Architectural Interior Millwork
-
Upload
jaski-singh -
Category
Documents
-
view
217 -
download
0
description
Transcript of Architectural Interior Millwork
2012
www.panelplus.co
ARCHITECTURAL INTERIOR MILLWORK
Q-684
pgs. 684-767
Q
Architectural Interior M
illwork
Base Mouldings
Cornice Mouldings
Case MouldingsBase Mouldings serve as a decorative finish where the walls meet the floor and also serve to protect walls when cleaning floors. Offered in several styles and forms. Choose a size that compliments the room.
Decorative Corners eliminate time consuming and difficult miter cuts while creating additional points of architectural interest. Available for cornice and panel mouldings, create unique, eye catching decor with ease.
• DEM - pg. 717
• DEM - pgs. 718-721• Focal Point - pg. 763• Orac® - pgs. 750-753 • Orac® - pgs. 744-747
• DEM - pg. 703
• DEM - pg. 716
• Decorative Cornice Mouldings • DEM - pgs. 688-696 • Focal Point - pg. 761 • Orac® - pgs. 734-735• Plain Cornice Mouldings • DEM - pgs. 697-701 • Focal Point - pg. 761 • Orac® - pgs. 731-733
Ceiling Medallions Columns
DecorativeCorners
Domes
Cornice mouldings finish off a room like no other moulding can. They guide the eye upward throughout the room and elevate the decor from mundane to marvelous! With a wide array of styles and sizes to choose from. Cornice mouldings add value and style to every room.
Door Surrounds & Accessories
• DEM - pgs. 726-727• Focal Point - pgs. 768-799• Orac® - pg. 749
Highlight doors, passage ways, built-ins and more with a variety of casings, pilasters, headers and accessories.
Unsurpassed quality, design and character come to you in the Orac Decor® line of European crafted interior decorating products.
Both traditional and innovative in design the Orac Decor® line has been helping to create stunning interior design for decades. Available in cornice & panel mouldings, niches, medallions, pilasters and more.
Value and design come together in creating a line of polyurethane millwork designed to give all your projects a distinctive designer finish.
The DEM line offers deep, crisp detailing and considerable savings while maintaining superb quality in crown mouldings, panel mouldings, medallions, niches, domes and more.
Fine details and expressive designs best describe the Focal Point line of Architectural details.
Transform any room from ordinary to extraordinary with Focal Points full line of products.
“Art For Your Ceiling”... medallions come in a wide array of styles from classical to contemporary. Available in many sizes, medallions can be used with a light fixture or stand alone as an architectural feature.
Domes can change the very feel and shape of a room. Available with a choice of decorative rims and wide range of sizes. Many domes can be enhanced by adding a medallion.• DEM - pgs. 798-799• Focal Point - 800-801• Orac® - pg. 802
Architectural trim is a defining feature in any room, whether formal or casual. Door & window casings set the tone. We offer ten profiles to accommodate the scale & proportion of most rooms.
Our decorative polyurethane columns are lightweight, easy to install & have sharp, crisp detailing. Mix & match plain & fluted shafts with decorative capitals & plinths in creating your perfect column. Half columns are ideal for use as post surrounds & pilasters.
®
Q-685
Mitreless Crown& Panel Mouldings
Panel Mouldings
Niches
Pilasters
Stair Brackets
• DEM - pgs. 711-714• DEM - pg. 728• Focal Point - pgs. 764-765• Orac® - pg. 740
• DEM - pgs. 724-725• Orac® - pgs. 742-743
• DEM - pg. 721• Focal Point - pg. 762
• Common Mouldings • DEM - pg. 715• Decorative Panel Mouldings • DEM - pgs. 706-708 • Orac® - pgs. 737, 739• Friezes • DEM - pg. 708 • Focal Point - pg. 762• Plain Panel Mouldings • DEM - pgs. 709-710 • Orac® - pgs. 736, 739
Flexible Mouldings
• “Made to Fit” Mouldings - pgs. 766-767• Orac® - pg. 741
Library Facade System
• Orac® - pg. 749
Trim-Fast™The Mitre-Free Corbel System
• pg. 704
Raised Panels
• Orac® Raised Panels - pg. 756
Wall Decorations, Shelves & Pediments
• Corbels • Orac® - pg. 757•Pediments • Orac® - pg. 754• Wall Decorations & Shelves • Orac® - pg. 754• Wall Light Sconces • Orac® - pg. 757
Achieve radii never before possible with a selection of flexible & “made to fit” mouldings in casings, crowns, panels, ropes & more.
Mitreless corner & butt joints allow for ease of installation while helping to conceal any imperfections on moulding edges, all while adding decorative interest.
Create elegant paneled walls & ceilings or for use as a chair rail, panel mouldings is offered in designs from simple & clean to highly decorative. Many are available with decorative corners & embellishments.
Reminiscent of the great mansions of Europe, our stair brackets are available in “right” or “left” configuration. Make your staircase a focal point of your home.
Create the look of high end custom built-ins & alcoves by finishing off with our Library Facade System. Compromised of casings, plinth, caps, elgantly atching corners & keystones, turn away ordinary wall recess into an architecturally detailed focal point.
Niches lend a sense of depth & elegance to a room. Not only do they add great architectural interest, they can display a treasured item. From small to massive & simple to ornate, we offer a large selection.
Pilasters are often used as a door surround with a header, or to create the look of “Flat” column within a room. We offer many sizes to fit the scale of your project in both plain & highly decorative styles.
A variety of pediments, swags, bows & tassels, corbels, light sconces, shelves & more are offered to create a distinctive customized look with European flair & charm.
Fireplace Surrounds
• Orac® Fireplaces - pg. 756
Two classic designs are available for decorative use. Beautifully detailed surrounds are made as a three piece set with mantle & two legs.
Used along with a chair rail & base moulding, our raised panels can easily transform a plain wall into a rich & sophisticated wainscoting. Take a simple flat door & turn it into a customized raised panel door.
Installing crown moulding has never been easier with our Trim-Fast ™ Mitre-Free “hand & glove” corbel & crown moulding system. Inside, outside & center corbels allow moulding to slide & lock into place, eliminating the need for mitering & traditional time consuming installation methods.
Q-686
Moulding Samples Available...
Please Inquire
RPS 100% Recycled High Density Mouldings, which are impervious to adverse climate and weather conditions, offer an economical decorative and design medium that are manufactured from renewable polystyrene resources. Introduced as a cost effective alternative to more costly polymer mouldings and millwork, RPS Mouldings will aesthetically satisfy all decorative requirements without having to compromise for lesser quality mouldings. The polystyrene compound from which RPS Mouldings are manufactured, not only produces a durable, impact resistant surface, making them ideally suited for use in highly trafficked environments, RPS Mouldings can be easily cut, nailed, glued, finished and installed using the same woodworking techniques and tools as wood and mdf mouldings & millwork.
Discover new atmospheres and styles with high quality interior products.
Lightweight, easy to install, easy to paint.Duropolymer®: The Advanced Polystyrene Composite Blend from which Duropolymer® Mouldings are manufactured, not only produces an extremely durable, impact resistant surface, making Duropolymer® Mouldings ideally suited for use in highly trafficked environments. They can be easily cut, nailed, glued, finished and installed using the same woodworking techniques and tools as wood and mdf mouldings & millwork. Duropolymer® Mouldings, which are impervious to adverse climate and weather conditions, comprise an environmentally friendly, ecologically responsible water based primer coat that is produced without the use of any solvents. In addition, Duropolymer® Mouldings have sharply defined details, perfect dimensions, and extremely consistent quality, enabling them to endure years of repeated refinishing.
Value and Design come together to create a line of millwork designed to give all your projects a distinctive finish...a designers finish.
DistinctiveMouldings
Polyurethane DEM Mouldings
Duropolymer® CX/PX/SX Mouldings
Polystyrene High Density RPS Mouldings
DEM Mouldings and Millwork encompass a full decorative array of premium quality polyurethane cornice and panel mouldings, medallions, niches, stair brackets, pilasters and other ornamental products that are guaranteed to satisfy all decorative requirements without compromise. DEM is impervious to adverse climate and weather conditions, and, because of its dimensional stability, will not alter over time. Produced in exclusive molds that yield ornate and sharply defined details, perfect dimensions, and extremely consistent quality, DEM is lightweight, impact resistant and easy to install and finish using traditional woodworking techniques and tools.
* Yields are approximate and based on average conditions and installation technique.
XtraBond®9500The “Original” Hybrid Formula
XtraBond®9500 is a high performance, one component, permanently flexible, easy to use, multi-purpose fast cure modified polyurethane sealant. XtraBond®9500 cures rapidly when exposed to atmospheric moisture to form a durable bond.
• Use as adhesive or filler• Eco-friendly, low VOC’s• Fast cure • Paintable • Non-yellowing
NEW!
ADH1 per 10.6 oz tube PL Premium AdhesiveApproximate adhesive yields*Mouldings 2” + Under – 60’Mouldings 2 - 5” – 45’Mouldings 5” + Over – 30’
Duropolymer® AdhesiveFDP-500
310ml cartridge (10-1/2 oz.)
XB-9500
Q-687
Q-688
94-1/2” Length Design Repeat: 2-1/2”
94-1/4” Length Design Repeat: 1-7/8”
94-1/2” Length Design Repeat: 3-15/16” 96” Length Design Repeat: 1”
94-1/2” Length Design Repeat: 3/8”
94-1/2” Length Design Repeat: 1/2”
2”
2”2-3/4”
1-1/4”
2-5/8”2-7/8”
2-1/8”
2-1/8”
3”
2-1/8”
3-1/8”
2-3/8”
2-5/8”
2-3/8”
3-1/2” 3-5/8”
2”
3-1/8”
96” Length Design Repeat: 1-1/4”
2-3/4”
3-7/8”3-7/8”
3-15/16”
96” Length
96” Length 96” Length
DEM-107
DEM-111
DEM-114
DEM-115
DEM-113
DEM-105
DEM-116
CX101 Duropolymer®
CX135 Duropolymer®
CX136 Duropolymer®
100% RECYCLED POLYSTYRENE
DECORATIVE CORNICES
All dimensions are approximate.
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
Q-689
94-1/2” Length Design Repeat: 1-1/2”
2-3/4”
4-1/8”
3-1/8”
INSIDEDEM-122-A
OUTSIDEDEM-122-B
Pre-mitered corners96” Length Design Repeat: 1-15/16”
3”
3-3/8”
4-1/2”
94-1/2” Length Design Repeat: 3/4”
3”
4-1/8”
3”
INSIDEDEM-120-A Pre-mitered corners
OUTSIDEDEM-120-B
96” Length Design Repeat: 3/4”
3”
4-1/8”
3”
96” Length Design Repeat: 1”
3”
3-1/8”
4-9/16”
96” Length Design Repeat: 3-1/4”
2-3/4”
2-3/4”
4”
DEM-122
CORNERSDEM-125
DEM-120
CORNERSRPS-1120
DEM-121
DEM-117
100% RECYCLED POLYSTYRENE
DECORATIVE CORNICESPolyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
•HigH impact• Recommended blade 10” Blade, 200 teeth
information can be found on page 686DuROpOlymER®&
All dimensions are approximate.
Q-690
94-1/2” Length Design Repeat: 8”
2-1/2”
4-1/2”5”
94-1/2” Length Design Repeat: 31-1/2”
2”
5”4-1/2”
94-1/2” Length Design Repeat: 4-1/2”
3-5/8”
3-1/8”
4-13/16”
INSIDEDEM-130-A
OUTSIDEDEM-130-BPre-mitered corners94-1/2” Length Design Repeat: 7” Corbel to Corbel
3-1/2”4-3/4”
3-1/4”
94-1/2” Length Design Repeat: 1”
4-5/8”
3-1/2”
3-1/8”
94-1/2” Length Design Repeat: 1-1/2”
3-3/8”
5”
3-3/4”
OUTSIDEDEM-136-BINSIDE
DEM-136-A Pre-mitered corners
DEM-134
DEM-132
DEM-130
CORNERSDEM-131
DEM-136
CORNERS
DEM-126
100% RECYCLED POLYSTYRENE
DECORATIVE CORNICESPolyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
All dimensions are approximate.
NEW!
Q-691
2-9/16”
4-3/4”
5-1/2”
96” Length Design Repeat: 6”
4-1/8”
3-3/4”
5-1/2”
94-1/2” Length Design Repeat: 12”
5-1/8”
3-7/8”
3-3/8”
INSIDEDEM-142-A
OUTSIDEDEM-142-B
Pre-mitered corners
94-1/2” Length Design Repeat: 1-5/8”
3”
5”6”
94-1/2” Length Design Repeat: 4-1/2”
3-1/8”
4-1/2”5-1/2”
INSIDEDEM-146-A
OUTSIDEDEM-146-B
Pre-mitered corners
96” Length Design Repeat:
2-3/8”
94-1/2” Length Design Repeat: 3-1/2”
4-3/4”
6”3-3/4”
(Dot Repeat 3/8” wide x 3 dots per inch)
96” Length 96” Length
DEM-147
DEM-149
DEM-142 CORNERS
DEM-148
DEM-146
CORNERS
DEM-143
CX128 Duropolymer®
CX129 Duropolymer®
100% RECYCLED POLYSTYRENE
DECORATIVE CORNICESPolyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
All dimensions are approximate.
NEW!
Q-692
96” Length Design Repeat: 3-7/8”
3-7/8”
4-5/8”
6”
95-3/4” Length Design Repeat: 5/8”
3-15/16”
5-5/8” 3-15/16”
96” Length Design Repeat: 5-1/16”
3-15/16”
6” 4-1/2”
94-1/2” Length Design Repeat: 6”
2-3/8”
6”5-1/2”
94-1/2” Length Design Repeat: 3-15/16”
3-5/8”
5-3/8”
3-15/16”
INSIDEDEM-151-A
OUTSIDEDEM-151-B
Pre-mitered corners
96” Length Design Repeat: 1-5/8”
4”
4”5-1/2”
DEM-157
DEM-155
DEM-156
DEM-151
DEM-150
DEM-153
CORNERS
100% RECYCLED POLYSTYRENE
DECORATIVE CORNICESPolyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
All dimensions are approximate.
Q-693
94-1/2” Length Design Repeat: 3”
4-1/4”
4-3/4”
6-3/8”
96” Length Design Repeat: 12”
2-1/2”
5-7/8”
6-7/16”
96” Length Design Repeat: 3-3/8”
4-3/8”
5”6-1/2”
94-1/2” Length Design Repeat: 11-3/4”
6-5/8”
3-3/4”
5-1/2”
94-1/2” Length Design Repeat: 19”
4-5/8”
6-1/2”
4-1/2”
INSIDEDEM-162-A
OUTSIDEDEM-162-B
Pre-mitered corners
96” Length Design Repeat: 3-3/4”
2-1/2”
6-1/2”
7”
DEM-169
96” Length
DEM-158 DEM-159
DEM-162
DEM-160
CORNERS
DEM-161
CX107 Duropolymer®
100% RECYCLED POLYSTYRENE
DECORATIVE CORNICESPolyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
All dimensions are approximate.
Q-694
5-1/4”
7”
5-1/2”
94-1/2” Length Design Repeat: 2” 96” Length Design Repeat: 1-1/4”
5-3/16”
7”4-3/4”
94-1/2” Length Design Repeat: 2”
5”
5-1/8”
7”
94-1/2” Length Design Repeat: 6”
INSIDEDEM-174-A
OUTSIDEDEM-174-B
Pre-mitered corners96” Length Design Repeat: 9-1/2”
2-3/4”
6-7/8”
7-3/8”
5-3/8”
5-1/4”7-1/2”
94-1/2” Length Design Repeat:11-1/2”’
6-1/4”
8”5-1/4”
DEM-170
DEM-171
DEM-172
DEM-174
CORNERSDEM-175
DEM-177
100% RECYCLED POLYSTYRENE
DECORATIVE CORNICESPolyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
All dimensions are approximate.
NEW!
Q-695
96” Length Design Repeat: 3-1/4”
5-1/2”
7-7/8”
9-5/8”
94-1/2” Length Design Repeat: 6-1/4”
6-5/8”
9-1/8”
6-1/2”
94-1/2” Length Design Repeat: 4”’
5-1/8”
6-7/8”8-1/2”
95-5/8” Length Design Repeat: 1-3/8”
6”
6-3/8”
8-7/8”
96” Length Design Repeat: 5-1/2”
5-1/4”
8-5/8”
6-15/16”
DEM-183
DEM-182
DEM-178
DEM-180
DEM-179
94-1/2” LengthDesign Repeat:
4-1/8”
8-7/8”
7”11-1/4”
DEM-184
DECORATIVE CORNICES
All dimensions are approximate.
100% RECYCLED POLYSTYRENEPolyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
Q-696
95-1/2” Length Design Repeat:
9-5/8”
6-5/16”
7-7/8”10-1/16”
96” Length Design Repeat:
9-1/2”
11-1/8”
11-15/16”16-5/16”
CAN ACCOMMODATE 10 CORBELS
MOULDING WITHOUT CORBEL
CORBELS
3-7/8” x 2-13/16” x 2-3/4” 4” x 2-3/4” x 2-5/8”
94-1/2” Length Design Repeat:
7-7/8”
9”
12-1/2”
8-5/8”
96” Length Design Repeat: 9-1/2”
11-1/8”
11-15/16”16-5/16” with
attached corbel
96” Length Design Repeat: 14”
DEM-188
DEM-185
DEM-190
DEM-190A DEM-190B
Corbels are easily applied
with our adhesiveADH1
10.6 oz tube
DEM-186
DEM-189
9”
3-7/8”
10”
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
100% RECYCLED POLYSTYRENE
LARGE DECORATIVE CORNICES
All dimensions are approximate.
NEW!
Q-697
2-1/4”
1-1/8”
2-1/4”
1-1/8”
1-3/4”
1-3/4”
1-1/8”
1-1/4”
1-5/8”
96” Length
96” Length
96” Length
96” Length
5/8”
5/8”
5/8”
1-3/4”
1-3/8”
1-3/4”
96” Length
96” Length
96” Length
96” Length
96” Length
BED MOULDINGRPS-0075
RPS-0283
RPS-0201
BED MOULDINGRPS-0074 (8 Ft.) RPS-0074-12 (12 Ft.)
RPS-0284
CX111 Duropolymer®
CX132 Duropolymer®
CX115 Duropolymer®
CX110 Duropolymer®
CX109 Duropolymer®
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
100% RECYCLED POLYSTYRENE
PLAIN CORNICES
All dimensions are approximate.
•HigH impact• Recommended blade 10” Blade, 200 teeth
information can be found on page 686DuROPOLymER®&
Q-698
94-1/2” Length
3-1/2”
2-1/2”
2-1/2”
96” Length3-1/2”
2-1/2”
2-1/2”
2”
2”
2-7/8”
2-1/2”
2-1/2”
3-1/2”
3”
2”
3-1/2”
3”
3”4-1/8”
INSIDEDEM-220-A
OUTSIDEDEM-220-B
Pre-mitered corners
94-1/2” Length
INSIDEDEM-220-A
OUTSIDEDEM-220-B
Pre-mitered corners
96” Length
96” Length
96” Length
CX112 Duropolymer®
RPS-0049 (8 Ft.) RPS-0049-12 (12 Ft.)
RPS-0207 (8 Ft.) RPS-0207-12 (12 Ft.)
DEM-210
RPS-2210 (8 Ft.) RPS-2210-12 (12 Ft.)
RPS-0189
CX108 Duropolymer®
CX100 Duropolymer®
CORNERS
DEM-220
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
100% RECYCLED POLYSTYRENE
PLAIN CORNICES
•HigH impact• Recommended blade 10” Blade, 200 teeth
information can be found on page 686DuROPOLymER®&
All dimensions are approximate.
Q-699
94-1/2” Length
3-1/8”
3-1/2”4-3/4”
94-1/2” Length
3-1/2”
4-7/8”
3-3/8”
94-1/2” Length
3-1/8”
4-1/2”3-1/8”
INSIDEDEM-225-A
OUTSIDEDEM-225-B
Pre-mitered corners
96” Length
3-1/8”
4-1/2”3-1/8”
4-5/8”
3-1/8”
3-1/8”
5-1/8”
3-3/4”
3-3/4”
94-1/2” Length
3-1/8”
4-1/2”3-1/8”
INSIDEDEM-225-A
OUTSIDEDEM-225-B
Pre-mitered corners
94-1/2” Length
5-5/8”
5-3/8”
2-1/8”
96” Length
96” Length
DEM-230
DEM-235
DEM-225
RPS-2225
DEM-240
RPS-0183 (8 Ft.) RPS-0183-12 (12 Ft.)
RPS-0045 (8 Ft.) RPS-0045-12 (12 Ft.)
CORNERS
CX123 Duropolymer®
CX127 Duropolymer®
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
100% RECYCLED POLYSTYRENE
PLAIN CORNICES
•HigH impact• Recommended blade 10” Blade, 200 teeth
information can be found on page 686DuROPOLymER®&
All dimensions are approximate.
Q-700
94-1/2” Length
5”
6-1/2”
4-1/8”
INSIDEDEM-255-A
OUTSIDEDEM-255-B
94-1/2” Length
6”
4-1/8”7-1/4”
96” Length
5-3/4”
5-3/4”
94-1/2” Length
5”
5”7”
96” Length
6-7/8”
4-7/8”
4-3/4”
94-1/2” Length
4-3/4”
4-3/8”6-1/2”
Pre-mitered corners
96” Length
96” Length
94-1/2” Length
3-15/16”
3-15/16”
5-1/2”
DEM-255
CORNERS
DEM-270
DEM-271
DEM-265
DEM-260
DEM-250
94-1/2” Length
5-3/4”
6-1/2”8-5/8”
DEM-272
CX106 Duropolymer®
Great for indirect lighting
DEM-244
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
100% RECYCLED POLYSTYRENE
PLAIN CORNICES
All dimensions are approximate.
Q-701
94-1/2” Length
94-1/2” Length
7-7/8”
5-5/16”9-1/2”
7”
9-3/4”
6-3/4”
96” Length
9-13/16”
9-13/16”14”
96” Length
8-3/4”
8-3/4”12-3/8”
INSIDEDEM-273-A
OUTSIDEDEM-273-B
Pre-mitered corners
DEM-275
DEM-273
DEM-283
DEM-280
CORNERS
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
100% RECYCLED POLYSTYRENE
LARGE PLAIN CORNICES
All dimensions are approximate.
Q-702
4-7/8”
6-3/8”4-3/4”
DEM-260DEM-260C
7”
9-3/4”
6-3/4”
DEM-275DEM-275C
Crown Moulding
DEM-260V and DEM-275V can be mitered to create 1 inside corner
Inside “V” Corner Moulding
Combination Moulding
Application
94”
Each 94” piece can yield 1 inside corner
Two Sizes Available
94-1/2” Length
CrownInsIDE “V” MoulDIng
DECorAtIVE CEntEr
InsIDE “V” MoulDIng
All dimensions are approximate.
DEM-260V 94” DEM-275V 94”
DEM-260C 96” DEM-275C 94-1/2”
Decorative Center Moulding
DEM-260 96”DEM-275 94-1/2”
Polyurethane DEM Mouldings Polystyrene rPs Mouldings 100% RECYCLED POLYSTYRENE
COMBINATION MOULDINGS
Q-703
4” W
DEM-15 DEM-16 DEM-17
DEM-10 DEM-11 DEM-12
3-1/8” W
DEM-18 DEM-19 DEM-20
4-3/4” W
DEM-21 DEM-22 DEM-23
4-3/4” W
DEM-13 DEM-14
Works with our DEM Mouldings:DEM-220...page 698DEM-225...page 699DEM-230...page 699
DEM-115...page 688DEM-116...page 688DEM-117...page 689DEM-121...page 689
DEM-125...page 689DEM-126...page 690DEM-130...page 690DEM-136...page 690
Works with our RPS Mouldings:RPS-2225...page 699RPS-0049...page 698
RPS-0183...page 699RPS-2210...page 698
Works with our DEM Mouldings:DEM-225...page 699DEM-230...page 699
DEM-117...page 689DEM-120...page 689DEM-122...page 689
DEM-130...page 690DEM-220...page 698
Works with our RPS Mouldings:RPS-2225...page 699RPS-0049...page 698
RPS-0189...page 698RPS-1120...page 689RPS-2210...page 698
Works with our DEM Mouldings:DEM-115...page 688DEM-116...page 688
DEM-105...page 688DEM-111...page 688
DEM-113...page 688DEM-114...page 688
Works with our RPS Mouldings:RPS-2210...page 698RPS-0049...page 698
RPS-2210...page 698RPS-0189...page 698RPS-0207...page 698
Works with our DEM Mouldings:DEM-157...page 692DEM-235...page 699DEM-244...page 700
DEM-121...page 689DEM-132...page 690DEM-142...page 691
DEM-143...page 691DEM-146...page 691DEM-150...page 692
Works with our RPS Mouldings:RPS-0045...page 699 RPS-0183...page 699
Works with our DEM Mouldings:DEM-235...page 699DEM-244...page 700
DEM-125...page 689DEM-142...page 691DEM-143...page 691
DEM-146...page 691DEM-150...page 692DEM-157...page 692
Works with our RPS Mouldings:RPS-0045...page 699 RPS-0183...page 699
OUTSIDE CORNER3” H 4-1/8” Proj.
CENTER3” H 3” Proj.
INSIDE CORNER3” H 4-1/8” Proj.
OUTSIDE CORNER 4-3/4” H 6-3/4” Proj.
CENTER 4-3/4” H 4-5/8” Proj.
INSIDE CORNER 4-3/4” H 6-3/4” Proj.
OUTSIDE CORNER4-3/4” H 6-1/2” Proj.
CENTER4-3/4” H 4-3/4” Proj.
INSIDE CORNER4-3/4” H 6-1/2” Proj.
OUTSIDE CORNER 4” H 5-1/4 Proj.
CENTER 4” H 4” Proj.
INSIDE CORNER 4” H 5-1/4” Proj.
OUTSIDE CORNER 3-3/4” H5” Proj.
INSIDE CORNER 3-3/4” H5” Proj.
Polyurethane DEM Mouldings Polystyrene RPS Mouldings 100% RECYCLED POLYSTYRENE
DECORATIVE CORNERS
Q-704
CORBELS: ALLOWS FOR MITER-FREE SYSTEM
OUTSIDE CORBEL
INSIDE CORBEL
CENTERCORBEL
H PATENT PENDING
The Industries Only Miter-Free, Interlocking Corbel & Crown Moulding System!
2-3/8”
2-1/2”3-1/2”
3”
2-1/16”
3-1/2”
• Corbels work with corresponding mouldings only.• Mouldings should be cut approximately 3/4” longer than spacing of corbels and snapped into place.
Solid wood corbels are available for inside corners, outside corners & center eliminating the need for complicated miter cuts & noticeable seems at butt joints.
Crowns & Corbels are finished in a satin white & can be painted with a quality latex paint if desired.
Simply fasten corbels to wall using included hardware.
Insert the crown moulding into the patent pending corbel system.
If You Can Hang A Drape, You Can Hang A Crown!
POLySTyRENE CROWN MOULDINGS: AVAILABLE IN 8 FT. LENGTHS
Runs longer than 4 ft. between corbels may require addtitional securing to walls/ceilings to achieve a flat, gapless installation.
There is no need for time consuming nailing, gluing, & caulking of crown moulding when corbels are used every 4 ft (& under).
Patented Hand & Glove System Allows Moulding To Be Inserted Into Position Concealing All The Mounting Hardware
FOR USE WITH TFM10PART # DESCRIPTION WIDTH HEIGHT PROJ.TF10-IC Inside Corbel 3-1/8” 4-1/2” 3-1/8”TF10-OC Outside Corbel 4-1/2” 4-1/2” 2-3/8”TF10-CC Center Corbel 4” 4-1/2” 2-3/8”
FOR USE WITH TFM20PART # DESCRIPTION WIDTH HEIGHT PROJ.TF20-IC Inside Corbel 2-3/4” 5” 2-3/4”TF20-OC Outside Corbel 4” 5” 2”TF20-CC Center Corbel 4” 5” 2”
TFM-20
TFM-10
NEW!
TRIM FAST™THE MITER-FREE CORBEL SYSTEM
Q-705
3-1/16”
6-3/16”
3-1/16”
6-3/16”
3-1/16”
6-3/16”
3-1/16”
• One piece pre-assembled, Corners & Centers.No need to construct your own center and outside corner, we’ve done the work for you, saving valuable time.
• Primed and ready for paint.• Lightweight and easy to install, corners and centers can be
cut with a saw, nail and glue just like wood.
Our corner and center blocks allow you to install cornice mouldings quickly and easily with no need for mitering. Adding these architectural embellishments will highlight the beauty and visual appeal that crown moulding offers.
7-3/4”
3-7/8”
3-7/8”
3-1/16”
13-3/4”
6-7/8”
6-7/8”
5-1/2”
Crown Moulding cannot exceed 6-3/4” height and 5-1/2” projection Many great crown options can be found on pages 693-694.
Crown Moulding cannot exceed 3-3/16” height and 3” projection Many great crown options can be found on pages 688-689.
Approximate adhesive yields*Mouldings 2” + Under – 60’Mouldings 2 - 5” – 45’Mouldings 5” + Over – 30’* Yields are approximate and based on average conditions and installation technique.
5-1/2”
5-1/2”
11-1/8”
5-1/2”
5-1/2”
5-1/2”
11-1/8”11-1/8”
3-1/16”
DEM-30InsIde
COrnerDEM-31Center
deM-32OUtsIde COrner
ADH1 10.6 oz tubePL Premium Adhesive
DEM-33InsIde
COrner
deM-34Center DEM-35
OUtsIde COrner
High density PolyurethaneLARGE DECORATIVE DROPS
All dimensions are approximate.
Q-706
Max Radius 8” 93” Length
Design Repeat: 7/8”
5/8”
1”
94-1/2” Length Design Repeat: 2-1/4”
7/8”
1-3/8”
3/8”
1-1/4”
94-1/2” Length Design Repeat: 1” Corner Available: DEM-305A, See Page 712
96” Length Design Repeat: 2-1/4”
7/8”
1-3/8”
96” Length Design Repeat: 1”Corner Available:
DEM-305A, See Page 712
3/8”
1-1/4”
94-1/2” Length Design Repeat: 2-1/2”
3/4”
1-5/8”
Corner Available: DEM-311A, See Page 712
1-1/8”
1-5/8”
94-1/2” Length Design Repeat: 10”Corner Available:
DEM-313A, See Page 712
94-1/2” Length Design Repeat: 2-3/8”
1”
1-7/8”
Corner Available: DEM-315A, See Page 713
96” Length
All dimensions are approximate.
DEM-303
DEM-303F - Flexible
DEM-307
DEM-305
RPS-3307
RPS-3305
DEM-311
96” Length Design Repeat: 7”
Over Corner Available: DEM-314A & DEM-314-L/R, See Page 712
DEM-314
1-7/8”
3/4”
PX130 Duropolymer®
DEM-313
DEM-315
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® PX Mouldings
100% RECYCLED POLYSTYRENE
DECORATIVE PANEL MOULDINGS
•HigH impact• Recommended blade 10” Blade, 200 teeth
information can be found on page 686DUROPOLyMER®&
NEW!
Q-707
94-1/2” Length Design Repeat: 1-3/4”
5/8”
2”
Corner Available: DEM-319A, See Page 713
96” Length 96” Length Design Repeat: 1-3/8”
7/8”
2”
Corner Available: DEM-320A, See Page 713
96” Length Design Repeat: 1-3/4”
5/8”
2”
Corner Available: DEM-319A, See Page 713
96” Length Design Repeat: 1-1/2”
96” Length Design Repeat: 1/2”
94-1/2” Length Design Repeat: 5-1/2”
1/2”
3”
96” Length Design Repeat: 7”
1-1/8”
3”
3/4”
2”
2-3/4”
1”
Dots 24 per 12”
2-3/8”
3/4”
94-1/2” Length Design Repeat: 1-3/8”Corner Available:
DEM-321A, See Page 713
94-1/2” Length Design Repeat: 1-1/4”
3/8”
2-1/2”
DEM-323
DEM-319
PX114 Duropolymer®
DEM-320
RPS-3319
DEM-321
DEM-322
DEM-326
DEM-327
DEM-328
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
100% RECYCLED POLYSTYRENE
DECORATIVE PANEL MOULDINGS
All dimensions are approximate.
•HigH impact• Recommended blade 10” Blade, 200 teeth
information can be found on page 686DUROPOLyMER®&
NEW!
NEW!
Q-708
3/4”
4-3/8”
96” Length Design Repeat: 12”
5/8”
5”
94-1/2” Length Design Repeat: 19”
7/8”
5-1/8”
96” Length Design Repeat: 5-1/8”
1”
7-1/16”
1”
7-1/16”
94-1/2” Length Design Repeat: 3”
3/8”
3”
96” Length Design Repeat: 12”
96” Length Design Repeat: 5”
1”
3-1/2”
94-1/2” Length Design Repeat: 6-1/4”
96” Length Design Repeat: 3/4”
3”
1”
94-1/2” Length Design Repeat: 4”
1-1/4”
4”
7-7/8”
1”
96” Length Design Repeat: 1”
3/4”
3-1/8”
94-1/2” Length Design Repeat: 1-3/4”Corner Available:
DEM-331A, See Page 675
Corner Available:
DEM-336A, See Page 713
DEM-333
DEM-334
DEM-335
DEM-392
DEM-390
DEM-381
DEM-331
DEM-397
DEM-332
DEM-330
DEM-336
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® CX Mouldings
100% RECYCLED POLYSTYRENE
DECORATIVE PANEL MOULDINGS
All dimensions are approximate.
Polyurethane DEM Mouldings Polystyrene RPS Mouldings 100% RECYCLED POLYSTYRENE
FRIEZES
NEW!
NEW! NEW!
NEW!
Q-709
1-1/8”
11/16”
1/2”
7/8”
3/8”
94-1/2” LengthCorner Available:
DEM-405A, See Page 714
3/4”
1-1/2”
96” Length
96” Length96” Length
11/16”
1-5/8”
Corner Available: DEM-400A, See Page 71496” Length
11/16”
1-5/8”
94-1/2” LengthCorner Available:
DEM-400A, See Page 71496” Length
7/16”
1-1/8”
1-3/8”
7/16”
96” LengthCorner Available:
DEM-405A, See Page 714
3/4”
1-1/2”
96” Length
Inside Radius Approximately 5”
DEM-405
BASE CAP RPS-0234
RPS-4400
DEM-400
BASE CAP RPS-0282
RPS-4405
BASE CAPRPS-0164
ASTRAGAL RPS-0167
96” Length
PX116 Duropolymer®
PX120 Duropolymer®
PX120A (8 pcs. per carton)A = 7-1/2” B = 2-1/4” C = 3/4”
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® PX Mouldings
100% RECYCLED POLYSTYRENE
PLAIN PANEL MOULDINGS
All dimensions are approximate.
•HigH impact• Recommended blade 10” Blade, 200 teeth
RPS PRODUCT information can be found on page 686
Q-710
2-5/8”
3/16”
11/16”
96” Length
94-1/2” Length
5/8”
2”
Corner Available: DEM-410A, See Page 714
1/2”
1-5/8”
96” Length
1/2”
1-5/8”
94-1/2” LengthCorner Available:
DEM-410A, See Page 714
96” Length
96” Length
94-1/2” Length
13/16”
2-9/16”
94-1/2” Length
7/8”
3-1/8”
1”
3-1/2”
96” Length94-1/2” Length
1”
3-3/8”
DEM-420
RPS-0298
RPS-0390
DEM-419
DEM-415
RPS-4410
DEM-410
PX113 Duropolymer®
PX102 Duropolymer®
DEM-425
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® PX Mouldings
100% RECYCLED POLYSTYRENE
PLAIN PANEL MOULDINGS
•HigH impact• Recommended blade 10” Blade, 200 teeth
information can be found on page 686DUrOPOLyMEr®&
All dimensions are approximate.
NEW!
Q-711
These products are decorative and designed to eliminate mitering and butt joints. The covers will hide any imperfections on moulding edges and save time on installation.
When two ends of material are joined by butting them together using adhesive and caulk or other type of filler. These items need to have a tight fit and may require sanding,build up and caulking.
Large 90º MitrelessCorner Cover
Small 90º MitrelessCorner Cover
Our corners allow for miscuts up to 1/4”
The 90˚ Mitreless Corner Cover & 180˚ Mitreless Straight Cover
The 90º Butt Joint Corner & 180˚ Straight Butt Joint
180º MitrelessStraight
Cover
90º Butt Joint Corner 180º Straight Butt Joint
Mitreless Cover & Butt Joint Corner
Polyurethane - DEM Mouldings 100% Recycled Polystyrene - RPS Mouldings
PANEL MOULDINGS / ACCESSORIES
All dimensions are approximate.
Q-712
14-1/4” x 14-1/4”
16” W x 18” HLeft and Right
8-7/8” x 8-7/8”
9” x 9”
90º Butt Joint Corners
Shown with DEM-314A
1-5/8” x 3/4” x 94-1/2”
11-1/2” x 11-1/2”
8-1/2” x 8-1/2”
90º Butt Joint Corner
1-1/4” x 3/8” x 94-1/2”
90º Butt Joint Corner 90º Mitreless Corner CoversNEW!
1-5/8” x 1-1/8” x 94-1/2” 1-7/8” x 3/4” x 96”
DEM-314A
DEM-314-L/R
DEM-311
DEM-311B
DEM-311A
DEM-305A
DEM-305.
DEM-313A
DEM-313 DEM-314
All dimensions are approximate.
Polyurethane - DEM Mouldings 100% Recycled Polystyrene - RPS Mouldings
PANEL MOULDINGS / ACCESSORIES
Q-713
10-1/2” x 11”
2-1/2” Dia. x 1/2” Thick
10” x 10” x 15/16”
12-3/4” x 12-3/4” x 7/8”
9-7/8” x 9-7/8” x 1-1/8”
12-7/8” x 12-7/8”
9” x 9” x 1-1/4”
10-1/4” x 10-1/4”
16-1/8” x 16-1/8”
19-7/8” x 19-7/8”
11-3/8” x 11-3/8”
1-7/8” x 1” x 94-1/2” 2” x 5/8” x 94-1/2” 3-1/8” x 3/4” x 94-1/2”
2” x 7/8” x 96”
2-3/8” x 3/4” x 94-1/2”
4” x 1-1/4” x 96”
90º Butt Joint Corners 90º Butt Joint Corner 90º Butt Joint Corner
90º Mitreless Corner Cover
90º Mitreless Corner Cover
90º Butt Joint Corner
Rosette
DEM-315C
DEM-315D
DEM-315F
DEM-315E
DEM-315A DEM-319A
DEM-320A
DEM-321A
DEM-331B
DEM-331A
DEM-336A
DEM-315 DEM-319 DEM-331
DEM-320
DEM-321
DEM-336
PANEL MOULDINGS / ACCESSORIES
All dimensions are approximate.
Polyurethane - DEM Mouldings 100% Recycled Polystyrene - RPS Mouldings
NEW!
Q-714
3-1/4” x 2-3/4”
6-1/8” x 6-1/8”7-3/8” x 7-3/8”
5-1/16” x 5-1/16”
3” x 3”
3-1/4” x 2-3/4”
7-3/4” x 7-3/4”
1-5/8” x 1/2” x 94-1/2”
15” x 4”
10” x 10”
11-3/8” x 11-3/8”
9” x 9”
Shown with DEM-400A
3-1/8” x 3-1/8”
2-9/16” x 13/16” x 94-1/2”
2” x 5/8” x 94-1/2”1-5/8” x 11/16” x 94-1/2” 1-1/2” x 3/4” x 94-1/2”
90º Mitreless Corner Cover90º Mitreless Corner Cover
180º Mitreless Corner Cover
90º Butt Joint Corner
90º Mitreless Corner Cover
90º Mitreless Corner Cover
90º Mitreless Corner Cover
180º Mitreless Straight Cover
180º Mitreless Straight Cover
180º Butt Joint Corner
180º Straight Butt Joint
90º Butt Joint Corner
9-1/4” x 4-3/8”
DEM-400-E
DEM-400-F
DEM-400A
DEM-400B
DEM-400
DEM-405-F
DEM-405C
DEM-410A
DEM-405D
DEM-405-E
DEM-410
DEM-405
DEM-415A
DEM-415B
DEM-419A
DEM-419
DEM-415
DEM-405B
All dimensions are approximate.
Polyurethane - DEM Mouldings 100% Recycled Polystyrene - RPS Mouldings
PANEL MOULDINGS / ACCESSORIES
NEW!
NEW!
NEW!
Q-715
1-1/2”
1-1/8”
7/16”
3/4”
94-1/2” Length
2-1/8”1-1/2”
1-1/2”
96” Length
2-1/8”1-1/2”
1-1/2”
96” Length 96” Length
96” Length 96” Length
96” Length
3/4”
3/4”
3/4”
3/8”
1”
1/2”
1/2” R1/4”
3/4”
3/4”
1/4”
1-5/8”
9/16”
96” Length
96” Length For 3/4” Board1-9/16”
1-1/4”
96” Length For 1/2” Board
96” Length
DEM-205
ANGLE MOULDINGRPS-2205
SCOTIA MOULDINGRPS-0093
QUARTER ROUNDRPS-0105
HALF ROUNDRPS-0052
HALF ROUNDRPS-0120
DOOR STOPRPS-0935
SHOE MOULDINGRPS-0127-07
FOR 1/2” BOARDRPS-0494
CAP/BACKBANDRPS-0490
CX134 Duropolymer®
Polyurethane DEM Mouldings Polystyrene RPS Mouldings
100% RECYCLED POLYSTYRENE
COMMON MOULDINGS
All dimensions are approximate.
•HigH impact• Recommended blade 10” Blade, 200 teeth
information can be found on page 686DUrOpOLyMer®&
Q-716
96” Length
5/8”
2-1/4”
3/8”
96” Length
1-1/8”
3-5/8”
11/16”
96” Length
11/16”
2-1/4”
1/8”
96” Length
1-3/8”
7-3/4”
96” Length for 3/8” Board
1”
2-5/8”
3/8”
1/2”
96” Length for 1/2” Board
1-1/4”
1-1/2”1/4”
4”
4”
1-1/4”Deep
9/16” Groove on back to accommodate moulding
Works with
RPS-0376 Moulding
11/16”
2-1/2”
3/16”96” Length
94-1/2” Length
1-1/8”
3-1/2”
96” Length for 3/8” Board
1”
1-3/4”
3/8”
96” Length Design Repeat: 1-1/2”
1-3/8”
7-3/4”
RPS-0376
RPS-0299
RPS-0327
RPS-0361
DEM-396
DEM-430
RPS-0491-07
CAP/BACKBAND RPS-0492-07
RPS-0493-07
DEM-394
DECORATIVE KEYSTONE APPLIQUE
RPS-0376-A
Polyurethane DEM Mouldings Polystyrene RPS Mouldings 100% RECYCLED POLYSTYRENE
CASE MOULDINGS
All dimensions are approximate.
NEW!
•HigH impact• Recommended blade 10” Blade, 200 teeth
RPS PRODUCT information can be found on page 686
Q-717
94-1/2” Length 10” Max Radius on Flexible
1/2”
4”
4-5/16” x 4-5/16” x 1”
7-3/8”
4-3/4” x 4-3/4” x 1”
7-3/8”
1/2”
5-5/8”
1/2”
3-1/8”
1”
4-3/8”
94-1/2” Length
9/16”
1”
7-3/8”
Inside CornerDEM-485IC
Outside CornerDEM-485OC
96” Length
96” Length
96” Length
96” Length
96” Length
96” Length
96” Length
DEM-435 DEM-435-F - Flexible
Base MouldingDEM-485
RPS-4475
RPS-0431 SX122 Duropolymer®
SX137 Duropolymer®
SX155 Duropolymer®
SX138 Duropolymer®
SX104 Duropolymer®
Polyurethane DEM Mouldings Polystyrene RPS MouldingsDuropolymer® SX Mouldings
100% RECYCLED POLYSTYRENE
BASE MOULDINGS
All dimensions are approximate.
•HigH impact• Recommended blade 10” Blade, 200 teeth
information can be found on page 686DUrOpOLyMEr®&
Q-718
18” Dia.Projection: 1-1/2”ID: 3-5/8”
15” Dia.Projection: 1-3/4”
18” Dia.
18” Dia.Projection: 1-1/2”ID: 3-5/8”
Projection: 1-1/2”ID: 3-5/8”
15-1/2” Dia.
12” Dia.Projection: 1-1/8”
16-1/2” Dia.Projection: 1-1/2”
18” Dia.Projection: 1-1/2” ID: 3-5/8”
DEM-528
Projection: 1-7/8” ID: 3-5/8”
DEM-522
DEM-525
DEM-514
DEM-510
DEM-516
DEM-519
DEM-513
18” Dia.
DEM-531
Polyurethane Architectural Elements
DECORATIVE MEDALLIONS
All dimensions are approximate.
For our complete line of CEILING DOMES,
see pgs. 798-802
Q-719
20-1/2” Dia.Projection: 1-1/2”
18” x 18”Projection: 1-5/8” ID: 3-5/8”
22-5/8” Dia.Projection: 1-3/4”
21” Dia.Projection: 1-3/8”
19” Dia.Projection: 1-5/8”
18” Dia.Projection: 1-3/8” ID: 3-5/8”
23-5/8” Dia.Projection: 3-1/2”
23-5/8” Dia.Projection: 2-3/4”
DEM-534
DEM-549
DEM-546
DEM-540 DEM-543
DEM-537
DEM-555 DEM-552
Polyurethane Architectural Elements
DECORATIVE MEDALLIONS
All dimensions are approximate.
For our complete line of CEILING DOMES,
see pgs. 798-802
Q-720
24-1/4” Dia.Projection: 2”
28-1/8” Dia.Projection: 1-7/8”
23-5/8” Dia.Projection: 2-1/8” ID: 3-5/8”
32-5/8” Dia.Projection: 2”
30” Dia.Projection: 2-3/8”
24” Dia.Projection: 3”
27-1/8” Dia.Projection: 2-1/2”
37-1/2” Dia.Projection: 3-1/2”
29-1/8” Dia.Projection: 1-1/2”
31-1/2” Dia.Projection: 1-7/8”
DEM-582
DEM-564
DEM-558
DEM-570
DEM-576
DEM-585
DEM-561
DEM-567
DEM-579
DEM-573
Polyurethane Architectural Elements
DECORATIVE MEDALLIONS
All dimensions are approximate.
For our complete line of CEILING DOMES,
see pgs. 798-802
Q-721
11” x 7” x 5/8” 8” x 6” x 3/4”8-5/8” x 6-1/4” x 5/8” 10-5/8” x 7” x 5/8”
Note* All brackets shown are “Right” brackets
Approximate adhesive yields*Mouldings 2” + Under – 60’Mouldings 2 - 5” – 45’Mouldings 5” + Over – 30’
Long Side: 17”Short Side: 12”Projection: 1-5/8”
DEM-590
Long Side: 18-1/2”Short Side: 13-1/2”Projection: 2”
DEM-592
Long Side: 23-3/4”Short Side: 12-1/4”Projection: 1-3/4”
DEM-594
Long Side: 30-1/2”Short Side: 20”Projection: 1-1/2
DEM-596
Long Side: 36”Short Side: 26”Projection: 1-5/8”
DEM-598
*Yields are approximate and based on average conditions and installation technique.
ADH1 10.6 oz tubePL Premium Adhesive
DEM-678R DEM-678L
DEM-684R DEM-684L
DEM-675R DEM-675L
DEM-681R DEM-681L
Polyurethane Architectural Elements
DECORATIVE MEDALLIONS
All dimensions are approximate.
STAIR BRACKETS
NEW!
For our complete line of CEILING DOMES,
see pgs. 798-802
For a complete line see pages 798-802
Domes
Elliptical
Surface Mount
Recessed
LightCove
Q-722
Q-723
DEM-810 Series
Ca
sin
gs
Plin
ths
DEM-820 Series
Ro
sEtt
Es
DX119 & D200
DX121 & D210
DEM-810a3-1/2” H x 3-1/2” W
3/4” Projection
DEM-81094-1/2” L x 3-1/4” W
3/4” Projection
DEM-810C 9-1/8” H x 4-1/8” W
1-1/8” Projection
DEM-820a4-3/4” H x 4-3/4” W
3/4” Projection
DEM-82096” L x 4-1/2” W 3/4” Projection
DEM-820C 7-3/4” H x 4-3/4” W
1” Projection
D2003-1/4” H x 3-1/4” W 1-3/16” Projection
D2103-1/4” H x 3-1/4” W
1-3/8” Projection
DX11996” L x 3-11/16” W
7/8” Projection
D310 9-13/16” H X 3-3/4” W
1-3-16” Projection
DX12196” L x 3-3/4” W15/16” Projection
Polyurethane DEM & Duropolymer® DX architectural Elements
DOOR/WINDOW CASINGS
All dimensions are approximate.
Q-724
DEM-705 SeriesDEM-705 Series Pilaster Capitals To Choose From:
DEM-705 78-3/4” L x 5-3/4” W
5/8” Projection
DEM-705A 6-1/8” H x 10-1/2” W
3” Projection
DEM-705C 7-3/8” H x 8-1/4” W 2-1/4” Projection
DEM-705B 3” H x 9-3/8” W
2-1/4” Projection
CA
PITA
LS
PILA
STER
PLIn
Th
DEM-705F 12-1/8” H x 6-5/8” W
1” Projection
Polyurethane Architectural Elements
PILASTERS
All dimensions are approximate.
Q-725
1-1/8”12
-1/2
”1-1/2”
17-3
/4”
1-1/8”
9-7/
8”
DEM-710A 7-1/8” H x 17-1/2” W
2-5/8” Projection
PLIn
ThS
CA
PITA
LS
PILA
STER
S
DEM-715 Series DEM-720 SeriesDEM-710 Series DEM-720A
25-1/4” H x 25-3/8” W 8-1/4” Projection
DEM-720 94-1/2” L x 17-3/4” W
1-1/2” Projection
DEM-720B31-5/8” H x 23-5/8” W
5-1/2” Projection
DEM-715A 17” H x 21-5/8” W 7-1/2” Projection
DEM-715 78-3/4” L x 12-1/2” W
1-1/8” Projection
DEM-715B20-7/8” H x 15” W 2-1/8” Projection
DEM-710B 6-1/4” H x 13-1/8” W
2-3/4” Projection
DEM-710 78-3/4” L x 9-7/8” W
1-1/8” Projection
MASSIVE PILASTERS
All dimensions are approximate.
Polyurethane Architectural Elements
Q-726
96” Length
1-3/8”
7-3/4”
96” Length Design Repeat: 1-1/2”
1-3/8”
7-3/4”
The examples shown can be applied to most
entryways. Door opening configurations may vary.
Please measure your specific opening or
application.
1-3/16” PROJECTION
86-5/8”
6-7/8”
AD
JUSTA
BLE
17-3/4”
6-1/4”
8-5/8”1”
2-3/8”
CAPITAL & MOULDING ASSEMBLY
31-1/2”
7-3/4”
1-3/4” PROJECTION
21”
7-3/4”
1-3/4” PROJECTIONFIELD SANDING REqUIRED TO USE ACCESSORIES
wITh PANEL MOULDINGS
DEM-780-LDEM-396
DEM
-780-R
DEM-394DEM-740
DEM-783-L
DEM-733
DEM
-783-R
DEM-745DEM-785-L DEM-785-R
8-1/4”
10-1/16”
8-1/4”
9-3/4”
8-1/4”
9-1/16”
DEM-394 Must be purchased in full length pieces
DEM-396 Must be purchased in full length pieces
DEM-785-L (Left)DEM-785-R (Right)
DEM-745
DEM-740
DEM-783-L (Left)DEM-783-R (Right)
DEM-780-L (Left)DEM-780-R (Right)
DEM-733
• For Interior & Exterior Applications. • Will not split, decay, warp or rot. • Primed and ready to paint.(When using as an exterior application, we recommend using a “UV” stabilized paint).
Polyurethane Architectural ElementsDOOR SURROUNDS & ACCESSORIES
All dimensions are approximate.
Q-727
Can expand up to
approximately 11’ using:
two DEM-755 + one DEM-765
FIELD SANDING REqUIRED TO USE ACCESSORIES wITh
PANEL MOULDINGS
DEM-755DEM-765
DEM-735
C
A
B
DEM-760 DEM-765
DEM-735
DEM-730
90-1/2”
AD
JUSTA
BLE
14-1/2”
7”6-1/2”
85”
AD
JUSTA
BLE
8-5/8”
PILASTERS6” & 9” CROSShEADSC
D
B
A
DEM-750 DEM-755
PART # A B C DDEM-750 59-15/16” 63-3/4” 3” 6-1/8”DEM-755 67-3/4” 72-5/8” 4” 9”
CROSShEADS ________________
PART # A B CWORKS WITH CROSSHEAD
DEM-760 7-1/16” 5-3/4” 3-15/16” DEM-750DEM-765 11-7/16” 8-1/4” 6” DEM-755
KEYSTONES _______________________
PART # DESCRIPTION HEIGHT WIDTH PROJ.PLINTH HEIGHT
DEM-730 Fluted Pilaster 85” 6-1/2” 2-3/4” 8-5/8”DEM-735 Raised Panel Pilaster 90-1/2” 7” 2-1/8” 14-1/2”
PILASTERS w/attached cap & adjustable plinth _____
• For Interior & Exterior Applications. • Will not split, decay, warp or rot. Primed and ready to paint.(When using as an exterior application, we recommend using a “UV” stabilized paint).
High Density Polyurethane Architectural Elements
DOOR SURROUNDS & ACCESSORIES
All dimensions are approximate.
Q-728
G
H
37-1/2” W x 69” H
16-3/4” W x 27-1/2” H
Please refrain from cutting the hole for your niche until you have actual niche for exact measurements.
PART # A B C D E F G H IDEM-602 15-1/4” 5-3/8” 23-3/8” 11-3/16” 3-1/2” 22-3/4” 16-3/4” 3-7/8” 3-1/2”DEM-605 23-1/2” 8” 43-1/4” 18” 6-1/8” 39” 26-3/8” 8” 9-1/4”DEM-608 23-1/2” 8” 43-1/4” 18” 6-1/8” 39” 28” 4” 6-1/4”DEM-611 35-1/4” 12” 63-5/8” 27-5/8” 11” 58” 37-1/2” 3-3/4” 5-3/8”
DEM-611 shown
Niche shown with center decorative trim.
traNslucENt shElf for uPlightiNg
(accent pieces included w/Niche)
* the 3 accent pieces shown above can be placed on
the face of the frame of your choosing, allowing you to
create your own unique look.
A
C F
ED
B
Niche shown without
included decorative adjustable
trim pieces.
I
23-1/2” W x 34” H
PART # A B C D E F G H IDEM-635 21-1/8” 19-1/4” 13-3/4” 28-5/8” 34” 2-1/2” 5-7/8” 4-3/8” 23-1/2”
• No construction necessary.• As simple as hanging a picture.• Easily installed without having to cut a hole.• Pre-attached keyhole hangers.
Surface Mounted Niche Dimension Chart
No cutting! if You can hang a Picture, You can hang a Niche!
27-1/2” W x 48” H26-1/2” W x 52” H
* DEM-611
DEM-602 DEM-608 DEM-605
DEM-635
Polyurethane Architectural Elements
RECESSED NICHES
all dimensions are approximate.
SURFACE MOUNTED NICHE
Q-729
Flexible Mouldings
Cornice Mouldings
All the decorative elements in the ORAC DECOR Collection are produced in high density polyurethane, primed white. This material is extremely durable and easy to work with. It is tough, dimensionally stable, lightweight and easy to install using common woodworking tools and the Orac Decor adhesives. Adding elements from the ORAC DECOR Collection will enhance any new construction, renovation or redecoration project making a distinctiveimpression. The ORAC DECOR Collection offers a full range of decorative productsreproduced from popular classic to contemporary designs.
Interior Mouldings & MillworkAdd A Distinctive & Classical Touch To Any Installation
Ceiling Medallions
Wall Decorations
?Did You Know...
Raised Panels
Panel Mouldings
!
Domes
Pediments
Wall Light Fixtures Library System
ColumnsPilasters
NichesWall Surrounds
!
Corbels
Q-730
WARRANTY: All products are guaranteed to be free from manufacturing defects for 1 year from date of purchase when properly installed. If defects are present, warranty is limited to the replacement of defective material only. Orac Decor/our company is not liable for any other costs incurred.
Q-731
1-3/16”
1-11/16”
1-3/16”
2-1/2”
1-3/4” 1-3/4”
1-9/16”
2”
2-9/16”
Use Bristol as a buildup moulding with C200, C211, C212, C213, C302, C303, C304, C321
C305
C213
C305
C211C305
C303
C305
C321
C305
C212
C305
C304
9/16”
9/16”7/8”
2-1/4”
1-15/16”
1-5/8”
2-3/16”
3-3/8”
2-9/16”
2”
4-7/16”
3-15/16”
1-9/16”
2”
2-9/16”
6-1/8”
2-3/16”
1-3/8”
1-3/4”
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
Installations are guaranteed only when Orac Decor adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation.
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).**Flexible Mouldings Have
Limitations To Radius That Can Be Performed, See Page 741 For Important Information Regarding
Flexible Applications.
Most of our cornice mouldings can be obtained in flexible
material (see page 741).
Product Notes:
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog. Certain elements within the Orac Decor Polyurethane line are now being produced from DUROPOLYMER. These changes are noted where they pertain.
Ask For our FREE Orac color catalog.Individual Free Samples Available.
#A910
BristolC305 (rigid)
WindsorC230 (rigid)FC230 (flexible**)
Small TraditionalC215 (rigid) FC215 (flexible**)
FederalC322 (rigid) FC322 (flexible**)
Art NouveauC260 (rigid) FC260 (flexible**)
Small ContemporaryC602 (rigid) FC602 (flexible**)
AmericanC200 (rigid) FC200 (flexible**)
CamdenC321 (rigid) FC321 (flexible**)
HampshireC250 (rigid) FC250 (flexible**)
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Plain CorniCe Mouldings
Q-732
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
3-1/8”
4-1/2”
3-1/8”
3-1/8”
4-1/2”
3-1/8”
3-15/16”
4-5/8”
2-3/8”
4-1/2”
5-7/16”
2-15/16”
5-5/16”
5-13/16”2-3/8”
6-5/16”
7-3/8”
4-1/8”
4-1/2”
6-11/16”
4-15/16”
5-5/16”
8-9/16”
6-11/16”
7-11/16”
9-11/16”
5-7
/8”
4-1/2”
10-1/8”
9-1/16”
Installations are guaranteed only when Orac Decor adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation.
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).**Flexible Mouldings Have
Limitations To Radius That Can Be Performed, See Page 741 For Important Information Regarding
Flexible Applications.
Most of our cornice mouldings can be obtained in flexible
material (see page 741).
Product Notes:
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog. Certain elements within the Orac Decor Polyurethane line are now being produced from DUROPOLYMER. These changes are noted where they pertain.
Ask For our FREE Orac color catalog.Individual Free Samples Available.
#A910
Medium TraditionalC213 (rigid) FC213 (flexible**)
Small CoveC240 (rigid) FC240 (flexible**)
Sante FeC400 (rigid) Wellington
C220 (rigid) FC220 (flexible**)
WestonC331 (rigid) FC331 (flexible**) Monticello
C333 (rigid)
FC333 (flexible**)
Large TraditionalC217 (rigid) FC217 (flexible**) Large Contemporary
C300 (rigid)
FairfaxC334 (rigid)
FC334 (flexible**)
AvalonC332 (rigid)
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Plain CorniCe Mouldings
Q-733
4-1/2”5-11/16”
1-3/16”6-11/16”
3-15/16”6-11/16”12-3/16”
8-13/16”
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
3-15/16”
3-15/16”
3-1/4”
2”
5-1/2”
3-3/8”4-15/16”
1-3/16”
6-11/16” 3-1/8”5-7/8”
11-7/16”
7-11/16”
FOR InDIRECT LIgHTIng
*C990 can be used as a combination item with P9900 & P9901 (see pages 736)
6-5/16”
8-1/2”
10-1/2”
10-1/4”
10-5/8”
14-3/4”
7-7/8”
8-1/2”
11-1/2”
C902 SHOWN
Installations are guaranteed only when Orac Decor adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation.
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).**Flexible Mouldings Have
Limitations To Radius That Can Be Performed, See Page 741 For Important Information Regarding
Flexible Applications.
Most of our cornice mouldings can be obtained in flexible
material (see page 741).
Product Notes:
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog. Certain elements within the Orac Decor Polyurethane line are now being produced from DUROPOLYMER. These changes are noted where they pertain.
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
Ask For our FREE Orac color catalog.Individual Free Samples Available.
#A910
Winston (for indirect lighting)C900 (rigid)
Regency ( for indirect lighting)C902 (rigid) FC902 (flexible**)
Richmond (for indirect lighting)C901 (rigid) FC901 (flexible**)
*HamiltonC990 (rigid)
CarlisleC335 (rigid)
WilkshireC336 (rigid)
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Plain CorniCe Mouldings
Q-734
1-3/16”
2-13/16”
2-9/16”Design Repeat: 2-1/2”
1-9/16”
3-3/8”
2-15/16” Design Repeat: 1-7/8”2”
4-15/16”
4-1/2”
Design Repeat: 31-1/2”
2-3/4”
5-1/2”
4-3/4”
Design Repeat: 7/8”3-15/16”
5-9/16”
3-15/16”
Design Repeat: 2-1/8”
3-1/8”
5-7/8”
4-15/16”
Design Repeat: 1-1/2”
2-9/16”
5-1/2”
6-1/16”
Design Repeat: 6-1/4” 4-3/8”
6-1/4”
4-1/2”
Design Repeat: 1-7/16”5-15/16”
7”
4-1/2”
Design Repeat: 2”
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).**Flexible Mouldings Have
Limitations To Radius That Can Be Performed, See Page 741 For Important Information Regarding
Flexible Applications.
Most of our cornice mouldings can be obtained in flexible
material (see page 741).Product Notes:
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog. Certain elements within the Orac Decor Polyurethane line are now being produced from DUROPOLYMER. These changes are noted where they pertain.
Installations are guaranteed only when Orac Decor adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation.
Ask For our FREE Orac color catalog.Individual Free Samples Available.
#A910
Small ClassicC214 (rigid) FC214 (flexible**) Small Queen Anne
C212 (rigid) FC212 (flexible**)
Old EnglishC201 (rigid) FC201 (flexible**) Sheraton
C304 (rigid) FC304 (flexible**)
ThatchC402 (rigid) FC402 (flexible**)
Egg & DartC302 (rigid) FC302 (flexible**)
DelftC303 (rigid) FC303 (flexible**)
Small ChippendaleC211 (rigid) FC211 (flexible**)
Large Queen AnneC216 (rigid) FC216 (flexible**)
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
deCorative CorniCe Mouldings
Q-735
5-1/8”
7-13/16”
5-7/8”
Design Repeat: 10-1/8”
4-15/16”
8-5/8”
7-1/16”
Design Repeat: 4”5-1/2”
8-11/16”
6-11/16”Design Repeat: 3-7/8”
2-3/8”
9-13/16”
10-1/8”
Design Repeat: 13-7/16”7-11/16”
6-11/16”
10-3/16”
Design Repeat: 1-15/16”
Design Repeat: 1-1/2”
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
For Product Information see page 737.
C307 with C-307A
7-1/2”
10-5/8”
7-1/2”
C307C307A
HepplewhiteC218 (rigid) FC218 (flexible**)
Large ClassicC219 (rigid)
Harbor BayC301 (rigid) FC301 (flexible**) Festoon
C308 (rigid) FC308 (flexible**)
Large ChippendaleC422 (rigid)
Georgetown w/CorbelsC307 (rigid) C-307A*(Corbel)
“Europe’s # 1 Choice for Interior Design”
*DUROPOLYMER®POLYURETHANE
deCorative CorniCe Mouldings
Q-736
Design Repeat: none
Design Repeat: none
Design Repeat: none
Design Repeat: none
Design Repeat: none
P-5020B3-9/16”x3-9/16”x1/2”
Design Repeat: none
Design Repeat: none
Design Repeat: none
Design Repeat: none
P-5020A3-9/16”x3-9/16”x1/2”
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
Design Repeat: none
Design Repeat: none
9/16”
2-3/4”
3/8”
3-1/8”
1-3/16”
4-3/4”
Installations are guaranteed only when Orac Decor adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation.
Product Notes:
YorkshireP8050 (rigid) FP8050 (flexible**)
SuttonP9050 (rigid)FP9050 (flexible**) Small Weave
P5021 (rigid)FP5021 (flexible**)
EssexP9040 (rigid)FP9040 (flexible**) Providence
P9901 (rigid)FP9901 (flexible**)
WeaveP5020 (rigid)FP5020 (flexible**)
P-5020A P-5020B
ChathamP9020 (rigid)FP9020 (flexible**)
HamptonP9010 (rigid) FP9010 (flexible**)
ChesterfieldP8040 (rigid) FP8040 (flexible**)
ContemporaryP7070 (rigid)FP7070 (flexible**) Brunswick
P9900 (rigid)FP9900 (flexible**)
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Panel Mouldings / aCCessories
Q-737
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
Installations are guaranteed only when Orac Decor adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation.Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.Certain elements within the Orac Decor Polyurethane line are now being produced from DUROPOLYMER. These changes are noted where they pertain.
**Flexible Mouldings Have Limitations To Radius That Can Be Performed, See Page 741 For Important Information Regarding
Flexible Applications.
Most of our cornice mouldings
can be obtained in flexible material
(see page 741).
Product Notes:
Use ORAC FIX Extra and ORAC DecoFix Pro
for perfect installation (see page 758).
ClassicP3020 (rigid)FP3020 (flexible**)
Design Repeat: 3-1/8”
SheratonP7040 (rigid)FP7040 (flexible**)
Design Repeat: 7/8”
EllingtonP7080 (rigid)
Design Repeat: 15-3/4”
ChippendaleP6020 (rigid)FP6020 (flexible**)
Design Repeat: 3/4"
Greek KeyP7060 (rigid)FP7060 (flexible**)
Design Repeat: 2-1/2”
Harbor BayP7050 (rigid)FP7050 (flexible**)
Design Repeat: 3-1/8”
Queen AnneP7030 (rigid)FP7030 (flexible**)Design Repeat: 1-1/2”
Victorian BraidP7010 (rigid)FP7010 (flexible**)Design Repeat: 9-13/16”
DelftP7020 (rigid)FP7020 (flexible**)Design Repeat: 6-1/4"
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Panel Mouldings / aCCessories
P-801C
P8020
Endless Possibilities
E urope’s # 1 Choice for interior design
Q-738
Q-739
*P-8030C7-1/2"x3-9/16"x9/16"
*P8030D5-1/8"x5-1/8"x9/16"
All Curves have an Inside Radius approximately 5"
*P-801C7-7/8"x4-3/8"x1"
All Curves have an Inside Radius approximately 5"
All Curves have anInside Radius approximately 5"
*P-4020A6-9/16" x2" x 1-3/16"
P-202-9/16"Dx1/2"
P-101A9-13/16"x 9-13/16"x1"
P-212-9/16"x2-9/16"x1/2"
P2020P-201AP-21
P1020, P8030
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
P-201A9-13/16"x 9-13/16"x1"
Small AmericannaP8030 (rigid)FP8030 (flexible**)Design Repeat: none
P-8030CP-8030D
Large AmericannaP8020 (rigid) FP8020 (flexible**) Design Repeat: none
P-801C
WellingtonP4020 (rigid)FP4020 (flexible**)Design Repeat: none
P-4020A
VictorianP1020 (rigid) FP1020 (flexible**) Design Repeat: 2-3/8"
P-20P-101A
American ColonialP2020 (rigid)
FP2020 (flexible**)
Design Repeat: 3-1/2"
P-21P-201A
“Europe’s # 1 Choice for Interior Design”
*DUROPOLYMER®POLYURETHANE
Panel Mouldings / aCCessories
Q-740
Note: Please refrain from cutting the hole for your niche until you have the actual niche for exact measurements.All 400 & 500 series niches come with a translucent shelf for uplighting -(LIGHT &HARDWARE NOT INCLUDED).
N404N410
=+
N404, N410
Note: MeasureMeNts are approxiMate.
N504 N510
=+
N504, N510
=+N503
N520N503,N510
?Did You Know...PART # A B C D EN404 16-9/16" 29-15/16" 4-3/8" 21-5/8" 9-5/8"N503 27-3/8" 44-11/16" 4-3/8" 37-3/16" 20-1/4"N504 27-3/8" 44-7/8" 4-3/8" 37-3/16" 19-1/2"
PART # F G H I JN410 12-3/8" 23-5/8" 3-3/8" 23-1/16" 11"N510 22-1/16" 38-3/4" 7-1/16" 37-13/16" 20-7/8"N520 22-1/16" 38-9/16" 7-1/16" 36-1/4" 20-7/8"
Ask For our FREE Orac color catalog.
individual Free samples available.
#A910
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Niches
FC & FP Series = Available in Straight 6’6” LengthsSX Series = Available in Straight 8’ Lengths
Our “Bend To Fit”, straight flex is stocked in 6’6” lengths ready for immediate shipping. This lightweight polymer is capable of moderate radii (see chart below) to suit most applications.
NOTE: Flexible mouldings may vary slightly in size (more on larger profiles) compared to
rigid straight mouldings.
NOT RECOMMENDED FOR INDIRECT LIGHTING APPLICATIONS
Inside Radius
Outside Radius
Arch Radius
PART #PROFILE
“BEND TO FIT”MIN.
INSIDERADIUS
MIN.OUTSIDERADIUS
MIN.ARCH
RADIUSFLEXIBLE CORNICE MOULDINGS
FC200 5’ 5’ N/AFC201 4’6” 4’6” N/AFC211 10’6” 10’6” N/AFC212 4’6” 4’6” N/AFC213 7’6” 7’6” N/AFC214 3’6” 3’6” N/AFC215 5’6” 5’6” N/AFC216 11’ 11’ N/AFC217 11’ 11’ N/AFC218 12’ 12’ N/AFC220 9’6” 9’6” N/AFC230 3’6” 3’6” N/AFC240 7’6” 7’6” N/AFC250 3’6” 3’6” N/AFC260 5’ 5’ N/AFC301 9’6” 9’6” N/AFC302 6’6” 6’6” N/AFC303 6’ 6’ N/AFC304 5’6” 5’6” N/AFC305 9’6” 9’6” 3’FC308 4’6” 4’6” N/AFC321 4’6” 4’6” N/AFC322 4’ 4” N/AFC331 15’ 15’ 6’FC333 12’ 12’ N/AFC334 13’6” 13’6” N/AFC360 9’6” 9’6” N/AFC400 10’6” 10’6” N/AFC402 6’ 6’ N/AFC602 4’6” 4’6” 6’FC901 12’ 12’ N/AFC902 13’ 13’ N/A
PART #PROFILE
“BEND TO FIT”MIN.
INSIDERADIUS
MIN.OUTSIDERADIUS
MIN.ARCH
RADIUSFLEXIBLE PANEL MOULDINGS
FP1020 1’ 1’ 2’6”FP2020 1’ 1’ 2’6”FP3020 3’ 3” 6’FP4020 3’ 3’ 3’FP5020 1’6” 1’6” 9’FP5021 1’ 1’ 2’6”FP6020 1’6” 1’6” 5’FP7010 1’ 1’ 10’FP7020 1’ 1’ 9’6”FP7030 1’ 1’ 5’FP7040 1’6” 1’6” 6’FP7050 1’6” 1’6” 5’FP7060 5” 5” 6’FP7070 1’6” 1’6” 9’FP7080 1’6” 1’6” N/AFP8020 1’6” 1’6” 4’6”FP8030 1’ 1’ 2’FP8040 1’ 1’ 9’6”FP8050 1’ 1’ 9’FP8060 1’ 1’ 10’FP9010 1’6” 1’6” 8’6”FP9020 1’6” 1’6” 9’FP9040 1’6” 1’6” 3’FP9050 1’ 1’ 2’6”FP9900 1’6” 1’6” 6’FP9910 1’6” 1’6” 6’
FLEXIBLE BASE MOULDINGSSX105F 1’6” 1’6” N/ASX118F 1’6” 1’6” N/ASX155F 1’6” 1’6” N/A
?Did You Know... #A910 Ask For our FREE Orac color catalog. Individual FREE Samples Available.
Q-741
Above radii are the tightest curves capable without deformation of profile and excessive stress on mounting surfaces. Our company assumes no responsibility for material when recommended radii is exceeded. It is best to paint mouldings after installation. See flexible installation page for proper installation procedures.
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Flexible Mouldings
Q-742
D3103¾"W x9-13/16"Hx 1-3/16"D
P90206'6"H
D2103¾"Wx 3¾"Hx 1-3/8"D
K201 5-7/8"H
K20221-1/4"H
K200 6'6"H K250
6'6"H
K25114"H
K2535-5/16” H
(Use with the K250 & K254)
D120,K201,K200
K254 20-7/8" H
7-5/16"
6-5/16"
1-9/16"
3-1/2"
Note: MeasureMeNts are approxiMate.
?Did You Know...Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).
11-13/16"
2-3/4"
15-3/8"
#A910 Ask For our FREE Orac color catalog. individual Free samples available.
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Pilasters
Q-743
K25420-7/8” H
K2406’6” H
K2417-1/16” H
K25521-1/4” H
K2206’6” H
K2218-11/16” H K223
8-7/8” H
( Use with the K220 & K255)
K2246-11/16” H
( Use with the K220 & K255)
K221,K220
K223,K220
11-13/16"2-3/4"
8-11/16"
1-9/16"
10-1/4"15-3/8"
Note: MeasureMeNts are approxiMate.
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
?Did You Know...Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).
#A910 Ask For our FREE Orac color catalog. individual Free samples available.
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Pilasters
Q-744
K1001,K1151
K1001,K1151
* K1141 4-15/16"H * K1111
11-5/8"H* K1121
11-13/16"H
* K1151 4-3/4"H
K113122-7/16"H
K10016'6"H
K11016'6"H
K11
51K
1001
K11
21
K115
1K1
001
K11
11
K11
51K
1001
K11
41
K115
1K1
101
K11
21
K115
1K
1101
K11
11
K115
1K
1101
K11
41
Mix & Match!
K1121,K1101
?Did You Know...
Note: MeasureMeNts are approxiMate.
#A910
Ask For our FREE Orac color catalog. individual Free samples available.
DO NOT CUT COLUMNS. All height adjustments are to be
made by cutting plinth base.
*DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Contemporary Half Columns
Q-745
K1102,K1152
*K31114-15/16"H
K21317-7/8"H
*K51417-5/8"H
K315122-5/8"H
K31016'6"H
Mix & Match!
K21
31
K31
01
K51
41
K21
31
K32
01
K51
41
K32017’10-1/2"H
11-13/16”
5-7/8”
8-7/16”
10-5/8”
Can achieve overall height of approximately 10’-3-1/4” if used with K3151 & K5141
?Did You Know...
Note: MeasureMeNts are approxiMate.K
2131
K
3001
K
3111
K21
31
K31
01
K31
1
K21
31
K30
01
K
5141
K21
31
K32
01
K31
11K30016'6"H
#A910
Ask For our FREE Orac color catalog. individual Free samples available.
DO NOT CUT COLUMNS. All height adjustments are to be
made by cutting plinth base.
*DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
ClassiCal Half Columns
Q-746
K1142,K1102
K1122
* K1152 4-3/4"H
K11026'6"H
K10026'6"H
* K1112 11-13/16"H
* K1122 11-5/8"H
* K1142 4-15/16"H
Mix & Match!K
1152
K10
02
K11
52K
1002
K11
22
K11
12
K11
52K
1002
K11
42
K11
52K
1102
K11
22
K11
52K
1102
K11
12
K11
52K
1102
K11
42
?Did You Know...
Note: MeasureMeNts are approxiMate.
K113222-7/16"H
#A910
Ask For our FREE Orac color catalog. individual Free samples available.
DO NOT CUT COLUMNS. All height adjustments are to be
made by cutting plinth base.
*DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Contemporary WHole Columns
Q-747
Mix & Match!
K1102,K1152
K1122,K1002,K1152
K21327-7/8"H
K30026'6"H
* K3112 4-15/16"H
K31026'6"H
* K5142 7-5/8"H
K21
32
K32
02
K31
12
K32027'10-1/2"H
11-13/16”
10-5/8”
Can achieve overall height of approximately 10’-3-1/4” if used with K5142 & K3152
?Did You Know...
Note: MeasureMeNts are approxiMate.K
2132
K
3002
K
3112
K21
32
K30
02
K51
42
K21
32
K31
02
K31
12
K21
32
K31
02
K51
42
K21
32
K32
02
K51
42
#A910
Ask For our FREE Orac color catalog. individual Free samples available.
DO NOT CUT COLUMNS. All height adjustments are to be
made by cutting plinth base.
K315222-5/8"H
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
ClassiCal WHole Columns
E urope’s # 1 Choice for Interior Design
Q-748
Q-749
Shown: M9010L, M9010A, M9010R, M9010B & P9010
Shown: M9010L, M9010B, M9010R & P9010
Shown: M9010L, M9010A, M9010R& P9010
Shown: M9010A, M9010L, M9010R, M9010C & P9010
Note: MeasureMeNts are approxiMate
5-7/8”
9-7/8”
5-3/8”
5-3/8”
3/4”
1”5-3/8”
6’6”
K200
K201L/R
D320
K200
?Did You Know... #A910 Ask For our FREE Orac color catalog. individual Free samples available.
D3003-3/4”W x10-1/4”H x 1-9/16”D
* M9010L 25-3/8”W x 12-1/2”H x
1-3/16”D * M9010R 25-3/8”W x 12-1/2”H x
1-3/16”D
* M9010A 3-5/16”W x 4-1/2”H x 1-3/4”D
M9010B4-15/16”W x1-15/16”H x 1-15/16”D M9010C
8-7/8”W x1-15/16”H x 1-15/16”DP9010
3-9/16”W x6’6”H x 1-3/16”D
K201L/R
D320
*DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
LIBRARY FACADE SYSTEM
DECoRATIvE DooR SuRRounDS
Q-750
R-1413-3/16" DIA.
R-1311-1/4" DIA.
R-0710-1/4" DIA.
R-105-7/8" DIA.
R-117-1/4" DIA.
R-127-11/16" DIA.
R-358-5/8" DIA.
Our medallions are specially designed with a solid core for ornamental plaque use. However, all medallions can be cut with a hole cutter or keyhole saw to accommodate lighting or ceiling fans.
R-5012-5/8" DIA. R-08
14-15/16" DIA.
R-12
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
?Did You Know...Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).
SEE PAGE 803FOR OUR
CHANDELIER LIGHT LIFT
NOTE: MEASUREMENTS ARE APPROxIMATE.
R-6115-3/4" DIA.
R-3115-3/16" DIA.
Ask For our FREE Orac color catalog. Individual FREE Samples Available. #A910
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Ceiling Medallions
Q-751
Our medallions are specially designed with a solid core for ornamental plaque use. However, all medallions can be cut with a hole cutter or keyhole saw to accommodate lighting or ceiling fans.
R-0919-1/8" DIA.
R-2231-1/8" x 20-1/4"
R-1819-1/8" DIA.
R-4620-7/8" DIA.
SEE PAGE 803FOR OUR
CHANDELIER LIGHT LIFT
R-18
NOTE: MEASUREMENTS ARE APPROxIMATE.
R-1718-5/16" DIA.
R-1617-11/16" DIA.
R-5116-9/16" DIA.
?Did You Know...Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).
Ask For our FREE Orac color catalog. Individual FREE Samples Available. #A910
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Ceiling Medallions
Q-752
Our medallions are specially designed with a solid core for ornamental plaque use. However, all medallions can be cut with a hole cutter or keyhole saw to accommodate lighting or ceiling fans.
R-6621-7/16"O.D16-15/16"I.D.
R-7624-3/8” DIA.
R-7425-7/8" DIA.
R-2826-15/16" DIA.
R-7724-3/8” DIA.
R-40
NOTE: MEASUREMENTS ARE APPROxIMATE.
R-5227-1/2" DIA.
R-2328-1/8" DIA.
R-7327-5/8" DIA.
?Did You Know...Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).
SEE PAGE 803FOR OUR
CHANDELIER LIGHT LIFT
RIMONLY
Ask For our FREE Orac color catalog. Individual FREE Samples Available. #A910
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Ceiling Medallions
Q-753
Our medallions are specially designed with a solid core for ornamental plaque use. However, all medallions can be cut with a hole cutter or keyhole saw to accommodate lighting or ceiling fans.
R-2430-7/8" DIA.
R-6437-3/8" DIA.
R-38
R-3828-1/8" DIA.
R-4029-1/8" DIA.
R-2729-1/2" DIA.
?Did You Know...Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).
SEE PAGE 803FOR OUR
CHANDELIER LIGHT LIFT
Ask For our FREE Orac color catalog. Individual FREE Samples Available. #A910
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
NOTE: MEASUREMENTS ARE APPROxIMATE.
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Ceiling Medallions
Q-754
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
* G40 6-11/16" W x 5½" H x 5/8" D - 3/4" at neck
* G42 16-1/8" W x 2" H x 5/8" D
G5021¼" W x15-3/8" H x1-3/16" D G51
28¾" W x 9-7/16" H x 1-3/16" D
D120
D140
D150
D161
D170
B-41735-5/8" W x 4-15/16" Hx 5-1/2" D
AB
DC
D161
?Did You Know...
Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).
#A910 Ask For our FREE Orac color catalog.
Individual FREE Samples Available.
PART # A B C DD120 48-5/8" 9-13/16" 3-3/8" 43-1/2"D140 39-3/8" 12-3/8" 3/4" -D150 39-9/16" 6-1/8" 9-16" -D161 36-1/4" 8-7/16" 1-9/16" -D170 41-5/16" 9-7/8" 1-3/8" -
“Europe’s # 1 Choice for Interior Design”
WALL DECORATIONS & SHELVES
*DUROPOLYMER®POLYURETHANE
NotE: MEASuREMENtS ARE AppRoxIMAtE.
PEDIMENTS
Q-755
D101
D102
D62
D1010
P9010
*D300
P9020
Single Door SurrounDSoPening: Minimum 26¾" Wide Maximum 41-5/16" Wide
Double Door SurrounDSoPening: Minimum 53-1/8" Wide Maximum 73-5/8" Wide
AcceSSorieS ForSingle & Double Door SurrounDS
D102, D62,D1010, P9010, D300
*D210
*D200
*D310
*D1014
D400
D401
D402
D401D402
2-3/4"
4-3/4"
5-3/4"
?Did You Know...
PArT # W H DD101 49-13/16" 7-11/16" 1-3/16"P9010 3-3/4" 6'6" 1-3/16"P9020 3-3/4" 6'6" 3/4"D300 3-3/4" 10-1/4" 1-9/16"D310 3-3/4" 9-13/16" 1-3/16"D400 50-3/16" 5-11/16" 2-3/16"D401 50-3/16" 5-11/16" 2-3/16"D402 4-3/4" 5-3/4 2-3/16"
PArT # W H DD102 82-1/2" 9-1/4" 1-3/16"P9010 3-9/16" 6'6" 1-3/16"P9020 3-3/4" 6'6" 3/4"D300 3-3/4" 10-1/4" 1-9/16"D310 3-3/4" 9-13/16" 1-3/16"
PArT # W H DD200 3-3/4" 3-3/4" 1-3/16"D210 3-3/4" 3-3/4" 1-3/8"D62 6-1/8" 4-9/16" 9/16"
D1010 12-3/16" 4-3/8" 1/4"D1014 13" 5-5/16" 9/16"
“Europe’s # 1 Choice for Interior Design”
DOOR SURROUNDS
*DuroPolYMer®POLYURETHANE
Note: MeasureMeNts are approxiMate.
Q-756
*D50321-5/8"x21-5/8"
*D5048-5/8"x21-5/8"
*D50029-1/2"H x 21-5/8"W
*D50616-15/16”x16-15/16”x5/8”
*D50721-5/8” W x 35-5/8”H x 5/8” proj
D503 & D504
This range consists of different panels and a plinth that can be combined to give ordinary doors and walls that classical look of raised panels
D503
?Did You Know...Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page 758).
H100 H101
3 pc.set
3 pc.set
NOT FOR USE WITH OPEN FLAMEFIREPLACES!
(for functional fire surrounds,see pages 806-808, 810-813)
MAXIMUM 2 KILOWATTS
ONELECTRIC
FIREPLACES
Note: MeasureMeNts are approxiMate.
#A910 Ask For our FREE Orac color catalog. individual Free samples available.
PART # A B C D E F G H IH100 51" 8-1/16" 12-3/16" 34-7/16" 7-7/8" 6-7/8" 34-5/8" 33-1/16" 45-1/16"H101 50-3/4" 7-7/8" 9-7/16" 33-7/8" 5-7/8" 6-11/16" 35-1/4" 33-7/8" 43-5/16"
*DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
RAISED PANELS
FIREPLACE SURROUNDS
Q-757
B-401
B-403
B-402
B-410
B-414B-413
B-404
B-408B-409
B-403
L-501
L-506
L-504L-505
L-512
L-509
THESE FIXTURES ACCEPT A STANDARD BASE BULB UP TO 60 WATTSL-506
?Did You Know... #A910 Ask For our FREE Orac color catalog. Individual FREE Samples Available.
PART # A B CB-401 4-9/16" 6-5/16" 2-3/4"B-402 3-9/16" 8-11/16" 2-3/4"B-403 7-1/2" 7-1/2" 3-15/16"B-404 7-11/16" 12-3/8" 4-9/16"B-408 8-7/8" 15-3/4" 5-1/8"B-409 11-13/16" 13-3/4" 6-7/8"B-410 7-11/16" 19-11/16" 6-5/16"B-413 6-5/16" 8-7/8" 3-3/8"B-414 3-15/16" 8-5/8" 2-3/4"
PART # A B CL-501 14-3/8" 8-1/4" 8-11/16"L-504 12" 5-7/8" 5-7/8"L-505 16-1/8" 4-1/2" 6-1/2"L-506 15-3/8" 6-1/8" 7-1/2"L-509 11-7/16" 6-11/16" 5-11/16"L-512 12" 4-15/16" 6-1/8"
*DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
CORBELS
NotE: MEASuREMENtS ARE AppRoxIMAtE.
WALL LIGHT SCONCES
Q-758
Adhesive/Filler Yields
Adhesives
FX-200
FX-210
Miter Boxes
FDP-500FDP-600
orAC Fix, orAC deCoFix Pro & orAC deCoFix hYdrotechnical information
Keep ORAC Fix or ORACDecoFix Pro, cool (between +5°C/41°F and +30°C/86°F) and dry, can be stored for 12 months in original, unopened package
We highly recommend testing your finish on a sample or scrap piece before installing.
ZX13 -Miter BoxDecofix PRO• For mounting elements within the Polyurethane Collection. • For mounting and joining elements within the duropolymer Collection.
Decofix HYDRO For exterior & Bathroom Applications• For mounting elements within the Polyurethane Collection.• For mounting and joining elements within duropolymer collection.
ORAC Fix Extra • For joining elements within the Polyurethane Collection in any application.
FDP-700
AdjustABle Miter Box & sAw Kit
ZX14 -SawFB-300 -Miter Box
Yields are approximate & based on average conditions & installation techniques.
?Did You Know...
Additional features for easy fixation and handling.Moulding Max. Ht. 10.83" & Width 8.86" (for 45 degree)
Cuts Any Degree
MLDG. #
STANDARDPLUS
CARTRIDGEFDP-500
STANDARDPLUSTUB
FDP-600
EXTRAADHESIVE
CARTRIDGEFX-200
EXTRAADHESIVE
TUBEFX-210
P1020, P2020, P3020, P5021, P6020, P7050, P8020, P8030, P9040, P9050, C215, C230,
C240, C250, C260, C322,C602
60 ft. 400 ft. 150joints
35joints
P4020, P5020, P5051, P7010, P7020, P7030, P7040, P7060, P7070, P8040, P8050, P8060, P9010, P9020, P9900, P9901,
C200, C201, C212, C213, C214,C220, C302, C303,
C304, C305, C308, C321,C400
45 ft. 300 ft. 100joints
25joints
P5050, P7080, C211, C216, C217, C218, C219, C300, C301, C307, C331, C332, C333, C334, C335, C336, C351, C353, C354, C355, C356, C357, C358, C360, C402, C422, C900, C901,
C902, C990
30 ft. 200 ft. 80joints
20jointsPRODUCT
REMOVABLEWITH
OPENTIME BASE TEMP. PREP.
ORAC FIX EXTRA JOINT
ADHESIVE
AcetoneBefore
Hardening
Approx.30 min.
Polyurethane(Diphenylmethane 4,4
- diisocyanate)
Between 5°C/41°F and
30°C/86°FORAC
DECOFIX PRO
WaterBefore
Hardening
Approx.15 min.
Synthetic copolymer dispersion
Between 5°C/41°F and
30°C/86°F
ORACDECOFIX HYDRO
Water and 1% SoapBefore
Hardening
Approx.10 min.
One componentAdh/Sealant Base On
MS Polymer
Between 5°C/41°F and
30°C/86°F
PART #PCS. PER CARTON DESCRPTION
FDP-700 12 Cartridge-290 ml (9-3/4 oz.)
PART #PCS. PER CARTON DESCRPTION
FX-200 12 Cartridge-310 ml (10-1/2 oz.)
FX-210 24 Tube-80 ml(2-3/4 oz.)
PART # PCS. PER CARTON Max. Width & Height of Mldg.FB-300 1 Width & Height 10.83"ZX13 1 Width - 6.10" & Height - 4.92" ZX14 1 ----
PART #PCS. PER CARTON DESCRPTION
FDP-500 12 Cartridge- 310 ml (10-1/2 oz.)
FDP-600 1 Tub- 8.8 lbs.
FB-10 1 pc per carton
MITER BOXES CAN BE USED FOR ORAC DECOR & SURROUNDS MOULDINGS
ADHESIVES & MITER BOXES
Q-759
Our Affordable Low-density Extruded Polystyrene Crown Mouldings Offer
Practical And Simple Installation.• All mouldings available in 8' lengths• No primer needed• Ready for water/acrylic based paint• Easy to install• Water based adhesive only• No nails or screws needed
CLASS A FIRE RATING
10.48 fl.oz.each cartridge covers approximately 30' of moulding
6-1/8"
5-3/4"
8-3/8"
5-1/8"
5-1/8"
7-1/4"
4-3/16"
3"
3"
3-1/8"
3-1/8"
4-7/16"3-1/8"
3-3/8"4-5/8"
2-3/4"
2-3/4"
3-7/8"
3-3/4"
3-7/8"
5-7/16"4-3/8"
4-3/8"6-1/8"
EPS-10
EPS-4
EPS-8
EPS-12
EPS-16
EPS-22
EPS-28
EPS-26
EPS-ADH
Low-density extruded PoLystyrene Crown MouLdings
Interior Millwork by Focal Point
Q-760
Note: We offer the complete line of Focal Point products. If you do not see the Focal Point part you are looking for, Please inquire.
Q-761
Athenian Leaves
Classic Egg & Dart
2313523145
Zoller Cove
112901118011280
St. James
1127011170
Georgian
1132011040
Monte Carlo
Egg & Dart Crown
10530-8
10700-8
Versailles Crown
10750
Profile Key
Face (F)
Height (H)
Projection (P)
Length (L) of 1 piece of moulding.Our moulding is typically made in 6'6", 8' or 12' lengths.( Lengths may vary slightly due to pattern repeats.)
PART # F H P R L23145 4-1/8" 3-1/4" 2-9/16" 2-1/8" 8'
PART # F H P R L23135 4-1/8" 3-1/4" 2-1/2" 1-1/4” 8'
PART # F H P R L10700-8 6-9/16" 5" 4-5/16" - 8'
PART # F H P R L10530-8 6-7/8" 5-1/16" 4-5/8" 1-3/4" 8'
PART # F H P R L10750-8 9-5/8" 6-7/8" 6-13/16 " - 8'
PART # F H P R L11280 6" 4-1/4" 4-1/4" - 12'11180 8-7/8" 6-3/16" 6-3/16" - 12'11290 12-3/8" 8-3/4" 8-3/4" - 12'
PART # F H P R L11170 6-1/4" 4-11/16" 4" - 12'11270 9" 7-7/16" 6-1/8" - 12'
PART # F H P R L11040 6" 4-3/8" 4-3/16" 3-7/16 12'11320 9-3/16" 6-7/8" 6" 5-1/4" 12'
Memorable Mouldings guide the eye and stir the spirit. They can elevate a room from mundane to marvelous!
High Density PolyurethaneDISTINCTIVE CROWN MOULDINGS
Q-762
W = Width H = Height P = Projection R = Design Repeat L = Length in Feet
Step up your style with our stair brackets. Reminiscent of the great mansions of Europe or the Antebellum South, our stair brackets are available in “right” or “left” configurations to match your staircase direction.
All brackets shown on this page are “right” brackets. Stair Brackets are sold in sets of two only.
Product featured:A. Rococo Right Bracket
License Number 99024Left Right
H
W
Rococo
GEoRGiAn FRiEzE 15205
99914 - Left99924 - Right 99114 - Left
99124 - Right
ADHESiVE
D’EVEREux FRiEzE 13080
WooDLAWn-SmALL coLoniAL
99014 - Left99024 - Right
FRiEzES
W H P11-7/8” 7-7/8” 3/4” W H P
8-1/4” 6-3/4” 15/16” W H P12” 7-1/2” 1/2”
H P R L7-1/2” 1-3/4” 7-1/8” 92-1/4”
H P R L8-3/8” 1-1/8” 7-1/2” 12’
Focal Point Adhesive 3 is especially formulated to be used on polyurethane moulding joints and seams. It welds pieces together when properly used, virtually eliminating callbacks for joint separation. Use one tube of adhesive for every 60 linear feet of moulding. Immediately remove excess adhesive that bleeds on to the face of the moulding.NOTE: PL Premium Polyurethane Construction Adhesive is the only recommended suitable alternative. Our warranty hinges on the use of Focal Point Adhesive 3 or PL Premium Polyurethane Construction Adhesive.PART# 33333
STAiR BRAcKETSStylish Stairways
STAIR BRACKETS & FRIEZES
Q-763
AcAnthus
Note: We offer Focal Point’s full line of products. If you do not see the Focal Point part you are looking for, Please inquire.
RenAissAnce RotundA
eGG & dARt eMMA
shell & BellfloweR VictoRiA
D (Diameter)
C (Canopy)
A “canopy” is the decorative cover that is provided with the light fixture. This is installed against the medallion to cover and allow access to the electrical box opening. if you would like to use the canopy, Focal Point provides maximum “canopy size” information. unless otherwise noted, the center holes of the medallions are approximately 4”
PART #diA.(d)
CANOPY(C) PROj.
81012 12” 5” 1/2”81018 18” 5” 5/8”81031 30-1/4” 5” 1-1/2”81041 41” 5” 3/4”
PART #diA.(d)
CANOPY(C) PROj.
81618 17-7/8” 4-3/8” 1-1/8”81624 23-7/8” 5” 1-1/8”81641 41” 6-1/2” 1-3/4”
PART #diA.(d)
CANOPY(C) PROj.
83012 12-3/8” 5” 1-3/16”83018 18-1/2” 5” 1-1/8”83024 24-5/16” 5-1/2” 1-3/8”83031 31-3/8” 5-1/2” 1-1/2”83034 34” 5-3/4” 2-3/4”83041 40-7/8” 5-1/2” 2-1/8”
PART #diA.(d)
CANOPY(C) PROj.
83324 24-7/16" 5-1/2" 1-1/2”83331 31-7/16" 5-1/2" 1-1/2”
PART #diA.(d)
CANOPY(C) PROj.
81024 23-11/16” 5” 2-3/4”
PART #diA.(d)
CANOPY(C) PROj.
83424 24-3/8" 5-1/2" 1-5/8”
PART #diA.(d)
CANOPY(C) PROj.
87216 16" 4" 1”
“Art for your ceiling”... medallions come in a wide array of styles, from classical to contemporary. “Enlighten” your light fixtures and your interior with medallions.
PRIMED WHITE UNFINISHED MEDALLIONS
Q-764
Whether searching for a classic shell design, such as the Gainsborough or Regency, or a more contemporary feel, like the Sonoma or Monterey, niches provide an opportunity to ornament an area, highlight a special piece of artwork or create texture and depth on an otherwise flat space.
Gainsborough91000
27-1/4"W x 56"H91350
32-7/8"W x 58-1/2"H
Regency91200
27-1/4"W x 56"H91300
32-7/8"W x 58-1/2"H
Chatham91240
29-3/4"W x 57-1/8"H
Waverly II91630
22-3/4"W x 43-3/8"H91770
16-3/4"W x 36-1/2"H
Waverly91790
16-3/4"W x 36-1/2"HSonoma
9159016-7/8"W x 36"H
9184029-3/4"W x 56-3/4"H
Monterey91520
16-7/8"W x 36"H
Bellemeade91410
15-5/8"W x 29-7/8"H
Adding Character & DepthNICHES
Q-765
Geneva Shell Niche with Plinths, available in 3 sizes. The cap is separated from the casing by plinths, and curved-plywood used for the backing. Installed with Wood Casings 91110 or 91220 (sold separately), the overall niche can be any height, and made to fit your application.Osborne Shell Niche Cap Kit, available in 3 sizes. Each kit contains a niche cap, rim, two pilasters. Installed with Fluted Pilasters 92260 (sold with kit). The backing is created using curved plywood or tempered hardboard cut to the desired size.
*Fits standard 2 x 4 construction
Shell niche caps are used for two reasons - when a standard niche is not wide, tall or deep enough, or the project calls for shelves within the niche. The shell niche cap has a groove molded into the underside, into which bending plywood can be inserted and attached to the framing.
60”
PILASTER
Free Focal Point
color catalog is
available upon request.
CASINGS - 8 Ft. Lengths
No. 91110(use with 91001, 91003, niche cap)
No. 91220(use with 91002 niche cap)
Gainsborough Regency Chatham Waverly II Waverly Bellemeade Sonoma MontereyPRICE $526.24 $667.92 $457.60 $579.92 $483.12 $271.92 $183.92 $167.20 $167.20 $175.12 $439.12 $175.12
A 27-1/4" 32-7/8" 27-1/4" 32-7/8" 29-3/4" 22-3/4" 16-3/4" 16-3/4" 15-5/8" 16-7/8" 29-3/4" 16-7/8"B 9" 9-7/8" 9" 9-7/8" 10" 7-5/8" 4" 4" 6-3/4" 5" 8-1/4" 5"C 56" 58-1/2" 56" 58-1/2" 57-1/8" 43-3/8" 36-1/2" 36-1/2" 29-5/8" 36" 56-3/4" 36"D 25-1/2" 31" 25-1/2" 31" 24" 17-3/4" 12-3/4" 12-3/4" 10-1/2" 13" 25-1/4" 13"E 7-3/4" 9" 7-3/4" 9" 7-3/4" 6-5/16" 3-1/2" 3-1/2" 5" 3-1/2" 7-5/8" 3-1/2"F 53-5/8" 56-1/2" 53-5/8" 56-1/2" 53-5/8" 39-13/16" 34-1/2" 34-1/4" 25-13/16" 33-5/16" 53-3/4" 33-5/16"G 28" 33-1/2" 28" 33-1/2" 28" 21-3/8" 14-1/2" 14-1/2" 12-1/2" 14-1/2" 28" 14-1/2"H 9-1/4" 10-1/2" 9-1/4" 10-1/2" 9-1/4" 7-1/4" 4" 4" 6" 4" 9-1/4" 4"I 56-1/2" 59-1/2" 56-1/2" 59-1/2" 56" 42-1/2" 35-1/2" 35-1/2" 28-1/4" 35" 56" 35"J 5-7/8" 5-7/8" 5-7/8" 5-7/8" 2" 2-3/8" 1-7/8" 1-7/8" 2-5/16" 1-3/4" 2" 1-3/4"K 1-3/4" 1-3/4" 1-3/4" 1-3/4" 7/8" 9/16" 5/8" 5/8" 13/16" 1" 1-1/4" 1"L 34-3/4" 41" 34-3/4" 41" 31-5/16" 25-9/16" 18-1/4" 17-1/4" 16-5/8" 17-1/4" 31-5/16" 17-3/4"M 3-1/8" 3-1/4" 3-1/8" 3-1/4" 3-1/8" 8-7/8" 6-1/4" 3-1/8" 6" 3-1/8" 3-1/8" 3-1/8"N 3-1/8" 3-1/8" 3-1/8" 3-1/8" 3-1/8" 7-1/2" 5-1/4" 3-1/8" 6-1/8" 3-1/8" 3-1/8" 3-1/8"O - - 33-1/2" 39" - - - - - - - -P - - 16-7/8" 21" - - - - - - - -Q - - 24-1/8" 29-3/4" - - - - - - - -R - - 13-3/8" 17-1/2" - - - - - - - -S 32-1/4" 39-1/4" - - - - - - - - - -T 8-1/8" 12-5/16" - - - - - - - - - -U 25-1/4" 31" - - - - - - - - - -V 11-5/8" 15-7/8" - - - - - - - - - -
PART # Osborne Geneva91004 91005 91006 91001 91002 91003
Overall
WIDTHA 42-1/2" 29-3/4" 37-3/16" 42-1/2" 29-3/4" 37-3/16"
DEPTHB 17" 10" 12" 17" 10" 12"
HEIGHTC 23-1/2" 16-1/8" 18-1/4" 23-1/2" 16-1/8" 18-1/4"
Inside
WIDTHD 36" 24" 28-3/4" 36" 24" 28-3/4"
DEPTHE 14-3/4" 8-1/2" 10" 14-3/4" 8-1/2" 10"
HEIGHTF 20-1/4" 13" 14-3/8" 20-1/4" 13" 14-3/8"
RoughOpening
WIDTHG 40" 28" 34" 40" 28" 34"
DEPTHH 16-1/2" 9-1/4" 11" 16-1/2" 9-1/4" 11"
HEIGHTI 22-1/4" 15-1/2" 17-1/2" 22-1/4" 15-1/2" 17-1/2"
CASING N/A N/A N/A 91110 91220 91110PILASTER 60" - included in kit N/A N/A N/A
Gainsborough Regency Chatham Waverly II Waverly Bellemeade Sonoma MontereyPART # 91000 91350 91200 91300 91240 91630 91770* 91790* 91410 91590* 91840 91520*
A 27-1/4" 32-7/8" 27-1/4" 32-7/8" 29-3/4" 22-3/4" 16-3/4" 16-3/4" 15-5/8" 16-7/8" 29-3/4" 16-7/8"B 9" 9-7/8" 9" 9-7/8" 10" 7-5/8" 4" 4" 6-3/4" 5" 8-1/4" 5"C 56" 58-1/2" 56" 58-1/2" 57-1/8" 43-3/8" 36-1/2" 36-1/2" 29-5/8" 36" 56-3/4" 36"D 25-1/2" 31" 25-1/2" 31" 24" 17-3/4" 12-3/4" 12-3/4" 10-1/2" 13" 25-1/4" 13"E 7-3/4" 9" 7-3/4" 9" 7-3/4" 6-5/16" 3-1/2" 3-1/2" 5" 3-1/2" 7-5/8" 3-1/2"F 53-5/8" 56-1/2" 53-5/8" 56-1/2" 53-5/8" 39-13/16" 34-1/2" 34-1/4" 25-13/16" 33-5/16" 53-3/4" 33-5/16"G 28" 33-1/2" 28" 33-1/2" 28" 21-3/8" 14-1/2" 14-1/2" 12-1/2" 14-1/2" 28" 14-1/2"H 9-1/4" 10-1/2" 9-1/4" 10-1/2" 9-1/4" 7-1/4" 4" 4" 6" 4" 9-1/4" 4"I 56-1/2" 59-1/2" 56-1/2" 59-1/2" 56" 42-1/2" 35-1/2" 35-1/2" 28-1/4" 35" 56" 35"J 5-7/8" 5-7/8" 5-7/8" 5-7/8" 2" 2-3/8" 1-7/8" 1-7/8" 2-5/16" 1-3/4" 2" 1-3/4"K 1-3/4" 1-3/4" 1-3/4" 1-3/4" 7/8" 9/16" 5/8" 5/8" 13/16" 1" 1-1/4" 1"L 34-3/4" 41" 34-3/4" 41" 31-5/16" 25-9/16" 18-1/4" 17-1/4" 16-5/8" 17-1/4" 31-5/16" 17-3/4"M 3-1/8" 3-1/4" 3-1/8" 3-1/4" 3-1/8" 8-7/8" 6-1/4" 3-1/8" 6" 3-1/8" 3-1/8" 3-1/8"N 3-1/8" 3-1/8" 3-1/8" 3-1/8" 3-1/8" 7-1/2" 5-1/4" 3-1/8" 6-1/8" 3-1/8" 3-1/8" 3-1/8"O - - 33-1/2" 39" - - - - - - - -P - - 16-7/8" 21" - - - - - - - -Q - - 24-1/8" 29-3/4" - - - - - - - -R - - 13-3/8" 17-1/2" - - - - - - - -S 32-1/4" 39-1/4" - - - - - - - - - -T 8-1/8" 12-5/16" - - - - - - - - - -U 25-1/4" 31" - - - - - - - - - -V 11-5/8" 15-7/8" - - - - - - - - - -
PART # Osborne Geneva91004 91005 91006 91001 91002 91003
Overall
WIDTHA 42-1/2" 29-3/4" 37-3/16" 42-1/2" 29-3/4" 37-3/16"
DEPTHB 17" 10" 12" 17" 10" 12"
HEIGHTC 23-1/2" 16-1/8" 18-1/4" 23-1/2" 16-1/8" 18-1/4"
Inside
WIDTHD 36" 24" 28-3/4" 36" 24" 28-3/4"
DEPTHE 14-3/4" 8-1/2" 10" 14-3/4" 8-1/2" 10"
HEIGHTF 20-1/4" 13" 14-3/8" 20-1/4" 13" 14-3/8"
RoughOpening
WIDTHG 40" 28" 34" 40" 28" 34"
DEPTHH 16-1/2" 9-1/4" 11" 16-1/2" 9-1/4" 11"
HEIGHTI 22-1/4" 15-1/2" 17-1/2" 22-1/4" 15-1/2" 17-1/2"
CASING N/A N/A N/A 91110 91220 91110PILASTER 60" - included in kit N/A N/A N/A
Adding Character & Depth
Create A Point Of Focus
NICHES
NICHE SHELL CAPS
See pages 873-884 for our Powder Coated Balusters.
Q-766
*PLEASE NOTE: Flexible Mouldings May Shrink Up To 2% During Manufacturing (slightly more on larger profiles) in Size Compared To Rigid Mouldings.
FLEXIBLE MOULDINGS ARE A NON-STOCK ITEM & HAVE A 3 WEEK LEAD TIME. EACH PIECE IS CUSTOM MADE, AND DEPENDING ON APPLICATION, RADIUS INFORMATION AND OR TEMPLATES MAY BE REQUIRED.
Achieve Radii Never Before Possible- Available In 6 Ft. to 12 Ft. Lengths in even 1 Ft. Increments
9/16"
4-1/
4"
9/16"
3-1/
4"
1"
1/2"
1-1/2"
3/4"
1-1/16"
1-1/
16"
3/4"
3/4"
1/2"
1/2"
1/4"
1/2"
1/4"
3/4"
3/8"
1"
* BECAUSE EACH PIECE IS MADE TO ORDER, THESE MOULDINGS ARE NON-RETURNABLE.
3/4" THICK
Max Radius 8" 96” Length Design Repeat: 7/8”
5/8”
1”
IMPORTANT NOTES:1. Material should be removed from box and stored flat
when received. Allow it to come to room temperature 24 hours prior to installation.
2. For best results, the use of construction type adhesive in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing the material in position while adhesives bond.
3. "Made-To-Fit" mouldings can be cut, shaped or sanded using normal woodworking equipment.
4. The use of water based stain such as Miniwax works well. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.
5. All paints work well. Best results are seen when a primer coat is applied. When using Alkyd Enamels or Oil based Enamels a water base or Latex undercoat is required. Never paint before installation. The material is flexible and the paint may crack during installation.
T-1X225 (3/4" x 2-1/4")
T-WM1X4 (3/4" x 3-1/2")
T-WM1X5 (3/4" x 4-1/2")
T-WM1X6 (3/4" x 5-1/2")
T-WM1X8 (3/4" x 7-1/4")
C-SM425C-BB6
T-WM120
C-NJ714
T-WM103
PART # DESCRIPTIONA-2 2 oz. Adhesive (Approx 50' med bead)
AA-2 2 oz. Adhesive Accelerator (Approx 150' Coverage)
T-WM105
T-WM108
DE-903 (1"W x 3/8" Thick)DE-904 (3/4"W x 1/4" Thick)DE-905 (1/2"W x 1/4" Thick)
DEM-303Must be purchased in full length pieces
DEM-303F - FlexibleMust be purchased in full length pieces
FLEXIBLE "MADE TO FIT" MOULDINGS
See pages 873-884 for our Powder Coated Balusters.
Q-767
1/2"
3-1/
2"
1-1/4"
2"
11/16"
2-1/
4"
11/16"
2-1/
4"
1"
3-1/
2"
11/16"
3-1/
4"
11/16"
2-1/
4"
11/16"
2-1/
4"
Concave (inside) / Convex (Outside) Radius Applications:Although radius information may not be required for this application, Profiles can not achieve a tighter radius than 3 times the width of the mould-ing. Example: A 3" wide moulding can achieve a radius of no tighter than 9". Attempting to do so may result in cracking.
INSIDERADIUS
(CONCAVE)
OUTSIDERADIUS
(CONVEX)
Radius
Diameter
HeightWidth
Elliptical Arch
Casing Applications:Half Round:When ordering half circle radius casing, measure the distance across the opening at the widest point. This is the diameter of the circle (see diagram). The radius (height) dimension should be one half the length of the diameter. Specify the radius on your order.Eyebrow:When ordering arches or arcs (also called eyebrows or sectionals), measure the height and width of the arch (see diagram). Specify these dimensions when ordering. Templates must be furnished when ordering elliptical and oval casings.Elliptical:Template required.
* BECAUSE EACH PIECE IS MADE TO ORDER, THESE MOULDINGS ARE NON-RETURNABLE.
T-SL311
T-WM180. T-WM493. T-WM356
T-WM445
T-RB300
T-WM327 T-WM376
FLEXIBLE "MADE TO FIT" MOULDINGS