Post on 03-Feb-2022
Architectural & Design Catalog
Welcome To Millwork Concepts
The design of a new home is both an exciting and expensive endeavor. From the architect to the installer,the quality of the service creates the ambience of the home. The catalog within and the attached interactiveCD, provides an easy review and selection of moulding designs compatible with the theme of the house.
Our Architectural & Design Catalog is designed to eliminate the time consuming search for the rightmoulding and provides a wide range of options and suggestions. While we have provided extensive profiles in the catalog and CD, our custom shop and experienced designers can help you create mouldingsof your own choice.
Our 35,000 square feet, state-of-the-art technology facility has the ability to mill complex mouldings andradii and a trained staff with a proven expertise can provide a millwork solution for any custom built residential or commercial project. On-site knife grinding capability, CAD design team and the ability tomill over ten million linear feet per annum, can fulfill your custom moulding needs.
From Red Oak to Teak to Brazilian Cherry, we are equipped to mill all species of woods, no matter thedensity. Our expertise in handling exotic species, including color match, grade selection, precision millingand full service finish solutions, ensures that your need for uncompromised quality is realized.
Whether your design requirements are for a custom radii in MDF or five thousand feet in Brazilian Cherrycrown mouldings, Millwork Concepts is the guaranteed choice for a successful project.
GLOSSARY OF TERMS
Astragal: A moulding with a symmetrical profile used in panels and for horizontal and vertical applications. As in adoor astragal.
Back Band: A moulding applied to the outer edge of a casingto increase its depth to allow combinations of mouldings tonot project beyond its edge. As in wainscot details and baseand base shoe.
Baluster: An upright post to support a hand rail. (Also knownas pickets or spindles)
Balustrade: A series of balusters supporting a rail.
Baseblock: A large block that the casing rests on, it is tallerthan the base and is thicker than the base and base shoe buildup. Baseblock may or may not be profiled.
Baseboard: One or more pieces that are installed at the baseof a wall or cabinet.
Base Cap: A moulding applied to the top of the base foradded detail and height.
Base Shoe: A moulding applied to the bottom of the base foradded detail and at cabinets.
Battens: A flat thin moulding applied vertically over a flat surface.
Bed Moulding: A moulding applied at a right angle to add definition or support to a ledge or overhang.
Brick Mould: An exterior trim around doors. The larger thickness allows all types of siding to be used.
Capital: The head or top part of a column or pilaster. Alsoapplied on the tops of doors and cabinets.
Casing: A moulding or mouldings that encompass a door, window or pass through opening.
Chair Rail: A moulding that is applied horizontally on thewall at any where from 32” to 60” above finished floor.
Cornice: A moulding or combination of mouldings that project between the ceiling and wall. Part of a cornice detail.
Crown: A moulding that is applied at angles from the wall to ceiling, also used in cabinet and pilasters. Part of a cornicedetail.
Coves: Similar to crowns but are more concave and have littleif any detail. Used in many details to enhance depth and support of other materials. See cornice.
Dentil: One of a series of small blocks used to form an ornamental row. Used in cornice details.
Door/Window Cornice Caps: A moulding used in assemblyof the head piece over doors and windows. It is rabbeted to fitover flat stock to give it a crown look.
Flat Stock: Used in conjunction of any moulding assembliesor separate, they vary in width and thickness.
Fluted Casing: Shallow vertical groves in a flat board, in varying widths. Also used in fireplace mantels.
Newel Post: The post at the end or middle of a stair case to support the hand rail.
Panel Caps: Applied in wainscotting details.
Panel Moulds: Moulding applied in paneling detail.
Parting Bead: Used to separate door head pieces from casings. Also used in any other application requiring a separation between mouldings.
Picture Rails: Used on walls to hang pictures.
Pilaster: A flat rectangular column, with capital and base.Used at a cabinet or half column at wall.
Plate Rail: A moulding with top grooved lines to hold decorative plates, pictures or other items.
Rails & Caps: Any hand rail or wallcaps.
Railing Shoe: The bottom area of a rail system that the balusters fits in, may be fitted to the floor or elevated.
Sills: The exterior horizontal piece on a window opening andis sloped for water run off.
Skirtboards: The outer part of a stair system either againstthe wall or on the open side.
Stools: The interior horizontal piece on a window opening, itis supported by an apron and extends slightly into the room.
Thresholds: The horizontal piece at the bottom of an exteriordoor.
Tongue & Groove: A way of joining two pieces of wood together, may have a face pattern to match.
Wainscot: An assembly of mouldings used in any area fromfloor to 30” up to 60” or full height to ceiling.
TABLE OF CONTENTS
Moulding Profile Index Number Page
Casing (MC-1000 to MC-1999) 6-21
Base (MC-2000 to MC-2999) 22-38
Chair Rail (MC-3000 to MC-3499) 39-45
Fluted Casings (MC-3500 to MC-3999) 46-48
Crowns & Coves (MC-4000 to MC-4999) 49-90
Cornice Caps (MC-5000 to MC-5499) 91-100
Panel Caps (MC-5500 to MC-5999) 101-106
Panel Moulds (MC-6000 to MC-6499) 107-111
Picture Rails (MC-6500 to MC-6699) 112
Base Shoe (MC-6700 to MC-6899) 113
Parting Beads (MC-6900 to MC-6999) 114
Base Blocks (MC-7000 to MC-7099) 115-116
Back Bands (MC-7100 to MC-7299) 117
Brick Moulds (MC-7300 to MC-7399) 118
Sills (MC-7400 to MC-7499) 119
Stools (MC-7500 to MC-7549) 120
Thresholds (MC-7549 to MC-7599) 121
Miscellaneous Trims (MC-7600 to MC-7999) 122-125
Rails & Caps (MC-8000 to MC-8199) 126-134
Railing Shoes (MC-8200 to MC-8299) 135
Cabinet Trim (MC-8300 to MC-8499) 136
Tongue & Groove Profiles (MC-8500 to MC-8999) 137-140
CASINGS 800.478.9500
Page 6 All Profiles Available As A CAD File
MC-10049/16” x 1-1/2”
MC-10309/16” x 2-1/4”
MC-10083/4” x 1-1/2”
MC-10359/16” x 2-1/4”
MC-10125/8” x 1-9/16”
MC-10405/8” x 2-1/4”
MC-10169/16” x 1-9/16”
MC-10439/16” x 2-1/4”
MC-10203/4” x 2-3/16”
MC-10459/16” x 2-1/4”
MC-10251/2” x 2-1/4”
MC-10505/8” x 2-1/4”
CASINGS800.478.9500
Page 7All Profiles Available As A CAD File
MC-10555/8” x 2-1/4”
MC-10863/4” x 2-1/4”
MC-10605/8” x 2-1/4”
MC-10903/4” x 2-1/4”
MC-106611/16” x 2-1/4”
MC-10943/4” x 2-1/4”
MC-107111/16” x 2-1/4”
MC-10983/4” x 2-1/4”
MC-107611/16” x 2-1/4”
MC-11023/4” x 2-1/4”
MC-108111/16” x 2-1/4”
MC-11063/4” x 2-1/4”
CASINGS 800.478.9500
Page 8 All Profiles Available As A CAD File
MC-11083/4” x 2-1/4”
MC-11303/4” x 2-5/16”
MC-11103/4” x 2-1/4”
MC-11345/8” x 2-3/8”
MC-11149/16” x 2-5/16”
MC-113811/16” x 2-3/8”
MC-111811/16” x 2-5/16”
MC-11423/4” x 2-3/8”
MC-112211/16” x 2-5/16”
MC-114611/16” x 2-7/16”
MC-11263/4” x 2-9/16”
MC-11519/16” x 2-1/2”
CASINGS800.478.9500
Page 9All Profiles Available As A CAD File
MC-11565/8” x 2-1/2”
MC-118611/16” x 2-1/2”
MC-116111/16” x 2-1/2”
MC-11913/4” x 2-1/2”
MC-116611/16” x 2-1/2”
MC-11963/4” x 2-1/2”
MC-117111/16” x 2-3/4”
MC-12013/4” x 2-1/2”
MC-117611/16” x 2-1/2”
MC-12063/4” x 2-9/16”
MC-118111/16” x 2-1/2”
MC-12113/4” x 2-1/2”
CASINGS 800.478.9500
Page 10 All Profiles Available As A CAD File
MC-12143/4” x 2-1/2”
MC-12363/4” x 2-1/2”
MC-12163/4” x 2-1/2”
MC-12411” x 2-1/2”
MC-12213/4” x 2-1/2”
MC-12461-1/16” x 2-1/2”
MC-12263/4” x 2-1/2”
MC-125111/16” x 2-5/8”
MC-12313/4” x 2-1/2”
MC-12563/4” x 2-5/8”
MC-12343/4” x 2-1/2”
MC-12613/4” x 2-3/4”
CASINGS800.478.9500
Page 11 All Profiles Available As A CAD File
MC-12663/4” x 2-3/4”
MC-12901/2” x 3”
MC-12683/4” x 2-3/4”
MC-12923/4” x 3”
MC-12713/4” x 2-3/4”
MC-12973/4” x 3”
MC-12777/8” x 2-3/4”
MC-13023/4” x 3”
MC-128213/16” x 2-13/16”
MC-13073/4” x 3”
MC-12871” x 2-3/4”
MC-13123/4” x 3”
CASINGS 800.478.9500
Page 12 All Profiles Available As A CAD File
MC-13173/4” x 3”
MC-134813/16” x 3-1/16”
MC-13223/4” x 3”
MC-13505/8” x 3-1/8”
MC-13271” x 3”
MC-13545/8” x 3-1/4”
MC-13321” x 3”
MC-13605/8” x 3-1/4”
MC-13665/8” x 3-1/4”
MC-13383/4” x 3-1/16”
MC-137211/16” x 3-1/4”
MC-13433/4” x 3-1/16”
MC-137811/16” x 3-1/4”
CASINGS800.478.9500
Page 13All Profiles Available As A CAD File
MC-138411/16” x 3-1/4”
MC-14203/4” x 3-1/4”
MC-13903/4” x 3-1/4”
MC-14263/4” x 3-1/4”
MC-13963/4” x 3-1/4”
MC-14323/4” x 3-1/4”
MC-14023/4” x 3-1/4”
MC-14383/4” x 3-1/4”
MC-14083/4” x 3-1/4”
MC-14441-1/16” x 3-1/4”
MC-14143/4” x 3-1/4”
MC-14501-1/16” x 3-1/4”
CASINGS 800.478.9500
Page 14 All Profiles Available As A CAD File
MC-14565/8” x 3-5/16”
MC-15103/4” x 3-3/8”
MC-14623/4” x 3-5/16”
MC-15165/8” x 3-7/16”
MC-14685/8” x 3-3/8”
MC-152211/16” x 3-7/16”
MC-14743/4” x 3-3/8”
MC-15283/4” x 3-7/16”
MC-14803/4” x 3-3/8”
MC-15343/4” x 3-7/16”
MC-14863/4” x 3-3/8”
CASINGS800.478.9500
Page 15All Profiles Available As A CAD File
MC-15403/4” x 3-7/16”
MC-159611/16” x 3-1/2”
MC-15581-3/16” x 3-7/16”
MC-160411/16” x 3-1/2”
MC-15641-1/8” x 3-7/16”
MC-16123/4” x 3-1/2”
MC-15725/8” x 3-1/2”
MC-16203/4” x 3-1/2”
MC-15805/8” x 3-1/2”
MC-16283/4” x 3-1/2”
MC-158811/16” x 3-1/2”
CASINGS 800.478.9500
Page 16 All Profiles Available As A CAD File
MC-16363/4” x 3-1/2”
MC-16683/4” x 3-1/2”
MC-16443/4” x 3-1/2”
MC-16763/4” x 3-1/2”
MC-16483/4” x 3-1/2”
MC-16843/4” x 3-1/2”
MC-16523/4” x 3-1/2”
MC-16923/4” x 3-1/2”
MC-16603/4” x 3-1/2”
MC-17003/4” x 3-1/2”
CASINGS800.478.9500
Page 17All Profiles Available As A CAD File
MC-17083/4” x 3-1/2”
MC-174815/16” x 3-1/2”
MC-17163/4” x 3-1/2”
MC-17561” x 3-1/2”
MC-17243/4” x 3-1/2”
MC-17641-1/16” x 3-1/2”
MC-173213/16” x 3-1/2”
MC-17721-1/16” x 3-1/2”
MC-17407/8” x 3-1/2”
MC-178011/16” x 3-5/8”
CASINGS 800.478.9500
Page 18 All Profiles Available As A CAD File
MC-178811/16” x 3-3/4”
MC-18201” x 4”
MC-179415/16” x 3-3/4”
MC-18281-1/16” x 4”
MC-17963/4” x 3-7/8”
MC-18363/4” x 4-1/16”
MC-18043/4” x 4”
MC-184411/16” x 4-1/4”
MC-18127/8” x 4”
CASINGS800.478.9500
Page 19All Profiles Available As A CAD File
MC-18523/4” x 4-1/4”
MC-189311/16” x 4-1/2”
MC-18601-3/8” x 4-1/4”
MC-18963/4” x 4-1/2”
MC-186811/16” x 4-3/8”
MC-19003/4” x 4-1/2”
MC-18763/4” x 4-3/8”
MC-19081” x 4-1/2”
MC-189211/16” x 4-1/2”
CASINGS 800.478.9500
Page 20 All Profiles Available As A CAD File
MC-19243/4” x 4-9/16”
MC-19323/4” x 4-9/16”
MC-193711/16” x 5-1/4”
MC-19403/4” x 5-1/2”
MC-19483/4” x 5-1/2”
MC-19563/4” x 5-1/2”
MC-19643/4” x 5-1/2”
CASINGS800.478.9500
Page 21All Profiles Available As A CAD File
MC-19723/4” x 5-1/2”
MC-19801-1/2” x 5-1/2”
BASE MOULDINGS 800.478.9500
Page 22 All Profiles Available As A CAD File
MC-20045/8” x 2-1/16”
MC-20121/2” x 2-3/16”
MC-20201/2” x 2-1/4”
MC-20283/4” x 2-1/4”
MC-203615/16” x 2-1/4”
MC-20441/2” x 2-1/2”
MC-20525/8” x 2-1/2”
MC-20603/4” x 2-1/2”
MC-20683/4” x 2-1/2”
MC-21049/16” x 2-13/16”
MC-21305/16” x 3”
MC-21405/8” x 3”
BASE MOULDINGS800.478.9500
Page 23All Profiles Available As A CAD File
MC-21603/4” x 3”
MC-21765/8” x 3-1/16”
MC-21841/2” x 3-1/8”
MC-22009/16” x 3-3/16”
MC-22087/16” x 3-1/4”
MC-22127/16” x 3-1/4”
MC-21925/8” x 3-1/8”
MC-22157/16” x 3-1/4”
MC-22201/2” x 3-1/4”
MC-22241/2” x 3-1/4”
MC-22281/2” x 3-1/4”
BASE MOULDINGS 800.478.9500
Page 24 All Profiles Available As A CAD File
MC-22321/2” x 3-1/4”
MC-22405/8” x 3-1/4”
MC-22445/8” x 3-1/4”
MC-22525/8” x 3-1/4”
MC-22569/16” x 3-5/16”
MC-22645/8” x 3-3/8”
MC-22485/8” x 3-1/4”
MC-22801/2” x 3-7/16”
MC-22841/2” x 3-9/16”
MC-22887/16” x 3-1/2”
MC-22969/16” x 3-1/2”
BASE MOULDINGS800.478.9500
Page 25All Profiles Available As A CAD File
MC-231611/16” x 3-1/2”
MC-23045/8” x 3-1/2”
MC-23323/4” x 3-1/2”
MC-23085/8” x 3-1/2”
MC-23363/4” x 3-1/2”
MC-23125/8” x 3-1/2”
MC-23523/4” x 3-1/2”
MC-23403/4” x 3-1/2”
MC-23583/4” x 3-9/16”
MC-23443/4” x 3-1/2”
MC-236411/16” x 3-9/16”
MC-23483/4” x 3-1/2”
BASE MOULDINGS 800.478.9500
Page 26 All Profiles Available As A CAD File
MC-24009/16” x 3-3/4”
MC-24303/4” x 3-7/8”
MC-24601/2” x 4”
MC-24661/2” x 4”
MC-24719/16” x 4”
MC-24765/8” x 4”
MC-24815/8” x 4”
MC-24853/4” x 4”
MC-24923/4” x 4-1/8”
MC-250411/16” x 4-1/4”
BASE MOULDINGS800.478.9500
Page 27All Profiles Available As A CAD File
MC-25165/8” x 4-3/8”
MC-25243/4” x 4-3/8”
MC-25341/2” x 4-1/2”
MC-25389/16” x 4-1/2”
MC-25449/16” x 4-1/2”
MC-25485/8” x 4-1/2”
BASE MOULDINGS 800.478.9500
Page 28 All Profiles Available As A CAD File
MC-25565/8” x 4-1/2”
MC-256011/16” x 4-1/2”
MC-25683/4” x 4-1/2”
MC-25811-1/16” x 4-1/2”
MC-258911/16” x 4-5/8”
MC-259311/16” x 4-5/8”
BASE MOULDINGS800.478.9500
Page 29All Profiles Available As A CAD File
MC-26055/8” x 4-3/4”
MC-26401/2” x 4-13/16”
MC-26523/4” x 4-13/16”
MC-26829/16” x 5”
MC-26885/8” x 5”
MC-26925/8” x 5”
BASE MOULDINGS 800.478.9500
Page 30 All Profiles Available As A CAD File
MC-26975/8” x 5”
MC-27143/4” x 5”
MC-27221” x 5”
MC-27283/4” x 5-1/8”
MC-27323/4” x 5-1/8”
MC-273611/16” x 5-3/16”
BASE MOULDINGS800.478.9500
Page 31All Profiles Available As A CAD File
MC-27429/16” x 5-1/4”
MC-27475/8” x 5-1/4”
MC-27535/8” x 5-1/4”
MC-275911/16” x 5-1/4”
MC-27643/4” x 5-1/4”
MC-27693/4” x 5-1/4”
BASE MOULDINGS 800.478.9500
Page 32 All Profiles Available As A CAD File
MC-27735/8” x 5-3/8”
MC-27775/8” x 5-3/8”
MC-27813/4” x 5-3/8”
MC-27853/4” x 5-3/8”
MC-27897/8” x 5-3/8”
MC-27941/2” x 5-1/2”
BASE MOULDINGS800.478.9500
Page 33All Profiles Available As A CAD File
MC-28005/8” x 5-1/2”
MC-28065/8” x 5-1/2”
MC-28105/8” x 5-1/2”
MC-28145/8” x 5-1/2”
MC-28185/8” x 5-1/2”
MC-282211/16” x 5-1/2”
BASE MOULDINGS 800.478.9500
Page 34 All Profiles Available As A CAD File
MC-282611/16” x 5-1/2”
MC-28303/4” x 5-1/2”
MC-28343/4” x 5-1/2”
MC-28383/4” x 5-1/2”
MC-28423/4” x 5-1/2”
MC-28463/4” x 5-1/2”
BASE MOULDINGS800.478.9500
Page 35All Profiles Available As A CAD File
MC-28503/4” x 5-1/2”
MC-285413/16” x 5-1/2”
MC-28663/4” x 5-3/4”
MC-28805/8” x 6”
MC-28863/4” x 6”
MC-28945/8” x 6-1/4”
BASE MOULDINGS 800.478.9500
Page 36 All Profiles Available As A CAD File
MC-289811/16” x 6-1/4”
MC-29101-1/16” x 6-1/2”
MC-29245/16” x 7”
MC-29275/8” x 7”
MC-29303/4” x 7”
MC-293311/16” x 7-1/16”
BASE MOULDINGS800.478.9500
Page 37All Profiles Available As A CAD File
MC-29395/8” x 7-1/4”
MC-29423/4” x 7-1/4”
MC-29493/4” x 7-5/16”
MC-29523/4” x 7-5/16”
MC-29553/4” x 7-1/2”
BASE MOULDINGS 800.478.9500
Page 38 All Profiles Available As A CAD File
MC-29843/4” x 8-3/4”
MC-29903/4” x 9”
CHAIR RAIL800.478.9500
Page 39All Profiles Available As A CAD File
MC-30043/4” x 1-9/16”
MC-30101/2” x 1-5/8”
MC-30169/16” x 1-5/8”
MC-30223/8” x 1-3/4”
MC-302611/16” x 1-7/8”
MC-30303/4” x 2”
MC-30343/4” x 2”
MC-30383/4” x 2”
MC-30481-1/16” x 2”
MC-30541-1/4” x 2-1/4”
MC-30641/2” x 2-1/4”
MC-307011/16” x 2-1/4”
MC-308211/16” x 2-7/16”
MC-30881-1/16” x 2-7/16”
MC-30987/16” x 2-1/2”
MC-31041/2” x 2-1/2”
CHAIR RAIL 800.478.9500
Page 40 All Profiles Available As A CAD File
MC-31109/16” x 2-1/2”
MC-31165/8” x 2-1/2”
MC-312211/16” x 2-1/2”
MC-312611/16” x 2-1/2”
MC-313011/16” x 2-1/2”
MC-31343/4” x 2-1/2”
MC-31383/4” x 2-1/2”
MC-31423/4” x 2-1/2”
MC-314613/16” x 2-1/2”
MC-31501-1/4” x 2-1/2”
MC-31545/8” x 2-9/16”
MC-315811/16” x 2-9/16”
MC-31641-1/2” x 2-9/16”
MC-31675/8” x 2-5/8”
MC-317011/16” x 2-1/4”
CHAIR RAIL800.478.9500
Page 41All Profiles Available As A CAD File
MC-31767/8” x 2-11/16”
MC-318211/16” x 2-7/8”
MC-31863/4” x 2-13/16”
MC-31885/8” x 3”
MC-319411/16” x 3”
MC-32003/4” x 3”
MC-32043/4” x 3”
MC-32083/4” x 3”
MC-321213/16” x 3”
MC-322011/16” x 3-1/16”
MC-322411/16” x 3-1/16”
MC-322811/16” x 3-1/16”
MC-32343/4” x 3-1/16”
CHAIR RAIL 800.478.9500
Page 42 All Profiles Available As A CAD File
MC-32361-1/4” x 3-1/4”
MC-32523/4” x 3-3/8”
MC-325811/16” x 3-7/16”
MC-32763/4” x 3-1/2”
MC-32803/4” x 3-1/2”
MC-32843/4” x 3-1/2”
MC-327011/16” x 3-1/2”
CHAIR RAIL800.478.9500
Page 43All Profiles Available As A CAD File
MC-33081-1/16” x 3-13/16”
MC-33143/4” x 3-7/8”
MC-332415/16” x 4”
MC-33461-1/4” x 4-9/16”
MC-33601-1/2” x 4-5/8”
CHAIR RAIL 800.478.9500
Page 44 All Profiles Available As A CAD File
MC-33703/4” x 4-11/16”
MC-33843/4” x 5”
MC-33901-7/16” x 5”
MC-34203/4” x 5-5/8”
MC-34601-3/4” x 5-13/16”
CHAIR RAIL800.478.9500
Page 45All Profiles Available As A CAD File
MC-34761-3/4” x 6-1/8”
FLUTED CASING 800.478.9500
Page 46 All Profiles Available As A CAD File
MC-35041/2” x 1-1/2”
MC-35123/4” x 2”
MC-35203/4” x 2-1/4”
MC-35283/4” x 3”
MC-35363/4” x 3-1/4”
MC-35443/4” x 3-1/4”
MC-35523/4” x 3-1/2”
MC-35603/4” x 3-1/2”
MC-35683/4” x 3-9/16”
FLUTED CASING800.478.9500
Page 47All Profiles Available As A CAD File
MC-35923/4” x 3-3/4”
MC-36003/4” x 3-3/4”
MC-35769/16” x 3-9/16”
MC-35843/4” x 3-3/4”
MC-36083/4” x 4”
MC-36163/4” x 4-1/2”
FLUTED CASING 800.478.9500
Page 48 All Profiles Available As A CAD File
MC-36403/4” x 5-1/2”
MC-36483/4” x 6-5/8”
MC-36243/4” x 4-15/16”
MC-36323/4” x 5-7/16”
MC-36563/4” x 7-1/8”
CROWNS & COVES800.478.9500
Page 49All Profiles Available As A CAD File
MC-40081/2” x 1/2”
MC-40165/8” x 5/8”
MC-40245/8” x 3/4”
MC-40323/4” x 3/4”
MC-40403/4” x 7/8”
MC-40461” x 1”
MC-40521” x 1”
MC-405313/16” x 7/8”
MC-40601-1/8” x 1-1/8”
MC-40663/4” x 1-9/16”
MC-40741-1/4” x 1-1/4”
MC-40821-1/8” x 1-7/16”
MC-40923/4” x 1-1/2”
MC-41007/8” x 1-1/2”
MC-41121-1/2” x 1-1/2”
MC-41223/4” x 1-9/16”
MC-41301/2” x 1-3/8”
MC-41351/2” x 1-5/8”
MC-41409/16” x 1-5/8”
MC-41375/8” x 1-5/8”
MC-414511/16” x 1-5/8”
CROWNS &COVES 800.478.9500
Page 50 All Profiles Available As A CAD File
MC-41515/8” x 1-5/8”
MC-41529/16” x 1-5/8”
MC-41535/8” x 1-5/8”
MC-41611-1/4” x 1-5/8”
MC-41695/8” x 1-3/4”
MC-41793/4” x 1-11/16”
MC-418811/16” x 1-13/16”
MC-41903/4” x 1-3/4”
MC-41943/4” x 1-3/4”
MC-41993/4” x 1-13/16”
MC-42091-3/4” x 1-3/4”
MC-421011/16” x 1-7/8”
CROWNS &COVES800.478.9500
Page 51All Profiles Available As A CAD File
MC-42121-3/4” x 1-3/4”
MC-42135/8” x 1-3/4”
MC-42203/4” x 2”
MC-42219/16” x 2”
MC-422311/16” x 1-7/8”
MC-42301/2” x 2-1/4”
MC-42265/8” x 2-3/16”
MC-42295/8” x 2-1/4”
MC-42319/16” x 2-1/4”
MC-423211/16” x 2-1/8”
MC-423311/16” x 2-1/8”
CROWNS & COVES 800.478.9500
Page 52 All Profiles Available As A CAD File
MC-42353/4” x 2-1/4”
MC-42403/4” x 2-1/4”
MC-42451” x 2-1/4”
MC-42501-3/8” x 2-1/4”
MC-425611/16” x 2-7/16”
MC-42573/4” x 2-3/8”
MC-426111/16” x 2-1/2”
MC-426711/16” x 2-7/16”
MC-42705/8” x 2-7/16”
MC-42733/4” x 2-5/8”
MC-42825/8” x 2-1/2”
CROWNS & COVES800.478.9500
Page 53All Profiles Available As A CAD File
MC-429211/16” x 2-1/2”
MC-429511/16” x 2-1/2”
MC-42935/8” x 2-1/2”
MC-42941” x 2-1/2”
MC-42983/4” x 2-1/2”
MC-43023/4” x 2”
MC-43063/4” x 2-5/8”
MC-43103/4” x 2-1/2”
MC-43143/4” x 2-1/2”
CROWNS & COVES 800.478.9500
Page 54 All Profiles Available As A CAD File
MC-43183/4” x 2-9/16”
MC-432611/16” x 2-3/8”
MC-43343/4” x 2-5/8”
MC-43383/4” x 2-11/16”
MC-43433/4” x 2-5/8”
MC-434111/16” x 2-5/8”
MC-43421-3/8” x 2-5/8”
MC-43443/4” x 2-3/4”
MC-43529/16” x 2-3/4”
CROWNS & COVES800.478.9500
Page 55All Profiles Available As A CAD File
MC-43569/16” x 2-3/4”
MC-43573/4” x 2-3/4”
MC-43539/16” x 2-3/4”
MC-435411/16” x 2-3/4”
MC-435513/16” x 2-3/4”
MC-43605/8” x 2-3/4”
MC-43615/8” x 2-3/4”
MC-436411/16” x 2-3/4”
MC-43683/4” x 2-3/4”
CROWNS & COVES 800.478.9500
Page 56 All Profiles Available As A CAD File
MC-43763/4” x 2-3/4”
MC-43803/4” x 2-3/4”
MC-43841/2” x 2-7/8”
MC-43867/8” x 2-7/8”
MC-43875/8” x 3”
MC-43887/8” x 3”
MC-43723/4” x 2-13/16”
MC-437313/16” x 3”
MC-43741” x 2-15/16”
CROWNS & COVES800.478.9500
Page 57All Profiles Available As A CAD File
MC-439011/16” x 2-7/8”
MC-439211/16” x 3”
MC-43943/4” x 3”
MC-43983/4” x 2-15/16”
MC-440011/16” x 3-1/8”
MC-440211/16” x 3-1/8”
MC-440511/16” x 3-3/16”
MC-440311/16” x 3-1/8”
MC-440413/16” x 3-1/8”
CROWNS & COVES 800.478.9500
Page 58 All Profiles Available As A CAD File
MC-44093/4” x 3-1/8”
MC-44137/8” x 3-3/16”
MC-44173/4” x 3-1/4”
MC-44213/4” x 3-1/4”
MC-442211/16” x 3-1/4”
MC-442611/16” x 3-3/8”
MC-443011/16” x 3-3/8”
MC-443411/16” x 3-5/16”
MC-44353/4” x 3-3/8”
CROWNS & COVES800.478.9500
Page 59All Profiles Available As A CAD File
MC-445111/16” x 3-3/8”
MC-44553/4” x 3-3/8”
MC-44597/8” x 3-7/16”
MC-44473/4” x 3-1/2”
MC-44441-5/8” x 3-3/8”
MC-444313/16” x 3-7/16”
MC-44411-1/4” x 3-3/8”
MC-44397/8” x 3-5/16”
MC-44671-1/4” x 3-1/2”
CROWNS & COVES 800.478.9500
Page 60 All Profiles Available As A CAD File
MC-44761” x 3-7/16”
MC-44753/4” x 3-1/2”
MC-44735/8” x 3-1/2”
MC-44863/4” x 3-1/2”
MC-44853/4” x 3-1/2”
MC-447911/16” x 3-1/2”
MC-448713/16” x 3-1/2”
MC-44933/4” x 3-9/16”
MC-449711/16” x 3-9/16”
CROWNS & COVES800.478.9500
Page 61All Profiles Available As A CAD File
MC-45013/4” x 3-9/16”
MC-450713/16” x 3-9/16”
MC-45121” x 3-9/16”
MC-451811/16” x 3-5/8”
MC-46163/4” x 3-7/16”
MC-46181-1/8” x 3-5/8”
MC-461711/16” x 3-5/8”
MC-462413/16” x 3-5/8”
MC-46323/4” x 3-3/4”
CROWNS & COVES 800.478.9500
Page 62 All Profiles Available As A CAD File
MC-464611/16” x 4”
MC-46481” x 3-7/8”
MC-46543/4” x 4”
MC-46563/4” x 4”
MC-46331-1/8” x 3-7/8”
MC-46361” x 3-7/8”
MC-46341” x 3-3/4”
MC-46353/4” x 3-7/8”
CROWNS & COVES800.478.9500
Page 63All Profiles Available As A CAD File
MC-46573/4” x 4”
MC-46681” x 4-1/8”
MC-466415/16” x 4-1/8”
MC-46661” x 4”
MC-46673/4” x 4-1/8”
MC-46587/8” x 4”
MC-467411/16” x 4-1/2”
CROWNS & COVES 800.478.9500
Page 64 All Profiles Available As A CAD File
MC-467611/16” x 4-1/4”
MC-46781-5/8” x 4-1/4”
MC-46793/4” x 4-1/4”
MC-467711/16” x 4-1/4”
CROWNS & COVES800.478.9500
Page 65All Profiles Available As A CAD File
MC-46811” x 4-1/4”
MC-46921-1/16” x 4-3/8”
MC-468413/16” x 4-1/4”
MC-468813/16” x 4-1/4”
MC-46821-1/2” x 4-1/4”
MC-46803/4” x 4-1/4”
CROWNS & COVES 800.478.9500
Page 66 All Profiles Available As A CAD File
MC-47001-1/8” x 4-3/8”
MC-47153/4” x 4-3/16”
MC-46961-1/16” x 4-1/4”
MC-47067/8” x 4-3/8”
MC-47083/4” x 4-3/8”
MC-47113/4” x 4-3/8”
CROWNS & COVES800.478.9500
Page 67All Profiles Available As A CAD File
MC-472111/16” x 4-9/16”
MC-47373/4” x 4-11/16”
MC-47221” x 4-1/2”
MC-47293/4” x 4-7/16”
MC-47333/4” x 4-3/8”
MC-47437/8” x 4-3/4”
CROWNS & COVES 800.478.9500
Page 68 All Profiles Available As A CAD File
MC-475111/16” x 4-3/4”
MC-47537/8” x 4-7/8”
MC-474411/16” x 4-5/8”
MC-474513/16” x 4-5/8”
CROWNS & COVES800.478.9500
Page 69All Profiles Available As A CAD File
MC-47611-7/16” x 4-15/16”
MC-47671” x 5”
MC-47663/4” x 5”
MC-47723/4” x 5-1/16”
CROWNS & COVES 800.478.9500
Page 70 All Profiles Available As A CAD File
MC-47781-5/16” x 5-1/16”
MC-478511/16” x 5-3/16”
MC-47841-1/16” x 5-3/16”
MC-47911-7/16” x 5-1/4”
CROWNS & COVES800.478.9500
Page 71All Profiles Available As A CAD File
MC-47993/4” x 5-5/8”
MC-48073/4” x 5-1/4”
MC-48111” x 5-1/4”
MC-47953/4” x 5-3/4”
CROWNS &COVES 800.478.9500
Page 72 All Profiles Available As A CAD File
MC-48161-1/2” x 5-5/8”
MC-48251-1/16” x 5-1/4”
MC-48293/4” x 5-3/8”
MC-48201-1/16” x 5-1/4”
CROWNS &COVES800.478.9500
Page 73All Profiles Available As A CAD File
MC-48301-7/16” x 5-3/8”
MC-48311-3/8” x 5-3/8”
MC-48331-1/16” x 5-3/8”
MC-48341-1/4” x 5-1/2”
CROWNS & COVES 800.478.9500
Page 74 All Profiles Available As A CAD File
MC-48601-1/4” x 5-1/2”
MC-48431-1/4” x 5-3/8”
MC-48663/4” x 5-9/16”
MC-48471-3/8” x 5-3/8”
CROWNS & COVES800.478.9500
Page 75All Profiles Available As A CAD File
MC-487613/16” x 5-5/8”
MC-48811-5/8” x 5-5/8”
MC-48801-1/4” x 5-9/16”
MC-48851-1/2” x 5-5/8”
CROWNS & COVES 800.478.9500
Page 76 All Profiles Available As A CAD File
MC-48951-5/16” x 5-11/16”
MC-48961-3/4” x 5-3/4”
MC-488613/16” x 5-11/16”
MC-489015/16” x 5-13/16”
CROWNS & COVES800.478.9500
Page 77All Profiles Available As A CAD File
MC-48991-3/8” x 5-15/16”
MC-48971” x 5-3/16”
MC-48983/4” x 5-3/4”
MC-49001-3/8” x 6”
CROWNS & COVES 800.478.9500
Page 78 All Profiles Available As A CAD File
MC-49041-1/2” x 6-3/16”
MC-49061” x 6-1/4”
MC-49077/8” x 6-1/4”
MC-49051” x 6-1/4”
Optional Dentil
CROWNS & COVES800.478.9500
Page 79All Profiles Available As A CAD File
MC-49081-1/16” x 6-1/4”
MC-49101-5/8” x 6-5/8”
MC-49091-1/4” x 6-1/4”
CROWNS & COVES 800.478.9500
Page 80 All Profiles Available As A CAD File
MC-49171-1/4” x 6-13/16”
MC-49161-1/16” x 6-7/8”
MC-49191” x 7-1/16”
CROWNS & COVES800.478.9500
Page 81All Profiles Available As A CAD File
MC-49221-1/4” x 6-7/8”
MC-49241-3/8” x 7”
MC-49281-3/4” x 6-1/2”
CROWNS & COVES 800.478.9500
Page 82 All Profiles Available As A CAD File
MC-49291-7/16” x 6-13/16”
MC-49313/4” x 7”
MC-49321” x 7”
CROWNS & COVES800.478.9500
Page 83All Profiles Available As A CAD File
MC-49401-5/8” x 7”
MC-49461-11/16” x 7”
MC-49341-3/8” x 7-1/8”
CROWNS & COVES 800.478.9500
Page 84 All Profiles Available As A CAD File
MC-49623/4” x 7-1/4”
MC-49567/8” x 7-3/16”
MC-49471-1/2” x 7-1/8”
CROWNS & COVES800.478.9500
Page 85All Profiles Available As A CAD File
MC-49631-3/8” x 7-1/2”
MC-49641-3/4” x 7-1/4”
CROWNS & COVES 800.478.9500
Page 86 All Profiles Available As A CAD File
MC-49651” x 7-1/2”
MC-49671-5/8” x 7-5/8”
CROWNS & COVES800.478.9500
Page 87All Profiles Available As A CAD File
MC-49721-5/8” x 8”
MC-49711-3/4” x 7-13/16”
CROWNS & COVES 800.478.9500
Page 88 All Profiles Available As A CAD File
MC-49732-1/4” x 7-13/16”
MC-49771” x 8-1/8”
CROWNS & COVES800.478.9500
Page 89All Profiles Available As A CAD File
MC-49781-3/8” x 9”
MC-49791-3/4” x 8-5/8”
CROWNS & COVES 800.478.9500
Page 90 All Profiles Available As A CAD File
MC-49811-5/8” x 8-1/2”
MC-49801-5/8” x 8-3/4”
CORNICE CAPS800.478.9500
Page 91All Profiles Available As A CAD File
MC-50051-1/16” x 1-1/16”
MC-50091-1/8” x 1”
MC-501413/16” x 1-3/8”
MC-50191” x 1-1/2”
MC-50241-5/16” x 1-1/2”
MC-50291-1/2” x 1-1/2”
MC-50347/8” x 1-3/4”
MC-50391-1/16” x 1-3/4”
MC-50441-1/4” x 1-3/4”
MC-50491-3/8” x 1-3/4”
MC-50541-3/4” x 1-13/16”
MC-50591-5/8” x 1-13/16”
MC-50641-3/4” x 1-13/16”
CORNICE CAPS 800.478.9500
Page 92 All Profiles Available As A CAD File
MC-50741-13/16” x 1-7/8”
MC-50791” x 2”
MC-50841-3/16” x 2”
MC-50901-3/16” x 2”
MC-51201-1/2” x 2”
MC-51261-1/2” x 2”
MC-50961-1/4” x 2”
MC-51021-1/4” x 2”
MC-51081-1/4” x 2”
MC-51141-5/16” x 2”
MC-50693/4” x 1-7/8”
CORNICE CAPS800.478.9500
Page 93All Profiles Available As A CAD File
MC-51381-1/2” x 2-3/16”
MC-51431” x 2-1/4”
MC-51481-3/16” x 2-1/4”
MC-51761” x 2-3/8”
MC-51821-1/16” x 2-3/8”
MC-51531-1/4” x 2-1/4”
MC-51581-3/8” x 2-1/4”
MC-51651-3/4” x 2-1/4”
MC-51702” x 2-1/4”
MC-51321-1/8” x 2-1/8”
CORNICE CAPS 800.478.9500
Page 94 All Profiles Available As A CAD File
MC-51881-9/16” x 2-3/8”
MC-52021-3/8” x 2-7/16”
MC-51951-1/4” x 2-7/16”
MC-52092” x 2-7/16”
MC-52371-3/8” x 2-1/2”
MC-52401-3/8” x 2-1/2”
MC-52162-1/8” x 2-7/16”
MC-52301-1/8” x 2-1/2”
MC-52233/4” x 2-1/2”
CORNICE CAPS800.478.9500
Page 95All Profiles Available As A CAD File
MC-52441-7/16” x 2-1/2”
MC-52581-3/8” x 2-1/4”
MC-52721-3/8” x 2-3/4”
MC-52821-1/2” x 2-3/4”
MC-52511-1/2” x 2-9/16”
MC-52651-3/8” x 2-11/16”
MC-52771-7/16” x 2-3/4”
MC-52871-7/8” x 2-3/4”
CORNICE CAPS 800.478.9500
Page 96 All Profiles Available As A CAD File
MC-52941-3/4” x 3”
MC-53011-11/16” x 3-3/16”
MC-53082-1/4” x 3-1/4”
MC-53222-9/16” x 3-7/16”
MC-53151” x 3-3/8”
MC-53293/4” x 3-1/2”
CORNICE CAPS800.478.9500
Page 97All Profiles Available As A CAD File
MC-53361” x 3-1/2”
MC-53401” x 3-1/2”
MC-53441” x 3-1/2”
MC-53511-3/8” x 3-1/2”
MC-53581-1/2” x 3-1/2”
MC-53651-5/8” x 3-1/2”
CORNICE CAPS 800.478.9500
Page 98 All Profiles Available As A CAD File
MC-53732-1/8” x 3-1/2”
MC-53803/4” x 3-9/16”
MC-53901-5/16” x 3-9/16”
MC-54003/4” x 4”
MC-54071-1/2” x 4-1/16”
MC-54171-5/8” x 4-3/16”
CORNICE CAPS800.478.9500
Page 99All Profiles Available As A CAD File
MC-54561” x 4-1/2”
MC-54251-3/4” x 4-1/4”
MC-54684” x 5-1/4”
CORNICE CAPS 800.478.9500
Page 100 All Profiles Available As A CAD File
MC-54801-3/4” x 6”
MC-54882-3/4” x 6-1/2”
2 Piece
PANEL CAPS800.478.9500
Page 101All Profiles Available As A CAD File
MC-55043/4” x 7/8”
MC-55099/16” x 1”
MC-55143/4” x 1”
MC-55193/4” x 1”
MC-55243/4” x 1”
MC-55293/4” x 1”
MC-553415/16” x 1”
MC-554215/16” x 1”
MC-55473/4” x 1-1/16”
MC-55587/8” x 1-1/16”
MC-55627/8” x 1-1/16”
MC-556715/16” x 1-1/16”
MC-55745/8” x 1-1/8”
MC-55785/8” x 1-1/8”
MC-56881-3/16” x 1-5/16”
MC-56937/8” x 1-5/16”
MC-57043/4” x 1-3/8”
MC-56991-1/8” x 1-5/16”
MC-570913/16” x 1-3/8”
MC-55847/8” x 1-1/8”
MC-56781” x 1-1/8”
MC-56843/4” x 1-1/4”
MC-555313/16” x 1-1/16”
PANEL CAPS 800.478.9500
Page 102 All Profiles Available As A CAD File
MC-57131-3/16” x 1-3/8”
MC-57171” x 1-3/8”
MC-57221-1/4” x 1-3/8”
MC-572613/16” x 1-7/16”
MC-57307/8” x 1-7/16”
MC-57341-1/16” x 1-7/16”
MC-57383/8” x 1-1/2”
MC-57427/8” x 1-1/2”
MC-57471-1/4” x 1-1/2”
MC-57661” x 1-5/8”
MC-57821-1/16” x 1-3/4”
MC-57861-1/2” x 1-3/4”
MC-577211/16” x 1-3/4”
MC-577611/16” x 1-3/4”
MC-57511-3/16” x 1-9/16”
MC-57565/8” x 1-5/8”
MC-57623/4” x 1-11/16”
PANEL CAPS800.478.9500
Page 103All Profiles Available As A CAD File
MC-57901-1/8” x 1-13/16”
MC-57987/8” x 1-7/8”
MC-57941-13/16” x 1-13/16”
MC-58241-1/8” x 2”
MC-58301-3/8” x 2”
MC-58361-5/8” x 2”
MC-58021” x 1-7/8”
MC-580811/16” x 2”
MC-58041-1/16” x 1-15/16”
MC-581111/16” x 2”
MC-58201” x 2”
MC-58141-1/16” x 1-3/4”
PANEL CAPS 800.478.9500
Page 104 All Profiles Available As A CAD File
MC-58423/4” x 2-1/16”
MC-58521” x 2-1/8”
MC-58481-1/4” x 2-1/16”
MC-585613/16” x 2-3/16”
MC-58693/4” x 2-1/4”
MC-58783/4” x 2-3/8”
MC-58813/4” x 2-3/8”
MC-586211/16” x 2-1/4”
MC-58753/4” x 2-1/4”
MC-58891-11/16” x 2-5/16”
MC-58723/4” x 2-1/4”
MC-58663/4” x 2-1/4”
MC-585815/16” x 2-1/4”
PANEL CAPS800.478.9500
Page 105All Profiles Available As A CAD File
MC-58971-1/4” x 2-7/16”
MC-591111/16” x 2-1/2”
MC-59163/4” x 2-5/8”
MC-59221-1/8” x 2-1/2”
MC-59251-1/8” x 2-1/2”
MC-59291-1/8” x 2-1/2”
MC-59353/4” x 2-9/16”
MC-594215/16” x 2-9/16”
MC-595011/16” x 2-7/8”
MC-590711/16” x 2-1/2”
MC-590411/16” x 2-1/2”
PANEL CAPS 800.478.9500
Page 106 All Profiles Available As A CAD File
MC-595411/16” x 2-7/8”
MC-59621-3/8” x 3”
MC-59721-1/16” x 3-1/2”
MC-59801-7/16” x 3-1/2”
PANEL MOULDS800.478.9500
Page 107All Profiles Available As A CAD File
MC-60041/4” x 3/8”
MC-60081/4” x 1/2”
MC-60123/8” x 1/2”
MC-60141/2” x 1/2”
MC-60161/4” x 9/16”
MC-60181/2” x 1/2”
MC-60247/16” x 9/16”
MC-60267/16” x 5/8”
MC-60283/8” x 5/8”
MC-60307/16” x 5/8”
MC-60325/8” x 5/8”
MC-60343/8” x 3/4”
MC-60367/16” x 3/4”
MC-60403/8” x 3/4”
MC-60423/8” x 3/4”
MC-60443/8” x 3/4”
MC-60481/2” x 3/4”
MC-60521/2” x 3/4”
MC-60561/2” x 3/4”
MC-60581/2” x 3/4”
MC-60601/2” x 3/4”
MC-60629/16” x 3/4”
MC-60689/16” x 3/4”
MC-60705/8” x 3/4”
MC-60725/8” x 3/4”
MC-60765/8” x 3/4”
MC-60805/8” x 3/4”
MC-60885/8” x 3/4”
MC-60925/8” x 3/4”
MC-60963/4” x 3/4”
MC-61003/4” x 3/4”
MC-61083/4” x 3/4”
MC-61121/2” x 7/8”
MC-61143/8” x 7/8”
MC-61165/8” x 7/8”
MC-61205/8” x 7/8”
MC-61245/8” x 7/8”
MC-61267/8” x 7/8”
MC-61289/16” x 15/16”
MC-61301/2” x 1”
MC-61323/8” x 1”
MC-61349/16” x 1”
MC-61101/2” x 7/8”
MC-60845/8” x 3/4”
PANEL MOULDS 800.478.9500
Page 108 All Profiles Available As A CAD File
MC-61369/16” x 1”
MC-61403/8” x 1”
MC-61421/2” x 1”
MC-61441/2” x 1”
MC-61889/16” x 1-1/8”
MC-61925/8” x 1-1/8”
MC-61965/8” x 1-1/8”
MC-62005/8” x 1-1/8”
MC-62043/4” x 1-1/8”
MC-620813/16” x 1-1/8”
MC-62123/4” x 1-3/16”
MC-62169/16” x 1-1/4”
MC-62203/8” x 1-1/4”
MC-62241/2” x 1-1/4”
MC-62285/8” x 1-1/4”
MC-62325/8” x 1-1/4”
MC-61481/2” x 1”
MC-61525/8” x 1”
MC-615611/16” x 1”
MC-61609/16” x 1-1/16”
MC-61641” x 1-1/16”
MC-61683/4” x 1-1/16”
MC-61721/2” x 1-1/16”
MC-61769/16” x 15/16”
MC-61809/16” x 1-1/8”
MC-61841/2” x 1-1/8”
PANEL MOULDS800.478.9500
Page 109All Profiles Available As A CAD File
MC-623411/16” x 1-1/4”
MC-62363/4” x 1-1/4”
MC-62403/4” x 1-1/4”
MC-62429/16” x 1-5/16”
MC-62443/4” x 1-5/16”
MC-624811/16” x 1-5/16”
MC-62527/8” x 1-5/16”
MC-62567/8” x 15/16”
MC-62605/8” x 1-3/8”
MC-62643/4” x 1-3/8”
MC-626813/16” x 1-3/8”
MC-62703/4” x 1-7/16”
MC-62725/8” x 1-7/16”
MC-62767/16” x 1-7/16”
MC-628011/16” x 1-7/16”
MC-62843/8” x 1-7/16”
MC-63003/4” x 1-1/2”
MC-63041-3/16” x 1-1/2”
MC-63081-3/8” x 1-9/16”
MC-62965/8” x 1-1/2”
MC-62921/2” x 1-1/2”
MC-62881/2” x 1-1/2”
PANEL MOULDS 800.478.9500
Page 110 All Profiles Available As A CAD File
MC-63205/8” x 1-9/16”
MC-631613/16” x 1-9/16”
MC-63123/4” x 1-9/16”
MC-63329/16” x 1-3/4”
MC-63283/4” x 1-5/8”
MC-63225/8” x 1-5/8”
MC-63401-1/16” x 1-3/4”
MC-633611/16” x 1-3/4”
MC-63343/4” x 1-3/4”
MC-635211/16” x 1-7/8”
MC-63481-3/16” x 1-3/4”
MC-63563/4” x 1-7/8”
MC-63441-1/4” x 1-3/4”
MC-635411/16” x 1-7/8”
MC-636011/16” x 2”
MC-63643/4” x 2”
PANEL MOULDS800.478.9500
Page 111All Profiles Available As A CAD File
MC-63761-1/8” x 2”
MC-63841-1/2” x 2”
MC-64067/8” x 2-1/4”
MC-64121-1/8” x 2-3/8”
MC-64003/4” x 2-3/16”
MC-638811/16” x 2-1/8”
MC-63723/4” x 2”
MC-63683/4” x 2”
PICTURE RAIL 800.478.9500
Page 112 All Profiles Available As A CAD File
MC-65063/4” x 1-3/4”
MC-65123/4” x 1-3/4”
MC-65183/4” x 1-3/4”
MC-65243/4” x 1-3/4”
MC-65303/4” x 1-3/4”
MC-65367/8” x 1-3/4”
MC-654211/16” x 2”
MC-654911/16” x 2-1/8”
MC-655511/16” x 2-1/8”
MC-65613/4” x 2-1/4”
MC-656711/16” x 2-3/16”
MC-657111/16” x 2-3/16”
MC-65793/4” x 2-9/16”
MC-65853/4” x 2-5/8”
BASE SHOE800.478.9500
Page 113All Profiles Available As A CAD File
MC-67947/16” x 1-1/2”
MC-68083/8” x 1-3/4”
MC-68181/2” x 2”
MC-68407/16” x 2-7/8”
MC-67041/2” x 5/8”
MC-67121/4” x 11/16”
MC-67201/2” x 3/4”
MC-67281/2” x 3/4”
MC-67365/8” x 3/4”
MC-67527/16” x 7/8”
MC-676011/16” x 1”
MC-67683/8” x 1”
MC-67761/4” x 1”
MC-67861/2” x 1-1/4”
MC-67445/8” x 3/4”
PARTING BEADS, ROUNDS & 1/2 ROUNDS 800.478.9500
Page 114 All Profiles Available As A CAD File
MC-69045/16” x 7/8”
MC-69083/8” x 1-3/8”
MC-69121/2” x 1-1/16”
MC-69161/2” x 1-5/8”
MC-69203/4” x 1-1/4”
MC-69243/4” x 1-1/4”
MC-69363/4” x 3/4”
MC-69481/2” x 1”
MC-69523/4” x 1-1/2”
MC-69561/2” x 1-3/4”
MC-69603/4” x 1-3/4”
MC-69641” x 2-1/2”
MC-69685/8” x 1-1/4”
MC-69721/2” x 1-3/4”
MC-69841/2” x 2”
MC-69763/8” x 1”
MC-69801/2” x 1-3/8”
MC-69443/8” x 3/4”
BASE BLOCKS800.478.9500
Page 115All Profiles Available As A CAD File
MC-70081” x 4-5/8”
MC-70241” x 5-1/2”
MC-70401-3/8” x 5-1/2”
MC-70481” x 6”
MC-70561-1/4” x 6-5/8”
BASE BLOCKS 800.478.9500
Page 116 All Profiles Available As A CAD File
MC-70671” x 7”
MC-70781” x 7-7/8”
MC-70961-1/16” x 9-1/4”
BACK BANDS800.478.9500
Page 117All Profiles Available As A CAD File
MC-71001” x 1-1/16”
MC-71041” x 1-1/8”
MC-71131-1/8” x 1-1/8”
MC-71291-1/16” x 1-3/16”
MC-71461” x 1-1/4”
MC-71521” x 1-1/4”
MC-71611” x 1-3/8”
MC-71691-1/16” x 1-3/8”
MC-71761-1/8” x 1-3/8”
MC-71841-1/4” x 1-3/8”
MC-71961-1/8” x 1-7/16”
MC-72181-5/8” x 1-1/2”
MC-72281-3/8” x 1-5/8”
MC-72371-3/8” x 1-11/16”
MC-72061-3/8” x 1-1/2”
BRICK MOULDS 800.478.9500
Page 118 All Profiles Available As A CAD File
MC-73041-3/8” x 1-1/2”
MC-73081-1/4” x 2”
MC-73121-1/4” x 2-1/16”
MC-73161” x 2-1/4”
MC-73201-7/16” x 2-1/4”
MC-73241-7/16” x 2-1/4”
MC-73281-7/16” x 2-1/4”
MC-73361-3/8” x 3-3/8”
MC-73401-1/4” x 3-1/2”
MC-73442-1/4” x 3-1/2”
MC-73321-1/2” x 2-1/4”
SILLS800.478.9500
Page 119All Profiles Available As A CAD File
MC-74041” x 1-9/16”
MC-74101-1/8” x 2”
MC-74141-1/16” x 2-3/8”
MC-74341-1/2” x 2-3/4”
MC-74441-7/16” x 3-1/4”
MC-74541-1/4” x 4-9/16”
MC-74241-7/8” x 2-1/2”
STOOLS 800.478.9500
Page 120 All Profiles Available As A CAD File
MC-75091” x 1-1/2”
MC-75201-1/16” x 2-7/8”
MC-75323/4” x 3-1/2”
MC-75363/4” x 3-1/2”
MC-75461” x 5”
THRESHOLDS & JAMBS800.478.9500
Page 121All Profiles Available As A CAD File
MC-755611/16” x 2”
MC-75641-1/4” x 3-1/8”
MC-757211/16” x 3-1/2”
MC-75781-1/2” x 3-1/4”
MC-75841-3/8” x 4-1/4”
MC-75961-1/4” x 7-1/16”
MISCELLANEOUS TRIMS 800.478.9500
Page 122 All Profiles Available As A CAD File
MC-76041/2” x 3/4”
MC-76123/4” x 1”
MC-76243/16” x 1-1/8”
MC-76361-1/8” x 1-1/4”
MC-76481-1/4” x 1-1/4”
MC-76571-1/4” x 1-1/4”
MC-766913/16” x 1-5/16”
MC-76781-5/16” x 1-5/16”
MC-76943/4” x 1-7/16”
MC-77023/4” x 1-1/2”
MC-77101-3/16” x 1-1/2”
MC-77141-13/16” x 2-1/8”
MC-77203/4” x 1-3/4”
MC-77281/2” x 1-7/8”
MC-77345/8” x 2”
MISCELLANEOUS TRIMS800.478.9500
Page 123All Profiles Available As A CAD File
MC-77461” x 2-3/16”
MC-77541” x 2-1/4”
MC-77401-1/2” x 2”
MC-77763/4” x 3”
MC-77681-3/8” x 2-7/16”
MC-77933/4” x 3-1/4”
MC-77843/4” x 3-1/8”
MC-78015/8” x 3-3/8”
MC-78073/4” x 3-1/2”
MISCELLANEOUS TRIMS 800.478.9500
Page 124 All Profiles Available As A CAD File
MC-78133/4” x 3-1/2”
MC-78349/16” x 4”
MC-78423/4” x 4-1/16”
MC-78222” x 3-5/8”
MC-7854 Newel Cap2-3/8” x 4-3/8”
MISCELLANEOUS TRIMS800.478.9500
Page 125All Profiles Available As A CAD File
MC-78761-3/4” x 4-9/16”
MC-78931-1/16” x 5-1/4”
RAILS & CAPS 800.478.9500
Page 126 All Profiles Available As A CAD File
MC-80041-1/8” x 1-3/4”
MC-80091-1/2” x 2”
MC-80191-5/16” x 2-7/16”
MC-80341-7/16” x 2-7/16”
MC-80391-3/8” x 2-1/2”
MC-80242-1/4” x 2-3/8”
MC-80292-1/4” x 2-3/8”
MC-80141-5/16” x 2-3/16”
RAILS & CAPS800.478.9500
Page 127All Profiles Available As A CAD File
MC-80441-1/2” x 2-9/16”
MC-80492-1/2” x 2-1/4”
MC-80531-13/16” x 2-11/16”
MC-80612-1/8” x 2-3/4”
MC-80571-1/2” x 2-3/4”
MC-80461-1/2” x 2-9/16”
RAILS & CAPS 800.478.9500
Page 128 All Profiles Available As A CAD File
MC-80651-7/8” x 2-13/16”
MC-80692-3/16” x 2-13/16”
MC-80731-3/8” x 3”
MC-80761-3/4” x 3”
MC-80811-3/4” x 3”
MC-81131-3/16” x 4”
MC-80853” x 3-3/16”
RAILS & CAPS800.478.9500
Page 129All Profiles Available As A CAD File
MC-80891-7/16” x 3-5/16”
MC-80931-5/8” x 3-3/8”
MC-81012” x 3-1/2”
MC-81052-3/16” x 3-1/2”
MC-80972-15/16” x 3-7/16”
MC-81092-1/2” x 3-1/2”
RAILS & CAPS 800.478.9500
Page 130 All Profiles Available As A CAD File
MC-81181-7/16” x 4-3/8”
MC-81281-7/16” x 4-1/2”
MC-81327/8” x 4-3/4”
MC-81232-1/4” x 4-3/8”
RAILS & CAPS800.478.9500
Page 131All Profiles Available As A CAD File
MC-81362-1/2” x 4-13/16”
MC-81401-3/8” x 4-7/8”
MC-81441-1/2” x 5-7/16”
RAILS & CAPS 800.478.9500
Page 132 All Profiles Available As A CAD File
MC-81481-1/2” x 5-1/2”
MC-81561-1/2” x 5-1/2”
MC-81601-1/2” x 5-9/16”
MC-81521-5/8” x 5-5/8”
RAILS & CAPS800.478.9500
Page 133All Profiles Available As A CAD File
MC-81681-1/2” x 5-5/8”
MC-81641-5/8” x 5-9/16”
MC-81721-1/2” x 5-3/4”
RAILS & CAPS 800.478.9500
Page 134 All Profiles Available As A CAD File
MC-81761-7/16” x 6”
MC-81841-15/16” x 6-3/4”
MC-81801-5/8” x 6”
RAILING SHOES800.478.9500
Page 135All Profiles Available As A CAD File
MC-82047/16” x 2-1/4”
MC-82081-1/8” x 2-1/2”
MC-82121/2” x 3-1/16”
MC-82201-9/16” x 2-3/4”
MC-82163/4” x 3-1/16”
CABINET TRIM 800.478.9500
Page 136 All Profiles Available As A CAD File
MC-83137/8” x 1-7/16”
MC-83221-3/16” x 1-7/16”
MC-83303/4” x 1-5/8”
MC-83381-1/4” x 2-1/16”
MC-83483/4” x 2-1/4”
MC-836013/16” x 2-1/2”
MC-837213/16” x 2-9/16”
T & G PROFILES800.478.9500
Page 137All Profiles Available As A CAD File
MC-85041-7/16” x 1-7/16”
MC-851211/16” x 2”
MC-85205/8” x 2”
MC-85283/4” x 2”
MC-85361/2” x 2-1/8”
MC-85443/4” x 2-1/4”
MC-85561/2” x 2-1/2”
MC-85683/4” x 2-1/2”
MC-858211/16” x 2-15/16”
MC-85971/2” x 3-3/8”
MC-86059/16” x 3-5/16”
MC-858311/16” x 1-1/2”
T & G PROFILES 800.478.9500
Page 138 All Profiles Available As A CAD File
MC-86153/4” x 3-3/4”
MC-86263/4” x 3-3/4”
MC-86343/4” x 3-3/4”
MC-864611/16” x 3-7/16”
MC-86573/4” x 3-5/8”
MC-867011/16” x 3-11/16”
MC-86841/2” x 3-7/8”
MC-87025/8” x 4-1/4”
T & G PROFILES800.478.9500
Page 139All Profiles Available As A CAD File
MC-87341/4” x 5”
MC-87423/4” x 5-1/16”
MC-87743/4” x 5-9/16”
MC-87855/8” x 5-9/16”
MC-87963/4” x 5-1/2”
MC-88183/4” x 6-1/2”
MC-87561-1/2” x 5-1/4”
T & G PROFILES 800.478.9500
Page 140 All Profiles Available As A CAD File
MC-88313/4” x 7-1/4”
NOTES800.478.9500
Page 141All Profiles Available As A CAD File
NOTES 800.478.9500
Page 142 All Profiles Available As A CAD File
NOTES800.478.9500
Page 143All Profiles Available As A CAD File
14582 172nd Drive S.E.Monroe, WA 98272
www.millworkconcepts.com
800.478.9500 l 360.794.1621 l 360.794.6244 fax