Post on 02-Feb-2021
Pablo Capellán -pablo@optimus3d.es
Applied experience on aeronautics
for additively manufactured parts
mailto:pablo@optimus3d.es?subject=About your presentation
2014 2015 2016 2017 2018 2019
Foundation Engineering and polymers 3D printing
The multinationalCompany, Supplier of automotivesprings, becomeshareholder
New facilities in Miñano, technologicalpark1000m2
First metal system
First Service bureau in Spain with thistechnology
AdquiredScaningresources
ISO9100
New metal system
ADDitive INNovation
Parts68%
Engineering24%
Consulting8%
More than 200 industrial partners
Business lines of services
Intro
Personally involvedwith customer challenges
Tailored solutionsTo reduce overall costs
Latest machinery- SLM- MJF- FDM- SLA
Workflow ownershipFrom the design board toquality control
Planning consciousProviding accurate deadlines
- Product design- Engineering & simulation
partner- Testing facilities- Scanning & reverse
engineering- Manufacturing- CMM
Our services
Success cases… WIP
Success cases… WorkInProcess
Success cases… WIP
Success cases… WIP
2000 references shifted into AM within 2 years
Scope & approach
• Each request is unique
- Review application
- Define alternatives’ spectrum
- Check viability
- Analyse/simulate build
Proceed with manufacturing
Success cases
Goal: Reduce weight in the metallic parts of the satellite antenna
End fittings At least 30%
- Weight reduction (- 63 %).
- Cost reduction (-54%).
- New engineering vision
- Lead Time reduction (-63%).
- Overall cost reduction
Success cases
Success cases
Adding value Geometry
• Design with generative design for additive process
Adding value
• Broad spectrum of parameters to modify
- Border & hatch patterns
- Laser power output & advance speed
- Surface finishing vs Stress
Adding value
• Broad spectrum of parameters to modify
- Border & hatch patterns
- Laser power output & advance speed
- Surface finishing vs Stress
Adding value
• Broad spectrum of parameters to modify
- Border & hatch patterns
- Laser power output & advance speed
- Surface finishing vs Stress
Adding value
• Broad spectrum of parameters to modify
- Border & hatch patterns
- Laser power output & advance speed
- Surface finishing vs Stress
Edificio E5, Leonardo da Vinci, 9Parque Tecnológico de Álava01510 Vitoria - Gasteiz, Araba (Spain)
www.optimus3d.espablo@optimus3d.es(+34) 682 687 202
mailto:pablo@optimus3d.es?subject=About your presentation