Post on 09-Apr-2018
control biogen filter papers & glass fibers PFB004-11
Ashless Quantitative Filter papers Ashless filters (approx. 0.007%), recommended for quantitative analysis.
For routine gravimetric analysis and the preparation of samples for instrumental analysis requires high purity. Our filter papers are being washed out with acid to meet this critical requirement. Our quantitative filter papers are available in two types – ashless and ashless hardened. Our ashless grades are made of 100% cotton linters with an ash content of 0.007% The ashless hardened grades are made of pure cellulose with an alpha cellulose content of almost 100%
Filters Characteristics:
Values Herzberg obtained with 50mm water column. Weight per unit area as per DIN 53103 and ISO 536 Ash content : lower or equal to 0.006% DIN 54370
Applications for quantitative ashless filters
Grade QT1: For analytical procedures involving coarse particles or gelatinous precipitate such as iron Fe(OH)3,
aluminum Al(OH)3 , chromium hydroxide Cr(OH)3 and others. Si-determination SiO2 in steel and pig iron analysis. Determination of heavy metals in water analysis. Determination of ash content and pesticide contamination such as PCB. Grade QT2: Determination of the sand content in foodstuffs. Determination of the grade of flour. Analysis of aqueous suspensions in the paper industry. Analysis of alkaline carbonates. Cement industry (Blaine test)
Grade Filtration Properties Color Code
Weight g/m2
Filtration Herzberg s/100ml
Herzberg ml/min
Retention Rate μm
Ash Content %
QT1 Fast 84 70 850 15 ~ 20 0,006
QT2 Medium Fast 84 150 375 10 ~ 12 0,006
QT4 Medium to fast 84 450 130 5 ~ 8 0,006
QT5 Slow to Medium 84 1200 50 3 ~ 5 0,006
QT6 Slow 100 850 70 1 ~ 3 0,006
QT3 Slow (thin) 100 3500 17 1 ~ 2 0,006
control biogen filter papers & glass fibers PFB004-11
Grade QT3:
Slow filter paper with highest efficiency for collecting very small particles such as barium sulphate, and cuprous oxide.
Determination of Phosphatase activity in dairy products. Determination of the amount of insoluble contaminants in animal and vegetable fats and oils.
Grade QT4:
Filtration of medium size precipitates. Determination of magnetic metal particulate and heavy filth in prepared meat.
Also use in the determination of the amount of insoluble contaminants in animal and vegetable fats and
oils.
Grade QT5:
Medium speed filter for fine crystalline precipitates. Determination of fats and oils in water. General gravimetric analysis for many components in cements, soil, iron, etc.
Grade QT6:
Slow speed grade. Presents the same characteristics as QT3 but a little heavier.
Ordering Information
Grade QT1 QT2 QT4 QT5 QT6 QT3
Ø mm Fast Medium Fast Medium fast Medium Slow Slow Slow (thin)
55 QT1.055 QT2.055 QT3.055 QT5.055 QT6.055 QT3.055
70 QT1.070 QT2.070 QT3.070 QT5.070 QT6.070 QT3.070
90 QT1.090 QT2.090 QT3.090 QT5.090 QT6.090 QT3.090
110 QT1.110 QT2.110 QT3.110 QT5.110 QT6.110 QT3.110
125 QT1.125 QT2.125 QT3.125 QT5.125 QT6.125 QT3.125
150 QT1.150 QT2.150 QT3.150 QT5.150 QT6.150 QT3.150
185 QT1.185 QT2.185 QT3.185 QT5.185 QT6.185 QT3.185
240 QT1.240 QT2.240 QT3.240 QT5.240 QT6.240 QT3.240
470 x 470 QT147471 QT247471 QT347471 QT547471 QT647471 QT347471 Grades QT2 – QT6: Presentation 100 pcs. / box. Grade QT1 = 50 pcs / box. Also available in pleated format in diameters of 90 to 500 mm. Other format available.
control biogen filter papers & glass fibers PFB004-11
Hardened Ashless Quantitative Filter papers Recommended for applications where mechanical strength is required and for use with acid or alkaline solutions. Ash content lower or equal to 0.006%
Features:
Acid washed for high purity. Made of pure cellulose with an alpha cellulose content of almost 100% Offer more resistance to harsh solutions like acids and alkaline solutions. Combine strength with analytical grade filters performance.
Filters Characteristics:
Grade Filtration Properties Weight
g/m2
Filtration Herzberg s/100ml
Herzberg ml/min
Retention Rate μm
Ash Content %
QTH1 fast 84 70 850 12 - 15 0,006
QTH2 Medium to fast 84 150 375 8 - 12 0,006
QTH4 Medium 84 450 130 5 - 8 0,006
QTH5 Slow to medium 84 1200 50 3 - 5 0,006
QTH3 Slow 100 3500 17 1 - 2 0,006 Values Herzberg obtained with 50mm water column. Weight per unit area as per DIN 53103 and ISO 536 Ash content : lower or equal to 0.007% DIN 54370
Applications for hardened quantitative ashless filters
Grade QTH1: For analytical procedures involving coarse particles or gelatinous precipitate such as iron Fe(OH)3,
aluminum Al(OH)3 , chromium hydroxide Cr(OH)3 and others. Determination of heavy metals in water analysis. Determination of ash content and pesticide contamination such as PCB. Cement analysis. Grade QTH2: Determination of contaminant content in foodstuffs. Determination of the grade of flour. Analysis of aqueous suspensions in the paper industry. Analysis of alkaline carbonates. Cement industry (Blaine test)
Grade QTH3:
Slow filter paper with highest efficiency for collecting very small particles.
Gravimetric analysis for metals such as barium sulphate, cuprous oxide, lead and others. Determination of the amount of insoluble contaminants in animal and vegetable fats and oils.
control biogen filter papers & glass fibers FPB004-11
Grade QTH4:
Filtration of medium size precipitates
Also use in the determination of the amount of insoluble contaminants in animal and vegetable fats and
oils.
Grade QTH5:
Medium speed filter for fine crystalline precipitates. Refractive Index of soluble solids in food stuff. Determination of fats and oils in water. General gravimetric analysis for many components in cements, soil, iron, etc.
Ordering Information
Grade QTH1 QTH2 QTH4 QTH5 QTH6 QTH3
Ø mm Fast Medium Fast Medium fast Medium Slow Slow Slow (thin)
55 QTH1.055 QTH2.055 QTH3.055 QTH5.055 QTH6.055 QTH3.055
70 QTH1.070 QTH2.070 QTH3.070 QTH5.070 QTH6.070 QTH3.070
90 QTH1.090 QTH2.090 QTH3.090 QTH5.090 QTH6.090 QTH3.090
110 QTH1.110 QTH2.110 QTH3.110 QTH5.110 QTH6.110 QTH3.110
125 QTH1.125 QTH2.125 QTH3.125 QTH5.125 QTH6.125 QTH3.125
150 QTH1.150 QTH2.150 QTH3.150 QTH5.150 QTH6.150 QTH3.150
185 QTH1.185 QTH2.185 QTH3.185 QTH5.185 QTH6.185 QTH3.185
240 QTH1.240 QTH2.240 QTH3.240 QTH5.240 QTH6.240 QTH3.240
580 X 580 QTH15858 QTH25858 QTH35858 QTH55858 QTH5858 QTH35858
Presentation 100 pcs. / box. Also available in pleated format in diameters of 90 to 500 mm. Other formats available.
control biogen filter papers & glass fibers FPB004-11
High Purity Qualitative Filter Paper
Our extremely pure filter paper grades are made of pure cotton pulp. The ash content of our grades is of approximately 0.06%.
Features:
Intermediary filters between Quantitative and General Use filters. Made of 100% pure cotton pulp. Low ash content (approx. 0.06%) Available in disc or pleated format for more capacity, surface and filtration speed.
Filters Characteristics:
Grade Filtration Properties Weight g/m2
Filtration Herzberg s/100ml
Herzberg ml/min
Retention Rate μm
Ash Content %
300 Very Fast 130 60 1000 > 20 0.06
301 Fast 90 85 700 > 10 0.06
302 Medium to fast 90 130 450 8 - 10 0.06
303 Medium slow 85 300 200 5 - 8 0.06
304 Slow 100 750 80 3 - 5 0.06
305 Very Slow 80 1500 40 1 - 2 0.06 Values Herzberg obtained with 50mm water column. Weight per unit area as per DIN 53103 and ISO 536 Ash content : Average value - lower or equal to 0.06%
General applications:
Clarifications of liquids for qualitative analysis. Filtration of precipitates, such as calcium oxalate, lead sulphate and calcium carbonate. Seed testing and soil analysis. Wipes and gas detection monitors. Filtration of buffers and dyes.
Grade 300:
Our fastest filter. Filtration of coarse precipitates or particulates. General laboratory filtration. Clarification of fluids. Higher load capacity. Available in pleated format to combine loading
capacity and filtration speed.
Grade 301:
Fast filtration of medium size particulates above 10 μm.
Available in pleated format to combines loading capacity and filtration speed.
control biogen filter papers & glass fibers FPB004-11
Grade 302:
Medium to fast filtration of coarse particulates. Of general use for qualitative analytical
separations for precipitates such as lead sulfate, calcium oxalate (hot), and calcium carbonate.
Soil analysis and seed testing procedures. Routine techniques to separate solid foodstuffs
from associated liquid or extracting liquid. Education grade for teaching simple qualitative
analytical separations.
Grade 303:
Medium speed filter for the filtration of fine particles precipitates.
Determination of lipids. Qualitative analytical separations for precipitates
such as lead sulfate, calcium oxalate (hot), and calcium carbonate.
Soil analysis and seed testing procedures. Routine techniques in the food industry.
Grade 304:
Slower filter for medium to fine filtration. Higher load capacity. Combine the resistance given to thicker paper
with a good retention capacity. Available in pleated format for increased loading
capacity. Used in the determination of fat content or
removal of carbon dioxide and turbidity from beverages.
Grade 305:
Our slowest filter with the highest retention in the range of 1 to 2 μm.
Used in qualitative analysis of organic compounds such as residual sugar.
Refractometric analysis.
Ordering Information
Grade 300 301 302 303 304 305
Ø mm Very fast Fast Medium to
fast Medium Slow Very Slow
55 QL300.055 QL301.055 QL302.055 QL303.055 QL304.055 QL305.055
70 QL300.070 QL301.070 QL302.070 QL303.070 QL304.070 QL305.070
90 QL300.090 QL301.090 QL302.090 QL303.090 QL304.090 QL305.090
110 QL300.110 QL301.110 QL302.110 QL303.110 QL304.110 QL305.110
125 QL300.125 QL301.125 QL302.125 QL303.125 QL304.125 QL305.125
150 QL300.150 QL301.150 QL302.150 QL303.150 QL304.150 QL305.150
185 QL300.185 QL301.185 QL302.185 QL303.185 QL304.185 QL305.185
240 QL300.240 QL301.240 QL302.240 QL303.240 QL304.240 QL305.240
320 QL300.320 QL301.320 QL305.320
480 x 480 3004848 3054848
Pleated filters High Purity Qualitative
Grade 300 301 302 303 304 305
Ø mm Very fast Fast Medium to
fast Medium Slow Very Slow
125 QLF300.125 QLF301.125 QLF302.125 QLF303.125 QLF304.125 QLF305.125
150 QLF300.150 QLF301.150 QLF302.150 QLF303.150 QLF304.150 QLF305.150
185 QLF300.185 QLF301.185 QLF302.185 QLF303.185 QLF304.185 QLF305.185
240 QLF300.240 QLF301.240 QLF302.240 QLF303.240 QLF304.240 QLF305.240
320 QLF300.320 QLF301.320 QLF305.320
Presentation 100 pcs. / box. - Other formats available under request.
control biogen filter papers & glass fibers FPB004-11
General Filtration
These papers are made of very pure cellulose with a high alpha cellulose content. The average ash content of these filter papers is 0.1% and can be used for ordinary qualitative filtration work. We recommend these filters for the general filtration work and sample preparations in most of the chemical analysis.
Features:
Wet strengthened for higher resistance to longer filtration time. For clarification of liquids. High alpha cellulose content. Low ash content (approx. 0.1%) Available in disc or pleated format for more capacity, surface and filtration speed. Available in three type of paper:
o Smooth surface o Creped surface o Embossed surface
Filters Characteristics:
Grade Surface Filtration
Properties Weight g/m2 Filtration Herzberg s/100ml
Herzberg ml/min
Retention Rate μm
311 creped Very fast 60 40 1500 > 20
312 creped Very fast 70 50 1200 > 15
410 smooth Fast 80 70 850 10 - 13
411 creped Medium to fast 75 120 500 10 - 13
315 smooth Medium to fast 65 140 430 8 - 12
316 embossed Slow to medium 70 150 400 8 - 12
412 smooth Slow to medium 65 330 180 7 -10
Applications:
General filtration work. Clarification of liquids:
o Wine yeast retention. o Wine Sediment removal. o Fruit juice, oil and alcohols. o High sugar concentration solutions (Syrups) o Gelatin and glycerol.
control biogen filter papers & glass fibers FPB004-11
Ordering Information
Grade 311 312 410 411 315 316 412
Ø mm Very fast Fast Medium to
fast Medium Medium
Slow to medium
Slow
55 GP410.055 GP315.055 GP412.055
70 GP311.070 GP410.070 GP315.070 GP316.070 GP412.070
90 GP311.090 GP410.090 GP315.090 GP316.090 GP412.090
110 GP311.110 GP410.110 GP315.110 GP316.110 GP412.110
125 GP311.125 GP312.125 GP410.125 GP411.125 GP315.125 GP316.125 GP412.125
150 GP311.150 GP312.150 GP410.150 GP411.150 GP315.150 GP316.150 GP412.150
185 GP311.185 GP312.185 GP410.185 GP411.185 GP315.185 GP316.185 GP412.185
240 GP311.240 GP312.240 GP410.240 GP411.240 GP315.240 GP316.240 GP412.240
320 GP311.320 GP312.320 GP410.320 GP316.320 GP412.320
480 X 480 4114848
580 x 580 3115858 3125858 4105858 3155858 4125858
Presentation 100 pcs. / box. Other formats available.
Pleated Filters General Papers
Grade 311 312 410 411 315 316 412
Ø mm Very fast Fast Medium to
fast Medium Medium
Slow to medium
Slow
110 GPF311.110 GPF410.110 GPF315.110 GPF316.110 GPF412.110
125 GPF311.125 GPF410.125 GPF315.125 GPF316.125 GPF412.125
150 GPF311.150 GPF410.150 GPF315.150 GPF316.150 GPF412.150
185 GPF311.185 GPF410.185 GPF315.185 GPF316.185 GPF412.185
240 GPF311.240 GPF410.240 GPF315.240 GPF316.240 GPF412.240
320 GPF311.320 GPF410.320 GPF316.320 GPF412.320 Presentation 100 pcs. / box. Other formats available under request.
control biogen filter papers & glass fibers FPB004-11
Glass Microfiber Filters
Our Glass microfiber filters without binders are made of very fine borosilicate fibers that confer to the filters a high efficiency rates even down into the submicronic range. Features:
Combine good permeability and high dirt holding capacity. Non-hygroscopic and biologically inert. Resistant to most solvents and reagents. Heat resistant up to 500 °C. Binder-free filters, especially suitable for water pollution control. High flow velocity and high efficiency for the retention of small and even smallest particles.
Filters Characteristics:
Grade Surface Weight g/m2 Thickness mm Retention rate
µm Pressure Drop1
mbar CBA Smooth 52 0.25 1.6 33 CBB Smooth 143 0.70 1.0 95 CBC Smooth 52 0.26 1.2 54 CBD Smooth 120 0.53 2.7 16 CBF Smooth 75 0.45 0.7 120 CBG Smooth 65 0.28 1.5 30
1 Values based on known particulate size against retention rate average ≥ 95.0%
2 * A = 10 m2, flow velocity 40 cm/sec.
Applications Grade CBA:
Highly efficient for general laboratory filtration. Clarification of buffer and reagent solutions. In compliance with international standards for air
and water pollution monitoring.
Grade CBB:
Filtration of suspended solids in water. Waste water analysis.
Pre-filters for membranes, nucleic acid binding,
radio immune assay.
Large volume filtration.
Grade CBC:
Versatile usage both for drinking and service water filtration.
Universal filter for the determination of suspended solids in water.
Standard filter for the clarification and monitoring of waste water and water.
Scintillation counting on the filter. Cell harvesting. Hydrocarbon analysis as substitute to cellulose
fibers.
Grade CBD:
General use as membrane pre-filter material. Prefiltration in the pharmaceutical, cosmetic and
food industry. Gravimetric testing in the food industry.
Grade CBF:
Higher efficiency in particle retention for smaller particles than other glass fiber grades.
Clarification of protein solutions. Filtration of liquids prior to HPLC.
Grade CBG:
Very similar to Grade CBA but slightly heavier to offer additional resistance to filtration.
Filtration and monitoring of water.
control biogen filter papers & glass fibers FPB004-11
High Temperature Resistant Glass Microfiber
Grade CB-HT is a binder-free glass fiber in compliance with standard methods for determining total suspended solids in water. This filter withstand temperature up to 550ºC
Filters Characteristics:
Grade Weight g/m² Thickness mm Retention Rate
μm DOP Penetration %
0.3 μm Particle Properties
CB-HT 65 0,3 ± 1,5 < 0,02 Binder-free Following ASTM D 2986-95A 0.3 µm (DOP) at 32 L/min/100 cm2 filter media.
Applications:
Cell harvesting. Air pollution control. Liquid scintillation counting. Measurement of engine fuel combustion.
Ordering Information
Grade CBA CBB CBC CBD CBF CBG CB-HT
Ø mm 25 CBA025 CBB025 CBC025 CBD025 CBF025 CBG025 On request
47 CBA047 CBB047 CBC047 CBD047 CBF047 CBG047
50 CBA050 CBC050 CBG050
55 CBA055 CBB055 CBC055 CBD055 CBF055 CBG055
70 CBA070 CBB070 CBC070 CBD070 CBF070 CBG070
90 CBA090 CBB090 CBC090 CBD090 CBF090 CBG090
110 CBA110 CBB110 CBC110 CBD110 CBF110 CBG110
125 CBA125 CBB125 CBC125 CBD125 CBF125 CBG125
150 CBA150 CBB150 CBC150 CBD150 CBF150 CBG150 Presentation 100 pcs. / box. - CBD and CBF : 50 pcs / box Other formats available.
control biogen filter papers & glass fibers FPB004-11
Glass Microfiber Filters with binders
Our glass fiber materials are made of borosilicate glass bounded together by synthetic binders that confer to the filters a high efficiency rates. Recommended for atmospheric and water pollution control.
Features: Combine good permeability and high dirt holding
capacity. Excellent wet strength. Made of 100% borosilicate fibers.
Compatible with a large number of inorganic and organic solution.
Physically and biologically inert. Resist temperatures of about 180°C and up to
250°C.for short exposure.
Filters Characteristics:
Grade Weight g/m2 Pressure Drop Pa (5.3 cm/s)
Efficiency %(0.3 μm)
Properties/Binder Type
CB6 60 260 99,99 (0,12µm) Hydrophobic inorganic
CB7 80 400 99,99 Hydrophobic inorganic
CB8 75 350 99,998 Hydrophobic inorganic
Applications
Grade CB6
Very tight low heavy metal content filter for air pollution control with chemical analysis-
Gravimetric analysis of organic and inorganic compounds in water.
Scintillation measurement control. Biomolecules removal in liquids.
Grade CB7 and CB8
More open filters with excellent retention rate. Suitable for standard air contaminant and dust
measurement.
Ordering Information
227/160 Mg400 Mg227
Ø mm Grade CB6 CB7 CB8
45 CB6047 CB7047 CB8047
47 CB6047 CB7047 CB8047
50 CB6050 CB8050
55 CB6055 CB7055 CB8055
70 CB6070 CB7070 CB8070
90 CB6090 CB7090 CB8090
100 CB6100 CB8100
110 CB6110 CB7110 CB8110
125 CB6125 CB7125 CB8125
150 CB6150 CB7150 CB8150
185 CB6185 CB7185 CB8185
240 CB6240 CB7240 CB8240 Presentation 100 pcs. / box. Other formats available.
control biogen filter papers & glass fibers FPB004-11
Quartz Fiber Filters This filter media is made of pure quartz microfibers without glass fibers and binder. It has been designed for emission control at temperatures of 900 °C. Features:
Made of extremely pure quartz microfibers. Binder-free. Excellent filtration and retention properties of
extremely small particles. Minimal metal contents. Outstanding weight and dimension stability.
Versatile, can be used for the filtration in the analysis of acidic gases (except HF).
Available formats: o circular filters o sheets o reels
Filters Properties:
Grade Weight g/m² Thickness mm Pressure Drop*
mbar DOP Penetration %
0.3 μm Particle Temperature
ºC
QTPH 85 0.45 51,5 < 0,002 900 max. Following ASTM D 2986-95A 0.3 µm (DOP) at 32 L/min/100 cm2 filter media.
Trace Elements Typical values (ppm) for Quartz material
Al Ba Ca Cd Co Cr Cu Fe Mg Mn Na Ni Pb Sr Ti V Zn
300 10 250 0.002 <0.5 2 2 50 25 2 100 2 <1 3 <1 <5 6
Detection limit 0.01 ppm
Applications Grade QTPH
Micro-quartz fiber filter - conditioned (pre-heated) with batch specific certificate of trace elements.
Particularly suitable for pollution control for low amount of particles and aerosols for industrial stacks.
Filtration and analysis of acid and alkaline gases and solvents.
PM10 and PM2.5 particles sampling and analysis.
Handling Care: Glass and Quartz fibers are fragile materials that can be damaged easily: Please handle with care and leave the product in its box until needed.
Ordering Information Quartz fibers
Diameter QTPH Pcs/Box
25 QTPH025 25
47 QTPH047
50 QTPH050
90 QTPH090
100 QTPH103
110 QTPH110
120 QTPH120
142 QTPH142
150 QTPH150
185 QTPH185
257 QTPH257
203x254 QTPH203254
control biogen filter papers & glass fibers FPB004-11
Cellulose thimbles for Soxhlet extraction
Our extraction thimbles are perfect sample reservoirs for Soxhlet extraction in quality control, research and/or analysis. Solvent extraction from solids and semi-solids can be carried out easily and reliably. Features: Specially designed to fit Soxhlet extractors and automatic extractors. Hollow cylinders with round bottom design. Reproducible high quality. Made of selected raw material. Monitored size accuracy. Extraction thimbles tolerances:
Inner diameter (ID) (mm) +0/-3 External length (mm) ± 1 Wall thickness (mm) 1.5 ± 0.5 Ash content (%) <0.1
Applications Determination of fats in food- and feeding stuff Pollutants in environmental and residue analytics Incoming components inspection of natural products from plants in the pharmaceutical industry Polymer determination in polymer industry
Grade ET/400 sizes (inner diam. x ext. length in mm. )
Size Article Size Article Size Article
16 x 100 40016100 26 x 95 4002695 33 x 80²´³ 4003380²´³
19 x 90 4001990 27 x 80 4002780 33 x 90 4003390
20 x 80 4002080 28 x 100 40028100 33 x 94¹ 4003394¹
22 x 60 4002260 28 x 224 40028224 35 x 120 40035120
22 x 80¹ 4002280¹ 28 x 80 4002880 37 x 130 40037130
23 x 100 40023100 30 x 100 40030100 37 x 95 4003795
25 x 100¹ 40025100¹ 30 x 180 40030180 40 x 150 40040150
25 x 55 4002555 30 x 80 4003080 43 x 123¹ 40043123¹
25 x 60 4002560 30 x 95 4003095 43 x 80 4004380
25 x 75 4002575 33 x 100 40033100 48 x 130 40048130
25 x 80 4002580 33 x 118 40033118 48 x 200 40048200
26 x 100 40026100 33 x 130 40033130 48 x 230 40048230
26 x 80 4002680 33 x 205 40033205 26 x 60 ³ 4012660³ 1 fits Buchi B-811 2 fits Gerhardt Soxterm Automatic 3 fits Foss Tecator Soxtec System 4 fits Foss Soxtec 2050 Presentation 25 pcs / box
control biogen filter papers & glass fibers FPB004-11
Glass microfiber thimbles
These high purity micro-glass fiber thimbles can be used in temperatures up to 500°C. They are particularly recommended for aggressive solvents and for analytical registration of environmental pollution.
Features:
No binder – just pure borosilicate fibers Excellent permeability Excellent resistance to high temperature Resistant to aggressive solvents
Thimble Characteristics
Grade Ash content .
% Penetration . % DOP (0,3 µm)
Temperature resistance . ¢ªC
ETH 0.00 < 0,002 500 max.
Ordering Information
Grade ETH Standard sizes (inner diam. x ext. length in mm. )
Size Article Size Article Size Article
10 X 50 ETH1050 23,8 X 68¹ ETH23868 26 X 80 ETH2680
30 X 95 ETH3095 33 X 94 ETH3394 43 X 123 ETH43123
22 X 80 ETH2280 26 X 60 ETH2660 30 X 77 ETH3077
33 X 80 ETH3380 33 X 150 ETH33150 53 X 145¹ ETH 53145¹ 1 fits Gothe Systems - Presentation 25 pcs / box
Quartz microfiber thimbles – Grade ETPH Our line of Micro-Quartz fiber thimbles are specially developed for analysis of air pollution. Made of 100% quartz fiber binder-free material and temperature-resistant up to 900°C.
Thimble characteristics
Grade Ash content .
% Penetration . % DOP (0,3 µm)
Temperature resistance . ¢ªC
ETPH 0.00 < 0,002 900 max.
Ordering Information
Grade ETPH Standard sizes (inner diam. x ext. length in mm. )
Size Article Size Article Size Article
21,5 x 68¹ ETPH215681 30 x 97 ETPH3097 43 x 123 ETPH43123
22 x 62 ETPH2262 34 x 150 ETPH34150 53 x 145¹ ETPH 53145¹
25 x 100 ETPH25100 35 x 150 ETPH35150 Presentation 25 pcs / box
control biogen filter papers & glass fibers FPB004-11
Related Material Microfiltration membranes Filter holders and vacuum manifols Stainless steel & glass funnels Vacuum pumps Perilstatic pumps
Notes