26
Secure the Mesh Screen Backing to the Frame Assembly by attaching the vertical velcro edges on each side of the Mesh Screen Backing to the vertical velcro edges on the back of the both rear frame support columns.
7
REQUIRED FOR THIS STEP
X 1
STEP 2: TURF & SCREEN
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 27
Using the provided wire feeder, feed the Bottom Attachment Cord through the bottom edge sleeve of the Mesh Screen Backing as illustrated.
Tie the Bottom Attachment Cord securely to the lower LEFT steel eye hook, then pull the cord on the RIGHT until there is a small amount of tension on the cord before securing to the lower RIGHT steel eye hook.
8A
8B
REQUIRED FOR THIS STEP
X 1
STEP 2: TURF & SCREEN
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 28
It is now time to attach the Hitting Screen to the Mesh Screen Backing. To begin,first unfold the Hitting Screen and align the upper right hand corner to the velcro strips on the upper right hand corner of the Mesh Screen Backing and press firmly. Continue by attaching the velcro outward along the horizontal and vertical strips, being careful to maintain a straight alignment without wrinkles.
Note: When disassembling, use care as not to tear the back screen.
When finished, the hitting screen should be level and flat, without noticeable wrinkles. Should any wrinkles be present, adjust the velcro attachment around the problem area.
9
REQUIRED FOR THIS STEP
X 1
STEP 3: EXTERIOR PANELS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 29
Locate the (1) Outer Lid Panel and attach to the outside top of the Frame Assembly using the velcro strips on each end. Align flush with the SIDES and BACK of the Frame Assembly.
Once the Lid Panel is properly aligned and secure, remove the protective strip covering the velcro running along the (under side) front edge.
1A
1B
REQUIRED FOR THIS STEP
X 2
STEP 3: EXTERIOR PANELS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 30
Pull the front edge of the Outer Lid Panel over and around the front bar of the Frame Assembly with even pressure and secure it to the underside surface using the velcro strip.
1C
REQUIRED FOR THIS STEP
X 1
STEP 3: EXTERIOR PANELS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 31
Locate the (2) Inner Side Panels. Attach the LEFT Inner Side Panel to the inside top left of the Frame Assembly using the velcro strip. Align the lid panel flush with the BACK edge of the Frame Assembly. Approximately six (6) inches of the Left Side Panel should stick out beyond the front of the frame.
Once the Side Panel is properly aligned and secure, remove the protective strip covering the velcro running along the (outside) front edge.
2A
2B
REQUIRED FOR THIS STEP
X 1
STEP 3: EXTERIOR PANELS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 32
Pull the front edge of the Inner Side Panel over and around the side bar of the Frame Assembly with even pressure and secure it to the outside surface using the velcro strip.
REPEAT Steps 2A - 2C with the RIGHT Inner Side Panel.
2C
2D
REQUIRED FOR THIS STEP
X 1
STEP 3: EXTERIOR PANELS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 33
Locate the (1) Above Screen Panel and attach to the top edge of the Hitting Screen using the velcro strip, aligning flush with the top edge of the hitting screen as illustrated below.
Once the Above Screen Panel is properly aligned and secured to the top edge of the Hitting Screen, remove the protective strips covering the velcro running along the front and side edges.
3A
3B
REQUIRED FOR THIS STEP
X 1
STEP 3: EXTERIOR PANELS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 34
Starting in the center, attach the Above Screen Panel to the Lid Panel using the velcro strip, being careful to keep the edge straight and smooth as you move to each corner. Secure the side strips of velcro to the Inner Side panels to insure a tight, smooth fit.
3C
REQUIRED FOR THIS STEP
X 1
STEP 3: EXTERIOR PANELS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 35
Locate the (2) Outer Side Panels. Starting at the top, attach the LEFT Outer Side Panel to the outside top left of the Frame Assembly using the velcro strip. Align the panel flush with all edges before attaching the panel down the front and back edges, being careful to keep the edges straight and smooth as you move downward.
4A
4B
REQUIRED FOR THIS STEP
X 1
REPEAT Step 4A with the RIGHT Outer Side Panel.
STEP 3: EXTERIOR PANELS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 36
Locate the (1) Blackout Panel and move it to the back side of the frame assembly. Starting at one end, attach the Blackout Panel to the outside top corner of the Frame Assembly using the velcro strip. Align the panel flush with the top edge before attaching the panel down each side edge, being careful to keep the edges straight and smooth as you move downward.
5
(Back of Frame Assembly)
REQUIRED FOR THIS STEP
X 1
Congratulations!The Frame Assembly is now complete!
STEP 4: COMPONENT SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 37
Locate the second (outer) Turf Roll and unroll & position it in front of the first (inner) Turf Roll.1
STEP 4: COMPONENT SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 38
Follow the separately included instructions for the assembly of the Hitting Mat.
Follow the separately included instructions for the assembly of the Rolling Computer Cart.
2
3
STEP 4: COMPONENT SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 39
Place the Rolling Computer Cart in the correct position based on player handedness.
RIGHT-HANDED Player Position(most common)
LEFT-HANDEDPlayer Position(less common)
3B
STEP 4: COMPONENT SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 40
Place the computer, Mouse/Keyboard, and Projector on the Rolling Computer Cart as shown.Then connect the following: ∙ Connect the projector to the Computer using the provided HDMI cable. ∙ Connect the Wireless Mouse/Keyboard to the Computer via BlueTooth. ∙ Connect the Computer to the internet via Ethernet, or connect via WiFi if available. ∙ Connect power cords to Computer and Projector and connect to power supply.
4
WALLPORT
Keyboard& Mouse
Projector
Computer
CENTER LINE
HITTING SCREEN
STEP 4: COMPONENT SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 41
Place the Launch Monitor on the Hitting Mat.
Using a measurring tape, find the center line of the Turf & Hitting Mat. Placement of the launch monitors should be:
from screen from centerlineGCQuad 9' 5" 1' 10"GC2 9' 5" 1' 6"
5
STEP 4: COMPONENT SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 42
Connect the Launch Monitor to the Computer using the provided USB Cord. Connect the Launch Monitor to a power source using the provided Power Cord.
6
GCQuad
GC2If your package comes with theGCQuad, you may also connect to the computer via Ethernet or WiFi. Please see the GCQuad user manual for more details.
Additional Connection Options
STEP 4: COMPONENT SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 43
Power ON the Launch Monitor, Computer, and Projector. 7
STEP 4: COMPONENT SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 44
With the Projector on and projecting an image, move the Rolling Computer Cart toward the Hitting Screen until the image covers ALL FOUR CORNERS of the screen.
8
STEP 4: COMPONENT SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 45
Use the Projector’s included remote to calibrate the projector, including aligning the corners of the projected image with the screen (using the KEYSTONING feature).
9
STEP 5: SOFTWARE SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 46
Power on the computer and navigate to the Windows desktop.Locate the Foresight Sports Software icon on the desktop and double click to launch. Important! If you FSX Live username and password had been created and provided to your Foresight Sports representative, then we have activated your software and assigned your courses to your username. If you have not done this, please follow the steps below: Your computer is optimized for our FSX software suite. FSX 2018, golf courses, and Fairgrounds have already been installed - to get started, you must first complete your user registration by visiting FSX Live at: performance.foresightsports.com, then open your FSX 2018 software. All that’s left is to activate the courses with our Order Fulfillment team!
When you’re ready to activate your golf courses, please make sure you have registered for your FREE FSX Live account. Once you’ve created your FSX Live account, please email our Order Fulfillment team at orderfulfillment@foresightsports.com with the subject line “Sim-in-a-Box Course Activation” and the following information in the body of the email:
You’ll receive an email confirmation when your courses are activated.
*This information can be found on the Setup Insert inside your box.
1
FSX Live usernameEmail registered with FSX Live
Sales order number*FSX 2018 activation code*
STEP 5: SOFTWARE SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 47
2 Launch the Foresight Sports Software. PLEASE NOTE: This software requires internet access to validate. Internet access will also allow your software to communicate to the Foresight cloud for additional FSX LIVE features.
If you do not have regular internet access, you may setup your software to utilize offline hours using these instructions: www.foresightsports.com/fsx-2018-offline-hours-activation
Connect the Launch Monitor.Upon launching the software, you may now connect to the Launch Monitor by following these steps: 1) Locate the setting icon (Usually a Gear Icon). 2) Open the "Devices" tab (Be sure you device is powered on and connected to the computer using the USB Cable). 3) Select your launch monitor's Serial Number and select "CONNECT". If your launch monitor's Serial Number does not appear, select "FILTERS" then select "USB". The launch monitor should now appear. 4) If you have any issues, a detailed Connection Guide can be found at: https://www.foresightsports.com/fsx-2018-connection-guide.
3
STEP 5: SOFTWARE SETUP
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 48
Navigating the Software.With the Launch Monitor now connected, you may begin navigating and using the software. For detailed information on the FSX software, please use the resources below: FSX Live User Guide: www.foresightsports.com/fsx-2018-user-manual Foresight Fairgrounds: www.foresightsports.com/foresight-fairgrounds-user-manual
All support information can be found by scanning the QR Code below:
4
www.foresightsports.com/library